diff options
Diffstat (limited to 'drivers/ata/libata-scsi.c')
| -rw-r--r-- | drivers/ata/libata-scsi.c | 3322 |
1 files changed, 3322 insertions, 0 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c new file mode 100644 index 00000000000..d168e341366 --- /dev/null +++ b/drivers/ata/libata-scsi.c @@ -0,0 +1,3322 @@ +/* + * libata-scsi.c - helper library for ATA + * + * Maintained by: Jeff Garzik <jgarzik@pobox.com> + * Please ALWAYS copy linux-ide@vger.kernel.org + * on emails. + * + * Copyright 2003-2004 Red Hat, Inc. All rights reserved. + * Copyright 2003-2004 Jeff Garzik + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + * libata documentation is available via 'make {ps|pdf}docs', + * as Documentation/DocBook/libata.* + * + * Hardware documentation available from + * - http://www.t10.org/ + * - http://www.t13.org/ + * + */ + +#include <linux/kernel.h> +#include <linux/blkdev.h> +#include <linux/spinlock.h> +#include <scsi/scsi.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_eh.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsi_transport.h> +#include <linux/libata.h> +#include <linux/hdreg.h> +#include <asm/uaccess.h> + +#include "libata.h" + +#define SECTOR_SIZE 512 + +typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, const u8 *scsicmd); + +static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); +static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev); +static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun); + + +#define RW_RECOVERY_MPAGE 0x1 +#define RW_RECOVERY_MPAGE_LEN 12 +#define CACHE_MPAGE 0x8 +#define CACHE_MPAGE_LEN 20 +#define CONTROL_MPAGE 0xa +#define CONTROL_MPAGE_LEN 12 +#define ALL_MPAGES 0x3f +#define ALL_SUB_MPAGES 0xff + + +static const u8 def_rw_recovery_mpage[] = { + RW_RECOVERY_MPAGE, + RW_RECOVERY_MPAGE_LEN - 2, + (1 << 7) | /* AWRE, sat-r06 say it shall be 0 */ + (1 << 6), /* ARRE (auto read reallocation) */ + 0, /* read retry count */ + 0, 0, 0, 0, + 0, /* write retry count */ + 0, 0, 0 +}; + +static const u8 def_cache_mpage[CACHE_MPAGE_LEN] = { + CACHE_MPAGE, + CACHE_MPAGE_LEN - 2, + 0, /* contains WCE, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, /* contains DRA, needs to be 0 for logic */ + 0, 0, 0, 0, 0, 0, 0 +}; + +static const u8 def_control_mpage[CONTROL_MPAGE_LEN] = { + CONTROL_MPAGE, + CONTROL_MPAGE_LEN - 2, + 2, /* DSENSE=0, GLTSD=1 */ + 0, /* [QAM+QERR may be 1, see 05-359r1] */ + 0, 0, 0, 0, 0xff, 0xff, + 0, 30 /* extended self test time, see 05-359r1 */ +}; + +/* + * libata transport template. libata doesn't do real transport stuff. + * It just needs the eh_timed_out hook. + */ +struct scsi_transport_template ata_scsi_transport_template = { + .eh_strategy_handler = ata_scsi_error, + .eh_timed_out = ata_scsi_timed_out, + .user_scan = ata_scsi_user_scan, +}; + + +static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + done(cmd); +} + +/** + * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. + * @sdev: SCSI device for which BIOS geometry is to be determined + * @bdev: block device associated with @sdev + * @capacity: capacity of SCSI device + * @geom: location to which geometry will be output + * + * Generic bios head/sector/cylinder calculator + * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS) + * mapping. Some situations may arise where the disk is not + * bootable if this is not used. + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero. + */ +int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int geom[]) +{ + geom[0] = 255; + geom[1] = 63; + sector_div(capacity, 255*63); + geom[2] = capacity; + + return 0; +} + +/** + * ata_cmd_ioctl - Handler for HDIO_DRIVE_CMD ioctl + * @scsidev: Device to which we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ + +int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[4], *argbuf = NULL; + int argsize = 0; + struct scsi_sense_hdr sshdr; + enum dma_data_direction data_dir; + + if (arg == NULL) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + + if (args[3]) { + argsize = SECTOR_SIZE * args[3]; + argbuf = kmalloc(argsize, GFP_KERNEL); + if (argbuf == NULL) { + rc = -ENOMEM; + goto error; + } + + scsi_cmd[1] = (4 << 1); /* PIO Data-in */ + scsi_cmd[2] = 0x0e; /* no off.line or cc, read from dev, + block count in sector count field */ + data_dir = DMA_FROM_DEVICE; + } else { + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + data_dir = DMA_NONE; + } + + scsi_cmd[0] = ATA_16; + + scsi_cmd[4] = args[2]; + if (args[0] == WIN_SMART) { /* hack -- ide driver does this too... */ + scsi_cmd[6] = args[3]; + scsi_cmd[8] = args[1]; + scsi_cmd[10] = 0x4f; + scsi_cmd[12] = 0xc2; + } else { + scsi_cmd[6] = args[1]; + } + scsi_cmd[14] = args[0]; + + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + if (scsi_execute_req(scsidev, scsi_cmd, data_dir, argbuf, argsize, + &sshdr, (10*HZ), 5)) { + rc = -EIO; + goto error; + } + + /* Need code to retrieve data from check condition? */ + + if ((argbuf) + && copy_to_user(arg + sizeof(args), argbuf, argsize)) + rc = -EFAULT; +error: + kfree(argbuf); + return rc; +} + +/** + * ata_task_ioctl - Handler for HDIO_DRIVE_TASK ioctl + * @scsidev: Device to which we are issuing command + * @arg: User provided data for issuing command + * + * LOCKING: + * Defined by the SCSI layer. We don't really care. + * + * RETURNS: + * Zero on success, negative errno on error. + */ +int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) +{ + int rc = 0; + u8 scsi_cmd[MAX_COMMAND_SIZE]; + u8 args[7]; + struct scsi_sense_hdr sshdr; + + if (arg == NULL) + return -EINVAL; + + if (copy_from_user(args, arg, sizeof(args))) + return -EFAULT; + + memset(scsi_cmd, 0, sizeof(scsi_cmd)); + scsi_cmd[0] = ATA_16; + scsi_cmd[1] = (3 << 1); /* Non-data */ + /* scsi_cmd[2] is already 0 -- no off.line, cc, or data xfer */ + scsi_cmd[4] = args[1]; + scsi_cmd[6] = args[2]; + scsi_cmd[8] = args[3]; + scsi_cmd[10] = args[4]; + scsi_cmd[12] = args[5]; + scsi_cmd[14] = args[0]; + + /* Good values for timeout and retries? Values below + from scsi_ioctl_send_command() for default case... */ + if (scsi_execute_req(scsidev, scsi_cmd, DMA_NONE, NULL, 0, &sshdr, + (10*HZ), 5)) + rc = -EIO; + + /* Need code to retrieve data from check condition? */ + return rc; +} + +int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) +{ + int val = -EINVAL, rc = -EINVAL; + + switch (cmd) { + case ATA_IOC_GET_IO32: + val = 0; + if (copy_to_user(arg, &val, 1)) + return -EFAULT; + return 0; + + case ATA_IOC_SET_IO32: + val = (unsigned long) arg; + if (val != 0) + return -EINVAL; + return 0; + + case HDIO_DRIVE_CMD: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_cmd_ioctl(scsidev, arg); + + case HDIO_DRIVE_TASK: + if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO)) + return -EACCES; + return ata_task_ioctl(scsidev, arg); + + default: + rc = -ENOTTY; + break; + } + + return rc; +} + +/** + * ata_scsi_qc_new - acquire new ata_queued_cmd reference + * @dev: ATA device to which the new command is attached + * @cmd: SCSI command that originated this ATA command + * @done: SCSI command completion function + * + * Obtain a reference to an unused ata_queued_cmd structure, + * which is the basic libata structure representing a single + * ATA command sent to the hardware. + * + * If a command was available, fill in the SCSI-specific + * portions of the structure with information on the + * current command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Command allocated, or %NULL if none available. + */ +struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, + struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + struct ata_queued_cmd *qc; + + qc = ata_qc_new_init(dev); + if (qc) { + qc->scsicmd = cmd; + qc->scsidone = done; + + if (cmd->use_sg) { + qc->__sg = (struct scatterlist *) cmd->request_buffer; + qc->n_elem = cmd->use_sg; + } else { + qc->__sg = &qc->sgent; + qc->n_elem = 1; + } + } else { + cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); + done(cmd); + } + + return qc; +} + +/** + * ata_dump_status - user friendly display of error info + * @id: id of the port in question + * @tf: ptr to filled out taskfile + * + * Decode and dump the ATA error/status registers for the user so + * that they have some idea what really happened at the non + * make-believe layer. + * + * LOCKING: + * inherited from caller + */ +void ata_dump_status(unsigned id, struct ata_taskfile *tf) +{ + u8 stat = tf->command, err = tf->feature; + + printk(KERN_WARNING "ata%u: status=0x%02x { ", id, stat); + if (stat & ATA_BUSY) { + printk("Busy }\n"); /* Data is not valid in this case */ + } else { + if (stat & 0x40) printk("DriveReady "); + if (stat & 0x20) printk("DeviceFault "); + if (stat & 0x10) printk("SeekComplete "); + if (stat & 0x08) printk("DataRequest "); + if (stat & 0x04) printk("CorrectedError "); + if (stat & 0x02) printk("Index "); + if (stat & 0x01) printk("Error "); + printk("}\n"); + + if (err) { + printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err); + if (err & 0x04) printk("DriveStatusError "); + if (err & 0x80) { + if (err & 0x04) printk("BadCRC "); + else printk("Sector "); + } + if (err & 0x40) printk("UncorrectableError "); + if (err & 0x10) printk("SectorIdNotFound "); + if (err & 0x02) printk("TrackZeroNotFound "); + if (err & 0x01) printk("AddrMarkNotFound "); + printk("}\n"); + } + } +} + +/** + * ata_scsi_device_suspend - suspend ATA device associated with sdev + * @sdev: the SCSI device to suspend + * @mesg: target power management message + * + * Request suspend EH action on the ATA device associated with + * @sdev and wait for the operation to complete. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = ata_scsi_find_dev(ap, sdev); + unsigned long flags; + unsigned int action; + int rc = 0; + + if (!dev) + goto out; + + spin_lock_irqsave(ap->lock, flags); + + /* wait for the previous resume to complete */ + while (dev->flags & ATA_DFLAG_SUSPENDED) { + spin_unlock_irqrestore(ap->lock, flags); + ata_port_wait_eh(ap); + spin_lock_irqsave(ap->lock, flags); + } + + /* if @sdev is already detached, nothing to do */ + if (sdev->sdev_state == SDEV_OFFLINE || + sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) + goto out_unlock; + + /* request suspend */ + action = ATA_EH_SUSPEND; + if (mesg.event != PM_EVENT_SUSPEND) + action |= ATA_EH_PM_FREEZE; + ap->eh_info.dev_action[dev->devno] |= action; + ap->eh_info.flags |= ATA_EHI_QUIET; + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + /* wait for EH to do the job */ + ata_port_wait_eh(ap); + + spin_lock_irqsave(ap->lock, flags); + + /* If @sdev is still attached but the associated ATA device + * isn't suspended, the operation failed. + */ + if (sdev->sdev_state != SDEV_OFFLINE && + sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL && + !(dev->flags & ATA_DFLAG_SUSPENDED)) + rc = -EIO; + + out_unlock: + spin_unlock_irqrestore(ap->lock, flags); + out: + if (rc == 0) + sdev->sdev_gendev.power.power_state = mesg; + return rc; +} + +/** + * ata_scsi_device_resume - resume ATA device associated with sdev + * @sdev: the SCSI device to resume + * + * Request resume EH action on the ATA device associated with + * @sdev and return immediately. This enables parallel + * wakeup/spinup of devices. + * + * LOCKING: + * Kernel thread context (may sleep). + * + * RETURNS: + * 0. + */ +int ata_scsi_device_resume(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = ata_scsi_find_dev(ap, sdev); + struct ata_eh_info *ehi = &ap->eh_info; + unsigned long flags; + unsigned int action; + + if (!dev) + goto out; + + spin_lock_irqsave(ap->lock, flags); + + /* if @sdev is already detached, nothing to do */ + if (sdev->sdev_state == SDEV_OFFLINE || + sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) + goto out_unlock; + + /* request resume */ + action = ATA_EH_RESUME; + if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND) + __ata_ehi_hotplugged(ehi); + else + action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET; + ehi->dev_action[dev->devno] |= action; + + /* We don't want autopsy and verbose EH messages. Disable + * those if we're the only device on this link. + */ + if (ata_port_max_devices(ap) == 1) + ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET; + + ata_port_schedule_eh(ap); + + out_unlock: + spin_unlock_irqrestore(ap->lock, flags); + out: + sdev->sdev_gendev.power.power_state = PMSG_ON; + return 0; +} + +/** + * ata_to_sense_error - convert ATA error to SCSI error + * @id: ATA device number + * @drv_stat: value contained in ATA status register + * @drv_err: value contained in ATA error register + * @sk: the sense key we'll fill out + * @asc: the additional sense code we'll fill out + * @ascq: the additional sense code qualifier we'll fill out + * @verbose: be verbose + * + * Converts an ATA error into a SCSI error. Fill out pointers to + * SK, ASC, and ASCQ bytes for later use in fixed or descriptor + * format sense blocks. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, + u8 *ascq, int verbose) +{ + int i; + + /* Based on the 3ware driver translation table */ + static const unsigned char sense_table[][4] = { + /* BBD|ECC|ID|MAR */ + {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command + /* BBD|ECC|ID */ + {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command + /* ECC|MC|MARK */ + {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error + /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */ + {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error + /* MC|ID|ABRT|TRK0|MARK */ + {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready + /* MCR|MARK */ + {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready + /* Bad address mark */ + {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field + /* TRK0 */ + {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error + /* Abort & !ICRC */ + {0x04, ABORTED_COMMAND, 0x00, 0x00}, // Aborted command Aborted command + /* Media change request */ + {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline + /* SRV */ + {0x10, ABORTED_COMMAND, 0x14, 0x00}, // ID not found Recorded entity not found + /* Media change */ + {0x08, NOT_READY, 0x04, 0x00}, // Media change FIXME: faking offline + /* ECC */ + {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error + /* BBD - block marked bad */ + {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error + {0xFF, 0xFF, 0xFF, 0xFF}, // END mark + }; + static const unsigned char stat_table[][4] = { + /* Must be first because BUSY means no other bits valid */ + {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now + {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault + {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now + {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered + {0xFF, 0xFF, 0xFF, 0xFF}, // END mark + }; + + /* + * Is this an error we can process/parse + */ + if (drv_stat & ATA_BUSY) { + drv_err = 0; /* Ignore the err bits, they're invalid */ + } + + if (drv_err) { + /* Look for drv_err */ + for (i = 0; sense_table[i][0] != 0xFF; i++) { + /* Look for best matches first */ + if ((sense_table[i][0] & drv_err) == + sense_table[i][0]) { + *sk = sense_table[i][1]; + *asc = sense_table[i][2]; + *ascq = sense_table[i][3]; + goto translate_done; + } + } + /* No immediate match */ + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "error 0x%02x\n", id, drv_err); + } + + /* Fall back to interpreting status bits */ + for (i = 0; stat_table[i][0] != 0xFF; i++) { + if (stat_table[i][0] & drv_stat) { + *sk = stat_table[i][1]; + *asc = stat_table[i][2]; + *ascq = stat_table[i][3]; + goto translate_done; + } + } + /* No error? Undecoded? */ + if (verbose) + printk(KERN_WARNING "ata%u: no sense translation for " + "status: 0x%02x\n", id, drv_stat); + + /* We need a sensible error return here, which is tricky, and one + that won't cause people to do things like return a disk wrongly */ + *sk = ABORTED_COMMAND; + *asc = 0x00; + *ascq = 0x00; + + translate_done: + if (verbose) + printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x " + "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", + id, drv_stat, drv_err, *sk, *asc, *ascq); + return; +} + +/* + * ata_gen_ata_desc_sense - Generate check condition sense block. + * @qc: Command that completed. + * + * This function is specific to the ATA descriptor format sense + * block specified for the ATA pass through commands. Regardless + * of whether the command errored or not, return a sense + * block. Copy all controller registers into the sense + * block. Clear sense key, ASC & ASCQ if there is no error. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ +void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->result_tf; + unsigned char *sb = cmd->sense_buffer; + unsigned char *desc = sb + 8; + int verbose = qc->ap->ops->error_handler == NULL; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[1], &sb[2], &sb[3], verbose); + sb[1] &= 0x0f; + } + + /* + * Sense data is current and format is descriptor. + */ + sb[0] = 0x72; + + desc[0] = 0x09; + + /* + * Set length of additional sense data. + * Since we only populate descriptor 0, the total + * length is the same (fixed) length as descriptor 0. + */ + desc[1] = sb[7] = 14; + + /* + * Copy registers into sense buffer. + */ + desc[2] = 0x00; + desc[3] = tf->feature; /* == error reg */ + desc[5] = tf->nsect; + desc[7] = tf->lbal; + desc[9] = tf->lbam; + desc[11] = tf->lbah; + desc[12] = tf->device; + desc[13] = tf->command; /* == status reg */ + + /* + * Fill in Extend bit, and the high order bytes + * if applicable. + */ + if (tf->flags & ATA_TFLAG_LBA48) { + desc[2] |= 0x01; + desc[4] = tf->hob_nsect; + desc[6] = tf->hob_lbal; + desc[8] = tf->hob_lbam; + desc[10] = tf->hob_lbah; + } +} + +/** + * ata_gen_fixed_sense - generate a SCSI fixed sense block + * @qc: Command that we are erroring out + * + * Leverage ata_to_sense_error() to give us the codes. Fit our + * LBA in here if there's room. + * + * LOCKING: + * inherited from caller + */ +void ata_gen_fixed_sense(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_taskfile *tf = &qc->result_tf; + unsigned char *sb = cmd->sense_buffer; + int verbose = qc->ap->ops->error_handler == NULL; + + memset(sb, 0, SCSI_SENSE_BUFFERSIZE); + + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + /* + * Use ata_to_sense_error() to map status register bits + * onto sense key, asc & ascq. + */ + if (qc->err_mask || + tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) { + ata_to_sense_error(qc->ap->id, tf->command, tf->feature, + &sb[2], &sb[12], &sb[13], verbose); + sb[2] &= 0x0f; + } + + sb[0] = 0x70; + sb[7] = 0x0a; + + if (tf->flags & ATA_TFLAG_LBA48) { + /* TODO: find solution for LBA48 descriptors */ + } + + else if (tf->flags & ATA_TFLAG_LBA) { + /* A small (28b) LBA will fit in the 32b info field */ + sb[0] |= 0x80; /* set valid bit */ + sb[3] = tf->device & 0x0f; + sb[4] = tf->lbah; + sb[5] = tf->lbam; + sb[6] = tf->lbal; + } + + else { + /* TODO: C/H/S */ + } +} + +static void ata_scsi_sdev_config(struct scsi_device *sdev) +{ + sdev->use_10_for_rw = 1; + sdev->use_10_for_ms = 1; +} + +static void ata_scsi_dev_config(struct scsi_device *sdev, + struct ata_device *dev) +{ + unsigned int max_sectors; + + /* TODO: 2048 is an arbitrary number, not the + * hardware maximum. This should be increased to + * 65534 when Jens Axboe's patch for dynamically + * determining max_sectors is merged. + */ + max_sectors = ATA_MAX_SECTORS; + if (dev->flags & ATA_DFLAG_LBA48) + max_sectors = ATA_MAX_SECTORS_LBA48; + if (dev->max_sectors) + max_sectors = dev->max_sectors; + + blk_queue_max_sectors(sdev->request_queue, max_sectors); + + /* + * SATA DMA transfers must be multiples of 4 byte, so + * we need to pad ATAPI transfers using an extra sg. + * Decrement max hw segments accordingly. + */ + if (dev->class == ATA_DEV_ATAPI) { + request_queue_t *q = sdev->request_queue; + blk_queue_max_hw_segments(q, q->max_hw_segments - 1); + } + + if (dev->flags & ATA_DFLAG_NCQ) { + int depth; + + depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + depth = min(ATA_MAX_QUEUE - 1, depth); + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); + } +} + +/** + * ata_scsi_slave_config - Set SCSI device attributes + * @sdev: SCSI device to examine + * + * This is called before we actually start reading + * and writing to the device, to configure certain + * SCSI mid-layer behaviors. + * + * LOCKING: + * Defined by SCSI layer. We don't really care. + */ + +int ata_scsi_slave_config(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev = __ata_scsi_find_dev(ap, sdev); + + ata_scsi_sdev_config(sdev); + + blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); + + if (dev) + ata_scsi_dev_config(sdev, dev); + + return 0; /* scsi layer doesn't check return value, sigh */ +} + +/** + * ata_scsi_slave_destroy - SCSI device is about to be destroyed + * @sdev: SCSI device to be destroyed + * + * @sdev is about to be destroyed for hot/warm unplugging. If + * this unplugging was initiated by libata as indicated by NULL + * dev->sdev, this function doesn't have to do anything. + * Otherwise, SCSI layer initiated warm-unplug is in progress. + * Clear dev->sdev, schedule the device for ATA detach and invoke + * EH. + * + * LOCKING: + * Defined by SCSI layer. We don't really care. + */ +void ata_scsi_slave_destroy(struct scsi_device *sdev) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + unsigned long flags; + struct ata_device *dev; + + if (!ap->ops->error_handler) + return; + + spin_lock_irqsave(ap->lock, flags); + dev = __ata_scsi_find_dev(ap, sdev); + if (dev && dev->sdev) { + /* SCSI device already in CANCEL state, no need to offline it */ + dev->sdev = NULL; + dev->flags |= ATA_DFLAG_DETACH; + ata_port_schedule_eh(ap); + } + spin_unlock_irqrestore(ap->lock, flags); +} + +/** + * ata_scsi_change_queue_depth - SCSI callback for queue depth config + * @sdev: SCSI device to configure queue depth for + * @queue_depth: new queue depth + * + * This is libata standard hostt->change_queue_depth callback. + * SCSI will call into this callback when user tries to set queue + * depth via sysfs. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Newly configured queue depth. + */ +int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) +{ + struct ata_port *ap = ata_shost_to_port(sdev->host); + struct ata_device *dev; + int max_depth; + + if (queue_depth < 1) + return sdev->queue_depth; + + dev = ata_scsi_find_dev(ap, sdev); + if (!dev || !ata_dev_enabled(dev)) + return sdev->queue_depth; + + max_depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); + max_depth = min(ATA_MAX_QUEUE - 1, max_depth); + if (queue_depth > max_depth) + queue_depth = max_depth; + + scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth); + return queue_depth; +} + +/** + * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate + * + * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY + * (to start). Perhaps these commands should be preceded by + * CHECK POWER MODE to see what power mode the device is already in. + * [See SAT revision 5 at www.t10.org] + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, + const u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + + tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; + tf->protocol = ATA_PROT_NODATA; + if (scsicmd[1] & 0x1) { + ; /* ignore IMMED bit, violates sat-r05 */ + } + if (scsicmd[4] & 0x2) + goto invalid_fld; /* LOEJ bit set not supported */ + if (((scsicmd[4] >> 4) & 0xf) != 0) + goto invalid_fld; /* power conditions not supported */ + if (scsicmd[4] & 0x1) { + tf->nsect = 1; /* 1 sector, lba=0 */ + + if (qc->dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + tf->lbal = 0x1; /* sect */ + tf->lbam = 0x0; /* cyl low */ + tf->lbah = 0x0; /* cyl high */ + } + + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ + } else { + tf->nsect = 0; /* time period value (0 implies now) */ + tf->command = ATA_CMD_STANDBY; + /* Consider: ATA STANDBY IMMEDIATE command */ + } + /* + * Standby and Idle condition timers could be implemented but that + * would require libata to implement the Power condition mode page + * and allow the user to change it. Changing mode pages requires + * MODE SELECT to be implemented. + */ + + return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; +} + + +/** + * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate (ignored) + * + * Sets up an ATA taskfile to issue FLUSH CACHE or + * FLUSH CACHE EXT. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + + tf->flags |= ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + + if ((qc->dev->flags & ATA_DFLAG_LBA48) && + (ata_id_has_flush_ext(qc->dev->id))) + tf->command = ATA_CMD_FLUSH_EXT; + else + tf->command = ATA_CMD_FLUSH; + + return 0; +} + +/** + * scsi_6_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 6-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_6_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("six-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 8; + lba |= ((u64)scsicmd[3]); + + len |= ((u32)scsicmd[4]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_10_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 10-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_10_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("ten-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 24; + lba |= ((u64)scsicmd[3]) << 16; + lba |= ((u64)scsicmd[4]) << 8; + lba |= ((u64)scsicmd[5]); + + len |= ((u32)scsicmd[7]) << 8; + len |= ((u32)scsicmd[8]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_16_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 16-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_16_lba_len(const u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("sixteen-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 56; + lba |= ((u64)scsicmd[3]) << 48; + lba |= ((u64)scsicmd[4]) << 40; + lba |= ((u64)scsicmd[5]) << 32; + lba |= ((u64)scsicmd[6]) << 24; + lba |= ((u64)scsicmd[7]) << 16; + lba |= ((u64)scsicmd[8]) << 8; + lba |= ((u64)scsicmd[9]); + + len |= ((u32)scsicmd[10]) << 24; + len |= ((u32)scsicmd[11]) << 16; + len |= ((u32)scsicmd[12]) << 8; + len |= ((u32)scsicmd[13]); + + *plba = lba; + *plen = len; +} + +/** + * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate + * + * Converts SCSI VERIFY command to an ATA READ VERIFY command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + u64 dev_sectors = qc->dev->n_sectors; + u64 block; + u32 n_block; + + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + tf->protocol = ATA_PROT_NODATA; + + if (scsicmd[0] == VERIFY) + scsi_10_lba_len(scsicmd, &block, &n_block); + else if (scsicmd[0] == VERIFY_16) + scsi_16_lba_len(scsicmd, &block, &n_block); + else + goto invalid_fld; + + if (!n_block) + goto nothing_to_do; + if (block >= dev_sectors) + goto out_of_range; + if ((block + n_block) > dev_sectors) + goto out_of_range; + + if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->command = ATA_CMD_VERIFY; + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) + goto out_of_range; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + tf->command = ATA_CMD_VERIFY_EXT; + + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else + /* request too large even for LBA48 */ + goto out_of_range; + + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + if (!lba_28_ok(block, n_block)) + goto out_of_range; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + goto out_of_range; + + tf->command = ATA_CMD_VERIFY; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } + + return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; +} + +/** + * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one + * @qc: Storage for translated ATA taskfile + * @scsicmd: SCSI command to translate + * + * Converts any of six SCSI read/write commands into the + * ATA counterpart, including starting sector (LBA), + * sector count, and taking into account the device's LBA48 + * support. + * + * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and + * %WRITE_16 are currently supported. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + u64 block; + u32 n_block; + + qc->flags |= ATA_QCFLAG_IO; + tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + + if (scsicmd[0] == WRITE_10 || scsicmd[0] == WRITE_6 || + scsicmd[0] == WRITE_16) + tf->flags |= ATA_TFLAG_WRITE; + + /* Calculate the SCSI LBA, transfer length and FUA. */ + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + scsi_10_lba_len(scsicmd, &block, &n_block); + if (unlikely(scsicmd[1] & (1 << 3))) + tf->flags |= ATA_TFLAG_FUA; + break; + case READ_6: + case WRITE_6: + scsi_6_lba_len(scsicmd, &block, &n_block); + + /* for 6-byte r/w commands, transfer length 0 + * means 256 blocks of data, not 0 block. + */ + if (!n_block) + n_block = 256; + break; + case READ_16: + case WRITE_16: + scsi_16_lba_len(scsicmd, &block, &n_block); + if (unlikely(scsicmd[1] & (1 << 3))) + tf->flags |= ATA_TFLAG_FUA; + break; + default: + DPRINTK("no-byte command\n"); + goto invalid_fld; + } + + /* Check and compose ATA command */ + if (!n_block) + /* For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + * + * WARNING: one or two older ATA drives treat 0 as 0... + */ + goto nothing_to_do; + + if ((dev->flags & (ATA_DFLAG_PIO | ATA_DFLAG_NCQ)) == ATA_DFLAG_NCQ) { + /* yay, NCQ */ + if (!lba_48_ok(block, n_block)) + goto out_of_range; + + tf->protocol = ATA_PROT_NCQ; + tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48; + + if (tf->flags & ATA_TFLAG_WRITE) + tf->command = ATA_CMD_FPDMA_WRITE; + else + tf->command = ATA_CMD_FPDMA_READ; + + qc->nsect = n_block; + + tf->nsect = qc->tag << 3; + tf->hob_feature = (n_block >> 8) & 0xff; + tf->feature = n_block & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device = 1 << 6; + if (tf->flags & ATA_TFLAG_FUA) + tf->device |= 1 << 7; + } else if (dev->flags & ATA_DFLAG_LBA) { + tf->flags |= ATA_TFLAG_LBA; + + if (lba_28_ok(block, n_block)) { + /* use LBA28 */ + tf->device |= (block >> 24) & 0xf; + } else if (lba_48_ok(block, n_block)) { + if (!(dev->flags & ATA_DFLAG_LBA48)) + goto out_of_range; + + /* use LBA48 */ + tf->flags |= ATA_TFLAG_LBA48; + + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else + /* request too large even for LBA48 */ + goto out_of_range; + + if (unlikely(ata_rwcmd_protocol(qc) < 0)) + goto invalid_fld; + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* The request -may- be too large for CHS addressing. */ + if (!lba_28_ok(block, n_block)) + goto out_of_range; + + if (unlikely(ata_rwcmd_protocol(qc) < 0)) + goto invalid_fld; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + goto out_of_range; + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } + + return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; +} + +static void ata_scsi_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + u8 *cdb = cmd->cmnd; + int need_sense = (qc->err_mask != 0); + + /* We snoop the SET_FEATURES - Write Cache ON/OFF command, and + * schedule EH_REVALIDATE operation to update the IDENTIFY DEVICE + * cache + */ + if (!need_sense && (qc->tf.command == ATA_CMD_SET_FEATURES) && + ((qc->tf.feature == SETFEATURES_WC_ON) || + (qc->tf.feature == SETFEATURES_WC_OFF))) { + qc->ap->eh_info.action |= ATA_EH_REVALIDATE; + ata_port_schedule_eh(qc->ap); + } + + /* For ATA pass thru (SAT) commands, generate a sense block if + * user mandated it or if there's an error. Note that if we + * generate because the user forced us to, a check condition + * is generated and the ATA register values are returned + * whether the command completed successfully or not. If there + * was no error, SK, ASC and ASCQ will all be zero. + */ + if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) && + ((cdb[2] & 0x20) || need_sense)) { + ata_gen_ata_desc_sense(qc); + } else { + if (!need_sense) { + cmd->result = SAM_STAT_GOOD; + } else { + /* TODO: decide which descriptor format to use + * for 48b LBA devices and call that here + * instead of the fixed desc, which is only + * good for smaller LBA (and maybe CHS?) + * devices. + */ + ata_gen_fixed_sense(qc); + } + } + + if (need_sense && !qc->ap->ops->error_handler) + ata_dump_status(qc->ap->id, &qc->result_tf); + + qc->scsidone(cmd); + + ata_qc_free(qc); +} + +/** + * ata_scmd_need_defer - Check whether we need to defer scmd + * @dev: ATA device to which the command is addressed + * @is_io: Is the command IO (and thus possibly NCQ)? + * + * NCQ and non-NCQ commands cannot run together. As upper layer + * only knows the queue depth, we are responsible for maintaining + * exclusion. This function checks whether a new command can be + * issued to @dev. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 1 if deferring is needed, 0 otherwise. + */ +static int ata_scmd_need_defer(struct ata_device *dev, int is_io) +{ + struct ata_port *ap = dev->ap; + + if (!(dev->flags & ATA_DFLAG_NCQ)) + return 0; + + if (is_io) { + if (!ata_tag_valid(ap->active_tag)) + return 0; + } else { + if (!ata_tag_valid(ap->active_tag) && !ap->sactive) + return 0; + } + return 1; +} + +/** + * ata_scsi_translate - Translate then issue SCSI command to ATA device + * @dev: ATA device to which the command is addressed + * @cmd: SCSI command to execute + * @done: SCSI command completion function + * @xlat_func: Actor which translates @cmd to an ATA taskfile + * + * Our ->queuecommand() function has decided that the SCSI + * command issued can be directly translated into an ATA + * command, rather than handled internally. + * + * This function sets up an ata_queued_cmd structure for the + * SCSI command, and sends that ata_queued_cmd to the hardware. + * + * The xlat_func argument (actor) returns 0 if ready to execute + * ATA command, else 1 to finish translation. If 1 is returned + * then cmd->result (and possibly cmd->sense_buffer) are assumed + * to be set reflecting an error condition or clean (early) + * termination. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 0 on success, SCSI_ML_QUEUE_DEVICE_BUSY if the command + * needs to be deferred. + */ +static int ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + ata_xlat_func_t xlat_func) +{ + struct ata_queued_cmd *qc; + u8 *scsicmd = cmd->cmnd; + int is_io = xlat_func == ata_scsi_rw_xlat; + + VPRINTK("ENTER\n"); + + if (unlikely(ata_scmd_need_defer(dev, is_io))) + goto defer; + + qc = ata_scsi_qc_new(dev, cmd, done); + if (!qc) + goto err_mem; + + /* data is present; dma-map it */ + if (cmd->sc_data_direction == DMA_FROM_DEVICE || + cmd->sc_data_direction == DMA_TO_DEVICE) { + if (unlikely(cmd->request_bufflen < 1)) { + ata_dev_printk(dev, KERN_WARNING, + "WARNING: zero len r/w req\n"); + goto err_did; + } + + if (cmd->use_sg) + ata_sg_init(qc, cmd->request_buffer, cmd->use_sg); + else + ata_sg_init_one(qc, cmd->request_buffer, + cmd->request_bufflen); + + qc->dma_dir = cmd->sc_data_direction; + } + + qc->complete_fn = ata_scsi_qc_complete; + + if (xlat_func(qc, scsicmd)) + goto early_finish; + + /* select device, send command to hardware */ + ata_qc_issue(qc); + + VPRINTK("EXIT\n"); + return 0; + +early_finish: + ata_qc_free(qc); + done(cmd); + DPRINTK("EXIT - early finish (good or error)\n"); + return 0; + +err_did: + ata_qc_free(qc); +err_mem: + cmd->result = (DID_ERROR << 16); + done(cmd); + DPRINTK("EXIT - internal\n"); + return 0; + +defer: + DPRINTK("EXIT - defer\n"); + return SCSI_MLQUEUE_DEVICE_BUSY; +} + +/** + * ata_scsi_rbuf_get - Map response buffer. + * @cmd: SCSI command containing buffer to be mapped. + * @buf_out: Pointer to mapped area. + * + * Maps buffer contained within SCSI command @cmd. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Length of response buffer. + */ + +static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out) +{ + u8 *buf; + unsigned int buflen; + + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *) cmd->request_buffer; + buf = kmap_atomic(sg->page, KM_USER0) + sg->offset; + buflen = sg->length; + } else { + buf = cmd->request_buffer; + buflen = cmd->request_bufflen; + } + + *buf_out = buf; + return buflen; +} + +/** + * ata_scsi_rbuf_put - Unmap response buffer. + * @cmd: SCSI command containing buffer to be unmapped. + * @buf: buffer to unmap + * + * Unmaps response buffer contained within @cmd. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) +{ + if (cmd->use_sg) { + struct scatterlist *sg; + + sg = (struct scatterlist *) cmd->request_buffer; + kunmap_atomic(buf - sg->offset, KM_USER0); + } +} + +/** + * ata_scsi_rbuf_fill - wrapper for SCSI command simulators + * @args: device IDENTIFY data / SCSI command of interest. + * @actor: Callback hook for desired SCSI command simulator + * + * Takes care of the hard work of simulating a SCSI command... + * Mapping the response buffer, calling the command's handler, + * and handling the handler's return value. This return value + * indicates whether the handler wishes the SCSI command to be + * completed successfully (0), or not (in which case cmd->result + * and sense buffer are assumed to be set). + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_scsi_rbuf_fill(struct ata_scsi_args *args, + unsigned int (*actor) (struct ata_scsi_args *args, + u8 *rbuf, unsigned int buflen)) +{ + u8 *rbuf; + unsigned int buflen, rc; + struct scsi_cmnd *cmd = args->cmd; + + buflen = ata_scsi_rbuf_get(cmd, &rbuf); + memset(rbuf, 0, buflen); + rc = actor(args, rbuf, buflen); + ata_scsi_rbuf_put(cmd, rbuf); + + if (rc == 0) + cmd->result = SAM_STAT_GOOD; + args->done(cmd); +} + +/** + * ata_scsiop_inq_std - Simulate INQUIRY command + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Returns standard device identification data associated + * with non-VPD INQUIRY command output. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + u8 hdr[] = { + TYPE_DISK, + 0, + 0x5, /* claim SPC-3 version compatibility */ + 2, + 95 - 4 + }; + + /* set scsi removeable (RMB) bit per ata bit */ + if (ata_id_removeable(args->id)) + hdr[1] |= (1 << 7); + + VPRINTK("ENTER\n"); + + memcpy(rbuf, hdr, sizeof(hdr)); + + if (buflen > 35) { + memcpy(&rbuf[8], "ATA ", 8); + ata_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16); + ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4); + if (rbuf[32] == 0 || rbuf[32] == ' ') + memcpy(&rbuf[32], "n/a ", 4); + } + + if (buflen > 63) { + const u8 versions[] = { + 0x60, /* SAM-3 (no version claimed) */ + + 0x03, + 0x20, /* SBC-2 (no version claimed) */ + + 0x02, + 0x60 /* SPC-3 (no version claimed) */ + }; + + memcpy(rbuf + 59, versions, sizeof(versions)); + } + + return 0; +} + +/** + * ata_scsiop_inq_00 - Simulate INQUIRY VPD page 0, list of pages + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Returns list of inquiry VPD pages available. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + const u8 pages[] = { + 0x00, /* page 0x00, this page */ + 0x80, /* page 0x80, unit serial no page */ + 0x83 /* page 0x83, device ident page */ + }; + rbuf[3] = sizeof(pages); /* number of supported VPD pages */ + + if (buflen > 6) + memcpy(rbuf + 4, pages, sizeof(pages)); + + return 0; +} + +/** + * ata_scsiop_inq_80 - Simulate INQUIRY VPD page 80, device serial number + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Returns ATA device serial number. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + const u8 hdr[] = { + 0, + 0x80, /* this page code */ + 0, + ATA_SERNO_LEN, /* page len */ + }; + memcpy(rbuf, hdr, sizeof(hdr)); + + if (buflen > (ATA_SERNO_LEN + 4 - 1)) + ata_id_string(args->id, (unsigned char *) &rbuf[4], + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + + return 0; +} + +/** + * ata_scsiop_inq_83 - Simulate INQUIRY VPD page 83, device identity + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Yields two logical unit device identification designators: + * - vendor specific ASCII containing the ATA serial number + * - SAT defined "t10 vendor id based" containing ASCII vendor + * name ("ATA "), model and serial numbers. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + int num; + const int sat_model_serial_desc_len = 68; + const int ata_model_byte_len = 40; + + rbuf[1] = 0x83; /* this page code */ + num = 4; + + if (buflen > (ATA_SERNO_LEN + num + 3)) { + /* piv=0, assoc=lu, code_set=ACSII, designator=vendor */ + rbuf[num + 0] = 2; + rbuf[num + 3] = ATA_SERNO_LEN; + num += 4; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + num += ATA_SERNO_LEN; + } + if (buflen > (sat_model_serial_desc_len + num + 3)) { + /* SAT defined lu model and serial numbers descriptor */ + /* piv=0, assoc=lu, code_set=ACSII, designator=t10 vendor id */ + rbuf[num + 0] = 2; + rbuf[num + 1] = 1; + rbuf[num + 3] = sat_model_serial_desc_len; + num += 4; + memcpy(rbuf + num, "ATA ", 8); + num += 8; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_PROD_OFS, ata_model_byte_len); + num += ata_model_byte_len; + ata_id_string(args->id, (unsigned char *) rbuf + num, + ATA_ID_SERNO_OFS, ATA_SERNO_LEN); + num += ATA_SERNO_LEN; + } + rbuf[3] = num - 4; /* page len (assume less than 256 bytes) */ + return 0; +} + +/** + * ata_scsiop_noop - Command handler that simply returns success. + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * No operation. Simply returns success to caller, to indicate + * that the caller should successfully complete this SCSI command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + VPRINTK("ENTER\n"); + return 0; +} + +/** + * ata_msense_push - Push data onto MODE SENSE data output buffer + * @ptr_io: (input/output) Location to store more output data + * @last: End of output data buffer + * @buf: Pointer to BLOB being added to output buffer + * @buflen: Length of BLOB + * + * Store MODE SENSE data on an output buffer. + * + * LOCKING: + * None. + */ + +static void ata_msense_push(u8 **ptr_io, const u8 *last, + const u8 *buf, unsigned int buflen) +{ + u8 *ptr = *ptr_io; + + if ((ptr + buflen - 1) > last) + return; + + memcpy(ptr, buf, buflen); + + ptr += buflen; + + *ptr_io = ptr; +} + +/** + * ata_msense_caching - Simulate MODE SENSE caching info page + * @id: device IDENTIFY data + * @ptr_io: (input/output) Location to store more output data + * @last: End of output data buffer + * + * Generate a caching info page, which conditionally indicates + * write caching to the SCSI layer, depending on device + * capabilities. + * + * LOCKING: + * None. + */ + +static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io, + const u8 *last) +{ + u8 page[CACHE_MPAGE_LEN]; + + memcpy(page, def_cache_mpage, sizeof(page)); + if (ata_id_wcache_enabled(id)) + page[2] |= (1 << 2); /* write cache enable */ + if (!ata_id_rahead_enabled(id)) + page[12] |= (1 << 5); /* disable read ahead */ + + ata_msense_push(ptr_io, last, page, sizeof(page)); + return sizeof(page); +} + +/** + * ata_msense_ctl_mode - Simulate MODE SENSE control mode page + * @dev: Device associated with this MODE SENSE command + * @ptr_io: (input/output) Location to store more output data + * @last: End of output data buffer + * + * Generate a generic MODE SENSE control mode page. + * + * LOCKING: + * None. + */ + +static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last) +{ + ata_msense_push(ptr_io, last, def_control_mpage, + sizeof(def_control_mpage)); + return sizeof(def_control_mpage); +} + +/** + * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page + * @dev: Device associated with this MODE SENSE command + * @ptr_io: (input/output) Location to store more output data + * @last: End of output data buffer + * + * Generate a generic MODE SENSE r/w error recovery page. + * + * LOCKING: + * None. + */ + +static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last) +{ + + ata_msense_push(ptr_io, last, def_rw_recovery_mpage, + sizeof(def_rw_recovery_mpage)); + return sizeof(def_rw_recovery_mpage); +} + +/* + * We can turn this into a real blacklist if it's needed, for now just + * blacklist any Maxtor BANC1G10 revision firmware + */ +static int ata_dev_supports_fua(u16 *id) +{ + unsigned char model[41], fw[9]; + + if (!libata_fua) + return 0; + if (!ata_id_has_fua(id)) + return 0; + + ata_id_c_string(id, model, ATA_ID_PROD_OFS, sizeof(model)); + ata_id_c_string(id, fw, ATA_ID_FW_REV_OFS, sizeof(fw)); + + if (strcmp(model, "Maxtor")) + return 1; + if (strcmp(fw, "BANC1G10")) + return 1; + + return 0; /* blacklisted */ +} + +/** + * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Simulate MODE SENSE commands. Assume this is invoked for direct + * access devices (e.g. disks) only. There should be no block + * descriptor for other device types. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + struct ata_device *dev = args->dev; + u8 *scsicmd = args->cmd->cmnd, *p, *last; + const u8 sat_blk_desc[] = { + 0, 0, 0, 0, /* number of blocks: sat unspecified */ + 0, + 0, 0x2, 0x0 /* block length: 512 bytes */ + }; + u8 pg, spg; + unsigned int ebd, page_control, six_byte, output_len, alloc_len, minlen; + u8 dpofua; + + VPRINTK("ENTER\n"); + + six_byte = (scsicmd[0] == MODE_SENSE); + ebd = !(scsicmd[1] & 0x8); /* dbd bit inverted == edb */ + /* + * LLBA bit in msense(10) ignored (compliant) + */ + + page_control = scsicmd[2] >> 6; + switch (page_control) { + case 0: /* current */ + break; /* supported */ + case 3: /* saved */ + goto saving_not_supp; + case 1: /* changeable */ + case 2: /* defaults */ + default: + goto invalid_fld; + } + + if (six_byte) { + output_len = 4 + (ebd ? 8 : 0); + alloc_len = scsicmd[4]; + } else { + output_len = 8 + (ebd ? 8 : 0); + alloc_len = (scsicmd[7] << 8) + scsicmd[8]; + } + minlen = (alloc_len < buflen) ? alloc_len : buflen; + + p = rbuf + output_len; + last = rbuf + minlen - 1; + + pg = scsicmd[2] & 0x3f; + spg = scsicmd[3]; + /* + * No mode subpages supported (yet) but asking for _all_ + * subpages may be valid + */ + if (spg && (spg != ALL_SUB_MPAGES)) + goto invalid_fld; + + switch(pg) { + case RW_RECOVERY_MPAGE: + output_len += ata_msense_rw_recovery(&p, last); + break; + + case CACHE_MPAGE: + output_len += ata_msense_caching(args->id, &p, last); + break; + + case CONTROL_MPAGE: { + output_len += ata_msense_ctl_mode(&p, last); + break; + } + + case ALL_MPAGES: + output_len += ata_msense_rw_recovery(&p, last); + output_len += ata_msense_caching(args->id, &p, last); + output_len += ata_msense_ctl_mode(&p, last); + break; + + default: /* invalid page code */ + goto invalid_fld; + } + + if (minlen < 1) + return 0; + + dpofua = 0; + if (ata_dev_supports_fua(args->id) && (dev->flags & ATA_DFLAG_LBA48) && + (!(dev->flags & ATA_DFLAG_PIO) || dev->multi_count)) + dpofua = 1 << 4; + + if (six_byte) { + output_len--; + rbuf[0] = output_len; + if (minlen > 2) + rbuf[2] |= dpofua; + if (ebd) { + if (minlen > 3) + rbuf[3] = sizeof(sat_blk_desc); + if (minlen > 11) + memcpy(rbuf + 4, sat_blk_desc, + sizeof(sat_blk_desc)); + } + } else { + output_len -= 2; + rbuf[0] = output_len >> 8; + if (minlen > 1) + rbuf[1] = output_len; + if (minlen > 3) + rbuf[3] |= dpofua; + if (ebd) { + if (minlen > 7) + rbuf[7] = sizeof(sat_blk_desc); + if (minlen > 15) + memcpy(rbuf + 8, sat_blk_desc, + sizeof(sat_blk_desc)); + } + } + return 0; + +invalid_fld: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +saving_not_supp: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); + /* "Saving parameters not supported" */ + return 1; +} + +/** + * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Simulate READ CAPACITY commands. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + u64 n_sectors; + u32 tmp; + + VPRINTK("ENTER\n"); + + if (ata_id_has_lba(args->id)) { + if (ata_id_has_lba48(args->id)) + n_sectors = ata_id_u64(args->id, 100); + else + n_sectors = ata_id_u32(args->id, 60); + } else { + /* CHS default translation */ + n_sectors = args->id[1] * args->id[3] * args->id[6]; + + if (ata_id_current_chs_valid(args->id)) + /* CHS current translation */ + n_sectors = ata_id_u32(args->id, 57); + } + + n_sectors--; /* ATA TotalUserSectors - 1 */ + + if (args->cmd->cmnd[0] == READ_CAPACITY) { + if( n_sectors >= 0xffffffffULL ) + tmp = 0xffffffff ; /* Return max count on overflow */ + else + tmp = n_sectors ; + + /* sector count, 32-bit */ + rbuf[0] = tmp >> (8 * 3); + rbuf[1] = tmp >> (8 * 2); + rbuf[2] = tmp >> (8 * 1); + rbuf[3] = tmp; + + /* sector size */ + tmp = ATA_SECT_SIZE; + rbuf[6] = tmp >> 8; + rbuf[7] = tmp; + + } else { + /* sector count, 64-bit */ + tmp = n_sectors >> (8 * 4); + rbuf[2] = tmp >> (8 * 3); + rbuf[3] = tmp >> (8 * 2); + rbuf[4] = tmp >> (8 * 1); + rbuf[5] = tmp; + tmp = n_sectors; + rbuf[6] = tmp >> (8 * 3); + rbuf[7] = tmp >> (8 * 2); + rbuf[8] = tmp >> (8 * 1); + rbuf[9] = tmp; + + /* sector size */ + tmp = ATA_SECT_SIZE; + rbuf[12] = tmp >> 8; + rbuf[13] = tmp; + } + + return 0; +} + +/** + * ata_scsiop_report_luns - Simulate REPORT LUNS command + * @args: device IDENTIFY data / SCSI command of interest. + * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. + * @buflen: Response buffer length. + * + * Simulate REPORT LUNS command. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, + unsigned int buflen) +{ + VPRINTK("ENTER\n"); + rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */ + + return 0; +} + +/** + * ata_scsi_set_sense - Set SCSI sense data and status + * @cmd: SCSI request to be handled + * @sk: SCSI-defined sense key + * @asc: SCSI-defined additional sense code + * @ascq: SCSI-defined additional sense code qualifier + * + * Helper function that builds a valid fixed format, current + * response code and the given sense key (sk), additional sense + * code (asc) and additional sense code qualifier (ascq) with + * a SCSI command status of %SAM_STAT_CHECK_CONDITION and + * DRIVER_SENSE set in the upper bits of scsi_cmnd::result . + * + * LOCKING: + * Not required + */ + +void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +{ + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + cmd->sense_buffer[0] = 0x70; /* fixed format, current */ + cmd->sense_buffer[2] = sk; + cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ + cmd->sense_buffer[12] = asc; + cmd->sense_buffer[13] = ascq; +} + +/** + * ata_scsi_badcmd - End a SCSI request with an error + * @cmd: SCSI request to be handled + * @done: SCSI command completion function + * @asc: SCSI-defined additional sense code + * @ascq: SCSI-defined additional sense code qualifier + * + * Helper function that completes a SCSI command with + * %SAM_STAT_CHECK_CONDITION, with a sense key %ILLEGAL_REQUEST + * and the specified additional sense codes. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) +{ + DPRINTK("ENTER\n"); + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq); + + done(cmd); +} + +static void atapi_sense_complete(struct ata_queued_cmd *qc) +{ + if (qc->err_mask && ((qc->err_mask & AC_ERR_DEV) == 0)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); + } + + qc->scsidone(qc->scsicmd); + ata_qc_free(qc); +} + +/* is it pointless to prefer PIO for "safety reasons"? */ +static inline int ata_pio_use_silly(struct ata_port *ap) +{ + return (ap->flags & ATA_FLAG_PIO_DMA); +} + +static void atapi_request_sense(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct scsi_cmnd *cmd = qc->scsicmd; + + DPRINTK("ATAPI request sense\n"); + + /* FIXME: is this needed? */ + memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + + ap->ops->tf_read(ap, &qc->tf); + + /* fill these in, for the case where they are -not- overwritten */ + cmd->sense_buffer[0] = 0x70; + cmd->sense_buffer[2] = qc->tf.feature >> 4; + + ata_qc_reinit(qc); + + ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + qc->dma_dir = DMA_FROM_DEVICE; + + memset(&qc->cdb, 0, qc->dev->cdb_len); + qc->cdb[0] = REQUEST_SENSE; + qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.command = ATA_CMD_PACKET; + + if (ata_pio_use_silly(ap)) { + qc->tf.protocol = ATA_PROT_ATAPI_DMA; + qc->tf.feature |= ATAPI_PKT_DMA; + } else { + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + } + qc->nbytes = SCSI_SENSE_BUFFERSIZE; + + qc->complete_fn = atapi_sense_complete; + + ata_qc_issue(qc); + + DPRINTK("EXIT\n"); +} + +static void atapi_qc_complete(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + unsigned int err_mask = qc->err_mask; + + VPRINTK("ENTER, err_mask 0x%X\n", err_mask); + + /* handle completion from new EH */ + if (unlikely(qc->ap->ops->error_handler && + (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) { + + if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into a + * sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); + } + + /* SCSI EH automatically locks door if sdev->locked is + * set. Sometimes door lock request continues to + * fail, for example, when no media is present. This + * creates a loop - SCSI EH issues door lock which + * fails and gets invoked again to acquire sense data + * for the failed command. + * + * If door lock fails, always clear sdev->locked to + * avoid this infinite loop. + */ + if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL) + qc->dev->sdev->locked = 0; + + qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; + qc->scsidone(cmd); + ata_qc_free(qc); + return; + } + + /* successful completion or old EH failure path */ + if (unlikely(err_mask & AC_ERR_DEV)) { + cmd->result = SAM_STAT_CHECK_CONDITION; + atapi_request_sense(qc); + return; + } else if (unlikely(err_mask)) { + /* FIXME: not quite right; we don't want the + * translation of taskfile registers into + * a sense descriptors, since that's only + * correct for ATA, not ATAPI + */ + ata_gen_ata_desc_sense(qc); + } else { + u8 *scsicmd = cmd->cmnd; + + if ((scsicmd[0] == INQUIRY) && ((scsicmd[1] & 0x03) == 0)) { + u8 *buf = NULL; + unsigned int buflen; + + buflen = ata_scsi_rbuf_get(cmd, &buf); + + /* ATAPI devices typically report zero for their SCSI version, + * and sometimes deviate from the spec WRT response data + * format. If SCSI version is reported as zero like normal, + * then we make the following fixups: 1) Fake MMC-5 version, + * to indicate to the Linux scsi midlayer this is a modern + * device. 2) Ensure response data format / ATAPI information + * are always correct. + */ + if (buf[2] == 0) { + buf[2] = 0x5; + buf[3] = 0x32; + } + + ata_scsi_rbuf_put(cmd, buf); + } + + cmd->result = SAM_STAT_GOOD; + } + + qc->scsidone(cmd); + ata_qc_free(qc); +} +/** + * atapi_xlat - Initialize PACKET taskfile + * @qc: command structure to be initialized + * @scsicmd: SCSI CDB associated with this PACKET command + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Zero on success, non-zero on failure. + */ + +static unsigned int atapi_xlat(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_device *dev = qc->dev; + int using_pio = (dev->flags & ATA_DFLAG_PIO); + int nodata = (cmd->sc_data_direction == DMA_NONE); + + if (!using_pio) + /* Check whether ATAPI DMA is safe */ + if (ata_check_atapi_dma(qc)) + using_pio = 1; + + memcpy(&qc->cdb, scsicmd, dev->cdb_len); + + qc->complete_fn = atapi_qc_complete; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + if (cmd->sc_data_direction == DMA_TO_DEVICE) { + qc->tf.flags |= ATA_TFLAG_WRITE; + DPRINTK("direction: write\n"); + } + + qc->tf.command = ATA_CMD_PACKET; + + /* no data, or PIO data xfer */ + if (using_pio || nodata) { + if (nodata) + qc->tf.protocol = ATA_PROT_ATAPI_NODATA; + else + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + } + + /* DMA data xfer */ + else { + qc->tf.protocol = ATA_PROT_ATAPI_DMA; + qc->tf.feature |= ATAPI_PKT_DMA; + + if (atapi_dmadir && (cmd->sc_data_direction != DMA_TO_DEVICE)) + /* some SATA bridges need us to indicate data xfer direction */ + qc->tf.feature |= ATAPI_DMADIR; + } + + qc->nbytes = cmd->request_bufflen; + + return 0; +} + +static struct ata_device * ata_find_dev(struct ata_port *ap, int id) +{ + if (likely(id < ATA_MAX_DEVICES)) + return &ap->device[id]; + return NULL; +} + +static struct ata_device * __ata_scsi_find_dev(struct ata_port *ap, + const struct scsi_device *scsidev) +{ + /* skip commands not addressed to targets we simulate */ + if (unlikely(scsidev->channel || scsidev->lun)) + return NULL; + + return ata_find_dev(ap, scsidev->id); +} + +/** + * ata_scsi_dev_enabled - determine if device is enabled + * @dev: ATA device + * + * Determine if commands should be sent to the specified device. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 0 if commands are not allowed / 1 if commands are allowed + */ + +static int ata_scsi_dev_enabled(struct ata_device *dev) +{ + if (unlikely(!ata_dev_enabled(dev))) + return 0; + + if (!atapi_enabled || (dev->ap->flags & ATA_FLAG_NO_ATAPI)) { + if (unlikely(dev->class == ATA_DEV_ATAPI)) { + ata_dev_printk(dev, KERN_WARNING, + "WARNING: ATAPI is %s, device ignored.\n", + atapi_enabled ? "not supported with this driver" : "disabled"); + return 0; + } + } + + return 1; +} + +/** + * ata_scsi_find_dev - lookup ata_device from scsi_cmnd + * @ap: ATA port to which the device is attached + * @scsidev: SCSI device from which we derive the ATA device + * + * Given various information provided in struct scsi_cmnd, + * map that onto an ATA bus, and using that mapping + * determine which ata_device is associated with the + * SCSI command to be sent. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * Associated ATA device, or %NULL if not found. + */ +static struct ata_device * +ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev) +{ + struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev); + + if (unlikely(!dev || !ata_scsi_dev_enabled(dev))) + return NULL; + + return dev; +} + +/* + * ata_scsi_map_proto - Map pass-thru protocol value to taskfile value. + * @byte1: Byte 1 from pass-thru CDB. + * + * RETURNS: + * ATA_PROT_UNKNOWN if mapping failed/unimplemented, protocol otherwise. + */ +static u8 +ata_scsi_map_proto(u8 byte1) +{ + switch((byte1 & 0x1e) >> 1) { + case 3: /* Non-data */ + return ATA_PROT_NODATA; + + case 6: /* DMA */ + return ATA_PROT_DMA; + + case 4: /* PIO Data-in */ + case 5: /* PIO Data-out */ + return ATA_PROT_PIO; + + case 10: /* Device Reset */ + case 0: /* Hard Reset */ + case 1: /* SRST */ + case 2: /* Bus Idle */ + case 7: /* Packet */ + case 8: /* DMA Queued */ + case 9: /* Device Diagnostic */ + case 11: /* UDMA Data-in */ + case 12: /* UDMA Data-Out */ + case 13: /* FPDMA */ + default: /* Reserved */ + break; + } + + return ATA_PROT_UNKNOWN; +} + +/** + * ata_scsi_pass_thru - convert ATA pass-thru CDB to taskfile + * @qc: command structure to be initialized + * @scsicmd: SCSI command to convert + * + * Handles either 12 or 16-byte versions of the CDB. + * + * RETURNS: + * Zero on success, non-zero on failure. + */ +static unsigned int +ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd) +{ + struct ata_taskfile *tf = &(qc->tf); + struct scsi_cmnd *cmd = qc->scsicmd; + struct ata_device *dev = qc->dev; + + if ((tf->protocol = ata_scsi_map_proto(scsicmd[1])) == ATA_PROT_UNKNOWN) + goto invalid_fld; + + /* We may not issue DMA commands if no DMA mode is set */ + if (tf->protocol == ATA_PROT_DMA && dev->dma_mode == 0) + goto invalid_fld; + + if (scsicmd[1] & 0xe0) + /* PIO multi not supported yet */ + goto invalid_fld; + + /* + * 12 and 16 byte CDBs use different offsets to + * provide the various register values. + */ + if (scsicmd[0] == ATA_16) { + /* + * 16-byte CDB - may contain extended commands. + * + * If that is the case, copy the upper byte register values. + */ + if (scsicmd[1] & 0x01) { + tf->hob_feature = scsicmd[3]; + tf->hob_nsect = scsicmd[5]; + tf->hob_lbal = scsicmd[7]; + tf->hob_lbam = scsicmd[9]; + tf->hob_lbah = scsicmd[11]; + tf->flags |= ATA_TFLAG_LBA48; + } else + tf->flags &= ~ATA_TFLAG_LBA48; + + /* + * Always copy low byte, device and command registers. + */ + tf->feature = scsicmd[4]; + tf->nsect = scsicmd[6]; + tf->lbal = scsicmd[8]; + tf->lbam = scsicmd[10]; + tf->lbah = scsicmd[12]; + tf->device = scsicmd[13]; + tf->command = scsicmd[14]; + } else { + /* + * 12-byte CDB - incapable of extended commands. + */ + tf->flags &= ~ATA_TFLAG_LBA48; + + tf->feature = scsicmd[3]; + tf->nsect = scsicmd[4]; + tf->lbal = scsicmd[5]; + tf->lbam = scsicmd[6]; + tf->lbah = scsicmd[7]; + tf->device = scsicmd[8]; + tf->command = scsicmd[9]; + } + /* + * If slave is possible, enforce correct master/slave bit + */ + if (qc->ap->flags & ATA_FLAG_SLAVE_POSS) + tf->device = qc->dev->devno ? + tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1; + + /* + * Filter SET_FEATURES - XFER MODE command -- otherwise, + * SET_FEATURES - XFER MODE must be preceded/succeeded + * by an update to hardware-specific registers for each + * controller (i.e. the reason for ->set_piomode(), + * ->set_dmamode(), and ->post_set_mode() hooks). + */ + if ((tf->command == ATA_CMD_SET_FEATURES) + && (tf->feature == SETFEATURES_XFER)) + goto invalid_fld; + + /* + * Set flags so that all registers will be written, + * and pass on write indication (used for PIO/DMA + * setup.) + */ + tf->flags |= (ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE); + + if (cmd->sc_data_direction == DMA_TO_DEVICE) + tf->flags |= ATA_TFLAG_WRITE; + + /* + * Set transfer length. + * + * TODO: find out if we need to do more here to + * cover scatter/gather case. + */ + qc->nsect = cmd->request_bufflen / ATA_SECT_SIZE; + + /* request result TF */ + qc->flags |= ATA_QCFLAG_RESULT_TF; + + return 0; + + invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x00); + /* "Invalid field in cdb" */ + return 1; +} + +/** + * ata_get_xlat_func - check if SCSI to ATA translation is possible + * @dev: ATA device + * @cmd: SCSI command opcode to consider + * + * Look up the SCSI command given, and determine whether the + * SCSI command is to be translated or simulated. + * + * RETURNS: + * Pointer to translation function if possible, %NULL if not. + */ + +static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) +{ + switch (cmd) { + case READ_6: + case READ_10: + case READ_16: + + case WRITE_6: + case WRITE_10: + case WRITE_16: + return ata_scsi_rw_xlat; + + case SYNCHRONIZE_CACHE: + if (ata_try_flush_cache(dev)) + return ata_scsi_flush_xlat; + break; + + case VERIFY: + case VERIFY_16: + return ata_scsi_verify_xlat; + + case ATA_12: + case ATA_16: + return ata_scsi_pass_thru; + + case START_STOP: + return ata_scsi_start_stop_xlat; + } + + return NULL; +} + +/** + * ata_scsi_dump_cdb - dump SCSI command contents to dmesg + * @ap: ATA port to which the command was being sent + * @cmd: SCSI command to dump + * + * Prints the contents of a SCSI command via printk(). + */ + +static inline void ata_scsi_dump_cdb(struct ata_port *ap, + struct scsi_cmnd *cmd) +{ +#ifdef ATA_DEBUG + struct scsi_device *scsidev = cmd->device; + u8 *scsicmd = cmd->cmnd; + + DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", + ap->id, + scsidev->channel, scsidev->id, scsidev->lun, + scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3], + scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7], + scsicmd[8]); +#endif +} + +static inline int __ata_scsi_queuecmd(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *), + struct ata_device *dev) +{ + int rc = 0; + + if (dev->class == ATA_DEV_ATA) { + ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, + cmd->cmnd[0]); + + if (xlat_func) + rc = ata_scsi_translate(dev, cmd, done, xlat_func); + else + ata_scsi_simulate(dev, cmd, done); + } else + rc = ata_scsi_translate(dev, cmd, done, atapi_xlat); + + return rc; +} + +/** + * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device + * @cmd: SCSI command to be sent + * @done: Completion function, called when command is complete + * + * In some cases, this function translates SCSI commands into + * ATA taskfiles, and queues the taskfiles to be sent to + * hardware. In other cases, this function simulates a + * SCSI device by evaluating and responding to certain + * SCSI commands. This creates the overall effect of + * ATA and ATAPI devices appearing as SCSI devices. + * + * LOCKING: + * Releases scsi-layer-held lock, and obtains host_set lock. + * + * RETURNS: + * Return value from __ata_scsi_queuecmd() if @cmd can be queued, + * 0 otherwise. + */ +int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) +{ + struct ata_port *ap; + struct ata_device *dev; + struct scsi_device *scsidev = cmd->device; + struct Scsi_Host *shost = scsidev->host; + int rc = 0; + + ap = ata_shost_to_port(shost); + + spin_unlock(shost->host_lock); + spin_lock(ap->lock); + + ata_scsi_dump_cdb(ap, cmd); + + dev = ata_scsi_find_dev(ap, scsidev); + if (likely(dev)) + rc = __ata_scsi_queuecmd(cmd, done, dev); + else { + cmd->result = (DID_BAD_TARGET << 16); + done(cmd); + } + + spin_unlock(ap->lock); + spin_lock(shost->host_lock); + return rc; +} + +/** + * ata_scsi_simulate - simulate SCSI command on ATA device + * @dev: the target device + * @cmd: SCSI command being sent to device. + * @done: SCSI command completion function. + * + * Interprets and directly executes a select list of SCSI commands + * that can be handled internally. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + struct ata_scsi_args args; + const u8 *scsicmd = cmd->cmnd; + + args.dev = dev; + args.id = dev->id; + args.cmd = cmd; + args.done = done; + + switch(scsicmd[0]) { + /* no-op's, complete with success */ + case SYNCHRONIZE_CACHE: + case REZERO_UNIT: + case SEEK_6: + case SEEK_10: + case TEST_UNIT_READY: + case FORMAT_UNIT: /* FIXME: correct? */ + case SEND_DIAGNOSTIC: /* FIXME: correct? */ + ata_scsi_rbuf_fill(&args, ata_scsiop_noop); + break; + + case INQUIRY: + if (scsicmd[1] & 2) /* is CmdDt set? */ + ata_scsi_invalid_field(cmd, done); + else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); + else if (scsicmd[2] == 0x00) + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); + else if (scsicmd[2] == 0x80) + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); + else if (scsicmd[2] == 0x83) + ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); + else + ata_scsi_invalid_field(cmd, done); + break; + + case MODE_SENSE: + case MODE_SENSE_10: + ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); + break; + + case MODE_SELECT: /* unconditionally return */ + case MODE_SELECT_10: /* bad-field-in-cdb */ + ata_scsi_invalid_field(cmd, done); + break; + + case READ_CAPACITY: + ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); + break; + + case SERVICE_ACTION_IN: + if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) + ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); + else + ata_scsi_invalid_field(cmd, done); + break; + + case REPORT_LUNS: + ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); + break; + + /* mandatory commands we haven't implemented yet */ + case REQUEST_SENSE: + + /* all other commands */ + default: + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); + /* "Invalid command operation code" */ + done(cmd); + break; + } +} + +void ata_scsi_scan_host(struct ata_port *ap) +{ + unsigned int i; + + if (ap->flags & ATA_FLAG_DISABLED) + return; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + struct scsi_device *sdev; + + if (!ata_dev_enabled(dev) || dev->sdev) + continue; + + sdev = __scsi_add_device(ap->host, 0, i, 0, NULL); + if (!IS_ERR(sdev)) { + dev->sdev = sdev; + scsi_device_put(sdev); + } + } +} + +/** + * ata_scsi_offline_dev - offline attached SCSI device + * @dev: ATA device to offline attached SCSI device for + * + * This function is called from ata_eh_hotplug() and responsible + * for taking the SCSI device attached to @dev offline. This + * function is called with host_set lock which protects dev->sdev + * against clearing. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + * + * RETURNS: + * 1 if attached SCSI device exists, 0 otherwise. + */ +int ata_scsi_offline_dev(struct ata_device *dev) +{ + if (dev->sdev) { + scsi_device_set_state(dev->sdev, SDEV_OFFLINE); + return 1; + } + return 0; +} + +/** + * ata_scsi_remove_dev - remove attached SCSI device + * @dev: ATA device to remove attached SCSI device for + * + * This function is called from ata_eh_scsi_hotplug() and + * responsible for removing the SCSI device attached to @dev. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +static void ata_scsi_remove_dev(struct ata_device *dev) +{ + struct ata_port *ap = dev->ap; + struct scsi_device *sdev; + unsigned long flags; + + /* Alas, we need to grab scan_mutex to ensure SCSI device + * state doesn't change underneath us and thus + * scsi_device_get() always succeeds. The mutex locking can + * be removed if there is __scsi_device_get() interface which + * increments reference counts regardless of device state. + */ + mutex_lock(&ap->host->scan_mutex); + spin_lock_irqsave(ap->lock, flags); + + /* clearing dev->sdev is protected by host_set lock */ + sdev = dev->sdev; + dev->sdev = NULL; + + if (sdev) { + /* If user initiated unplug races with us, sdev can go + * away underneath us after the host_set lock and + * scan_mutex are released. Hold onto it. + */ + if (scsi_device_get(sdev) == 0) { + /* The following ensures the attached sdev is + * offline on return from ata_scsi_offline_dev() + * regardless it wins or loses the race + * against this function. + */ + scsi_device_set_state(sdev, SDEV_OFFLINE); + } else { + WARN_ON(1); + sdev = NULL; + } + } + + spin_unlock_irqrestore(ap->lock, flags); + mutex_unlock(&ap->host->scan_mutex); + + if (sdev) { + ata_dev_printk(dev, KERN_INFO, "detaching (SCSI %s)\n", + sdev->sdev_gendev.bus_id); + + scsi_remove_device(sdev); + scsi_device_put(sdev); + } +} + +/** + * ata_scsi_hotplug - SCSI part of hotplug + * @data: Pointer to ATA port to perform SCSI hotplug on + * + * Perform SCSI part of hotplug. It's executed from a separate + * workqueue after EH completes. This is necessary because SCSI + * hot plugging requires working EH and hot unplugging is + * synchronized with hot plugging with a mutex. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_hotplug(void *data) +{ + struct ata_port *ap = data; + int i; + + if (ap->pflags & ATA_PFLAG_UNLOADING) { + DPRINTK("ENTER/EXIT - unloading\n"); + return; + } + + DPRINTK("ENTER\n"); + + /* unplug detached devices */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned long flags; + + if (!(dev->flags & ATA_DFLAG_DETACHED)) + continue; + + spin_lock_irqsave(ap->lock, flags); + dev->flags &= ~ATA_DFLAG_DETACHED; + spin_unlock_irqrestore(ap->lock, flags); + + ata_scsi_remove_dev(dev); + } + + /* scan for new ones */ + ata_scsi_scan_host(ap); + + /* If we scanned while EH was in progress, scan would have + * failed silently. Requeue if there are enabled but + * unattached devices. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + if (ata_dev_enabled(dev) && !dev->sdev) { + queue_delayed_work(ata_aux_wq, &ap->hotplug_task, HZ); + break; + } + } + + DPRINTK("EXIT\n"); +} + +/** + * ata_scsi_user_scan - indication for user-initiated bus scan + * @shost: SCSI host to scan + * @channel: Channel to scan + * @id: ID to scan + * @lun: LUN to scan + * + * This function is called when user explicitly requests bus + * scan. Set probe pending flag and invoke EH. + * + * LOCKING: + * SCSI layer (we don't care) + * + * RETURNS: + * Zero. + */ +static int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, + unsigned int id, unsigned int lun) +{ + struct ata_port *ap = ata_shost_to_port(shost); + unsigned long flags; + int rc = 0; + + if (!ap->ops->error_handler) + return -EOPNOTSUPP; + + if ((channel != SCAN_WILD_CARD && channel != 0) || + (lun != SCAN_WILD_CARD && lun != 0)) + return -EINVAL; + + spin_lock_irqsave(ap->lock, flags); + + if (id == SCAN_WILD_CARD) { + ap->eh_info.probe_mask |= (1 << ATA_MAX_DEVICES) - 1; + ap->eh_info.action |= ATA_EH_SOFTRESET; + } else { + struct ata_device *dev = ata_find_dev(ap, id); + + if (dev) { + ap->eh_info.probe_mask |= 1 << dev->devno; + ap->eh_info.action |= ATA_EH_SOFTRESET; + ap->eh_info.flags |= ATA_EHI_RESUME_LINK; + } else + rc = -EINVAL; + } + + if (rc == 0) + ata_port_schedule_eh(ap); + + spin_unlock_irqrestore(ap->lock, flags); + + return rc; +} + +/** + * ata_scsi_dev_rescan - initiate scsi_rescan_device() + * @data: Pointer to ATA port to perform scsi_rescan_device() + * + * After ATA pass thru (SAT) commands are executed successfully, + * libata need to propagate the changes to SCSI layer. This + * function must be executed from ata_aux_wq such that sdev + * attach/detach don't race with rescan. + * + * LOCKING: + * Kernel thread context (may sleep). + */ +void ata_scsi_dev_rescan(void *data) +{ + struct ata_port *ap = data; + struct ata_device *dev; + unsigned int i; + + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ata_dev_enabled(dev) && dev->sdev) + scsi_rescan_device(&(dev->sdev->sdev_gendev)); + } +} + +/** + * ata_sas_port_alloc - Allocate port for a SAS attached SATA device + * @pdev: PCI device that the scsi device is attached to + * @port_info: Information from low-level host driver + * @host: SCSI host that the scsi device is attached to + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * ata_port pointer on success / NULL on failure. + */ + +struct ata_port *ata_sas_port_alloc(struct ata_host_set *host_set, + struct ata_port_info *port_info, + struct Scsi_Host *host) +{ + struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL); + struct ata_probe_ent *ent; + + if (!ap) + return NULL; + + ent = ata_probe_ent_alloc(host_set->dev, port_info); + if (!ent) { + kfree(ap); + return NULL; + } + + ata_port_init(ap, host_set, ent, 0); + ap->lock = host->host_lock; + kfree(ent); + return ap; +} +EXPORT_SYMBOL_GPL(ata_sas_port_alloc); + +/** + * ata_sas_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates DMA pad. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sas_port_start(struct ata_port *ap) +{ + return ata_pad_alloc(ap, ap->dev); +} +EXPORT_SYMBOL_GPL(ata_sas_port_start); + +/** + * ata_port_stop - Undo ata_sas_port_start() + * @ap: Port to shut down + * + * Frees the DMA pad. + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sas_port_stop(struct ata_port *ap) +{ + ata_pad_free(ap, ap->dev); +} +EXPORT_SYMBOL_GPL(ata_sas_port_stop); + +/** + * ata_sas_port_init - Initialize a SATA device + * @ap: SATA port to initialize + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +int ata_sas_port_init(struct ata_port *ap) +{ + int rc = ap->ops->port_start(ap); + + if (!rc) + rc = ata_bus_probe(ap); + + return rc; +} +EXPORT_SYMBOL_GPL(ata_sas_port_init); + +/** + * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc + * @ap: SATA port to destroy + * + */ + +void ata_sas_port_destroy(struct ata_port *ap) +{ + ap->ops->port_stop(ap); + kfree(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_port_destroy); + +/** + * ata_sas_slave_configure - Default slave_config routine for libata devices + * @sdev: SCSI device to configure + * @ap: ATA port to which SCSI device is attached + * + * RETURNS: + * Zero. + */ + +int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) +{ + ata_scsi_sdev_config(sdev); + ata_scsi_dev_config(sdev, ap->device); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_slave_configure); + +/** + * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device + * @cmd: SCSI command to be sent + * @done: Completion function, called when command is complete + * @ap: ATA port to which the command is being sent + * + * RETURNS: + * Zero. + */ + +int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), + struct ata_port *ap) +{ + ata_scsi_dump_cdb(ap, cmd); + + if (likely(ata_scsi_dev_enabled(ap->device))) + __ata_scsi_queuecmd(cmd, done, ap->device); + else { + cmd->result = (DID_BAD_TARGET << 16); + done(cmd); + } + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_queuecmd); |