diff options
Diffstat (limited to 'drivers/ata/pata_ali.c')
| -rw-r--r-- | drivers/ata/pata_ali.c | 80 |
1 files changed, 18 insertions, 62 deletions
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index ab44d18850f..d40edebb510 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -34,7 +34,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_ali" -#define DRV_VERSION "0.7.2" +#define DRV_VERSION "0.7.4" /* * Cable special cases @@ -90,59 +90,6 @@ static int ali_c2_cable_detect(struct ata_port *ap) } /** - * ali_early_error_handler - reset for eary chip - * @ap: ATA port - * - * Handle the reset callback for the later chips with cable detect - */ - -static int ali_c2_pre_reset(struct ata_port *ap) -{ - ap->cbl = ali_c2_cable_detect(ap); - return ata_std_prereset(ap); -} - -static void ali_c2_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, ali_c2_pre_reset, - ata_std_softreset, NULL, - ata_std_postreset); -} - -/** - * ali_early_cable_detect - cable detection - * @ap: ATA port - * - * Perform cable detection for older chipsets. This turns out to be - * rather easy to implement - */ - -static int ali_early_cable_detect(struct ata_port *ap) -{ - return ATA_CBL_PATA40; -} - -/** - * ali_early_probe_init - reset for early chip - * @ap: ATA port - * - * Handle the reset callback for the early (pre cable detect) chips. - */ - -static int ali_early_pre_reset(struct ata_port *ap) -{ - ap->cbl = ali_early_cable_detect(ap); - return ata_std_prereset(ap); -} - -static void ali_early_error_handler(struct ata_port *ap) -{ - return ata_bmdma_drive_eh(ap, ali_early_pre_reset, - ata_std_softreset, NULL, - ata_std_postreset); -} - -/** * ali_20_filter - filter for earlier ALI DMA * @ap: ALi ATA port * @adev: attached device @@ -151,7 +98,7 @@ static void ali_early_error_handler(struct ata_port *ap) * fix that later on. Also ensure we do not do UDMA on WDC drives */ -static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device *adev, unsigned long mask) +static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask) { char model_num[ATA_ID_PROD_LEN + 1]; /* No DMA on anything but a disk for now */ @@ -160,7 +107,7 @@ static unsigned long ali_20_filter(const struct ata_port *ap, struct ata_device ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num)); if (strstr(model_num, "WDC")) return mask &= ~ATA_MASK_UDMA; - return ata_pci_default_filter(ap, adev, mask); + return ata_pci_default_filter(adev, mask); } /** @@ -314,7 +261,6 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) /** * ali_lock_sectors - Keep older devices to 255 sector mode - * @ap: ATA port * @adev: Device * * Called during the bus probe for each device that is found. We use @@ -324,7 +270,7 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) * slower PIO methods */ -static void ali_lock_sectors(struct ata_port *ap, struct ata_device *adev) +static void ali_lock_sectors(struct ata_device *adev) { adev->max_sectors = 255; } @@ -345,8 +291,10 @@ static struct scsi_host_template ali_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, +#ifdef CONFIG_PM .resume = ata_scsi_device_resume, .suspend = ata_scsi_device_suspend, +#endif }; /* @@ -364,8 +312,9 @@ static struct ata_port_operations ali_early_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = ali_early_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, @@ -400,8 +349,9 @@ static struct ata_port_operations ali_20_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = ali_early_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -438,8 +388,9 @@ static struct ata_port_operations ali_c2_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = ali_c2_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ali_c2_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -475,8 +426,9 @@ static struct ata_port_operations ali_c5_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = ali_c2_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ali_c2_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -667,11 +619,13 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) return ata_pci_init_one(pdev, port_info, 2); } +#ifdef CONFIG_PM static int ali_reinit_one(struct pci_dev *pdev) { ali_init_chipset(pdev); return ata_pci_device_resume(pdev); } +#endif static const struct pci_device_id ali[] = { { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), }, @@ -685,8 +639,10 @@ static struct pci_driver ali_pci_driver = { .id_table = ali, .probe = ali_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = ali_reinit_one, +#endif }; static int __init ali_init(void) |