diff options
Diffstat (limited to 'drivers/ata/pata_ali.c')
| -rw-r--r-- | drivers/ata/pata_ali.c | 205 |
1 files changed, 69 insertions, 136 deletions
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 8786455c901..fcabe46f262 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -36,6 +36,10 @@ #define DRV_NAME "pata_ali" #define DRV_VERSION "0.7.5" +static int ali_atapi_dma = 0; +module_param_named(atapi_dma, ali_atapi_dma, int, 0644); +MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)"); + /* * Cable special cases */ @@ -117,7 +121,7 @@ static unsigned long ali_20_filter(struct ata_device *adev, unsigned long mask) ata_id_c_string(adev->id, model_num, ATA_ID_PROD, sizeof(model_num)); if (strstr(model_num, "WDC")) return mask &= ~ATA_MASK_UDMA; - return ata_pci_default_filter(adev, mask); + return ata_bmdma_mode_filter(adev, mask); } /** @@ -270,6 +274,27 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) } /** + * ali_warn_atapi_dma - Warn about ATAPI DMA disablement + * @adev: Device + * + * Whine about ATAPI DMA disablement if @adev is an ATAPI device. + * Can be used as ->dev_config. + */ + +static void ali_warn_atapi_dma(struct ata_device *adev) +{ + struct ata_eh_context *ehc = &adev->link->eh_context; + int print_info = ehc->i.flags & ATA_EHI_PRINTINFO; + + if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) { + ata_dev_printk(adev, KERN_WARNING, + "WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled\n"); + ata_dev_printk(adev, KERN_WARNING, + "WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n"); + } +} + +/** * ali_lock_sectors - Keep older devices to 255 sector mode * @adev: Device * @@ -283,6 +308,7 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) static void ali_lock_sectors(struct ata_device *adev) { adev->max_sectors = 255; + ali_warn_atapi_dma(adev); } /** @@ -294,6 +320,18 @@ static void ali_lock_sectors(struct ata_device *adev) static int ali_check_atapi_dma(struct ata_queued_cmd *qc) { + if (!ali_atapi_dma) { + /* FIXME: pata_ali can't do ATAPI DMA reliably but the + * IDE alim15x3 driver can. I tried lots of things + * but couldn't find what the actual difference was. + * If you got an idea, please write it to + * linux-ide@vger.kernel.org and cc htejun@gmail.com. + * + * Disable ATAPI DMA for now. + */ + return -EOPNOTSUPP; + } + /* If its not a media command, its not worth it */ if (atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC) return -EOPNOTSUPP; @@ -301,21 +339,7 @@ static int ali_check_atapi_dma(struct ata_queued_cmd *qc) } static struct scsi_host_template ali_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, + ATA_BMDMA_SHT(DRV_NAME), }; /* @@ -323,29 +347,15 @@ static struct scsi_host_template ali_sht = { */ static struct ata_port_operations ali_early_port_ops = { - .set_piomode = ali_set_piomode, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, + .inherits = &ata_sff_port_ops, .cable_detect = ata_cable_40wire, + .set_piomode = ali_set_piomode, +}; - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - - .port_start = ata_sff_port_start, +static const struct ata_port_operations ali_dma_base_ops = { + .inherits = &ata_bmdma_port_ops, + .set_piomode = ali_set_piomode, + .set_dmamode = ali_set_dmamode, }; /* @@ -353,113 +363,31 @@ static struct ata_port_operations ali_early_port_ops = { * detect */ static struct ata_port_operations ali_20_port_ops = { - .set_piomode = ali_set_piomode, - .set_dmamode = ali_set_dmamode, + .inherits = &ali_dma_base_ops, + .cable_detect = ata_cable_40wire, .mode_filter = ali_20_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, + .check_atapi_dma = ali_check_atapi_dma, .dev_config = ali_lock_sectors, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = ata_cable_40wire, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - - .port_start = ata_sff_port_start, }; /* * Port operations for DMA capable ALi with cable detect */ static struct ata_port_operations ali_c2_port_ops = { - .set_piomode = ali_set_piomode, - .set_dmamode = ali_set_dmamode, - .mode_filter = ata_pci_default_filter, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, + .inherits = &ali_dma_base_ops, .check_atapi_dma = ali_check_atapi_dma, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - .dev_config = ali_lock_sectors, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, .cable_detect = ali_c2_cable_detect, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - - .port_start = ata_sff_port_start, + .dev_config = ali_lock_sectors, }; /* * Port operations for DMA capable ALi with cable detect and LBA48 */ static struct ata_port_operations ali_c5_port_ops = { - .set_piomode = ali_set_piomode, - .set_dmamode = ali_set_dmamode, - .mode_filter = ata_pci_default_filter, - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, + .inherits = &ali_dma_base_ops, .check_atapi_dma = ali_check_atapi_dma, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, + .dev_config = ali_warn_atapi_dma, .cable_detect = ali_c2_cable_detect, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - - .port_start = ata_sff_port_start, }; @@ -521,7 +449,7 @@ static void ali_init_chipset(struct pci_dev *pdev) } pci_dev_put(isa_bridge); pci_dev_put(north); - ata_pci_clear_simplex(pdev); + ata_pci_bmdma_clear_simplex(pdev); } /** * ali_init_one - discovery callback @@ -535,14 +463,12 @@ static void ali_init_chipset(struct pci_dev *pdev) static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { static const struct ata_port_info info_early = { - .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .port_ops = &ali_early_port_ops }; /* Revision 0x20 added DMA */ static const struct ata_port_info info_20 = { - .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -550,7 +476,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0x20 with support logic added UDMA */ static const struct ata_port_info info_20_udma = { - .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -559,7 +484,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC2 adds UDMA66 */ static const struct ata_port_info info_c2 = { - .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -568,7 +492,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC3 is UDMA66 for now */ static const struct ata_port_info info_c3 = { - .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -577,7 +500,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC4 is UDMA100 */ static const struct ata_port_info info_c4 = { - .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -586,7 +508,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) }; /* Revision 0xC5 is UDMA133 with LBA48 DMA */ static const struct ata_port_info info_c5 = { - .sht = &ali_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -597,6 +518,11 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) const struct ata_port_info *ppi[] = { NULL, NULL }; u8 tmp; struct pci_dev *isa_bridge; + int rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; /* * The chipset revision selects the driver operations and @@ -626,14 +552,21 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ppi[0] = &info_20_udma; pci_dev_put(isa_bridge); } - return ata_pci_init_one(pdev, ppi); + return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL); } #ifdef CONFIG_PM static int ali_reinit_one(struct pci_dev *pdev) { + struct ata_host *host = dev_get_drvdata(&pdev->dev); + int rc; + + rc = ata_pci_device_do_resume(pdev); + if (rc) + return rc; ali_init_chipset(pdev); - return ata_pci_device_resume(pdev); + ata_host_resume(host); + return 0; } #endif |