1 files changed, 707 insertions, 0 deletions

diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
new file mode 100644
index 00000000000..6ab568428a1
--- /dev/null
+++ b/drivers/ata/pata_amd.c
@@ -0,0 +1,707 @@
+/*
+ * pata_amd.c 	- AMD PATA for new ATA layer
+ *			  (C) 2005-2006 Red Hat Inc
+ *			  Alan Cox <alan@redhat.com>
+ *
+ *  Based on pata-sil680. Errata information is taken from data sheets
+ *  and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are
+ *  claimed by sata-nv.c.
+ *
+ *  TODO:
+ *	Variable system clock when/if it makes sense
+ *	Power management on ports
+ *
+ *
+ *  Documentation publically available.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "pata_amd"
+#define DRV_VERSION "0.2.2"
+
+/**
+ *	timing_setup		-	shared timing computation and load
+ *	@ap: ATA port being set up
+ *	@adev: drive being configured
+ *	@offset: port offset
+ *	@speed: target speed
+ *	@clock: clock multiplier (number of times 33MHz for this part)
+ *
+ *	Perform the actual timing set up for Nvidia or AMD PATA devices.
+ *	The actual devices vary so they all call into this helper function
+ *	providing the clock multipler and offset (because AMD and Nvidia put
+ *	the ports at different locations).
+ */
+
+static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offset, int speed, int clock)
+{
+	static const unsigned char amd_cyc2udma[] = {
+		6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7
+	};
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct ata_device *peer = ata_dev_pair(adev);
+	int dn = ap->port_no * 2 + adev->devno;
+	struct ata_timing at, apeer;
+	int T, UT;
+	const int amd_clock = 33333;	/* KHz. */
+	u8 t;
+
+	T = 1000000000 / amd_clock;
+	UT = T / min_t(int, max_t(int, clock, 1), 2);
+
+	if (ata_timing_compute(adev, speed, &at, T, UT) < 0) {
+		dev_printk(KERN_ERR, &pdev->dev, "unknown mode %d.\n", speed);
+		return;
+	}
+
+	if (peer) {
+		/* This may be over conservative */
+		if (peer->dma_mode) {
+			ata_timing_compute(peer, peer->dma_mode, &apeer, T, UT);
+			ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT);
+		}
+		ata_timing_compute(peer, peer->pio_mode, &apeer, T, UT);
+		ata_timing_merge(&apeer, &at, &at, ATA_TIMING_8BIT);
+	}
+
+	if (speed == XFER_UDMA_5 && amd_clock <= 33333) at.udma = 1;
+	if (speed == XFER_UDMA_6 && amd_clock <= 33333) at.udma = 15;
+
+	/*
+	 *	Now do the setup work
+	 */
+
+	/* Configure the address set up timing */
+	pci_read_config_byte(pdev, offset + 0x0C, &t);
+	t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
+	pci_write_config_byte(pdev, offset + 0x0C , t);
+
+	/* Configure the 8bit I/O timing */
+	pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)),
+		((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1));
+
+	/* Drive timing */
+	pci_write_config_byte(pdev, offset + 0x08 + (3 - dn),
+		((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1));
+
+	switch (clock) {
+		case 1:
+		t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03;
+		break;
+
+		case 2:
+		t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03;
+		break;
+
+		case 3:
+		t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03;
+		break;
+
+		case 4:
+		t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03;
+		break;
+
+		default:
+			return;
+	}
+
+	/* UDMA timing */
+	pci_write_config_byte(pdev, offset + 0x10 + (3 - dn), t);
+}
+
+/**
+ *	amd_probe_init		-	cable detection
+ *	@ap: ATA port
+ *
+ *	Perform cable detection. The BIOS stores this in PCI config
+ *	space for us.
+ */
+
+static int amd_pre_reset(struct ata_port *ap)
+{
+	static const u32 bitmask[2] = {0x03, 0xC0};
+	static const struct pci_bits amd_enable_bits[] = {
+		{ 0x40, 1, 0x02, 0x02 },
+		{ 0x40, 1, 0x01, 0x01 }
+	};
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 ata66;
+	
+	if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
+		ata_port_disable(ap);
+		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+		return 0;
+	}
+
+	pci_read_config_byte(pdev, 0x42, &ata66);
+	if (ata66 & bitmask[ap->port_no])
+		ap->cbl = ATA_CBL_PATA80;
+	else
+		ap->cbl = ATA_CBL_PATA40;
+	return ata_std_prereset(ap);
+
+}
+
+static void amd_error_handler(struct ata_port *ap)
+{
+	return ata_bmdma_drive_eh(ap, amd_pre_reset,
+				      ata_std_softreset, NULL,
+				      ata_std_postreset);
+}
+
+static int amd_early_pre_reset(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	static struct pci_bits amd_enable_bits[] = {
+		{ 0x40, 1, 0x02, 0x02 },
+		{ 0x40, 1, 0x01, 0x01 }
+	};
+
+	if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) {
+		ata_port_disable(ap);
+		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+		return 0;
+	}
+	/* No host side cable detection */
+	ap->cbl = ATA_CBL_PATA80;
+	return ata_std_prereset(ap);
+
+}
+
+static void amd_early_error_handler(struct ata_port *ap)
+{
+	ata_bmdma_drive_eh(ap, amd_early_pre_reset,
+			       ata_std_softreset, NULL,
+			       ata_std_postreset);
+}
+
+/**
+ *	amd33_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Program the AMD registers for PIO mode.
+ */
+
+static void amd33_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x40, adev->pio_mode, 1);
+}
+
+static void amd66_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x40, adev->pio_mode, 2);
+}
+
+static void amd100_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x40, adev->pio_mode, 3);
+}
+
+static void amd133_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x40, adev->pio_mode, 4);
+}
+
+/**
+ *	amd33_set_dmamode	-	set initial DMA mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Program the MWDMA/UDMA modes for the AMD and Nvidia
+ *	chipset.
+ */
+
+static void amd33_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x40, adev->dma_mode, 1);
+}
+
+static void amd66_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x40, adev->dma_mode, 2);
+}
+
+static void amd100_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x40, adev->dma_mode, 3);
+}
+
+static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x40, adev->dma_mode, 4);
+}
+
+
+/**
+ *	nv_probe_init	-	cable detection
+ *	@ap: ATA port
+ *
+ *	Perform cable detection. The BIOS stores this in PCI config
+ *	space for us.
+ */
+
+static int nv_pre_reset(struct ata_port *ap) {
+	static const u8 bitmask[2] = {0x03, 0xC0};
+
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 ata66;
+	u16 udma;
+
+	pci_read_config_byte(pdev, 0x52, &ata66);
+	if (ata66 & bitmask[ap->port_no])
+		ap->cbl = ATA_CBL_PATA80;
+	else
+		ap->cbl = ATA_CBL_PATA40;
+
+	/* We now have to double check because the Nvidia boxes BIOS
+	   doesn't always set the cable bits but does set mode bits */
+
+	pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma);
+	if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400)
+		ap->cbl = ATA_CBL_PATA80;
+	return ata_std_prereset(ap);
+}
+
+static void nv_error_handler(struct ata_port *ap)
+{
+	ata_bmdma_drive_eh(ap, nv_pre_reset,
+			       ata_std_softreset, NULL,
+			       ata_std_postreset);
+}
+/**
+ *	nv100_set_piomode	-	set initial PIO mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Program the AMD registers for PIO mode.
+ */
+
+static void nv100_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x50, adev->pio_mode, 3);
+}
+
+static void nv133_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x50, adev->pio_mode, 4);
+}
+
+/**
+ *	nv100_set_dmamode	-	set initial DMA mode data
+ *	@ap: ATA interface
+ *	@adev: ATA device
+ *
+ *	Program the MWDMA/UDMA modes for the AMD and Nvidia
+ *	chipset.
+ */
+
+static void nv100_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x50, adev->dma_mode, 3);
+}
+
+static void nv133_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	timing_setup(ap, adev, 0x50, adev->dma_mode, 4);
+}
+
+static struct scsi_host_template amd_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.max_sectors		= ATA_MAX_SECTORS,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= ata_scsi_slave_config,
+	.bios_param		= ata_std_bios_param,
+};
+
+static struct ata_port_operations amd33_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= amd33_set_piomode,
+	.set_dmamode	= amd33_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= amd_early_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static struct ata_port_operations amd66_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= amd66_set_piomode,
+	.set_dmamode	= amd66_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= amd_early_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static struct ata_port_operations amd100_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= amd100_set_piomode,
+	.set_dmamode	= amd100_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= amd_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static struct ata_port_operations amd133_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= amd133_set_piomode,
+	.set_dmamode	= amd133_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= amd_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static struct ata_port_operations nv100_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= nv100_set_piomode,
+	.set_dmamode	= nv100_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= nv_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static struct ata_port_operations nv133_port_ops = {
+	.port_disable	= ata_port_disable,
+	.set_piomode	= nv133_set_piomode,
+	.set_dmamode	= nv133_set_dmamode,
+	.mode_filter	= ata_pci_default_filter,
+	.tf_load	= ata_tf_load,
+	.tf_read	= ata_tf_read,
+	.check_status 	= ata_check_status,
+	.exec_command	= ata_exec_command,
+	.dev_select 	= ata_std_dev_select,
+
+	.freeze		= ata_bmdma_freeze,
+	.thaw		= ata_bmdma_thaw,
+	.error_handler	= nv_error_handler,
+	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+
+	.bmdma_setup 	= ata_bmdma_setup,
+	.bmdma_start 	= ata_bmdma_start,
+	.bmdma_stop	= ata_bmdma_stop,
+	.bmdma_status 	= ata_bmdma_status,
+
+	.qc_prep 	= ata_qc_prep,
+	.qc_issue	= ata_qc_issue_prot,
+	.eng_timeout	= ata_eng_timeout,
+	.data_xfer	= ata_pio_data_xfer,
+
+	.irq_handler	= ata_interrupt,
+	.irq_clear	= ata_bmdma_irq_clear,
+
+	.port_start	= ata_port_start,
+	.port_stop	= ata_port_stop,
+	.host_stop	= ata_host_stop
+};
+
+static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	static struct ata_port_info info[10] = {
+		{	/* 0: AMD 7401 */
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,	/* No SWDMA */
+			.udma_mask = 0x07,	/* UDMA 33 */
+			.port_ops = &amd33_port_ops
+		},
+		{	/* 1: Early AMD7409 - no swdma */
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x1f,	/* UDMA 66 */
+			.port_ops = &amd66_port_ops
+		},
+		{	/* 2: AMD 7409, no swdma errata */
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x1f,	/* UDMA 66 */
+			.port_ops = &amd66_port_ops
+		},
+		{	/* 3: AMD 7411 */
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x3f,	/* UDMA 100 */
+			.port_ops = &amd100_port_ops
+		},
+		{	/* 4: AMD 7441 */
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x3f,	/* UDMA 100 */
+			.port_ops = &amd100_port_ops
+		},
+		{	/* 5: AMD 8111*/
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x7f,	/* UDMA 133, no swdma */
+			.port_ops = &amd133_port_ops
+		},
+		{	/* 6: AMD 8111 UDMA 100 (Serenade) */
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x3f,	/* UDMA 100, no swdma */
+			.port_ops = &amd133_port_ops
+		},
+		{	/* 7: Nvidia Nforce */
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x3f,	/* UDMA 100 */
+			.port_ops = &nv100_port_ops
+		},
+		{	/* 8: Nvidia Nforce2 and later */
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x7f,	/* UDMA 133, no swdma */
+			.port_ops = &nv133_port_ops
+		},
+		{	/* 9: AMD CS5536 (Geode companion) */
+			.sht = &amd_sht,
+			.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
+			.pio_mask = 0x1f,
+			.mwdma_mask = 0x07,
+			.udma_mask = 0x3f,	/* UDMA 100 */
+			.port_ops = &amd100_port_ops
+		}
+	};
+	static struct ata_port_info *port_info[2];
+	static int printed_version;
+	int type = id->driver_data;
+	u8 rev;
+	u8 fifo;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+	pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+	pci_read_config_byte(pdev, 0x41, &fifo);
+
+	/* Check for AMD7409 without swdma errata and if found adjust type */
+	if (type == 1 && rev > 0x7)
+		type = 2;
+
+	/* Check for AMD7411 */
+	if (type == 3)
+		/* FIFO is broken */
+		pci_write_config_byte(pdev, 0x41, fifo & 0x0F);
+	else
+		pci_write_config_byte(pdev, 0x41, fifo | 0xF0);
+
+	/* Serenade ? */
+	if (type == 5 && pdev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
+			 pdev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
+		type = 6;	/* UDMA 100 only */
+
+	if (type < 3)
+		ata_pci_clear_simplex(pdev);
+
+	/* And fire it up */
+
+	port_info[0] = port_info[1] = &info[type];
+	return ata_pci_init_one(pdev, port_info, 2);
+}
+
+static const struct pci_device_id amd[] = {
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_COBRA_7401,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  0 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_VIPER_7409,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  1 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_VIPER_7411,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  3 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_OPUS_7441,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  4 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_8111_IDE,		PCI_ANY_ID, PCI_ANY_ID, 0, 0,  5 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  7 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  8 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  8 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0,  8 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+	{ PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE,	PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 },
+	{ PCI_VENDOR_ID_AMD,	PCI_DEVICE_ID_AMD_CS5536_IDE,		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 },
+	{ 0, },
+};
+
+static struct pci_driver amd_pci_driver = {
+        .name 		= DRV_NAME,
+	.id_table	= amd,
+	.probe 		= amd_init_one,
+	.remove		= ata_pci_remove_one
+};
+
+static int __init amd_init(void)
+{
+	return pci_register_driver(&amd_pci_driver);
+}
+
+static void __exit amd_exit(void)
+{
+	pci_unregister_driver(&amd_pci_driver);
+}
+
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("low-level driver for AMD PATA IDE");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, amd);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(amd_init);
+module_exit(amd_exit);