summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_atp867x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_atp867x.c')
-rw-r--r--drivers/ata/pata_atp867x.c101
1 files changed, 70 insertions, 31 deletions
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index 7990de925d2..6fe7ded40c6 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -118,20 +118,13 @@ struct atp867x_priv {
int pci66mhz;
};
-static inline u8 atp867x_speed_to_mode(u8 speed)
-{
- return speed - XFER_UDMA_0 + 1;
-}
-
static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct atp867x_priv *dp = ap->private_data;
u8 speed = adev->dma_mode;
u8 b;
- u8 mode;
-
- mode = atp867x_speed_to_mode(speed);
+ u8 mode = speed - XFER_UDMA_0 + 1;
/*
* Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
@@ -156,25 +149,38 @@ static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
iowrite8(b, dp->dma_mode);
}
-static int atp867x_get_active_clocks_shifted(unsigned int clk)
+static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
+ unsigned int clk)
{
+ struct atp867x_priv *dp = ap->private_data;
unsigned char clocks = clk;
+ /*
+ * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
+ * on 66MHz bus
+ */
+ if (dp->pci66mhz)
+ clocks++;
+
switch (clocks) {
case 0:
clocks = 1;
break;
- case 1 ... 7:
- break;
- case 8 ... 12:
- clocks = 7;
+ case 1 ... 6:
break;
default:
printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
- "Using default 8clk.\n", clk);
- clocks = 0; /* 8 clk */
+ "Using 12clk.\n", clk);
+ case 9 ... 12:
+ clocks = 7; /* 12 clk */
break;
+ case 7:
+ case 8: /* default 8 clk */
+ clocks = 0;
+ goto active_clock_shift_done;
}
+
+active_clock_shift_done:
return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
}
@@ -188,20 +194,20 @@ static int atp867x_get_recover_clocks_shifted(unsigned int clk)
break;
case 1 ... 11:
break;
- case 12:
- clocks = 0;
- break;
- case 13: case 14:
- --clocks;
+ case 13:
+ case 14:
+ --clocks; /* by the spec */
break;
case 15:
break;
default:
printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
- "Using default 15clk.\n", clk);
- clocks = 0; /* 12 clk */
+ "Using default 12clk.\n", clk);
+ case 12: /* default 12 clk */
+ clocks = 0;
break;
}
+
return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
}
@@ -230,25 +236,38 @@ static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
iowrite8(b, dp->dma_mode);
- b = atp867x_get_active_clocks_shifted(t.active) |
- atp867x_get_recover_clocks_shifted(t.recover);
- if (dp->pci66mhz)
- b += 0x10;
+ b = atp867x_get_active_clocks_shifted(ap, t.active) |
+ atp867x_get_recover_clocks_shifted(t.recover);
if (adev->devno & 1)
iowrite8(b, dp->slave_piospd);
else
iowrite8(b, dp->mstr_piospd);
- /*
- * use the same value for comand timing as for PIO timimg
- */
+ b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
+ atp867x_get_recover_clocks_shifted(t.rec8b);
+
iowrite8(b, dp->eightb_piospd);
}
+static int atp867x_cable_override(struct pci_dev *pdev)
+{
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
+ (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
+ pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
+ return 1;
+ }
+ return 0;
+}
+
static int atp867x_cable_detect(struct ata_port *ap)
{
- return ATA_CBL_PATA40_SHORT;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (atp867x_cable_override(pdev))
+ return ATA_CBL_PATA40_SHORT;
+
+ return ATA_CBL_PATA_UNK;
}
static struct scsi_host_template atp867x_sht = {
@@ -471,7 +490,6 @@ static int atp867x_init_one(struct pci_dev *pdev,
static const struct ata_port_info info_867x = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.port_ops = &atp867x_ops,
};
@@ -515,6 +533,23 @@ err_out:
return rc;
}
+#ifdef CONFIG_PM
+static int atp867x_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ atp867x_fixup(host);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct pci_device_id atp867x_pci_tbl[] = {
{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 },
{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 },
@@ -526,6 +561,10 @@ static struct pci_driver atp867x_driver = {
.id_table = atp867x_pci_tbl,
.probe = atp867x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = atp867x_reinit_one,
+#endif
};
static int __init atp867x_init(void)