summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_hpt3x2n.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_hpt3x2n.c')
-rw-r--r--drivers/ata/pata_hpt3x2n.c12
1 files changed, 5 insertions, 7 deletions
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index d2239bbdb79..eca68caf5f4 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x2n"
-#define DRV_VERSION "0.3.13"
+#define DRV_VERSION "0.3.14"
enum {
HPT_PCI_FAST = (1 << 31),
@@ -418,7 +418,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
u16 sr;
u32 total = 0;
- printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n");
+ pr_warning(DRV_NAME ": BIOS clock data not set.\n");
/* This is the process the HPT371 BIOS is reported to use */
for (i = 0; i < 128; i++) {
@@ -528,8 +528,7 @@ hpt372n:
ppi[0] = &info_hpt372n;
break;
default:
- printk(KERN_ERR
- "pata_hpt3x2n: PCI table is bogus please report (%d).\n",
+ pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
dev->device);
return -ENODEV;
}
@@ -579,12 +578,11 @@ hpt372n:
pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
}
if (adjust == 8) {
- printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
+ pr_err(DRV_NAME ": DPLL did not stabilize!\n");
return -ENODEV;
}
- printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
- pci_mhz);
+ pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
/*
* Set our private data up. We only need a few flags