diff options
Diffstat (limited to 'drivers/ata/pata_hpt3x2n.c')
| -rw-r--r-- | drivers/ata/pata_hpt3x2n.c | 85 |
1 files changed, 20 insertions, 65 deletions
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index 9f1c084f846..d5c9fd7b82b 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c @@ -148,7 +148,7 @@ static int hpt3x2n_cable_detect(struct ata_port *ap) * Reset the hardware and state machine, */ -static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline) +static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline) { struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); @@ -156,19 +156,7 @@ static int hpt3xn_pre_reset(struct ata_link *link, unsigned long deadline) pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(link, deadline); -} - -/** - * hpt3x2n_error_handler - probe the hpt3x2n bus - * @ap: ATA port to reset - * - * Perform the probe reset handling for the 3x2N - */ - -static void hpt3x2n_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, hpt3xn_pre_reset, ata_std_softreset, NULL, ata_std_postreset); + return ata_sff_prereset(link, deadline); } /** @@ -320,7 +308,7 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int writing) return 0; } -static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc) +static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc) { struct ata_taskfile *tf = &qc->tf; struct ata_port *ap = qc->ap; @@ -335,25 +323,11 @@ static unsigned int hpt3x2n_qc_issue_prot(struct ata_queued_cmd *qc) hpt3x2n_set_clock(ap, 0x23); } } - return ata_qc_issue_prot(qc); + return ata_sff_qc_issue(qc); } static struct scsi_host_template hpt3x2n_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, + ATA_BMDMA_SHT(DRV_NAME), }; /* @@ -361,37 +335,15 @@ static struct scsi_host_template hpt3x2n_sht = { */ static struct ata_port_operations hpt3x2n_port_ops = { - .set_piomode = hpt3x2n_set_piomode, - .set_dmamode = hpt3x2n_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = hpt3x2n_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = hpt3x2n_cable_detect, + .inherits = &ata_bmdma_port_ops, - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, .bmdma_stop = hpt3x2n_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = hpt3x2n_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, + .qc_issue = hpt3x2n_qc_issue, - .port_start = ata_sff_port_start, + .cable_detect = hpt3x2n_cable_detect, + .set_piomode = hpt3x2n_set_piomode, + .set_dmamode = hpt3x2n_set_dmamode, + .prereset = hpt3x2n_pre_reset, }; /** @@ -488,15 +440,13 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* HPT372N and friends - UDMA133 */ static const struct ata_port_info info = { - .sht = &hpt3x2n_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = ATA_UDMA6, .port_ops = &hpt3x2n_port_ops }; - struct ata_port_info port = info; - const struct ata_port_info *ppi[] = { &port, NULL }; + const struct ata_port_info *ppi[] = { &info, NULL }; u8 irqmask; u32 class_rev; @@ -505,6 +455,12 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) unsigned int f_low, f_high; int adjust; unsigned long iobase = pci_resource_start(dev, 4); + void *hpriv = NULL; + int rc; + + rc = pcim_enable_device(dev); + if (rc) + return rc; pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xFF; @@ -586,9 +542,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) pci_mhz); /* Set our private data up. We only need a few flags so we use it directly */ - port.private_data = NULL; if (pci_mhz > 60) { - port.private_data = (void *)PCI66; + hpriv = (void *)PCI66; /* * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in * the MISC. register to stretch the UltraDMA Tss timing. @@ -599,7 +554,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) } /* Now kick off ATA set up */ - return ata_pci_init_one(dev, ppi); + return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv); } static const struct pci_device_id hpt3x2n[] = { |