diff options
Diffstat (limited to 'drivers/ata/pata_legacy.c')
-rw-r--r-- | drivers/ata/pata_legacy.c | 166 |
1 files changed, 82 insertions, 84 deletions
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 581cb33c6f4..4223e10de6a 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -164,14 +164,14 @@ static struct ata_port_operations simple_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer_noirq, + .data_xfer = ata_data_xfer_noirq, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; static struct ata_port_operations legacy_port_ops = { @@ -189,14 +189,14 @@ static struct ata_port_operations legacy_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer_noirq, + .data_xfer = ata_data_xfer_noirq, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -257,31 +257,33 @@ static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsig local_irq_save(flags); /* Perform the 32bit I/O synchronization sequence */ - inb(ap->ioaddr.nsect_addr); - inb(ap->ioaddr.nsect_addr); - inb(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); + ioread8(ap->ioaddr.nsect_addr); /* Now the data */ if (write_data) - outsl(ap->ioaddr.data_addr, buf, buflen >> 2); + iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else - insl(ap->ioaddr.data_addr, buf, buflen >> 2); + ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); if (unlikely(slop)) { u32 pad; if (write_data) { memcpy(&pad, buf + buflen - slop, slop); - outl(le32_to_cpu(pad), ap->ioaddr.data_addr); + pad = le32_to_cpu(pad); + iowrite32(pad, ap->ioaddr.data_addr); } else { - pad = cpu_to_le16(inl(ap->ioaddr.data_addr)); + pad = ioread32(ap->ioaddr.data_addr); + pad = cpu_to_le16(pad); memcpy(buf + buflen - slop, &pad, slop); } } local_irq_restore(flags); } else - ata_pio_data_xfer_noirq(adev, buf, buflen, write_data); + ata_data_xfer_noirq(adev, buf, buflen, write_data); } static struct ata_port_operations pdc20230_port_ops = { @@ -303,10 +305,10 @@ static struct ata_port_operations pdc20230_port_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -332,8 +334,8 @@ static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev) inb(0x3E6); inb(0x3E6); - outb(recover << 4 | active, ap->ioaddr.device_addr); - inb(ap->ioaddr.status_addr); + iowrite8(recover << 4 | active, ap->ioaddr.device_addr); + ioread8(ap->ioaddr.status_addr); } static struct ata_port_operations ht6560a_port_ops = { @@ -351,14 +353,14 @@ static struct ata_port_operations ht6560a_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, /* Check vlb/noirq */ + .data_xfer = ata_data_xfer, /* Check vlb/noirq */ .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -387,7 +389,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) inb(0x3E6); inb(0x3E6); - outb(recover << 4 | active, ap->ioaddr.device_addr); + iowrite8(recover << 4 | active, ap->ioaddr.device_addr); if (adev->class != ATA_DEV_ATA) { u8 rconf = inb(0x3E6); @@ -396,7 +398,7 @@ static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev) outb(rconf, 0x3E6); } } - inb(ap->ioaddr.status_addr); + ioread8(ap->ioaddr.status_addr); } static struct ata_port_operations ht6560b_port_ops = { @@ -414,14 +416,14 @@ static struct ata_port_operations ht6560b_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, /* FIXME: Check 32bit and noirq */ + .data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */ .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -464,12 +466,12 @@ static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev u8 rc; /* Enter configuration mode */ - inw(ap->ioaddr.error_addr); - inw(ap->ioaddr.error_addr); - outb(3, ap->ioaddr.nsect_addr); + ioread16(ap->ioaddr.error_addr); + ioread16(ap->ioaddr.error_addr); + iowrite8(3, ap->ioaddr.nsect_addr); /* Read VLB clock strapping */ - clock = 1000000000 / khz[inb(ap->ioaddr.lbah_addr) & 0x03]; + clock = 1000000000 / khz[ioread8(ap->ioaddr.lbah_addr) & 0x03]; /* Get the timing data in cycles */ ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000); @@ -487,33 +489,33 @@ static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev setup = FIT(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ - rc = inb(ap->ioaddr.lbal_addr); + rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x7F; rc |= (adev->devno << 7); - outb(rc, ap->ioaddr.lbal_addr); + iowrite8(rc, ap->ioaddr.lbal_addr); /* Write the timings */ - outb(active << 4 | recover, ap->ioaddr.error_addr); + iowrite8(active << 4 | recover, ap->ioaddr.error_addr); /* Select the right bank for read timings, also load the shared timings for address */ - rc = inb(ap->ioaddr.device_addr); + rc = ioread8(ap->ioaddr.device_addr); rc &= 0xC0; rc |= adev->devno; /* Index select */ rc |= (setup << 4) | 0x04; - outb(rc, ap->ioaddr.device_addr); + iowrite8(rc, ap->ioaddr.device_addr); /* Load the read timings */ - outb(active << 4 | recover, ap->ioaddr.data_addr); + iowrite8(active << 4 | recover, ap->ioaddr.data_addr); /* Ensure the timing register mode is right */ - rc = inb (ap->ioaddr.lbal_addr); + rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x73; rc |= 0x84; - outb(rc, ap->ioaddr.lbal_addr); + iowrite8(rc, ap->ioaddr.lbal_addr); /* Exit command mode */ - outb(0x83, ap->ioaddr.nsect_addr); + iowrite8(0x83, ap->ioaddr.nsect_addr); } @@ -532,14 +534,14 @@ static struct ata_port_operations opti82c611a_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; /* @@ -563,9 +565,9 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */ /* Enter configuration mode */ - inw(ap->ioaddr.error_addr); - inw(ap->ioaddr.error_addr); - outb(3, ap->ioaddr.nsect_addr); + ioread16(ap->ioaddr.error_addr); + ioread16(ap->ioaddr.error_addr); + iowrite8(3, ap->ioaddr.nsect_addr); /* Read VLB clock strapping */ clock = 1000000000 / khz[sysclk]; @@ -586,33 +588,33 @@ static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev) setup = FIT(t.setup, 1, 4) - 1; /* Select the right timing bank for write timing */ - rc = inb(ap->ioaddr.lbal_addr); + rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x7F; rc |= (adev->devno << 7); - outb(rc, ap->ioaddr.lbal_addr); + iowrite8(rc, ap->ioaddr.lbal_addr); /* Write the timings */ - outb(active << 4 | recover, ap->ioaddr.error_addr); + iowrite8(active << 4 | recover, ap->ioaddr.error_addr); /* Select the right bank for read timings, also load the shared timings for address */ - rc = inb(ap->ioaddr.device_addr); + rc = ioread8(ap->ioaddr.device_addr); rc &= 0xC0; rc |= adev->devno; /* Index select */ rc |= (setup << 4) | 0x04; - outb(rc, ap->ioaddr.device_addr); + iowrite8(rc, ap->ioaddr.device_addr); /* Load the read timings */ - outb(active << 4 | recover, ap->ioaddr.data_addr); + iowrite8(active << 4 | recover, ap->ioaddr.data_addr); /* Ensure the timing register mode is right */ - rc = inb (ap->ioaddr.lbal_addr); + rc = ioread8(ap->ioaddr.lbal_addr); rc &= 0x73; rc |= 0x84; - outb(rc, ap->ioaddr.lbal_addr); + iowrite8(rc, ap->ioaddr.lbal_addr); /* Exit command mode */ - outb(0x83, ap->ioaddr.nsect_addr); + iowrite8(0x83, ap->ioaddr.nsect_addr); /* We need to know this for quad device on the MVB */ ap->host->private_data = ap; @@ -662,14 +664,14 @@ static struct ata_port_operations opti82c46x_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = opti82c46x_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; @@ -689,21 +691,26 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl struct legacy_data *ld = &legacy_data[nr_legacy_host]; struct ata_probe_ent ae; struct platform_device *pdev; - int ret = -EBUSY; struct ata_port_operations *ops = &legacy_port_ops; + void __iomem *io_addr, *ctrl_addr; int pio_modes = pio_mask; u32 mask = (1 << port); - - if (request_region(io, 8, "pata_legacy") == NULL) - return -EBUSY; - if (request_region(ctrl, 1, "pata_legacy") == NULL) - goto fail_io; + int ret; pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0); - if (IS_ERR(pdev)) { - ret = PTR_ERR(pdev); - goto fail_dev; - } + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + ret = -EBUSY; + if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL || + devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL) + goto fail; + + ret = -ENOMEM; + io_addr = devm_ioport_map(&pdev->dev, io, 8); + ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1); + if (!io_addr || !ctrl_addr) + goto fail; if (ht6560a & mask) { ops = &ht6560a_port_ops; @@ -770,27 +777,22 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl ae.irq = irq; ae.irq_flags = 0; ae.port_flags = ATA_FLAG_SLAVE_POSS|ATA_FLAG_SRST; - ae.port[0].cmd_addr = io; - ae.port[0].altstatus_addr = ctrl; - ae.port[0].ctl_addr = ctrl; + ae.port[0].cmd_addr = io_addr; + ae.port[0].altstatus_addr = ctrl_addr; + ae.port[0].ctl_addr = ctrl_addr; ata_std_ports(&ae.port[0]); ae.private_data = ld; - ret = ata_device_add(&ae); - if (ret == 0) { - ret = -ENODEV; + ret = -ENODEV; + if (!ata_device_add(&ae)) goto fail; - } + legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev); ld->platform_dev = pdev; return 0; fail: platform_device_unregister(pdev); -fail_dev: - release_region(ctrl, 1); -fail_io: - release_region(io, 8); return ret; } @@ -923,15 +925,11 @@ static __exit void legacy_exit(void) for (i = 0; i < nr_legacy_host; i++) { struct legacy_data *ld = &legacy_data[i]; - struct ata_port *ap =legacy_host[i]->ports[0]; - unsigned long io = ap->ioaddr.cmd_addr; - unsigned long ctrl = ap->ioaddr.ctl_addr; - ata_host_remove(legacy_host[i]); + + ata_host_detach(legacy_host[i]); platform_device_unregister(ld->platform_dev); if (ld->timing) release_region(ld->timing, 2); - release_region(io, 8); - release_region(ctrl, 1); } } |