diff options
Diffstat (limited to 'drivers/ata/pata_optidma.c')
| -rw-r--r-- | drivers/ata/pata_optidma.c | 32 |
1 files changed, 16 insertions, 16 deletions
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 74d2e7a28da..067fca1fa8a 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c @@ -91,12 +91,12 @@ static void optidma_error_handler(struct ata_port *ap) static void optidma_unlock(struct ata_port *ap) { - unsigned long regio = ap->ioaddr.cmd_addr; + void __iomem *regio = ap->ioaddr.cmd_addr; /* These 3 unlock the control register access */ - inw(regio + 1); - inw(regio + 1); - outb(3, regio + 2); + ioread16(regio + 1); + ioread16(regio + 1); + iowrite8(3, regio + 2); } /** @@ -108,10 +108,10 @@ static void optidma_unlock(struct ata_port *ap) static void optidma_lock(struct ata_port *ap) { - unsigned long regio = ap->ioaddr.cmd_addr; + void __iomem *regio = ap->ioaddr.cmd_addr; /* Relock */ - outb(0x83, regio + 2); + iowrite8(0x83, regio + 2); } /** @@ -133,7 +133,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo struct ata_device *pair = ata_dev_pair(adev); int pio = adev->pio_mode - XFER_PIO_0; int dma = adev->dma_mode - XFER_MW_DMA_0; - unsigned long regio = ap->ioaddr.cmd_addr; + void __iomem *regio = ap->ioaddr.cmd_addr; u8 addr; /* Address table precomputed with a DCLK of 2 */ @@ -178,20 +178,20 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo /* Commence primary programming sequence */ /* First we load the device number into the timing select */ - outb(adev->devno, regio + MISC_REG); + iowrite8(adev->devno, regio + MISC_REG); /* Now we load the data timings into read data/write data */ if (mode < XFER_MW_DMA_0) { - outb(data_rec_timing[pci_clock][pio], regio + READ_REG); - outb(data_rec_timing[pci_clock][pio], regio + WRITE_REG); + iowrite8(data_rec_timing[pci_clock][pio], regio + READ_REG); + iowrite8(data_rec_timing[pci_clock][pio], regio + WRITE_REG); } else if (mode < XFER_UDMA_0) { - outb(dma_data_rec_timing[pci_clock][dma], regio + READ_REG); - outb(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG); + iowrite8(dma_data_rec_timing[pci_clock][dma], regio + READ_REG); + iowrite8(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG); } /* Finally we load the address setup into the misc register */ - outb(addr | adev->devno, regio + MISC_REG); + iowrite8(addr | adev->devno, regio + MISC_REG); /* Programming sequence complete, timing 0 dev 0, timing 1 dev 1 */ - outb(0x85, regio + CNTRL_REG); + iowrite8(0x85, regio + CNTRL_REG); /* Switch back to IDE mode */ optidma_lock(ap); @@ -389,7 +389,7 @@ static struct ata_port_operations optidma_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, @@ -422,7 +422,7 @@ static struct ata_port_operations optiplus_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, |