summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_pcmcia.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_pcmcia.c')
-rw-r--r--drivers/ata/pata_pcmcia.c36
1 files changed, 34 insertions, 2 deletions
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 64b2e2281ee..f4d009ed50a 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
#define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.5"
/*
* Private data structure to glue stuff together
@@ -126,6 +126,37 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
return buflen;
}
+/**
+ * pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers
+ * @qc: command
+ *
+ * Drain the FIFO and device of any stuck data following a command
+ * failing to complete. In some cases this is neccessary before a
+ * reset will recover the device.
+ *
+ */
+
+void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
+{
+ int count;
+ struct ata_port *ap;
+
+ /* We only need to flush incoming data when a command was running */
+ if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
+ return;
+
+ ap = qc->ap;
+
+ /* Drain up to 64K of data before we give up this recovery method */
+ for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
+ && count++ < 65536;)
+ ioread8(ap->ioaddr.data_addr);
+
+ if (count)
+ ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n",
+ count);
+
+}
static struct scsi_host_template pcmcia_sht = {
ATA_PIO_SHT(DRV_NAME),
@@ -143,6 +174,7 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
.sff_data_xfer = ata_data_xfer_8bit,
.cable_detect = ata_cable_40wire,
.set_mode = pcmcia_set_mode_8bit,
+ .drain_fifo = pcmcia_8bit_drain_fifo,
};
#define CS_CHECK(fn, ret) \
@@ -299,7 +331,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
ap = host->ports[p];
ap->ops = ops;
- ap->pio_mask = 1; /* ISA so PIO 0 cycles */
+ ap->pio_mask = ATA_PIO0; /* ISA so PIO 0 cycles */
ap->flags |= ATA_FLAG_SLAVE_POSS;
ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;