summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_pdc2027x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_pdc2027x.c')
-rw-r--r--drivers/ata/pata_pdc2027x.c158
1 files changed, 85 insertions, 73 deletions
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 93bcdadb7be..a61cbc11068 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -35,7 +35,7 @@
#include <linux/libata.h>
#define DRV_NAME "pata_pdc2027x"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "0.9"
#undef PDC_DEBUG
#ifdef PDC_DEBUG
@@ -66,8 +66,10 @@ static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *e
static void pdc2027x_error_handler(struct ata_port *ap);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
-static void pdc2027x_post_set_mode(struct ata_port *ap);
static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
+static int pdc2027x_cable_detect(struct ata_port *ap);
+static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed);
/*
* ATA Timing Tables based on 133MHz controller clock.
@@ -146,6 +148,7 @@ static struct scsi_host_template pdc2027x_sht = {
static struct ata_port_operations pdc2027x_pata100_ops = {
.port_disable = ata_port_disable,
+ .mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -166,8 +169,8 @@ static struct ata_port_operations pdc2027x_pata100_ops = {
.thaw = ata_bmdma_thaw,
.error_handler = pdc2027x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = pdc2027x_cable_detect,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -179,7 +182,8 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
.port_disable = ata_port_disable,
.set_piomode = pdc2027x_set_piomode,
.set_dmamode = pdc2027x_set_dmamode,
- .post_set_mode = pdc2027x_post_set_mode,
+ .set_mode = pdc2027x_set_mode,
+ .mode_filter = pdc2027x_mode_filter,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
@@ -200,8 +204,8 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
.thaw = ata_bmdma_thaw,
.error_handler = pdc2027x_error_handler,
.post_internal_cmd = ata_bmdma_post_internal_cmd,
+ .cable_detect = pdc2027x_cable_detect,
- .irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
@@ -212,7 +216,6 @@ static struct ata_port_operations pdc2027x_pata133_ops = {
static struct ata_port_info pdc2027x_port_info[] = {
/* PDC_UDMA_100 */
{
- .sht = &pdc2027x_sht,
.flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
@@ -222,7 +225,6 @@ static struct ata_port_info pdc2027x_port_info[] = {
},
/* PDC_UDMA_133 */
{
- .sht = &pdc2027x_sht,
.flags = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
ATA_FLAG_MMIO,
.pio_mask = 0x1f, /* pio0-4 */
@@ -261,7 +263,7 @@ static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *ade
}
/**
- * pdc2027x_pata_cbl_detect - Probe host controller cable detect info
+ * pdc2027x_pata_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
*
* Read 80c cable indicator from Promise extended register.
@@ -270,7 +272,7 @@ static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *ade
* LOCKING:
* None (inherited from caller).
*/
-static void pdc2027x_cbl_detect(struct ata_port *ap)
+static int pdc2027x_cable_detect(struct ata_port *ap)
{
u32 cgcr;
@@ -281,13 +283,10 @@ static void pdc2027x_cbl_detect(struct ata_port *ap)
PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no);
- ap->cbl = ATA_CBL_PATA80;
- return;
-
+ return ATA_CBL_PATA80;
cbl40:
printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no);
- ap->cbl = ATA_CBL_PATA40;
- ap->udma_mask &= ATA_UDMA_MASK_40C;
+ return ATA_CBL_PATA40;
}
/**
@@ -314,7 +313,6 @@ static int pdc2027x_prereset(struct ata_port *ap)
/* Check whether port enabled */
if (!pdc2027x_port_enabled(ap))
return -ENOENT;
- pdc2027x_cbl_detect(ap);
return ata_std_prereset(ap);
}
@@ -334,6 +332,32 @@ static void pdc2027x_error_handler(struct ata_port *ap)
}
/**
+ * pdc2720x_mode_filter - mode selection filter
+ * @adev: ATA device
+ * @mask: list of modes proposed
+ *
+ * Block UDMA on devices that cause trouble with this controller.
+ */
+
+static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+ unsigned char model_num[ATA_ID_PROD_LEN + 1];
+ struct ata_device *pair = ata_dev_pair(adev);
+
+ if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
+ return ata_pci_default_filter(adev, mask);
+
+ /* Check for slave of a Maxtor at UDMA6 */
+ ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
+ ATA_ID_PROD_LEN + 1);
+ /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
+ if(strstr(model_num, "Maxtor") == 0 && pair->dma_mode == XFER_UDMA_6)
+ mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
+
+ return ata_pci_default_filter(adev, mask);
+}
+
+/**
* pdc2027x_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port to configure
* @adev: um
@@ -444,17 +468,22 @@ static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
}
/**
- * pdc2027x_post_set_mode - Set the timing registers back to correct values.
+ * pdc2027x_set_mode - Set the timing registers back to correct values.
* @ap: Port to configure
+ * @r_failed: Returned device for failure
*
* The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
* automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
* This function overwrites the possibly incorrect values set by the hardware to be correct.
*/
-static void pdc2027x_post_set_mode(struct ata_port *ap)
+static int pdc2027x_set_mode(struct ata_port *ap, struct ata_device **r_failed)
{
int i;
+ i = ata_do_set_mode(ap, r_failed);
+ if (i < 0)
+ return i;
+
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
@@ -476,6 +505,7 @@ static void pdc2027x_post_set_mode(struct ata_port *ap)
}
}
}
+ return 0;
}
/**
@@ -521,12 +551,12 @@ static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc)
/**
* pdc_read_counter - Read the ctr counter
- * @probe_ent: for the port address
+ * @host: target ATA host
*/
-static long pdc_read_counter(struct ata_probe_ent *probe_ent)
+static long pdc_read_counter(struct ata_host *host)
{
- void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+ void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
long counter;
int retry = 1;
u32 bccrl, bccrh, bccrlv, bccrhv;
@@ -564,12 +594,12 @@ retry:
* adjust_pll - Adjust the PLL input clock in Hz.
*
* @pdc_controller: controller specific information
- * @probe_ent: For the port address
+ * @host: target ATA host
* @pll_clock: The input of PLL in HZ
*/
-static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsigned int board_idx)
+static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx)
{
- void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+ void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
u16 pll_ctl;
long pll_clock_khz = pll_clock / 1000;
long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;
@@ -649,19 +679,19 @@ static void pdc_adjust_pll(struct ata_probe_ent *probe_ent, long pll_clock, unsi
/**
* detect_pll_input_clock - Detect the PLL input clock in Hz.
- * @probe_ent: for the port address
+ * @host: target ATA host
* Ex. 16949000 on 33MHz PCI bus for pdc20275.
* Half of the PCI clock.
*/
-static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
+static long pdc_detect_pll_input_clock(struct ata_host *host)
{
- void __iomem *mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
+ void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
u32 scr;
long start_count, end_count;
long pll_clock;
/* Read current counter value */
- start_count = pdc_read_counter(probe_ent);
+ start_count = pdc_read_counter(host);
/* Start the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
@@ -673,7 +703,7 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
mdelay(100);
/* Read the counter values again */
- end_count = pdc_read_counter(probe_ent);
+ end_count = pdc_read_counter(host);
/* Stop the test mode */
scr = readl(mmio_base + PDC_SYS_CTL);
@@ -692,11 +722,10 @@ static long pdc_detect_pll_input_clock(struct ata_probe_ent *probe_ent)
/**
* pdc_hardware_init - Initialize the hardware.
- * @pdev: instance of pci_dev found
- * @pdc_controller: controller specific information
- * @pe: for the port address
+ * @host: target ATA host
+ * @board_idx: board identifier
*/
-static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, unsigned int board_idx)
+static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
{
long pll_clock;
@@ -706,15 +735,15 @@ static int pdc_hardware_init(struct pci_dev *pdev, struct ata_probe_ent *pe, uns
* Ex. 25MHz or 40MHz, we have to adjust the cycle_time.
* The pdc20275 controller employs PLL circuit to help correct timing registers setting.
*/
- pll_clock = pdc_detect_pll_input_clock(pe);
+ pll_clock = pdc_detect_pll_input_clock(host);
if (pll_clock < 0) /* counter overflow? Try again. */
- pll_clock = pdc_detect_pll_input_clock(pe);
+ pll_clock = pdc_detect_pll_input_clock(host);
- dev_printk(KERN_INFO, &pdev->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
+ dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
/* Adjust PLL control register */
- pdc_adjust_pll(pe, pll_clock, board_idx);
+ pdc_adjust_pll(host, pll_clock, board_idx);
return 0;
}
@@ -746,8 +775,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
* Called when an instance of PCI adapter is inserted.
* This function checks whether the hardware is supported,
* initialize hardware and register an instance of ata_host to
- * libata by providing struct ata_probe_ent and ata_device_add().
- * (implements struct pci_driver.probe() )
+ * libata. (implements struct pci_driver.probe() )
*
* @pdev: instance of pci_dev found
* @ent: matching entry in the id_tbl[]
@@ -756,14 +784,21 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
{
static int printed_version;
unsigned int board_idx = (unsigned int) ent->driver_data;
-
- struct ata_probe_ent *probe_ent;
+ const struct ata_port_info *ppi[] =
+ { &pdc2027x_port_info[board_idx], NULL };
+ struct ata_host *host;
void __iomem *mmio_base;
int rc;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+ /* alloc host */
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+ if (!host)
+ return -ENOMEM;
+
+ /* acquire resources and fill host */
rc = pcim_enable_device(pdev);
if (rc)
return rc;
@@ -771,6 +806,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
if (rc)
return rc;
+ host->iomap = pcim_iomap_table(pdev);
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
if (rc)
@@ -780,46 +816,22 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
if (rc)
return rc;
- /* Prepare the probe entry */
- probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
- if (probe_ent == NULL)
- return -ENOMEM;
-
- probe_ent->dev = pci_dev_to_dev(pdev);
- INIT_LIST_HEAD(&probe_ent->node);
-
- probe_ent->sht = pdc2027x_port_info[board_idx].sht;
- probe_ent->port_flags = pdc2027x_port_info[board_idx].flags;
- probe_ent->pio_mask = pdc2027x_port_info[board_idx].pio_mask;
- probe_ent->mwdma_mask = pdc2027x_port_info[board_idx].mwdma_mask;
- probe_ent->udma_mask = pdc2027x_port_info[board_idx].udma_mask;
- probe_ent->port_ops = pdc2027x_port_info[board_idx].port_ops;
+ mmio_base = host->iomap[PDC_MMIO_BAR];
- probe_ent->irq = pdev->irq;
- probe_ent->irq_flags = IRQF_SHARED;
- probe_ent->iomap = pcim_iomap_table(pdev);
+ pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0);
+ host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000;
+ pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0);
+ host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008;
- mmio_base = probe_ent->iomap[PDC_MMIO_BAR];
-
- pdc_ata_setup_port(&probe_ent->port[0], mmio_base + 0x17c0);
- probe_ent->port[0].bmdma_addr = mmio_base + 0x1000;
- pdc_ata_setup_port(&probe_ent->port[1], mmio_base + 0x15c0);
- probe_ent->port[1].bmdma_addr = mmio_base + 0x1008;
-
- probe_ent->n_ports = 2;
-
- pci_set_master(pdev);
//pci_enable_intx(pdev);
/* initialize adapter */
- if (pdc_hardware_init(pdev, probe_ent, board_idx) != 0)
+ if (pdc_hardware_init(host, board_idx) != 0)
return -EIO;
- if (!ata_device_add(probe_ent))
- return -ENODEV;
-
- devm_kfree(&pdev->dev, probe_ent);
- return 0;
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+ &pdc2027x_sht);
}
/**
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-20 19:15:57 +0000