diff options
Diffstat (limited to 'drivers/ata/pata_pdc202xx_old.c')
| -rw-r--r-- | drivers/ata/pata_pdc202xx_old.c | 71 |
1 files changed, 27 insertions, 44 deletions
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 6dd63413a52..ee636beb05e 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c @@ -2,13 +2,14 @@ * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer * (C) 2005 Red Hat Inc * Alan Cox <alan@redhat.com> + * (C) 2007 Bartlomiej Zolnierkiewicz * * Based in part on linux/drivers/ide/pci/pdc202xx_old.c * * First cut with LBA48/ATAPI * * TODO: - * Channel interlock/reset on both required ? + * Channel interlock/reset on both required */ #include <linux/kernel.h> @@ -21,45 +22,17 @@ #include <linux/libata.h> #define DRV_NAME "pata_pdc202xx_old" -#define DRV_VERSION "0.2.3" +#define DRV_VERSION "0.4.2" -/** - * pdc2024x_pre_reset - probe begin - * @ap: ATA port - * - * Set up cable type and use generic probe init - */ - -static int pdc2024x_pre_reset(struct ata_port *ap) -{ - ap->cbl = ATA_CBL_PATA40; - return ata_std_prereset(ap); -} - - -static void pdc2024x_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, pdc2024x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); -} - - -static int pdc2026x_pre_reset(struct ata_port *ap) +static int pdc2026x_cable_detect(struct ata_port *ap) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); u16 cis; pci_read_config_word(pdev, 0x50, &cis); if (cis & (1 << (10 + ap->port_no))) - ap->cbl = ATA_CBL_PATA80; - else - ap->cbl = ATA_CBL_PATA40; - - return ata_std_prereset(ap); -} - -static void pdc2026x_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, pdc2026x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; } /** @@ -76,7 +49,7 @@ static void pdc2026x_error_handler(struct ata_port *ap) static void pdc202xx_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int port = 0x60 + 4 * ap->port_no + 2 * adev->devno; + int port = 0x60 + 8 * ap->port_no + 4 * adev->devno; static u16 pio_timing[5] = { 0x0913, 0x050C , 0x0308, 0x0206, 0x0104 }; @@ -85,7 +58,7 @@ static void pdc202xx_configure_piomode(struct ata_port *ap, struct ata_device *a pci_read_config_byte(pdev, port, &r_ap); pci_read_config_byte(pdev, port + 1, &r_bp); r_ap &= ~0x3F; /* Preserve ERRDY_EN, SYNC_IN */ - r_bp &= ~0x07; + r_bp &= ~0x1F; r_ap |= (pio_timing[pio] >> 8); r_bp |= (pio_timing[pio] & 0xFF); @@ -123,7 +96,7 @@ static void pdc202xx_set_piomode(struct ata_port *ap, struct ata_device *adev) static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); - int port = 0x60 + 4 * ap->port_no + 2 * adev->devno; + int port = 0x60 + 8 * ap->port_no + 4 * adev->devno; static u8 udma_timing[6][2] = { { 0x60, 0x03 }, /* 33 Mhz Clock */ { 0x40, 0x02 }, @@ -132,12 +105,17 @@ static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev) { 0x20, 0x01 }, { 0x20, 0x01 } }; + static u8 mdma_timing[3][2] = { + { 0x60, 0x03 }, + { 0x60, 0x04 }, + { 0xe0, 0x0f }, + }; u8 r_bp, r_cp; pci_read_config_byte(pdev, port + 1, &r_bp); pci_read_config_byte(pdev, port + 2, &r_cp); - r_bp &= ~0xF0; + r_bp &= ~0xE0; r_cp &= ~0x0F; if (adev->dma_mode >= XFER_UDMA_0) { @@ -147,8 +125,8 @@ static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev) } else { int speed = adev->dma_mode - XFER_MW_DMA_0; - r_bp |= 0x60; - r_cp |= (5 - speed); + r_bp |= mdma_timing[speed][0]; + r_cp |= mdma_timing[speed][1]; } pci_write_config_byte(pdev, port + 1, r_bp); pci_write_config_byte(pdev, port + 2, r_cp); @@ -189,7 +167,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc) /* Cases the state machine will not complete correctly without help */ if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA) { - len = qc->nbytes; + len = qc->nbytes / 2; if (tf->flags & ATA_TFLAG_WRITE) len |= 0x06000000; @@ -238,7 +216,6 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) /** * pdc2026x_dev_config - device setup hook - * @ap: ATA port * @adev: newly found device * * Perform chip specific early setup. We need to lock the transfer @@ -246,7 +223,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc) * barf. */ -static void pdc2026x_dev_config(struct ata_port *ap, struct ata_device *adev) +static void pdc2026x_dev_config(struct ata_device *adev) { adev->max_sectors = 256; } @@ -267,8 +244,10 @@ static struct scsi_host_template pdc202xx_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, +#ifdef CONFIG_PM .resume = ata_scsi_device_resume, .suspend = ata_scsi_device_suspend, +#endif }; static struct ata_port_operations pdc2024x_port_ops = { @@ -284,8 +263,9 @@ static struct ata_port_operations pdc2024x_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = pdc2024x_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -318,8 +298,9 @@ static struct ata_port_operations pdc2026x_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = pdc2026x_error_handler, + .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = pdc2026x_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = pdc2026x_bmdma_start, @@ -399,8 +380,10 @@ static struct pci_driver pdc202xx_pci_driver = { .id_table = pdc202xx, .probe = pdc202xx_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = ata_pci_device_resume, +#endif }; static int __init pdc202xx_init(void) |