summaryrefslogtreecommitdiffstats
path: root/drivers/ata/pata_scc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_scc.c')
-rw-r--r--drivers/ata/pata_scc.c80
1 files changed, 20 insertions, 60 deletions
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 4257d6b40af..6f6193b707c 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -265,7 +265,7 @@ unsigned long scc_mode_filter(struct ata_device *adev, unsigned long mask)
printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
mask &= ~(0xE0 << ATA_SHIFT_UDMA);
}
- return ata_bmdma_mode_filter(adev, mask);
+ return mask;
}
/**
@@ -416,6 +416,17 @@ static void scc_dev_select (struct ata_port *ap, unsigned int device)
}
/**
+ * scc_set_devctl - Write device control reg
+ * @ap: port where the device is
+ * @ctl: value to write
+ */
+
+static void scc_set_devctl(struct ata_port *ap, u8 ctl)
+{
+ out_be32(ap->ioaddr.ctl_addr, ctl);
+}
+
+/**
* scc_bmdma_setup - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
@@ -430,7 +441,7 @@ static void scc_bmdma_setup (struct ata_queued_cmd *qc)
void __iomem *mmio = ap->ioaddr.bmdma_addr;
/* load PRD table addr */
- out_be32(mmio + SCC_DMA_TABLE_OFS, ap->prd_dma);
+ out_be32(mmio + SCC_DMA_TABLE_OFS, ap->bmdma_prd_dma);
/* specify data direction, triple-check start bit is clear */
dmactl = in_be32(mmio + SCC_DMA_CMD);
@@ -501,8 +512,8 @@ static unsigned int scc_devchk (struct ata_port *ap,
* Note: Original code is ata_sff_wait_after_reset
*/
-int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
- unsigned long deadline)
+static int scc_wait_after_reset(struct ata_link *link, unsigned int devmask,
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -817,54 +828,6 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
}
/**
- * scc_irq_on - Enable interrupts on a port.
- * @ap: Port on which interrupts are enabled.
- *
- * Note: Original code is ata_sff_irq_on().
- */
-
-static u8 scc_irq_on (struct ata_port *ap)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
- u8 tmp;
-
- ap->ctl &= ~ATA_NIEN;
- ap->last_ctl = ap->ctl;
-
- out_be32(ioaddr->ctl_addr, ap->ctl);
- tmp = ata_wait_idle(ap);
-
- ap->ops->sff_irq_clear(ap);
-
- return tmp;
-}
-
-/**
- * scc_freeze - Freeze BMDMA controller port
- * @ap: port to freeze
- *
- * Note: Original code is ata_sff_freeze().
- */
-
-static void scc_freeze (struct ata_port *ap)
-{
- struct ata_ioports *ioaddr = &ap->ioaddr;
-
- ap->ctl |= ATA_NIEN;
- ap->last_ctl = ap->ctl;
-
- out_be32(ioaddr->ctl_addr, ap->ctl);
-
- /* Under certain circumstances, some controllers raise IRQ on
- * ATA_NIEN manipulation. Also, many controllers fail to mask
- * previously pending IRQ on ATA_NIEN assertion. Clear it.
- */
- ap->ops->sff_check_status(ap);
-
- ap->ops->sff_irq_clear(ap);
-}
-
-/**
* scc_pata_prereset - prepare for reset
* @ap: ATA port to be reset
* @deadline: deadline jiffies for the operation
@@ -903,8 +866,7 @@ static void scc_postreset(struct ata_link *link, unsigned int *classes)
}
/* set up device control */
- if (ap->ioaddr.ctl_addr)
- out_be32(ap->ioaddr.ctl_addr, ap->ctl);
+ out_be32(ap->ioaddr.ctl_addr, ap->ctl);
DPRINTK("EXIT\n");
}
@@ -930,7 +892,7 @@ static void scc_irq_clear (struct ata_port *ap)
* scc_port_start - Set port up for dma.
* @ap: Port to initialize
*
- * Allocate space for PRD table using ata_port_start().
+ * Allocate space for PRD table using ata_bmdma_port_start().
* Set PRD table address for PTERADD. (PRD Transfer End Read)
*/
@@ -939,11 +901,11 @@ static int scc_port_start (struct ata_port *ap)
void __iomem *mmio = ap->ioaddr.bmdma_addr;
int rc;
- rc = ata_port_start(ap);
+ rc = ata_bmdma_port_start(ap);
if (rc)
return rc;
- out_be32(mmio + SCC_DMA_PTERADD, ap->prd_dma);
+ out_be32(mmio + SCC_DMA_PTERADD, ap->bmdma_prd_dma);
return 0;
}
@@ -978,6 +940,7 @@ static struct ata_port_operations scc_pata_ops = {
.sff_check_status = scc_check_status,
.sff_check_altstatus = scc_check_altstatus,
.sff_dev_select = scc_dev_select,
+ .sff_set_devctl = scc_set_devctl,
.bmdma_setup = scc_bmdma_setup,
.bmdma_start = scc_bmdma_start,
@@ -985,14 +948,11 @@ static struct ata_port_operations scc_pata_ops = {
.bmdma_status = scc_bmdma_status,
.sff_data_xfer = scc_data_xfer,
- .freeze = scc_freeze,
.prereset = scc_pata_prereset,
.softreset = scc_softreset,
.postreset = scc_postreset,
- .post_internal_cmd = scc_bmdma_stop,
.sff_irq_clear = scc_irq_clear,
- .sff_irq_on = scc_irq_on,
.port_start = scc_port_start,
.port_stop = scc_port_stop,