diff options
Diffstat (limited to 'drivers/ata/pata_sis.c')
-rw-r--r-- | drivers/ata/pata_sis.c | 57 |
1 files changed, 23 insertions, 34 deletions
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 9a829a7cbc6..3b5be77e861 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -2,6 +2,7 @@ * pata_sis.c - SiS ATA driver * * (C) 2005 Red Hat <alan@redhat.com> + * (C) 2007 Bartlomiej Zolnierkiewicz * * Based upon linux/drivers/ide/pci/sis5513.c * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org> @@ -35,7 +36,7 @@ #include "sis.h" #define DRV_NAME "pata_sis" -#define DRV_VERSION "0.5.1" +#define DRV_VERSION "0.5.2" struct sis_chipset { u16 device; /* PCI host ID */ @@ -53,6 +54,7 @@ struct sis_laptop { static const struct sis_laptop sis_laptop[] = { /* devid, subvendor, subdev */ { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ + { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ /* end marker */ { 0, } }; @@ -82,7 +84,7 @@ static int sis_short_ata40(struct pci_dev *dev) static int sis_old_port_base(struct ata_device *adev) { - return 0x40 + (4 * adev->ap->port_no) + (2 * adev->devno); + return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno); } /** @@ -131,19 +133,20 @@ static int sis_66_cable_detect(struct ata_port *ap) /** * sis_pre_reset - probe begin - * @ap: ATA port + * @link: ATA link * @deadline: deadline jiffies for the operation * * Set up cable type and use generic probe init */ -static int sis_pre_reset(struct ata_port *ap, unsigned long deadline) +static int sis_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits sis_enable_bits[] = { { 0x4aU, 1U, 0x02UL, 0x02UL }, /* port 0 */ { 0x4aU, 1U, 0x04UL, 0x04UL }, /* port 1 */ }; + struct ata_port *ap = link->ap; struct pci_dev *pdev = to_pci_dev(ap->host->dev); if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no])) @@ -152,7 +155,7 @@ static int sis_pre_reset(struct ata_port *ap, unsigned long deadline) /* Clear the FIFO settings. We can't enable the FIFO until we know we are poking at a disk */ pci_write_config_byte(pdev, 0x4B, 0); - return ata_std_prereset(ap, deadline); + return ata_std_prereset(link, deadline); } @@ -237,7 +240,7 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev) } /** - * sis_100_set_pioode - Initialize host controller PATA PIO timings + * sis_100_set_piomode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Device we are configuring for. * @@ -262,7 +265,7 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev) } /** - * sis_133_set_pioode - Initialize host controller PATA PIO timings + * sis_133_set_piomode - Initialize host controller PATA PIO timings * @ap: Port whose timings we are configuring * @adev: Device we are configuring for. * @@ -334,7 +337,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) int drive_pci = sis_old_port_base(adev); u16 timing; - const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; + const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 }; pci_read_config_word(pdev, drive_pci, &timing); @@ -342,15 +345,15 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev) if (adev->dma_mode < XFER_UDMA_0) { /* bits 3-0 hold recovery timing bits 8-10 active timing and the higer bits are dependant on the device */ - timing &= ~ 0x870F; + timing &= ~0x870F; timing |= mwdma_bits[speed]; - pci_write_config_word(pdev, drive_pci, timing); } else { /* Bit 15 is UDMA on/off, bit 13-14 are cycle time */ speed = adev->dma_mode - XFER_UDMA_0; timing &= ~0x6000; timing |= udma_bits[speed]; } + pci_write_config_word(pdev, drive_pci, timing); } /** @@ -373,8 +376,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) int drive_pci = sis_old_port_base(adev); u16 timing; - const u16 mwdma_bits[] = { 0x707, 0x202, 0x202 }; - const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; + /* MWDMA 0-2 and UDMA 0-5 */ + const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; + const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; pci_read_config_word(pdev, drive_pci, &timing); @@ -432,8 +436,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev) * @adev: Device to program * * Set UDMA/MWDMA mode for device, in host controller PCI config space. - * Handles early SiS 961 bridges. Supports MWDMA as well unlike - * the old ide/pci driver. + * Handles early SiS 961 bridges. * * LOCKING: * None (inherited from caller). @@ -467,8 +470,6 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a * @adev: Device to program * * Set UDMA/MWDMA mode for device, in host controller PCI config space. - * Handles early SiS 961 bridges. Supports MWDMA as well unlike - * the old ide/pci driver. * * LOCKING: * None (inherited from caller). @@ -530,7 +531,6 @@ static struct scsi_host_template sis_sht = { }; static const struct ata_port_operations sis_133_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_133_set_piomode, .set_dmamode = sis_133_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -558,13 +558,11 @@ static const struct ata_port_operations sis_133_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_133_for_sata_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_133_set_piomode, .set_dmamode = sis_133_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -592,13 +590,11 @@ static const struct ata_port_operations sis_133_for_sata_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_133_early_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_100_set_piomode, .set_dmamode = sis_133_early_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -626,13 +622,11 @@ static const struct ata_port_operations sis_133_early_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_100_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_100_set_piomode, .set_dmamode = sis_100_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -660,13 +654,11 @@ static const struct ata_port_operations sis_100_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_66_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_old_set_piomode, .set_dmamode = sis_66_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -694,13 +686,11 @@ static const struct ata_port_operations sis_66_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_operations sis_old_ops = { - .port_disable = ata_port_disable, .set_piomode = sis_old_set_piomode, .set_dmamode = sis_old_set_dmamode, .mode_filter = ata_pci_default_filter, @@ -728,9 +718,8 @@ static const struct ata_port_operations sis_old_ops = { .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, - .irq_ack = ata_irq_ack, - .port_start = ata_port_start, + .port_start = ata_sff_port_start, }; static const struct ata_port_info sis_info = { |