diff options
Diffstat (limited to 'drivers/ata/pata_sl82c105.c')
| -rw-r--r-- | drivers/ata/pata_sl82c105.c | 67 |
1 files changed, 13 insertions, 54 deletions
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 81ef207f826..70d94fb28a5 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -60,13 +60,7 @@ static int sl82c105_pre_reset(struct ata_link *link, unsigned long deadline) if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) return -ENOENT; - return ata_std_prereset(link, deadline); -} - - -static void sl82c105_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, sl82c105_pre_reset, ata_std_softreset, NULL, ata_std_postreset); + return ata_sff_prereset(link, deadline); } @@ -235,55 +229,17 @@ static int sl82c105_qc_defer(struct ata_queued_cmd *qc) } static struct scsi_host_template sl82c105_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, + ATA_BMDMA_SHT(DRV_NAME), }; static struct ata_port_operations sl82c105_port_ops = { - .set_piomode = sl82c105_set_piomode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = sl82c105_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .cable_detect = ata_cable_40wire, - - .bmdma_setup = ata_bmdma_setup, + .inherits = &ata_bmdma_port_ops, + .qc_defer = sl82c105_qc_defer, .bmdma_start = sl82c105_bmdma_start, .bmdma_stop = sl82c105_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_defer = sl82c105_qc_defer, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - - .port_start = ata_sff_port_start, + .cable_detect = ata_cable_40wire, + .set_piomode = sl82c105_set_piomode, + .prereset = sl82c105_pre_reset, }; /** @@ -327,14 +283,12 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev) static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) { static const struct ata_port_info info_dma = { - .sht = &sl82c105_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, .port_ops = &sl82c105_port_ops }; static const struct ata_port_info info_early = { - .sht = &sl82c105_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .port_ops = &sl82c105_port_ops @@ -344,6 +298,11 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id NULL }; u32 val; int rev; + int rc; + + rc = pcim_enable_device(dev); + if (rc) + return rc; rev = sl82c105_bridge_revision(dev); @@ -358,7 +317,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; pci_write_config_dword(dev, 0x40, val); - return ata_pci_init_one(dev, ppi); + return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL); } static const struct pci_device_id sl82c105[] = { |