diff options
Diffstat (limited to 'drivers/ata/sata_inic162x.c')
| -rw-r--r-- | drivers/ata/sata_inic162x.c | 781 |
1 files changed, 781 insertions, 0 deletions
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c new file mode 100644 index 00000000000..c5335f42280 --- /dev/null +++ b/drivers/ata/sata_inic162x.c @@ -0,0 +1,781 @@ +/* + * sata_inic162x.c - Driver for Initio 162x SATA controllers + * + * Copyright 2006 SUSE Linux Products GmbH + * Copyright 2006 Tejun Heo <teheo@novell.com> + * + * This file is released under GPL v2. + * + * This controller is eccentric and easily locks up if something isn't + * right. Documentation is available at initio's website but it only + * documents registers (not programming model). + * + * - ATA disks work. + * - Hotplug works. + * - ATAPI read works but burning doesn't. This thing is really + * peculiar about ATAPI and I couldn't figure out how ATAPI PIO and + * ATAPI DMA WRITE should be programmed. If you've got a clue, be + * my guest. + * - Both STR and STD work. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/blkdev.h> +#include <scsi/scsi_device.h> + +#define DRV_NAME "sata_inic162x" +#define DRV_VERSION "0.1" + +enum { + MMIO_BAR = 5, + + NR_PORTS = 2, + + HOST_CTL = 0x7c, + HOST_STAT = 0x7e, + HOST_IRQ_STAT = 0xbc, + HOST_IRQ_MASK = 0xbe, + + PORT_SIZE = 0x40, + + /* registers for ATA TF operation */ + PORT_TF = 0x00, + PORT_ALT_STAT = 0x08, + PORT_IRQ_STAT = 0x09, + PORT_IRQ_MASK = 0x0a, + PORT_PRD_CTL = 0x0b, + PORT_PRD_ADDR = 0x0c, + PORT_PRD_XFERLEN = 0x10, + + /* IDMA register */ + PORT_IDMA_CTL = 0x14, + + PORT_SCR = 0x20, + + /* HOST_CTL bits */ + HCTL_IRQOFF = (1 << 8), /* global IRQ off */ + HCTL_PWRDWN = (1 << 13), /* power down PHYs */ + HCTL_SOFTRST = (1 << 13), /* global reset (no phy reset) */ + HCTL_RPGSEL = (1 << 15), /* register page select */ + + HCTL_KNOWN_BITS = HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST | + HCTL_RPGSEL, + + /* HOST_IRQ_(STAT|MASK) bits */ + HIRQ_PORT0 = (1 << 0), + HIRQ_PORT1 = (1 << 1), + HIRQ_SOFT = (1 << 14), + HIRQ_GLOBAL = (1 << 15), /* STAT only */ + + /* PORT_IRQ_(STAT|MASK) bits */ + PIRQ_OFFLINE = (1 << 0), /* device unplugged */ + PIRQ_ONLINE = (1 << 1), /* device plugged */ + PIRQ_COMPLETE = (1 << 2), /* completion interrupt */ + PIRQ_FATAL = (1 << 3), /* fatal error */ + PIRQ_ATA = (1 << 4), /* ATA interrupt */ + PIRQ_REPLY = (1 << 5), /* reply FIFO not empty */ + PIRQ_PENDING = (1 << 7), /* port IRQ pending (STAT only) */ + + PIRQ_ERR = PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL, + + PIRQ_MASK_DMA_READ = PIRQ_REPLY | PIRQ_ATA, + PIRQ_MASK_OTHER = PIRQ_REPLY | PIRQ_COMPLETE, + PIRQ_MASK_FREEZE = 0xff, + + /* PORT_PRD_CTL bits */ + PRD_CTL_START = (1 << 0), + PRD_CTL_WR = (1 << 3), + PRD_CTL_DMAEN = (1 << 7), /* DMA enable */ + + /* PORT_IDMA_CTL bits */ + IDMA_CTL_RST_ATA = (1 << 2), /* hardreset ATA bus */ + IDMA_CTL_RST_IDMA = (1 << 5), /* reset IDMA machinary */ + IDMA_CTL_GO = (1 << 7), /* IDMA mode go */ + IDMA_CTL_ATA_NIEN = (1 << 8), /* ATA IRQ disable */ +}; + +struct inic_host_priv { + u16 cached_hctl; +}; + +struct inic_port_priv { + u8 dfl_prdctl; + u8 cached_prdctl; + u8 cached_pirq_mask; +}; + +static int inic_slave_config(struct scsi_device *sdev) +{ + /* This controller is braindamaged. dma_boundary is 0xffff + * like others but it will lock up the whole machine HARD if + * 65536 byte PRD entry is fed. Reduce maximum segment size. + */ + blk_queue_max_segment_size(sdev->request_queue, 65536 - 512); + + return ata_scsi_slave_config(sdev); +} + +static struct scsi_host_template inic_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = inic_slave_config, + .slave_destroy = ata_scsi_slave_destroy, + .bios_param = ata_std_bios_param, + .suspend = ata_scsi_device_suspend, + .resume = ata_scsi_device_resume, +}; + +static const int scr_map[] = { + [SCR_STATUS] = 0, + [SCR_ERROR] = 1, + [SCR_CONTROL] = 2, +}; + +static void __iomem * inic_port_base(struct ata_port *ap) +{ + return ap->host->iomap[MMIO_BAR] + ap->port_no * PORT_SIZE; +} + +static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask) +{ + void __iomem *port_base = inic_port_base(ap); + struct inic_port_priv *pp = ap->private_data; + + writeb(mask, port_base + PORT_IRQ_MASK); + pp->cached_pirq_mask = mask; +} + +static void inic_set_pirq_mask(struct ata_port *ap, u8 mask) +{ + struct inic_port_priv *pp = ap->private_data; + + if (pp->cached_pirq_mask != mask) + __inic_set_pirq_mask(ap, mask); +} + +static void inic_reset_port(void __iomem *port_base) +{ + void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; + u16 ctl; + + ctl = readw(idma_ctl); + ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO); + + /* mask IRQ and assert reset */ + writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl); + readw(idma_ctl); /* flush */ + + /* give it some time */ + msleep(1); + + /* release reset */ + writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl); + + /* clear irq */ + writeb(0xff, port_base + PORT_IRQ_STAT); + + /* reenable ATA IRQ, turn off IDMA mode */ + writew(ctl, idma_ctl); +} + +static u32 inic_scr_read(struct ata_port *ap, unsigned sc_reg) +{ + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; + void __iomem *addr; + u32 val; + + if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) + return 0xffffffffU; + + addr = scr_addr + scr_map[sc_reg] * 4; + val = readl(scr_addr + scr_map[sc_reg] * 4); + + /* this controller has stuck DIAG.N, ignore it */ + if (sc_reg == SCR_ERROR) + val &= ~SERR_PHYRDY_CHG; + return val; +} + +static void inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) +{ + void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr; + void __iomem *addr; + + if (unlikely(sc_reg >= ARRAY_SIZE(scr_map))) + return; + + addr = scr_addr + scr_map[sc_reg] * 4; + writel(val, scr_addr + scr_map[sc_reg] * 4); +} + +/* + * In TF mode, inic162x is very similar to SFF device. TF registers + * function the same. DMA engine behaves similary using the same PRD + * format as BMDMA but different command register, interrupt and event + * notification methods are used. The following inic_bmdma_*() + * functions do the impedance matching. + */ +static void inic_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct inic_port_priv *pp = ap->private_data; + void __iomem *port_base = inic_port_base(ap); + int rw = qc->tf.flags & ATA_TFLAG_WRITE; + + /* make sure device sees PRD table writes */ + wmb(); + + /* load transfer length */ + writel(qc->nbytes, port_base + PORT_PRD_XFERLEN); + + /* turn on DMA and specify data direction */ + pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN; + if (!rw) + pp->cached_prdctl |= PRD_CTL_WR; + writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL); + + /* issue r/w command */ + ap->ops->exec_command(ap, &qc->tf); +} + +static void inic_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct inic_port_priv *pp = ap->private_data; + void __iomem *port_base = inic_port_base(ap); + + /* start host DMA transaction */ + pp->cached_prdctl |= PRD_CTL_START; + writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL); +} + +static void inic_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct inic_port_priv *pp = ap->private_data; + void __iomem *port_base = inic_port_base(ap); + + /* stop DMA engine */ + writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL); +} + +static u8 inic_bmdma_status(struct ata_port *ap) +{ + /* event is already verified by the interrupt handler */ + return ATA_DMA_INTR; +} + +static void inic_irq_clear(struct ata_port *ap) +{ + /* noop */ +} + +static void inic_host_intr(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + struct ata_eh_info *ehi = &ap->eh_info; + u8 irq_stat; + + /* fetch and clear irq */ + irq_stat = readb(port_base + PORT_IRQ_STAT); + writeb(irq_stat, port_base + PORT_IRQ_STAT); + + if (likely(!(irq_stat & PIRQ_ERR))) { + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + + if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) { + ata_chk_status(ap); /* clear ATA interrupt */ + return; + } + + if (likely(ata_host_intr(ap, qc))) + return; + + ata_chk_status(ap); /* clear ATA interrupt */ + ata_port_printk(ap, KERN_WARNING, "unhandled " + "interrupt, irq_stat=%x\n", irq_stat); + return; + } + + /* error */ + ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat); + + if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) { + ata_ehi_hotplugged(ehi); + ata_port_freeze(ap); + } else + ata_port_abort(ap); +} + +static irqreturn_t inic_interrupt(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + void __iomem *mmio_base = host->iomap[MMIO_BAR]; + u16 host_irq_stat; + int i, handled = 0;; + + host_irq_stat = readw(mmio_base + HOST_IRQ_STAT); + + if (unlikely(!(host_irq_stat & HIRQ_GLOBAL))) + goto out; + + spin_lock(&host->lock); + + for (i = 0; i < NR_PORTS; i++) { + struct ata_port *ap = host->ports[i]; + + if (!(host_irq_stat & (HIRQ_PORT0 << i))) + continue; + + if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) { + inic_host_intr(ap); + handled++; + } else { + if (ata_ratelimit()) + dev_printk(KERN_ERR, host->dev, "interrupt " + "from disabled port %d (0x%x)\n", + i, host_irq_stat); + } + } + + spin_unlock(&host->lock); + + out: + return IRQ_RETVAL(handled); +} + +static unsigned int inic_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* ATA IRQ doesn't wait for DMA transfer completion and vice + * versa. Mask IRQ selectively to detect command completion. + * Without it, ATA DMA read command can cause data corruption. + * + * Something similar might be needed for ATAPI writes. I + * tried a lot of combinations but couldn't find the solution. + */ + if (qc->tf.protocol == ATA_PROT_DMA && + !(qc->tf.flags & ATA_TFLAG_WRITE)) + inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ); + else + inic_set_pirq_mask(ap, PIRQ_MASK_OTHER); + + /* Issuing a command to yet uninitialized port locks up the + * controller. Most of the time, this happens for the first + * command after reset which are ATA and ATAPI IDENTIFYs. + * Fast fail if stat is 0x7f or 0xff for those commands. + */ + if (unlikely(qc->tf.command == ATA_CMD_ID_ATA || + qc->tf.command == ATA_CMD_ID_ATAPI)) { + u8 stat = ata_chk_status(ap); + if (stat == 0x7f || stat == 0xff) + return AC_ERR_HSM; + } + + return ata_qc_issue_prot(qc); +} + +static void inic_freeze(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + __inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE); + + ata_chk_status(ap); + writeb(0xff, port_base + PORT_IRQ_STAT); + + readb(port_base + PORT_IRQ_STAT); /* flush */ +} + +static void inic_thaw(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + ata_chk_status(ap); + writeb(0xff, port_base + PORT_IRQ_STAT); + + __inic_set_pirq_mask(ap, PIRQ_MASK_OTHER); + + readb(port_base + PORT_IRQ_STAT); /* flush */ +} + +/* + * SRST and SControl hardreset don't give valid signature on this + * controller. Only controller specific hardreset mechanism works. + */ +static int inic_hardreset(struct ata_port *ap, unsigned int *class) +{ + void __iomem *port_base = inic_port_base(ap); + void __iomem *idma_ctl = port_base + PORT_IDMA_CTL; + const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context); + u16 val; + int rc; + + /* hammer it into sane state */ + inic_reset_port(port_base); + + val = readw(idma_ctl); + writew(val | IDMA_CTL_RST_ATA, idma_ctl); + readw(idma_ctl); /* flush */ + msleep(1); + writew(val & ~IDMA_CTL_RST_ATA, idma_ctl); + + rc = sata_phy_resume(ap, timing); + if (rc) { + ata_port_printk(ap, KERN_WARNING, "failed to resume " + "link after reset (errno=%d)\n", rc); + return rc; + } + + *class = ATA_DEV_NONE; + if (ata_port_online(ap)) { + struct ata_taskfile tf; + + /* wait a while before checking status */ + msleep(150); + + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + ata_port_printk(ap, KERN_WARNING, + "device busy after hardreset\n"); + return -EIO; + } + + ata_tf_read(ap, &tf); + *class = ata_dev_classify(&tf); + if (*class == ATA_DEV_UNKNOWN) + *class = ATA_DEV_NONE; + } + + return 0; +} + +static void inic_error_handler(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + struct inic_port_priv *pp = ap->private_data; + unsigned long flags; + + /* reset PIO HSM and stop DMA engine */ + inic_reset_port(port_base); + + spin_lock_irqsave(ap->lock, flags); + ap->hsm_task_state = HSM_ST_IDLE; + writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL); + spin_unlock_irqrestore(ap->lock, flags); + + /* PIO and DMA engines have been stopped, perform recovery */ + ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset, + ata_std_postreset); +} + +static void inic_post_internal_cmd(struct ata_queued_cmd *qc) +{ + /* make DMA engine forget about the failed command */ + if (qc->err_mask) + inic_reset_port(inic_port_base(qc->ap)); +} + +static void inic_dev_config(struct ata_port *ap, struct ata_device *dev) +{ + /* inic can only handle upto LBA28 max sectors */ + if (dev->max_sectors > ATA_MAX_SECTORS) + dev->max_sectors = ATA_MAX_SECTORS; +} + +static void init_port(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + + /* Setup PRD address */ + writel(ap->prd_dma, port_base + PORT_PRD_ADDR); +} + +static int inic_port_resume(struct ata_port *ap) +{ + init_port(ap); + return 0; +} + +static int inic_port_start(struct ata_port *ap) +{ + void __iomem *port_base = inic_port_base(ap); + struct inic_port_priv *pp; + u8 tmp; + int rc; + + /* alloc and initialize private data */ + pp = devm_kzalloc(ap->host->dev, sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + ap->private_data = pp; + + /* default PRD_CTL value, DMAEN, WR and START off */ + tmp = readb(port_base + PORT_PRD_CTL); + tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START); + pp->dfl_prdctl = tmp; + + /* Alloc resources */ + rc = ata_port_start(ap); + if (rc) { + kfree(pp); + return rc; + } + + init_port(ap); + + return 0; +} + +static struct ata_port_operations inic_port_ops = { + .port_disable = ata_port_disable, + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .scr_read = inic_scr_read, + .scr_write = inic_scr_write, + + .bmdma_setup = inic_bmdma_setup, + .bmdma_start = inic_bmdma_start, + .bmdma_stop = inic_bmdma_stop, + .bmdma_status = inic_bmdma_status, + + .irq_handler = inic_interrupt, + .irq_clear = inic_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, + + .qc_prep = ata_qc_prep, + .qc_issue = inic_qc_issue, + .data_xfer = ata_data_xfer, + + .freeze = inic_freeze, + .thaw = inic_thaw, + .error_handler = inic_error_handler, + .post_internal_cmd = inic_post_internal_cmd, + .dev_config = inic_dev_config, + + .port_resume = inic_port_resume, + + .port_start = inic_port_start, +}; + +static struct ata_port_info inic_port_info = { + .sht = &inic_sht, + /* For some reason, ATA_PROT_ATAPI is broken on this + * controller, and no, PIO_POLLING does't fix it. It somehow + * manages to report the wrong ireason and ignoring ireason + * results in machine lock up. Tell libata to always prefer + * DMA. + */ + .flags = ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &inic_port_ops +}; + +static int init_controller(void __iomem *mmio_base, u16 hctl) +{ + int i; + u16 val; + + hctl &= ~HCTL_KNOWN_BITS; + + /* Soft reset whole controller. Spec says reset duration is 3 + * PCI clocks, be generous and give it 10ms. + */ + writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL); + readw(mmio_base + HOST_CTL); /* flush */ + + for (i = 0; i < 10; i++) { + msleep(1); + val = readw(mmio_base + HOST_CTL); + if (!(val & HCTL_SOFTRST)) + break; + } + + if (val & HCTL_SOFTRST) + return -EIO; + + /* mask all interrupts and reset ports */ + for (i = 0; i < NR_PORTS; i++) { + void __iomem *port_base = mmio_base + i * PORT_SIZE; + + writeb(0xff, port_base + PORT_IRQ_MASK); + inic_reset_port(port_base); + } + + /* port IRQ is masked now, unmask global IRQ */ + writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL); + val = readw(mmio_base + HOST_IRQ_MASK); + val &= ~(HIRQ_PORT0 | HIRQ_PORT1); + writew(val, mmio_base + HOST_IRQ_MASK); + + return 0; +} + +static int inic_pci_device_resume(struct pci_dev *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct inic_host_priv *hpriv = host->private_data; + void __iomem *mmio_base = host->iomap[MMIO_BAR]; + int rc; + + ata_pci_device_do_resume(pdev); + + if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) { + printk("XXX\n"); + rc = init_controller(mmio_base, hpriv->cached_hctl); + if (rc) + return rc; + } + + ata_host_resume(host); + + return 0; +} + +static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + struct ata_port_info *pinfo = &inic_port_info; + struct ata_probe_ent *probe_ent; + struct inic_host_priv *hpriv; + void __iomem * const *iomap; + int i, rc; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + return rc; + + rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME); + if (rc) + return rc; + iomap = pcim_iomap_table(pdev); + + /* Set dma_mask. This devices doesn't support 64bit addressing. */ + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + return rc; + } + + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + + probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL); + hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); + if (!probe_ent || !hpriv) + return -ENOMEM; + + probe_ent->dev = &pdev->dev; + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = pinfo->sht; + probe_ent->port_flags = pinfo->flags; + probe_ent->pio_mask = pinfo->pio_mask; + probe_ent->mwdma_mask = pinfo->mwdma_mask; + probe_ent->udma_mask = pinfo->udma_mask; + probe_ent->port_ops = pinfo->port_ops; + probe_ent->n_ports = NR_PORTS; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + + probe_ent->iomap = iomap; + + for (i = 0; i < NR_PORTS; i++) { + struct ata_ioports *port = &probe_ent->port[i]; + void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE; + + port->cmd_addr = iomap[2 * i]; + port->altstatus_addr = + port->ctl_addr = (void __iomem *) + ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS); + port->scr_addr = port_base + PORT_SCR; + + ata_std_ports(port); + } + + probe_ent->private_data = hpriv; + hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL); + + rc = init_controller(iomap[MMIO_BAR], hpriv->cached_hctl); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to initialize controller\n"); + return rc; + } + + pci_set_master(pdev); + + if (!ata_device_add(probe_ent)) + return -ENODEV; + + devm_kfree(&pdev->dev, probe_ent); + + return 0; +} + +static const struct pci_device_id inic_pci_tbl[] = { + { PCI_VDEVICE(INIT, 0x1622), }, + { }, +}; + +static struct pci_driver inic_pci_driver = { + .name = DRV_NAME, + .id_table = inic_pci_tbl, + .suspend = ata_pci_device_suspend, + .resume = inic_pci_device_resume, + .probe = inic_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init inic_init(void) +{ + return pci_register_driver(&inic_pci_driver); +} + +static void __exit inic_exit(void) +{ + pci_unregister_driver(&inic_pci_driver); +} + +MODULE_AUTHOR("Tejun Heo"); +MODULE_DESCRIPTION("low-level driver for Initio 162x SATA"); +MODULE_LICENSE("GPL v2"); +MODULE_DEVICE_TABLE(pci, inic_pci_tbl); +MODULE_VERSION(DRV_VERSION); + +module_init(inic_init); +module_exit(inic_exit); |