diff options
Diffstat (limited to 'drivers/ata/sata_sil.c')
-rw-r--r-- | drivers/ata/sata_sil.c | 118 |
1 files changed, 59 insertions, 59 deletions
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 917b7ea4ef7..0a1e417f309 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -46,7 +46,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_sil" -#define DRV_VERSION "2.1" +#define DRV_VERSION "2.2" enum { SIL_MMIO_BAR = 5, @@ -114,11 +114,10 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); #ifdef CONFIG_PM static int sil_pci_device_resume(struct pci_dev *pdev); #endif -static void sil_dev_config(struct ata_port *ap, struct ata_device *dev); +static void sil_dev_config(struct ata_device *dev); static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg); static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); -static void sil_post_set_mode (struct ata_port *ap); -static irqreturn_t sil_interrupt(int irq, void *dev_instance); +static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed); static void sil_freeze(struct ata_port *ap); static void sil_thaw(struct ata_port *ap); @@ -197,7 +196,7 @@ static const struct ata_port_operations sil_ops = { .check_status = ata_check_status, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, - .post_set_mode = sil_post_set_mode, + .set_mode = sil_set_mode, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, .bmdma_stop = ata_bmdma_stop, @@ -209,7 +208,6 @@ static const struct ata_port_operations sil_ops = { .thaw = sil_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = sil_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -221,7 +219,6 @@ static const struct ata_port_operations sil_ops = { static const struct ata_port_info sil_port_info[] = { /* sil_3112 */ { - .sht = &sil_sht, .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -230,7 +227,6 @@ static const struct ata_port_info sil_port_info[] = { }, /* sil_3112_no_sata_irq */ { - .sht = &sil_sht, .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE | SIL_FLAG_NO_SATA_IRQ, .pio_mask = 0x1f, /* pio0-4 */ @@ -240,7 +236,6 @@ static const struct ata_port_info sil_port_info[] = { }, /* sil_3512 */ { - .sht = &sil_sht, .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -249,7 +244,6 @@ static const struct ata_port_info sil_port_info[] = { }, /* sil_3114 */ { - .sht = &sil_sht, .flags = SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ @@ -297,7 +291,16 @@ static unsigned char sil_get_device_cache_line(struct pci_dev *pdev) return cache_line; } -static void sil_post_set_mode (struct ata_port *ap) +/** + * sil_set_mode - wrap set_mode functions + * @ap: port to set up + * @r_failed: returned device when we fail + * + * Wrap the libata method for device setup as after the setup we need + * to inspect the results and do some configuration work + */ + +static int sil_set_mode (struct ata_port *ap, struct ata_device **r_failed) { struct ata_host *host = ap->host; struct ata_device *dev; @@ -305,6 +308,11 @@ static void sil_post_set_mode (struct ata_port *ap) void __iomem *addr = mmio_base + sil_port[ap->port_no].xfer_mode; u32 tmp, dev_mode[2]; unsigned int i; + int rc; + + rc = ata_do_set_mode(ap, r_failed); + if (rc) + return rc; for (i = 0; i < 2; i++) { dev = &ap->device[i]; @@ -323,6 +331,7 @@ static void sil_post_set_mode (struct ata_port *ap) tmp |= (dev_mode[1] << 4); writel(tmp, addr); readl(addr); /* flush */ + return 0; } static inline void __iomem *sil_scr_addr(struct ata_port *ap, unsigned int sc_reg) @@ -521,7 +530,6 @@ static void sil_thaw(struct ata_port *ap) /** * sil_dev_config - Apply device/host-specific errata fixups - * @ap: Port containing device to be examined * @dev: Device to be examined * * After the IDENTIFY [PACKET] DEVICE step is complete, and a @@ -548,8 +556,9 @@ static void sil_thaw(struct ata_port *ap) * appreciated. * - But then again UDMA5 is hardly anything to complain about */ -static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) +static void sil_dev_config(struct ata_device *dev) { + struct ata_port *ap = dev->ap; int print_info = ap->eh_context.i.flags & ATA_EHI_PRINTINFO; unsigned int n, quirks = 0; unsigned char model_num[ATA_ID_PROD_LEN + 1]; @@ -583,10 +592,10 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev) } } -static void sil_init_controller(struct pci_dev *pdev, - int n_ports, unsigned long port_flags, - void __iomem *mmio_base) +static void sil_init_controller(struct ata_host *host) { + struct pci_dev *pdev = to_pci_dev(host->dev); + void __iomem *mmio_base = host->iomap[SIL_MMIO_BAR]; u8 cls; u32 tmp; int i; @@ -596,7 +605,7 @@ static void sil_init_controller(struct pci_dev *pdev, if (cls) { cls >>= 3; cls++; /* cls = (line_size/8)+1 */ - for (i = 0; i < n_ports; i++) + for (i = 0; i < host->n_ports; i++) writew(cls << 8 | cls, mmio_base + sil_port[i].fifo_cfg); } else @@ -604,10 +613,10 @@ static void sil_init_controller(struct pci_dev *pdev, "cache line size not set. Driver may not function\n"); /* Apply R_ERR on DMA activate FIS errata workaround */ - if (port_flags & SIL_FLAG_RERR_ON_DMA_ACT) { + if (host->ports[0]->flags & SIL_FLAG_RERR_ON_DMA_ACT) { int cnt; - for (i = 0, cnt = 0; i < n_ports; i++) { + for (i = 0, cnt = 0; i < host->n_ports; i++) { tmp = readl(mmio_base + sil_port[i].sfis_cfg); if ((tmp & 0x3) != 0x01) continue; @@ -620,7 +629,7 @@ static void sil_init_controller(struct pci_dev *pdev, } } - if (n_ports == 4) { + if (host->n_ports == 4) { /* flip the magic "make 4 ports work" bit */ tmp = readl(mmio_base + sil_port[2].bmdma); if ((tmp & SIL_INTR_STEERING) == 0) @@ -632,15 +641,26 @@ static void sil_init_controller(struct pci_dev *pdev, static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct device *dev = &pdev->dev; - struct ata_probe_ent *probe_ent; + int board_id = ent->driver_data; + const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL }; + struct ata_host *host; void __iomem *mmio_base; - int rc; + int n_ports, rc; unsigned int i; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* allocate host */ + n_ports = 2; + if (board_id == sil_3114) + n_ports = 4; + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + + /* acquire resources and fill host */ rc = pcim_enable_device(pdev); if (rc) return rc; @@ -650,6 +670,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) pcim_pin_device(pdev); if (rc) return rc; + host->iomap = pcim_iomap_table(pdev); rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) @@ -658,45 +679,25 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) return rc; - probe_ent = devm_kzalloc(dev, sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) - return -ENOMEM; + mmio_base = host->iomap[SIL_MMIO_BAR]; - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = pci_dev_to_dev(pdev); - probe_ent->port_ops = sil_port_info[ent->driver_data].port_ops; - probe_ent->sht = sil_port_info[ent->driver_data].sht; - probe_ent->n_ports = (ent->driver_data == sil_3114) ? 4 : 2; - probe_ent->pio_mask = sil_port_info[ent->driver_data].pio_mask; - probe_ent->mwdma_mask = sil_port_info[ent->driver_data].mwdma_mask; - probe_ent->udma_mask = sil_port_info[ent->driver_data].udma_mask; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->port_flags = sil_port_info[ent->driver_data].flags; - - probe_ent->iomap = pcim_iomap_table(pdev); - - mmio_base = probe_ent->iomap[SIL_MMIO_BAR]; - - for (i = 0; i < probe_ent->n_ports; i++) { - probe_ent->port[i].cmd_addr = mmio_base + sil_port[i].tf; - probe_ent->port[i].altstatus_addr = - probe_ent->port[i].ctl_addr = mmio_base + sil_port[i].ctl; - probe_ent->port[i].bmdma_addr = mmio_base + sil_port[i].bmdma; - probe_ent->port[i].scr_addr = mmio_base + sil_port[i].scr; - ata_std_ports(&probe_ent->port[i]); + for (i = 0; i < host->n_ports; i++) { + struct ata_ioports *ioaddr = &host->ports[i]->ioaddr; + + ioaddr->cmd_addr = mmio_base + sil_port[i].tf; + ioaddr->altstatus_addr = + ioaddr->ctl_addr = mmio_base + sil_port[i].ctl; + ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma; + ioaddr->scr_addr = mmio_base + sil_port[i].scr; + ata_std_ports(ioaddr); } - sil_init_controller(pdev, probe_ent->n_ports, probe_ent->port_flags, - mmio_base); + /* initialize and activate */ + sil_init_controller(host); pci_set_master(pdev); - - if (!ata_device_add(probe_ent)) - return -ENODEV; - - devm_kfree(dev, probe_ent); - return 0; + return ata_host_activate(host, pdev->irq, sil_interrupt, IRQF_SHARED, + &sil_sht); } #ifdef CONFIG_PM @@ -709,8 +710,7 @@ static int sil_pci_device_resume(struct pci_dev *pdev) if (rc) return rc; - sil_init_controller(pdev, host->n_ports, host->ports[0]->flags, - host->iomap[SIL_MMIO_BAR]); + sil_init_controller(host); ata_host_resume(host); return 0; |