diff options
Diffstat (limited to 'drivers/ata/sata_svw.c')
| -rw-r--r-- | drivers/ata/sata_svw.c | 51 |
1 files changed, 12 insertions, 39 deletions
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 840d1c4a785..16aa6839aa5 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -233,7 +233,7 @@ static void k2_bmdma_setup_mmio(struct ata_queued_cmd *qc) /* issue r/w command if this is not a ATA DMA command*/ if (qc->tf.protocol != ATA_PROT_DMA) - ap->ops->exec_command(ap, &qc->tf); + ap->ops->sff_exec_command(ap, &qc->tf); } /** @@ -269,7 +269,7 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc) and the start command. */ /* issue r/w command if the access is to ATA*/ if (qc->tf.protocol == ATA_PROT_DMA) - ap->ops->exec_command(ap, &qc->tf); + ap->ops->sff_exec_command(ap, &qc->tf); } @@ -327,50 +327,23 @@ static int k2_sata_proc_info(struct Scsi_Host *shost, char *page, char **start, static struct scsi_host_template k2_sata_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, + ATA_BMDMA_SHT(DRV_NAME), #ifdef CONFIG_PPC_OF .proc_info = k2_sata_proc_info, #endif - .bios_param = ata_std_bios_param, }; -static const struct ata_port_operations k2_sata_ops = { - .tf_load = k2_sata_tf_load, - .tf_read = k2_sata_tf_read, - .check_status = k2_stat_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, +static struct ata_port_operations k2_sata_ops = { + .inherits = &ata_bmdma_port_ops, + .sff_tf_load = k2_sata_tf_load, + .sff_tf_read = k2_sata_tf_read, + .sff_check_status = k2_stat_check_status, .check_atapi_dma = k2_sata_check_atapi_dma, .bmdma_setup = k2_bmdma_setup_mmio, .bmdma_start = k2_bmdma_start_mmio, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_data_xfer, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = ata_bmdma_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, .scr_read = k2_sata_scr_read, .scr_write = k2_sata_scr_write, - .port_start = ata_port_start, }; static const struct ata_port_info k2_port_info[] = { @@ -519,8 +492,8 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); pci_set_master(pdev); - return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, - &k2_sata_sht); + return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + IRQF_SHARED, &k2_sata_sht); } /* 0x240 is device ID for Apple K2 device @@ -531,8 +504,8 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en * */ static const struct pci_device_id k2_sata_pci_tbl[] = { { PCI_VDEVICE(SERVERWORKS, 0x0240), chip_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw4 }, - { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw8 }, + { PCI_VDEVICE(SERVERWORKS, 0x0241), chip_svw8 }, + { PCI_VDEVICE(SERVERWORKS, 0x0242), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x024a), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x024b), chip_svw4 }, { PCI_VDEVICE(SERVERWORKS, 0x0410), chip_svw42 }, |