diff options
Diffstat (limited to 'drivers/ata/sata_via.c')
| -rw-r--r-- | drivers/ata/sata_via.c | 35 |
1 files changed, 31 insertions, 4 deletions
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 08f65492cc8..4730c42a5ee 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -308,7 +308,7 @@ static void svia_noop_freeze(struct ata_port *ap) * certain way. Leave it alone and just clear pending IRQ. */ ap->ops->sff_check_status(ap); - ata_sff_irq_clear(ap); + ata_bmdma_irq_clear(ap); } /** @@ -463,7 +463,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) struct ata_host *host; int rc; - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); if (rc) return rc; *r_host = host; @@ -520,7 +520,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) struct ata_host *host; int i, rc; - rc = ata_pci_sff_prepare_host(pdev, ppi, &host); + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); if (rc) return rc; *r_host = host; @@ -575,6 +575,33 @@ static void svia_configure(struct pci_dev *pdev) tmp8 |= NATIVE_MODE_ALL; pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); } + + /* + * vt6421 has problems talking to some drives. The following + * is the fix from Joseph Chan <JosephChan@via.com.tw>. + * + * When host issues HOLD, device may send up to 20DW of data + * before acknowledging it with HOLDA and the host should be + * able to buffer them in FIFO. Unfortunately, some WD drives + * send upto 40DW before acknowledging HOLD and, in the + * default configuration, this ends up overflowing vt6421's + * FIFO, making the controller abort the transaction with + * R_ERR. + * + * Rx52[2] is the internal 128DW FIFO Flow control watermark + * adjusting mechanism enable bit and the default value 0 + * means host will issue HOLD to device when the left FIFO + * size goes below 32DW. Setting it to 1 makes the watermark + * 64DW. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=15173 + * http://article.gmane.org/gmane.linux.ide/46352 + */ + if (pdev->device == 0x3249) { + pci_read_config_byte(pdev, 0x52, &tmp8); + tmp8 |= 1 << 2; + pci_write_config_byte(pdev, 0x52, tmp8); + } } static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) @@ -628,7 +655,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) svia_configure(pdev); pci_set_master(pdev); - return ata_host_activate(host, pdev->irq, ata_sff_interrupt, + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, IRQF_SHARED, &svia_sht); } |