diff options
Diffstat (limited to 'drivers/ata/sata_vsc.c')
-rw-r--r-- | drivers/ata/sata_vsc.c | 72 |
1 files changed, 28 insertions, 44 deletions
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index 170bad1b415..80126f835d3 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -333,7 +333,6 @@ static const struct ata_port_operations vsc_sata_ops = { .thaw = vsc_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = vsc_sata_interrupt, .irq_clear = ata_bmdma_irq_clear, .irq_on = ata_irq_on, .irq_ack = ata_irq_ack, @@ -367,30 +366,50 @@ static void __devinit vsc_sata_setup_port(struct ata_ioports *port, static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { + static const struct ata_port_info pi = { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &vsc_sata_ops, + }; + const struct ata_port_info *ppi[] = { &pi, NULL }; static int printed_version; - struct ata_probe_ent *probe_ent; + struct ata_host *host; void __iomem *mmio_base; - int rc; + int i, rc; u8 cls; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* allocate host */ + host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4); + if (!host) + return -ENOMEM; + rc = pcim_enable_device(pdev); if (rc) return rc; - /* - * Check if we have needed resource mapped. - */ + /* check if we have needed resource mapped */ if (pci_resource_len(pdev, 0) == 0) return -ENODEV; + /* map IO regions and intialize host accordingly */ rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME); if (rc == -EBUSY) pcim_pin_device(pdev); if (rc) return rc; + host->iomap = pcim_iomap_table(pdev); + + mmio_base = host->iomap[VSC_MMIO_BAR]; + + for (i = 0; i < host->n_ports; i++) + vsc_sata_setup_port(&host->ports[i]->ioaddr, + mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET); /* * Use 32 bit DMA mask, because 64 bit address support is poor. @@ -402,12 +421,6 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d if (rc) return rc; - probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) - return -ENOMEM; - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - /* * Due to a bug in the chip, the default cache line size can't be * used (unless the default is non-zero). @@ -418,33 +431,6 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d if (pci_enable_msi(pdev) == 0) pci_intx(pdev, 0); - else - probe_ent->irq_flags = IRQF_SHARED; - - probe_ent->sht = &vsc_sata_sht; - probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO; - probe_ent->port_ops = &vsc_sata_ops; - probe_ent->n_ports = 4; - probe_ent->irq = pdev->irq; - probe_ent->iomap = pcim_iomap_table(pdev); - - /* We don't care much about the PIO/UDMA masks, but the core won't like us - * if we don't fill these - */ - probe_ent->pio_mask = 0x1f; - probe_ent->mwdma_mask = 0x07; - probe_ent->udma_mask = 0x7f; - - mmio_base = probe_ent->iomap[VSC_MMIO_BAR]; - - /* We have 4 ports per PCI function */ - vsc_sata_setup_port(&probe_ent->port[0], mmio_base + 1 * VSC_SATA_PORT_OFFSET); - vsc_sata_setup_port(&probe_ent->port[1], mmio_base + 2 * VSC_SATA_PORT_OFFSET); - vsc_sata_setup_port(&probe_ent->port[2], mmio_base + 3 * VSC_SATA_PORT_OFFSET); - vsc_sata_setup_port(&probe_ent->port[3], mmio_base + 4 * VSC_SATA_PORT_OFFSET); - - pci_set_master(pdev); /* * Config offset 0x98 is "Extended Control and Status Register 0" @@ -454,11 +440,9 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d */ pci_write_config_dword(pdev, 0x98, 0); - if (!ata_device_add(probe_ent)) - return -ENODEV; - - devm_kfree(&pdev->dev, probe_ent); - return 0; + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, vsc_sata_interrupt, + IRQF_SHARED, &vsc_sata_sht); } static const struct pci_device_id vsc_sata_pci_tbl[] = { |