diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/Kconfig | 17 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 2 | ||||
| -rw-r--r-- | drivers/ata/ahci.c | 1 | ||||
| -rw-r--r-- | drivers/ata/libata-acpi.c | 4 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 45 | ||||
| -rw-r--r-- | drivers/ata/libata-eh.c | 6 | ||||
| -rw-r--r-- | drivers/ata/pata_at91.c | 362 | ||||
| -rw-r--r-- | drivers/ata/pata_mpc52xx.c | 2 | ||||
| -rw-r--r-- | drivers/ata/pata_palmld.c | 150 | ||||
| -rw-r--r-- | drivers/ata/sata_fsl.c | 35 |
10 files changed, 608 insertions, 16 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 9120717c070..b17c57f8503 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -535,6 +535,15 @@ config PATA_OPTIDMA If unsure, say N. +config PATA_PALMLD + tristate "Palm LifeDrive PATA support" + depends on MACH_PALMLD + help + This option enables support for Palm LifeDrive's internal ATA + port via the new ATA layer. + + If unsure, say N. + config PATA_PCMCIA tristate "PCMCIA PATA support" depends on PCMCIA @@ -670,6 +679,14 @@ config PATA_PLATFORM If unsure, say N. +config PATA_AT91 + tristate "PATA support for AT91SAM9260" + depends on ARM && ARCH_AT91 + help + This option enables support for IDE devices on the Atmel AT91SAM9260 SoC. + + If unsure, say N. + config PATA_OF_PLATFORM tristate "OpenFirmware platform device PATA support" depends on PATA_PLATFORM && PPC_OF diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index 7f1ecf99528..38906f9bbb4 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_PATA_MPC52xx) += pata_mpc52xx.o obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o +obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o @@ -71,6 +72,7 @@ obj-$(CONFIG_PATA_SCH) += pata_sch.o obj-$(CONFIG_PATA_BF54X) += pata_bf54x.o obj-$(CONFIG_PATA_OCTEON_CF) += pata_octeon_cf.o obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o +obj-$(CONFIG_PATA_AT91) += pata_at91.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_ICSIDE) += pata_icside.o # Should be last but two libata driver diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 15a23031833..336eb1ed73c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -513,6 +513,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */ { PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */ { PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */ + { PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */ { PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */ { PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */ diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index 6273d98d00e..ac176da1f94 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -748,9 +748,9 @@ static int ata_acpi_run_tf(struct ata_device *dev, /** * ata_acpi_exec_tfs - get then write drive taskfile settings * @dev: target ATA device - * @nr_executed: out paramter for the number of executed commands + * @nr_executed: out parameter for the number of executed commands * - * Evaluate _GTF and excute returned taskfiles. + * Evaluate _GTF and execute returned taskfiles. * * LOCKING: * EH context. diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ca4d208ddf3..2c6aedaef71 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -125,19 +125,19 @@ MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link spe static int atapi_enabled = 1; module_param(atapi_enabled, int, 0444); -MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); +MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])"); static int atapi_dmadir = 0; module_param(atapi_dmadir, int, 0444); -MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)"); +MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)"); int atapi_passthru16 = 1; module_param(atapi_passthru16, int, 0444); -MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)"); +MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])"); int libata_fua = 0; module_param_named(fua, libata_fua, int, 0444); -MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)"); +MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)"); static int ata_ignore_hpa; module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644); @@ -153,11 +153,11 @@ MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)"); int libata_noacpi = 0; module_param_named(noacpi, libata_noacpi, int, 0444); -MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set"); +MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)"); int libata_allow_tpm = 0; module_param_named(allow_tpm, libata_allow_tpm, int, 0444); -MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands"); +MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)"); MODULE_AUTHOR("Jeff Garzik"); MODULE_DESCRIPTION("Library module for ATA devices"); @@ -1993,11 +1993,17 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd) * Check if the current speed of the device requires IORDY. Used * by various controllers for chip configuration. */ - unsigned int ata_pio_need_iordy(const struct ata_device *adev) { - /* Controller doesn't support IORDY. Probably a pointless check - as the caller should know this */ + /* Don't set IORDY if we're preparing for reset. IORDY may + * lead to controller lock up on certain controllers if the + * port is not occupied. See bko#11703 for details. + */ + if (adev->link->ap->pflags & ATA_PFLAG_RESETTING) + return 0; + /* Controller doesn't support IORDY. Probably a pointless + * check as the caller should know this. + */ if (adev->link->ap->flags & ATA_FLAG_NO_IORDY) return 0; /* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */ @@ -2020,7 +2026,6 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) * Compute the highest mode possible if we are not using iordy. Return * -1 if no iordy mode is available. */ - static u32 ata_pio_mask_no_iordy(const struct ata_device *adev) { /* If we have no drive specific rule, then PIO 2 is non IORDY */ @@ -3387,17 +3392,27 @@ int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel) static int ata_dev_set_mode(struct ata_device *dev) { + struct ata_port *ap = dev->link->ap; struct ata_eh_context *ehc = &dev->link->eh_context; + const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER; const char *dev_err_whine = ""; int ign_dev_err = 0; - unsigned int err_mask; + unsigned int err_mask = 0; int rc; dev->flags &= ~ATA_DFLAG_PIO; if (dev->xfer_shift == ATA_SHIFT_PIO) dev->flags |= ATA_DFLAG_PIO; - err_mask = ata_dev_set_xfermode(dev); + if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id)) + dev_err_whine = " (SET_XFERMODE skipped)"; + else { + if (nosetxfer) + ata_dev_printk(dev, KERN_WARNING, + "NOSETXFER but PATA detected - can't " + "skip SETXFER, might malfunction\n"); + err_mask = ata_dev_set_xfermode(dev); + } if (err_mask & ~AC_ERR_DEV) goto fail; @@ -4292,6 +4307,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { /* Devices which aren't very happy with higher link speeds */ { "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, }, + /* + * Devices which choke on SETXFER. Applies only if both the + * device and controller are SATA. + */ + { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER }, + /* End Marker */ { } }; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 94919ad03df..1a07c061f64 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -2517,6 +2517,10 @@ int ata_eh_reset(struct ata_link *link, int classify, ata_eh_about_to_do(link, NULL, ATA_EH_RESET); rc = ata_do_reset(link, reset, classes, deadline, true); + if (rc) { + failed_link = link; + goto fail; + } } } else { if (verbose) @@ -2864,7 +2868,7 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link, /** * ata_set_mode - Program timings and issue SET FEATURES - XFER * @link: link on which timings will be programmed - * @r_failed_dev: out paramter for failed device + * @r_failed_dev: out parameter for failed device * * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If * ata_set_mode() fails, pointer to the failing device is diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c new file mode 100644 index 00000000000..8561a9f195c --- /dev/null +++ b/drivers/ata/pata_at91.c @@ -0,0 +1,362 @@ +/* + * PATA driver for AT91SAM9260 Static Memory Controller + * with CompactFlash interface in True IDE mode + * + * Copyright (C) 2009 Matyukevich Sergey + * + * Based on: + * * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c + * * pata_at32 driver by Kristoffer Nyborg Gregertsen + * * at91_ide driver by Stanislaw Gruszka + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <scsi/scsi_host.h> +#include <linux/ata.h> +#include <linux/clk.h> +#include <linux/libata.h> +#include <linux/platform_device.h> +#include <linux/ata_platform.h> + +#include <mach/at91sam9260_matrix.h> +#include <mach/at91sam9_smc.h> +#include <mach/at91sam9260.h> +#include <mach/board.h> +#include <mach/gpio.h> + + +#define DRV_NAME "pata_at91" +#define DRV_VERSION "0.1" + +#define CF_IDE_OFFSET 0x00c00000 +#define CF_ALT_IDE_OFFSET 0x00e00000 +#define CF_IDE_RES_SIZE 0x08 + +struct at91_ide_info { + unsigned long mode; + unsigned int cs; + + void __iomem *ide_addr; + void __iomem *alt_addr; +}; + +const struct ata_timing initial_timing = + {XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0}; + +static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz) +{ + unsigned long mul; + + /* + * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] = + * x * (f / 1_000_000_000) = + * x * ((f * 65536) / 1_000_000_000) / 65536 = + * x * (((f / 10_000) * 65536) / 100_000) / 65536 = + */ + + mul = (mck_hz / 10000) << 16; + mul /= 100000; + + return (ns * mul + 65536) >> 16; /* rounding */ +} + +static void set_smc_mode(struct at91_ide_info *info) +{ + at91_sys_write(AT91_SMC_MODE(info->cs), info->mode); + return; +} + +static void set_smc_timing(struct device *dev, + struct at91_ide_info *info, const struct ata_timing *ata) +{ + int read_cycle, write_cycle, active, recover; + int nrd_setup, nrd_pulse, nrd_recover; + int nwe_setup, nwe_pulse; + + int ncs_write_setup, ncs_write_pulse; + int ncs_read_setup, ncs_read_pulse; + + unsigned int mck_hz; + struct clk *mck; + + read_cycle = ata->cyc8b; + nrd_setup = ata->setup; + nrd_pulse = ata->act8b; + nrd_recover = ata->rec8b; + + mck = clk_get(NULL, "mck"); + BUG_ON(IS_ERR(mck)); + mck_hz = clk_get_rate(mck); + + read_cycle = calc_mck_cycles(read_cycle, mck_hz); + nrd_setup = calc_mck_cycles(nrd_setup, mck_hz); + nrd_pulse = calc_mck_cycles(nrd_pulse, mck_hz); + nrd_recover = calc_mck_cycles(nrd_recover, mck_hz); + + clk_put(mck); + + active = nrd_setup + nrd_pulse; + recover = read_cycle - active; + + /* Need at least two cycles recovery */ + if (recover < 2) + read_cycle = active + 2; + + /* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */ + ncs_read_setup = 1; + ncs_read_pulse = read_cycle - 2; + + /* Write timings same as read timings */ + write_cycle = read_cycle; + nwe_setup = nrd_setup; + nwe_pulse = nrd_pulse; + ncs_write_setup = ncs_read_setup; + ncs_write_pulse = ncs_read_pulse; + + dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n", + nrd_setup, nrd_pulse, read_cycle); + dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n", + nwe_setup, nwe_pulse, write_cycle); + dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n", + ncs_read_setup, ncs_read_pulse); + dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n", + ncs_write_setup, ncs_write_pulse); + + at91_sys_write(AT91_SMC_SETUP(info->cs), + AT91_SMC_NWESETUP_(nwe_setup) | + AT91_SMC_NRDSETUP_(nrd_setup) | + AT91_SMC_NCS_WRSETUP_(ncs_write_setup) | + AT91_SMC_NCS_RDSETUP_(ncs_read_setup)); + + at91_sys_write(AT91_SMC_PULSE(info->cs), + AT91_SMC_NWEPULSE_(nwe_pulse) | + AT91_SMC_NRDPULSE_(nrd_pulse) | + AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) | + AT91_SMC_NCS_RDPULSE_(ncs_read_pulse)); + + at91_sys_write(AT91_SMC_CYCLE(info->cs), + AT91_SMC_NWECYCLE_(write_cycle) | + AT91_SMC_NRDCYCLE_(read_cycle)); + + return; +} + +static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + struct at91_ide_info *info = ap->host->private_data; + struct ata_timing timing; + int ret; + + /* Compute ATA timing and set it to SMC */ + ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); + if (ret) { + dev_warn(ap->dev, "Failed to compute ATA timing %d, \ + set PIO_0 timing\n", ret); + set_smc_timing(ap->dev, info, &initial_timing); + } else { + set_smc_timing(ap->dev, info, &timing); + } + + /* Setup SMC mode */ + set_smc_mode(info); + + return; +} + +static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev, + unsigned char *buf, unsigned int buflen, int rw) +{ + struct at91_ide_info *info = dev->link->ap->host->private_data; + unsigned int consumed; + unsigned long flags; + unsigned int mode; + + local_irq_save(flags); + mode = at91_sys_read(AT91_SMC_MODE(info->cs)); + + /* set 16bit mode before writing data */ + at91_sys_write(AT91_SMC_MODE(info->cs), + (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16); + + consumed = ata_sff_data_xfer(dev, buf, buflen, rw); + + /* restore 8bit mode after data is written */ + at91_sys_write(AT91_SMC_MODE(info->cs), + (mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8); + + local_irq_restore(flags); + return consumed; +} + +static struct scsi_host_template pata_at91_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations pata_at91_port_ops = { + .inherits = &ata_sff_port_ops, + + .sff_data_xfer = pata_at91_data_xfer_noirq, + .set_piomode = pata_at91_set_piomode, + .cable_detect = ata_cable_40wire, + .port_start = ATA_OP_NULL, +}; + +static int __devinit pata_at91_probe(struct platform_device *pdev) +{ + struct at91_cf_data *board = pdev->dev.platform_data; + struct device *dev = &pdev->dev; + struct at91_ide_info *info; + struct resource *mem_res; + struct ata_host *host; + struct ata_port *ap; + int irq_flags = 0; + int irq = 0; + int ret; + + /* get platform resources: IO/CTL memories and irq/rst pins */ + + if (pdev->num_resources != 1) { + dev_err(&pdev->dev, "invalid number of resources\n"); + return -EINVAL; + } + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (!mem_res) { + dev_err(dev, "failed to get mem resource\n"); + return -EINVAL; + } + + irq = board->irq_pin; + + /* init ata host */ + + host = ata_host_alloc(dev, 1); + + if (!host) + return -ENOMEM; + + ap = host->ports[0]; + ap->ops = &pata_at91_port_ops; + ap->flags |= ATA_FLAG_SLAVE_POSS; + ap->pio_mask = ATA_PIO4; + + if (!irq) { + ap->flags |= ATA_FLAG_PIO_POLLING; + ata_port_desc(ap, "no IRQ, using PIO polling"); + } + + info = kzalloc(sizeof(*info), GFP_KERNEL); + + if (!info) { + dev_err(dev, "failed to allocate memory for private data\n"); + return -ENOMEM; + } + + info->cs = board->chipselect; + info->mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT | + AT91_SMC_DBW_8 | AT91_SMC_TDF_(0); + + info->ide_addr = devm_ioremap(dev, + mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE); + + if (!info->ide_addr) { + dev_err(dev, "failed to map IO base\n"); + ret = -ENOMEM; + goto err_ide_ioremap; + } + + info->alt_addr = devm_ioremap(dev, + mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE); + + if (!info->alt_addr) { + dev_err(dev, "failed to map CTL base\n"); + ret = -ENOMEM; + goto err_alt_ioremap; + } + + ap->ioaddr.cmd_addr = info->ide_addr; + ap->ioaddr.ctl_addr = info->alt_addr + 0x06; + ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr; + + ata_sff_std_ports(&ap->ioaddr); + + ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx", + (unsigned long long)mem_res->start + CF_IDE_OFFSET, + (unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET); + + host->private_data = info; + + return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0, + irq ? ata_sff_interrupt : NULL, + irq_flags, &pata_at91_sht); + +err_alt_ioremap: + devm_iounmap(dev, info->ide_addr); + +err_ide_ioremap: + kfree(info); + + return ret; +} + +static int __devexit pata_at91_remove(struct platform_device *pdev) +{ + struct ata_host *host = dev_get_drvdata(&pdev->dev); + struct at91_ide_info *info; + struct device *dev = &pdev->dev; + + if (!host) + return 0; + info = host->private_data; + + ata_host_detach(host); + + if (!info) + return 0; + + devm_iounmap(dev, info->ide_addr); + devm_iounmap(dev, info->alt_addr); + + kfree(info); + return 0; +} + +static struct platform_driver pata_at91_driver = { + .probe = pata_at91_probe, + .remove = __devexit_p(pata_at91_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init pata_at91_init(void) +{ + return platform_driver_register(&pata_at91_driver); +} + +static void __exit pata_at91_exit(void) +{ + platform_driver_unregister(&pata_at91_driver); +} + + +module_init(pata_at91_init); +module_exit(pata_at91_exit); + + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC"); +MODULE_AUTHOR("Matyukevich Sergey"); +MODULE_VERSION(DRV_VERSION); + diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 68d27bc70d0..2bc2dbe30e8 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -694,7 +694,7 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) struct bcom_task *dmatsk = NULL; /* Get ipb frequency */ - ipb_freq = mpc52xx_find_ipb_freq(op->node); + ipb_freq = mpc5xxx_get_bus_frequency(op->node); if (!ipb_freq) { dev_err(&op->dev, "could not determine IPB bus frequency\n"); return -ENODEV; diff --git a/drivers/ata/pata_palmld.c b/drivers/ata/pata_palmld.c new file mode 100644 index 00000000000..11fb4ccc74b --- /dev/null +++ b/drivers/ata/pata_palmld.c @@ -0,0 +1,150 @@ +/* + * drivers/ata/pata_palmld.c + * + * Driver for IDE channel in Palm LifeDrive + * + * Based on research of: + * Alex Osborne <ato@meshy.org> + * + * Rewrite for mainline: + * Marek Vasut <marek.vasut@gmail.com> + * + * Rewritten version based on pata_ixp4xx_cf.c: + * ixp4xx PATA/Compact Flash driver + * Copyright (C) 2006-07 Tower Technologies + * Author: Alessandro Zummo <a.zummo@towertech.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/libata.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +#include <scsi/scsi_host.h> +#include <mach/palmld.h> + +#define DRV_NAME "pata_palmld" + +static struct scsi_host_template palmld_sht = { + ATA_PIO_SHT(DRV_NAME), +}; + +static struct ata_port_operations palmld_port_ops = { + .inherits = &ata_sff_port_ops, + .sff_data_xfer = ata_sff_data_xfer_noirq, + .cable_detect = ata_cable_40wire, +}; + +static __devinit int palmld_pata_probe(struct platform_device *pdev) +{ + struct ata_host *host; + struct ata_port *ap; + void __iomem *mem; + int ret; + + /* allocate host */ + host = ata_host_alloc(&pdev->dev, 1); + if (!host) + return -ENOMEM; + + /* remap drive's physical memory address */ + mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000); + if (!mem) + return -ENOMEM; + + /* request and activate power GPIO, IRQ GPIO */ + ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR"); + if (ret) + goto err1; + ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1); + if (ret) + goto err2; + + ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0); + if (ret) + goto err3; + + /* reset the drive */ + gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0); + msleep(30); + gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1); + msleep(30); + + /* setup the ata port */ + ap = host->ports[0]; + ap->ops = &palmld_port_ops; + ap->pio_mask = ATA_PIO4; + ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING; + + /* memory mapping voodoo */ + ap->ioaddr.cmd_addr = mem + 0x10; + ap->ioaddr.altstatus_addr = mem + 0xe; + ap->ioaddr.ctl_addr = mem + 0xe; + + /* start the port */ + ata_sff_std_ports(&ap->ioaddr); + + /* activate host */ + return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING, + &palmld_sht); + +err3: + gpio_free(GPIO_NR_PALMLD_IDE_RESET); +err2: + gpio_free(GPIO_NR_PALMLD_IDE_PWEN); +err1: + return ret; +} + +static __devexit int palmld_pata_remove(struct platform_device *dev) +{ + struct ata_host *host = platform_get_drvdata(dev); + + ata_host_detach(host); + + /* power down the HDD */ + gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0); + + gpio_free(GPIO_NR_PALMLD_IDE_RESET); + gpio_free(GPIO_NR_PALMLD_IDE_PWEN); + + return 0; +} + +static struct platform_driver palmld_pata_platform_driver = { + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, + .probe = palmld_pata_probe, + .remove = __devexit_p(palmld_pata_remove), +}; + +static int __init palmld_pata_init(void) +{ + return platform_driver_register(&palmld_pata_platform_driver); +} + +static void __exit palmld_pata_exit(void) +{ + platform_driver_unregister(&palmld_pata_platform_driver); +} + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PalmLD PATA driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); + +module_init(palmld_pata_init); +module_exit(palmld_pata_exit); diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 36b8629203b..94eaa432c40 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1378,6 +1378,37 @@ static int sata_fsl_remove(struct of_device *ofdev) return 0; } +#ifdef CONFIG_PM +static int sata_fsl_suspend(struct of_device *op, pm_message_t state) +{ + struct ata_host *host = dev_get_drvdata(&op->dev); + return ata_host_suspend(host, state); +} + +static int sata_fsl_resume(struct of_device *op) +{ + struct ata_host *host = dev_get_drvdata(&op->dev); + struct sata_fsl_host_priv *host_priv = host->private_data; + int ret; + void __iomem *hcr_base = host_priv->hcr_base; + struct ata_port *ap = host->ports[0]; + struct sata_fsl_port_priv *pp = ap->private_data; + + ret = sata_fsl_init_controller(host); + if (ret) { + dev_printk(KERN_ERR, &op->dev, + "Error initialize hardware\n"); + return ret; + } + + /* Recovery the CHBA register in host controller cmd register set */ + iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA); + + ata_host_resume(host); + return 0; +} +#endif + static struct of_device_id fsl_sata_match[] = { { .compatible = "fsl,pq-sata", @@ -1392,6 +1423,10 @@ static struct of_platform_driver fsl_sata_driver = { .match_table = fsl_sata_match, .probe = sata_fsl_probe, .remove = sata_fsl_remove, +#ifdef CONFIG_PM + .suspend = sata_fsl_suspend, + .resume = sata_fsl_resume, +#endif }; static int __init sata_fsl_init(void) |