summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/Kconfig2
-rw-r--r--drivers/ata/ahci.c21
-rw-r--r--drivers/ata/ata_piix.c11
-rw-r--r--drivers/ata/libata-acpi.c32
-rw-r--r--drivers/ata/libata-core.c67
-rw-r--r--drivers/ata/libata-eh.c96
-rw-r--r--drivers/ata/libata-scsi.c2
-rw-r--r--drivers/ata/libata.h2
-rw-r--r--drivers/ata/pata_cs5520.c2
-rw-r--r--drivers/ata/pata_ixp4xx_cf.c3
-rw-r--r--drivers/ata/pata_mpc52xx.c2
-rw-r--r--drivers/ata/pata_pdc202xx_old.c2
-rw-r--r--drivers/ata/sata_inic162x.c4
-rw-r--r--drivers/ata/sata_nv.c8
-rw-r--r--drivers/ata/sata_sil24.c1
-rw-r--r--drivers/ata/sata_sis.c2
16 files changed, 181 insertions, 76 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index d16b5b0c8b7..7bdbe5a914d 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -564,7 +564,7 @@ config PATA_IXP4XX_CF
config PATA_SCC
tristate "Toshiba's Cell Reference Set IDE support"
- depends on PCI && PPC_IBM_CELL_BLADE
+ depends on PCI && PPC_CELLEB
help
This option enables support for the built-in IDE controller on
Toshiba Cell Reference Board.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index dc7b5622592..fd27227771b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -80,6 +80,7 @@ enum {
board_ahci_pi = 1,
board_ahci_vt8251 = 2,
board_ahci_ign_iferr = 3,
+ board_ahci_sb600 = 4,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -168,6 +169,7 @@ enum {
AHCI_FLAG_NO_NCQ = (1 << 24),
AHCI_FLAG_IGN_IRQ_IF_ERR = (1 << 25), /* ignore IRQ_IF_ERR */
AHCI_FLAG_HONOR_PI = (1 << 26), /* honor PORTS_IMPL */
+ AHCI_FLAG_IGN_SERR_INTERNAL = (1 << 27), /* ignore SERR_INTERNAL */
};
struct ahci_cmd_hdr {
@@ -362,6 +364,18 @@ static const struct ata_port_info ahci_port_info[] = {
.udma_mask = 0x7f, /* udma0-6 ; FIXME */
.port_ops = &ahci_ops,
},
+ /* board_ahci_sb600 */
+ {
+ .sht = &ahci_sht,
+ .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
+ ATA_FLAG_SKIP_D2H_BSY |
+ AHCI_FLAG_IGN_SERR_INTERNAL,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = 0x7f, /* udma0-6 ; FIXME */
+ .port_ops = &ahci_ops,
+ },
+
};
static const struct pci_device_id ahci_pci_tbl[] = {
@@ -399,7 +413,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
/* ATI */
- { PCI_VDEVICE(ATI, 0x4380), board_ahci }, /* ATI SB600 non-raid */
+ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 non-raid */
{ PCI_VDEVICE(ATI, 0x4381), board_ahci }, /* ATI SB600 raid */
/* VIA */
@@ -1067,8 +1081,11 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
if (ap->flags & AHCI_FLAG_IGN_IRQ_IF_ERR)
irq_stat &= ~PORT_IRQ_IF_ERR;
- if (irq_stat & PORT_IRQ_TF_ERR)
+ if (irq_stat & PORT_IRQ_TF_ERR) {
err_mask |= AC_ERR_DEV;
+ if (ap->flags & AHCI_FLAG_IGN_SERR_INTERNAL)
+ serror &= ~SERR_INTERNAL;
+ }
if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
err_mask |= AC_ERR_HOST_BUS;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index dc42ba1b46f..b952c584338 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -93,7 +93,7 @@
#include <linux/libata.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "2.10"
+#define DRV_VERSION "2.10ac1"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
@@ -667,14 +667,9 @@ static int ich_pata_prereset(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no])) {
- ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
- ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
- return 0;
- }
-
+ if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->port_no]))
+ return -ENOENT;
ich_pata_cbl_detect(ap);
-
return ata_std_prereset(ap);
}
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index d14a48e75f1..03a0acff6cf 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -34,6 +34,13 @@ struct taskfile_array {
u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
};
+/*
+ * Helper - belongs in the PCI layer somewhere eventually
+ */
+static int is_pci_dev(struct device *dev)
+{
+ return (dev->bus == &pci_bus_type);
+}
/**
* sata_get_dev_handle - finds acpi_handle and PCI device.function
@@ -53,6 +60,9 @@ static int sata_get_dev_handle(struct device *dev, acpi_handle *handle,
struct pci_dev *pci_dev;
acpi_integer addr;
+ if (!is_pci_dev(dev))
+ return -ENODEV;
+
pci_dev = to_pci_dev(dev); /* NOTE: PCI-specific */
/* Please refer to the ACPI spec for the syntax of _ADR. */
addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
@@ -84,7 +94,12 @@ static int pata_get_dev_handle(struct device *dev, acpi_handle *handle,
acpi_status status;
struct acpi_device_info *dinfo = NULL;
int ret = -ENODEV;
- struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_dev *pdev;
+
+ if (!is_pci_dev(dev))
+ return -ENODEV;
+
+ pdev = to_pci_dev(dev);
bus = pdev->bus->number;
devnum = PCI_SLOT(pdev->devfn);
@@ -290,7 +305,7 @@ static int do_drive_get_GTF(struct ata_port *ap, int ix,
*gtf_address = 0UL;
*obj_loc = 0UL;
- if (noacpi)
+ if (libata_noacpi)
return 0;
if (ata_msg_probe(ap))
@@ -516,7 +531,7 @@ static int do_drive_set_taskfiles(struct ata_port *ap,
ata_dev_printk(atadev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
__FUNCTION__, ap->port_no);
- if (noacpi || !(ap->cbl == ATA_CBL_SATA))
+ if (libata_noacpi || !(ap->cbl == ATA_CBL_SATA))
return 0;
if (!ata_dev_enabled(atadev) || (ap->flags & ATA_FLAG_DISABLED))
@@ -559,7 +574,14 @@ int ata_acpi_exec_tfs(struct ata_port *ap)
unsigned long gtf_address;
unsigned long obj_loc;
- if (noacpi)
+ if (libata_noacpi)
+ return 0;
+ /*
+ * TBD - implement PATA support. For now,
+ * we should not run GTF on PATA devices since some
+ * PATA require execution of GTM/STM before GTF.
+ */
+ if (!(ap->cbl == ATA_CBL_SATA))
return 0;
for (ix = 0; ix < ATA_MAX_DEVICES; ix++) {
@@ -614,7 +636,7 @@ int ata_acpi_push_id(struct ata_port *ap, unsigned int ix)
struct acpi_object_list input;
union acpi_object in_params[1];
- if (noacpi)
+ if (libata_noacpi)
return 0;
if (ata_msg_probe(ap))
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index dc362fa01ca..0abd72d0dec 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -93,8 +93,8 @@ static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ;
module_param(ata_probe_timeout, int, 0444);
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
-int noacpi;
-module_param(noacpi, int, 0444);
+int libata_noacpi = 1;
+module_param_named(noacpi, libata_noacpi, int, 0444);
MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in suspend/resume when set");
MODULE_AUTHOR("Jeff Garzik");
@@ -826,7 +826,7 @@ static u64 ata_id_n_sectors(const u16 *id)
/**
* ata_id_to_dma_mode - Identify DMA mode from id block
* @dev: device to identify
- * @mode: mode to assume if we cannot tell
+ * @unknown: mode to assume if we cannot tell
*
* Set up the timing values for the device based upon the identify
* reported values for the DMA mode. This function is used by drivers
@@ -1784,6 +1784,13 @@ int ata_dev_configure(struct ata_device *dev)
dev->max_sectors = ATA_MAX_SECTORS;
}
+ if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
+ dev->max_sectors = min(ATA_MAX_SECTORS_128, dev->max_sectors);
+
+ /* limit ATAPI DMA to R/W commands only */
+ if (ata_device_blacklisted(dev) & ATA_HORKAGE_DMA_RW_ONLY)
+ dev->horkage |= ATA_HORKAGE_DMA_RW_ONLY;
+
if (ap->ops->dev_config)
ap->ops->dev_config(ap, dev);
@@ -3352,6 +3359,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA },
+ /* Weird ATAPI devices */
+ { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 |
+ ATA_HORKAGE_DMA_RW_ONLY },
+
/* Devices we expect to fail diagnostics */
/* Devices where NCQ should be avoided */
@@ -3359,6 +3370,15 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
/* http://thread.gmane.org/gmane.linux.ide/14907 */
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
+ /* NCQ is broken */
+ { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ },
+ /* NCQ hard hangs device under heavier load, needs hard power cycle */
+ { "Maxtor 6B250S0", "BANC1B70", ATA_HORKAGE_NONCQ },
+ /* Blacklist entries taken from Silicon Image 3124/3132
+ Windows driver .inf file - also several Linux problem reports */
+ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
+ { "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
+ { "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
/* Devices with NCQ limits */
@@ -3455,7 +3475,8 @@ static void ata_dev_xfermask(struct ata_device *dev)
"device is on DMA blacklist, disabling DMA\n");
}
- if ((host->flags & ATA_HOST_SIMPLEX) && host->simplex_claimed != ap) {
+ if ((host->flags & ATA_HOST_SIMPLEX) &&
+ host->simplex_claimed && host->simplex_claimed != ap) {
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by "
"other device, disabling DMA\n");
@@ -3669,6 +3690,26 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc)
struct ata_port *ap = qc->ap;
int rc = 0; /* Assume ATAPI DMA is OK by default */
+ /* some drives can only do ATAPI DMA on read/write */
+ if (unlikely(qc->dev->horkage & ATA_HORKAGE_DMA_RW_ONLY)) {
+ struct scsi_cmnd *cmd = qc->scsicmd;
+ u8 *scsicmd = cmd->cmnd;
+
+ switch (scsicmd[0]) {
+ case READ_10:
+ case WRITE_10:
+ case READ_12:
+ case WRITE_12:
+ case READ_6:
+ case WRITE_6:
+ /* atapi dma maybe ok */
+ break;
+ default:
+ /* turn off atapi dma */
+ return 1;
+ }
+ }
+
if (ap->ops->check_atapi_dma)
rc = ap->ops->check_atapi_dma(qc);
@@ -4712,8 +4753,8 @@ static void fill_result_tf(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
- ap->ops->tf_read(ap, &qc->result_tf);
qc->result_tf.flags = qc->tf.flags;
+ ap->ops->tf_read(ap, &qc->result_tf);
}
/**
@@ -5684,18 +5725,22 @@ static void ata_host_release(struct device *gendev, void *res)
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
- if (!ap)
- continue;
-
- if (ap->ops->port_stop)
+ if (ap && ap->ops->port_stop)
ap->ops->port_stop(ap);
-
- scsi_host_put(ap->scsi_host);
}
if (host->ops->host_stop)
host->ops->host_stop(host);
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+
+ if (ap)
+ scsi_host_put(ap->scsi_host);
+
+ host->ports[i] = NULL;
+ }
+
dev_set_drvdata(gendev, NULL);
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7349c3dbf77..39f556c0299 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -982,26 +982,27 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
* RETURNS:
* 0 on success, AC_ERR_* mask on failure
*/
-static unsigned int atapi_eh_request_sense(struct ata_device *dev,
- unsigned char *sense_buf)
+static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
{
+ struct ata_device *dev = qc->dev;
+ unsigned char *sense_buf = qc->scsicmd->sense_buffer;
struct ata_port *ap = dev->ap;
struct ata_taskfile tf;
u8 cdb[ATAPI_CDB_LEN];
DPRINTK("ATAPI request sense\n");
- ata_tf_init(dev, &tf);
-
/* FIXME: is this needed? */
memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
- /* XXX: why tf_read here? */
- ap->ops->tf_read(ap, &tf);
-
- /* fill these in, for the case where they are -not- overwritten */
+ /* initialize sense_buf with the error register,
+ * for the case where they are -not- overwritten
+ */
sense_buf[0] = 0x70;
- sense_buf[2] = tf.feature >> 4;
+ sense_buf[2] = qc->result_tf.feature >> 4;
+
+ /* some devices time out if garbage left in tf */
+ ata_tf_init(dev, &tf);
memset(cdb, 0, ATAPI_CDB_LEN);
cdb[0] = REQUEST_SENSE;
@@ -1165,8 +1166,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
case ATA_DEV_ATAPI:
if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
- tmp = atapi_eh_request_sense(qc->dev,
- qc->scsicmd->sense_buffer);
+ tmp = atapi_eh_request_sense(qc);
if (!tmp) {
/* ATA_QCFLAG_SENSE_VALID is used to
* tell atapi_qc_complete() that sense
@@ -1625,8 +1625,14 @@ static int ata_eh_reset(struct ata_port *ap, int classify,
rc = prereset(ap);
if (rc) {
if (rc == -ENOENT) {
- ata_port_printk(ap, KERN_DEBUG, "port disabled. ignoring.\n");
+ ata_port_printk(ap, KERN_DEBUG,
+ "port disabled. ignoring.\n");
ap->eh_context.i.action &= ~ATA_EH_RESET_MASK;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ classes[i] = ATA_DEV_NONE;
+
+ rc = 0;
} else
ata_port_printk(ap, KERN_ERR,
"prereset failed (errno=%d)\n", rc);
@@ -1737,12 +1743,17 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
{
struct ata_eh_context *ehc = &ap->eh_context;
struct ata_device *dev;
+ unsigned int new_mask = 0;
unsigned long flags;
int i, rc = 0;
DPRINTK("ENTER\n");
- for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ /* For PATA drive side cable detection to work, IDENTIFY must
+ * be done backwards such that PDIAG- is released by the slave
+ * device before the master device is identified.
+ */
+ for (i = ATA_MAX_DEVICES - 1; i >= 0; i--) {
unsigned int action, readid_flags = 0;
dev = &ap->device[i];
@@ -1754,13 +1765,13 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
if (action & ATA_EH_REVALIDATE && ata_dev_ready(dev)) {
if (ata_port_offline(ap)) {
rc = -EIO;
- break;
+ goto err;
}
ata_eh_about_to_do(ap, dev, ATA_EH_REVALIDATE);
rc = ata_dev_revalidate(dev, readid_flags);
if (rc)
- break;
+ goto err;
ata_eh_done(ap, dev, ATA_EH_REVALIDATE);
@@ -1778,40 +1789,53 @@ static int ata_eh_revalidate_and_attach(struct ata_port *ap,
rc = ata_dev_read_id(dev, &dev->class, readid_flags,
dev->id);
- if (rc == 0) {
- ehc->i.flags |= ATA_EHI_PRINTINFO;
- rc = ata_dev_configure(dev);
- ehc->i.flags &= ~ATA_EHI_PRINTINFO;
- } else if (rc == -ENOENT) {
+ switch (rc) {
+ case 0:
+ new_mask |= 1 << i;
+ break;
+ case -ENOENT:
/* IDENTIFY was issued to non-existent
* device. No need to reset. Just
* thaw and kill the device.
*/
ata_eh_thaw_port(ap);
dev->class = ATA_DEV_UNKNOWN;
- rc = 0;
- }
-
- if (rc) {
- dev->class = ATA_DEV_UNKNOWN;
break;
+ default:
+ dev->class = ATA_DEV_UNKNOWN;
+ goto err;
}
+ }
+ }
- if (ata_dev_enabled(dev)) {
- spin_lock_irqsave(ap->lock, flags);
- ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
- spin_unlock_irqrestore(ap->lock, flags);
+ /* Configure new devices forward such that user doesn't see
+ * device detection messages backwards.
+ */
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
- /* new device discovered, configure xfermode */
- ehc->i.flags |= ATA_EHI_SETMODE;
- }
- }
+ if (!(new_mask & (1 << i)))
+ continue;
+
+ ehc->i.flags |= ATA_EHI_PRINTINFO;
+ rc = ata_dev_configure(dev);
+ ehc->i.flags &= ~ATA_EHI_PRINTINFO;
+ if (rc)
+ goto err;
+
+ spin_lock_irqsave(ap->lock, flags);
+ ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ /* new device discovered, configure xfermode */
+ ehc->i.flags |= ATA_EHI_SETMODE;
}
- if (rc)
- *r_failed_dev = dev;
+ return 0;
- DPRINTK("EXIT\n");
+ err:
+ *r_failed_dev = dev;
+ DPRINTK("EXIT rc=%d\n", rc);
return rc;
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 6cc817a1020..e9364434182 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -333,7 +333,7 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg)
scsi_cmd[8] = args[3];
scsi_cmd[10] = args[4];
scsi_cmd[12] = args[5];
- scsi_cmd[13] = args[6] & 0x0f;
+ scsi_cmd[13] = args[6] & 0x4f;
scsi_cmd[14] = args[0];
/* Good values for timeout and retries? Values below
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index c42671493e8..1f1e3a51f85 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -56,7 +56,7 @@ extern struct workqueue_struct *ata_aux_wq;
extern int atapi_enabled;
extern int atapi_dmadir;
extern int libata_fua;
-extern int noacpi;
+extern int libata_noacpi;
extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 7ef834250a4..55cc293e748 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -208,7 +208,7 @@ static struct ata_port_operations cs5520_port_ops = {
static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
u8 pcicfg;
- void *iomap[5];
+ void __iomem *iomap[5];
static struct ata_probe_ent probe[2];
int ports = 0;
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index 9a0523b5c94..c6f0e192755 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -193,7 +193,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq)
- set_irq_type(irq, IRQT_HIGH);
+ set_irq_type(irq, IRQT_RISING);
/* Setup expansion bus chip selects */
*data->cs0_cfg = data->cs0_bits;
@@ -232,7 +232,6 @@ static __devexit int ixp4xx_pata_remove(struct platform_device *dev)
struct ata_host *host = platform_get_drvdata(dev);
ata_host_detach(host);
- platform_set_drvdata(dev, NULL);
return 0;
}
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index f5d88729ca7..882c36eaf29 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -329,7 +329,7 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv)
ae->dev = dev;
ae->irq = priv->ata_irq;
- aio->cmd_addr = 0; /* Don't have a classic reg block */
+ aio->cmd_addr = NULL; /* Don't have a classic reg block */
aio->altstatus_addr = &priv->ata_regs->tf_control;
aio->ctl_addr = &priv->ata_regs->tf_control;
aio->data_addr = &priv->ata_regs->tf_data;
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index acdc52cbe38..0a149339891 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -195,7 +195,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
/* Cases the state machine will not complete correctly without help */
if ((tf->flags & ATA_TFLAG_LBA48) || tf->protocol == ATA_PROT_ATAPI_DMA)
{
- len = qc->nbytes;
+ len = qc->nbytes / 2;
if (tf->flags & ATA_TFLAG_WRITE)
len |= 0x06000000;
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 3193a603d1a..1e21688bfcf 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -672,10 +672,6 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (rc)
return rc;
- rc = pci_request_regions(pdev, DRV_NAME);
- if (rc)
- return rc;
-
rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
if (rc)
return rc;
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 388d07fab5f..9d9670a9b11 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -874,8 +874,14 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
if (status & (NV_ADMA_STAT_DONE |
NV_ADMA_STAT_CPBERR)) {
- u32 check_commands = notifier | notifier_error;
+ u32 check_commands;
int pos, error = 0;
+
+ if(ata_tag_valid(ap->active_tag))
+ check_commands = 1 << ap->active_tag;
+ else
+ check_commands = ap->sactive;
+
/** Check CPBs for completed commands */
while ((pos = ffs(check_commands)) && !error) {
pos--;
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 75d96159965..5614df8c1ce 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -346,6 +346,7 @@ static const struct pci_device_id sil24_pci_tbl[] = {
{ PCI_VDEVICE(CMD, 0x3124), BID_SIL3124 },
{ PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 },
{ PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 },
+ { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 },
{ PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 },
{ PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 },
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 1879e0cd56a..a787f0d4a5b 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -354,7 +354,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
return -ENOMEM;
if (!(probe_ent->port_flags & SIS_FLAG_CFGSCR)) {
- void *mmio;
+ void __iomem *mmio;
mmio = pcim_iomap(pdev, SIS_SCR_PCI_BAR, 0);
if (!mmio)
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-30 21:24:36 +0000