summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/ahci.c2
-rw-r--r--drivers/ata/ahci_platform.c2
-rw-r--r--drivers/ata/libahci.c10
-rw-r--r--drivers/ata/libata-acpi.c14
-rw-r--r--drivers/ata/libata-eh.c6
-rw-r--r--drivers/ata/libata-scsi.c3
-rw-r--r--drivers/ata/libata.h4
-rw-r--r--drivers/ata/pata_isapnp.c2
-rw-r--r--drivers/ata/sata_promise.c2
9 files changed, 16 insertions, 29 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 9d715ae5ff6..8e28f923cf7 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1343,7 +1343,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
- printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+ dev_info(&pdev->dev, "SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 2daaee05cab..7d3b85385bf 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -184,7 +184,7 @@ static int ahci_probe(struct platform_device *pdev)
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
- printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
+ dev_info(dev, "SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index acfd0f71106..aaac4fb0d56 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -778,8 +778,16 @@ static void ahci_start_port(struct ata_port *ap)
rc = ap->ops->transmit_led_message(ap,
emp->led_state,
4);
+ /*
+ * If busy, give a breather but do not
+ * release EH ownership by using msleep()
+ * instead of ata_msleep(). EM Transmit
+ * bit is busy for the whole host and
+ * releasing ownership will cause other
+ * ports to fail the same way.
+ */
if (rc == -EBUSY)
- ata_msleep(ap, 1);
+ msleep(1);
else
break;
}
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 4ba8b040557..ab714d2ad97 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -1035,17 +1035,3 @@ void ata_acpi_on_disable(struct ata_device *dev)
{
ata_acpi_clear_gtf(dev);
}
-
-void ata_scsi_acpi_bind(struct ata_device *dev)
-{
- acpi_handle handle = ata_dev_acpi_handle(dev);
- if (handle)
- acpi_dev_pm_add_dependent(handle, &dev->sdev->sdev_gendev);
-}
-
-void ata_scsi_acpi_unbind(struct ata_device *dev)
-{
- acpi_handle handle = ata_dev_acpi_handle(dev);
- if (handle)
- acpi_dev_pm_remove_dependent(handle, &dev->sdev->sdev_gendev);
-}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index c69fcce505c..370462fa8e0 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1322,14 +1322,14 @@ void ata_eh_qc_complete(struct ata_queued_cmd *qc)
* should be retried. To be used from EH.
*
* SCSI midlayer limits the number of retries to scmd->allowed.
- * scmd->retries is decremented for commands which get retried
+ * scmd->allowed is incremented for commands which get retried
* due to unrelated failures (qc->err_mask is zero).
*/
void ata_eh_qc_retry(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *scmd = qc->scsicmd;
- if (!qc->err_mask && scmd->retries)
- scmd->retries--;
+ if (!qc->err_mask)
+ scmd->allowed++;
__ata_eh_qc_complete(qc);
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 97a0cef1295..db6dfcfa3e2 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3679,7 +3679,6 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
if (!IS_ERR(sdev)) {
dev->sdev = sdev;
scsi_device_put(sdev);
- ata_scsi_acpi_bind(dev);
} else {
dev->sdev = NULL;
}
@@ -3767,8 +3766,6 @@ static void ata_scsi_remove_dev(struct ata_device *dev)
struct scsi_device *sdev;
unsigned long flags;
- ata_scsi_acpi_unbind(dev);
-
/* Alas, we need to grab scan_mutex to ensure SCSI device
* state doesn't change underneath us and thus
* scsi_device_get() always succeeds. The mutex locking can
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index eeeb77845d4..45b5ab3a95d 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -121,8 +121,6 @@ extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
extern void ata_acpi_bind_port(struct ata_port *ap);
extern void ata_acpi_bind_dev(struct ata_device *dev);
extern acpi_handle ata_dev_acpi_handle(struct ata_device *dev);
-extern void ata_scsi_acpi_bind(struct ata_device *dev);
-extern void ata_scsi_acpi_unbind(struct ata_device *dev);
#else
static inline void ata_acpi_dissociate(struct ata_host *host) { }
static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
@@ -133,8 +131,6 @@ static inline void ata_acpi_set_state(struct ata_port *ap,
pm_message_t state) { }
static inline void ata_acpi_bind_port(struct ata_port *ap) {}
static inline void ata_acpi_bind_dev(struct ata_device *dev) {}
-static inline void ata_scsi_acpi_bind(struct ata_device *dev) {}
-static inline void ata_scsi_acpi_unbind(struct ata_device *dev) {}
#endif
/* libata-scsi.c */
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 4bceb8803a1..b33d1f99b3a 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -78,7 +78,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
ap->ioaddr.cmd_addr = cmd_addr;
- if (pnp_port_valid(idev, 1) == 0) {
+ if (pnp_port_valid(idev, 1)) {
ctl_addr = devm_ioport_map(&idev->dev,
pnp_port_start(idev, 1), 1);
ap->ioaddr.altstatus_addr = ctl_addr;
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 958ba2a420c..97f4acb54ad 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -2,7 +2,7 @@
* sata_promise.c - Promise SATA
*
* Maintained by: Tejun Heo <tj@kernel.org>
- * Mikael Pettersson <mikpe@it.uu.se>
+ * Mikael Pettersson
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*