summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/ahci.c331
-rw-r--r--drivers/ata/libata-core.c56
-rw-r--r--drivers/ata/libata-eh.c219
-rw-r--r--drivers/ata/libata-pmp.c13
-rw-r--r--drivers/ata/libata-scsi.c102
-rw-r--r--drivers/ata/libata-sff.c15
-rw-r--r--drivers/ata/libata.h2
-rw-r--r--drivers/ata/pata_bf54x.c6
-rw-r--r--drivers/ata/pata_legacy.c10
-rw-r--r--drivers/ata/pata_mpc52xx.c2
-rw-r--r--drivers/ata/pata_qdi.c2
-rw-r--r--drivers/ata/pata_scc.c2
-rw-r--r--drivers/ata/pata_winbond.c2
-rw-r--r--drivers/ata/sata_svw.c38
14 files changed, 674 insertions, 126 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 5e6468a7ca4..dc7596f028b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -56,6 +56,12 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)
static int ahci_enable_alpm(struct ata_port *ap,
enum link_pm policy);
static void ahci_disable_alpm(struct ata_port *ap);
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+ size_t size);
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size);
+#define MAX_SLOTS 8
enum {
AHCI_PCI_BAR = 5,
@@ -98,6 +104,8 @@ enum {
HOST_IRQ_STAT = 0x08, /* interrupt status */
HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
+ HOST_EM_LOC = 0x1c, /* Enclosure Management location */
+ HOST_EM_CTL = 0x20, /* Enclosure Management Control */
/* HOST_CTL bits */
HOST_RESET = (1 << 0), /* reset controller; self-clear */
@@ -105,6 +113,7 @@ enum {
HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
/* HOST_CAP bits */
+ HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
HOST_CAP_SSC = (1 << 14), /* Slumber capable */
HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
@@ -202,6 +211,11 @@ enum {
ATA_FLAG_IPM,
ICH_MAP = 0x90, /* ICH MAP register */
+
+ /* em_ctl bits */
+ EM_CTL_RST = (1 << 9), /* Reset */
+ EM_CTL_TM = (1 << 8), /* Transmit Message */
+ EM_CTL_ALHD = (1 << 26), /* Activity LED */
};
struct ahci_cmd_hdr {
@@ -219,12 +233,21 @@ struct ahci_sg {
__le32 flags_size;
};
+struct ahci_em_priv {
+ enum sw_activity blink_policy;
+ struct timer_list timer;
+ unsigned long saved_activity;
+ unsigned long activity;
+ unsigned long led_state;
+};
+
struct ahci_host_priv {
unsigned int flags; /* AHCI_HFLAG_* */
u32 cap; /* cap to use */
u32 port_map; /* port map to use */
u32 saved_cap; /* saved initial cap */
u32 saved_port_map; /* saved initial port_map */
+ u32 em_loc; /* enclosure management location */
};
struct ahci_port_priv {
@@ -240,6 +263,8 @@ struct ahci_port_priv {
unsigned int ncq_saw_dmas:1;
unsigned int ncq_saw_sdb:1;
u32 intr_mask; /* interrupts to enable */
+ struct ahci_em_priv em_priv[MAX_SLOTS];/* enclosure management info
+ * per PM slot */
};
static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
@@ -277,9 +302,20 @@ static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int ahci_pci_device_resume(struct pci_dev *pdev);
#endif
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf);
+static ssize_t ahci_activity_store(struct ata_device *dev,
+ enum sw_activity val);
+static void ahci_init_sw_activity(struct ata_link *link);
static struct device_attribute *ahci_shost_attrs[] = {
&dev_attr_link_power_management_policy,
+ &dev_attr_em_message_type,
+ &dev_attr_em_message,
+ NULL
+};
+
+static struct device_attribute *ahci_sdev_attrs[] = {
+ &dev_attr_sw_activity,
NULL
};
@@ -289,6 +325,7 @@ static struct scsi_host_template ahci_sht = {
.sg_tablesize = AHCI_MAX_SG,
.dma_boundary = AHCI_DMA_BOUNDARY,
.shost_attrs = ahci_shost_attrs,
+ .sdev_attrs = ahci_sdev_attrs,
};
static struct ata_port_operations ahci_ops = {
@@ -316,6 +353,10 @@ static struct ata_port_operations ahci_ops = {
.enable_pm = ahci_enable_alpm,
.disable_pm = ahci_disable_alpm,
+ .em_show = ahci_led_show,
+ .em_store = ahci_led_store,
+ .sw_activity_show = ahci_activity_show,
+ .sw_activity_store = ahci_activity_store,
#ifdef CONFIG_PM
.port_suspend = ahci_port_suspend,
.port_resume = ahci_port_resume,
@@ -561,6 +602,11 @@ static struct pci_driver ahci_pci_driver = {
#endif
};
+static int ahci_em_messages = 1;
+module_param(ahci_em_messages, int, 0444);
+/* add other LED protocol types when they become supported */
+MODULE_PARM_DESC(ahci_em_messages,
+ "Set AHCI Enclosure Management Message type (0 = disabled, 1 = LED");
static inline int ahci_nr_ports(u32 cap)
{
@@ -1031,11 +1077,28 @@ static void ahci_power_down(struct ata_port *ap)
static void ahci_start_port(struct ata_port *ap)
{
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_link *link;
+ struct ahci_em_priv *emp;
+
/* enable FIS reception */
ahci_start_fis_rx(ap);
/* enable DMA */
ahci_start_engine(ap);
+
+ /* turn on LEDs */
+ if (ap->flags & ATA_FLAG_EM) {
+ ata_port_for_each_link(link, ap) {
+ emp = &pp->em_priv[link->pmp];
+ ahci_transmit_led_message(ap, emp->led_state, 4);
+ }
+ }
+
+ if (ap->flags & ATA_FLAG_SW_ACTIVITY)
+ ata_port_for_each_link(link, ap)
+ ahci_init_sw_activity(link);
+
}
static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
@@ -1079,12 +1142,15 @@ static int ahci_reset_controller(struct ata_host *host)
readl(mmio + HOST_CTL); /* flush */
}
- /* reset must complete within 1 second, or
+ /*
+ * to perform host reset, OS should set HOST_RESET
+ * and poll until this bit is read to be "0".
+ * reset must complete within 1 second, or
* the hardware should be considered fried.
*/
- ssleep(1);
+ tmp = ata_wait_register(mmio + HOST_CTL, HOST_RESET,
+ HOST_RESET, 10, 1000);
- tmp = readl(mmio + HOST_CTL);
if (tmp & HOST_RESET) {
dev_printk(KERN_ERR, host->dev,
"controller reset failed (0x%x)\n", tmp);
@@ -1116,6 +1182,230 @@ static int ahci_reset_controller(struct ata_host *host)
return 0;
}
+static void ahci_sw_activity(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ if (!(link->flags & ATA_LFLAG_SW_ACTIVITY))
+ return;
+
+ emp->activity++;
+ if (!timer_pending(&emp->timer))
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(10));
+}
+
+static void ahci_sw_activity_blink(unsigned long arg)
+{
+ struct ata_link *link = (struct ata_link *)arg;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+ unsigned long led_message = emp->led_state;
+ u32 activity_led_state;
+
+ led_message &= 0xffff0000;
+ led_message |= ap->port_no | (link->pmp << 8);
+
+ /* check to see if we've had activity. If so,
+ * toggle state of LED and reset timer. If not,
+ * turn LED to desired idle state.
+ */
+ if (emp->saved_activity != emp->activity) {
+ emp->saved_activity = emp->activity;
+ /* get the current LED state */
+ activity_led_state = led_message & 0x00010000;
+
+ if (activity_led_state)
+ activity_led_state = 0;
+ else
+ activity_led_state = 1;
+
+ /* clear old state */
+ led_message &= 0xfff8ffff;
+
+ /* toggle state */
+ led_message |= (activity_led_state << 16);
+ mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
+ } else {
+ /* switch to idle */
+ led_message &= 0xfff8ffff;
+ if (emp->blink_policy == BLINK_OFF)
+ led_message |= (1 << 16);
+ }
+ ahci_transmit_led_message(ap, led_message, 4);
+}
+
+static void ahci_init_sw_activity(struct ata_link *link)
+{
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ /* init activity stats, setup timer */
+ emp->saved_activity = emp->activity = 0;
+ setup_timer(&emp->timer, ahci_sw_activity_blink, (unsigned long)link);
+
+ /* check our blink policy and set flag for link if it's enabled */
+ if (emp->blink_policy)
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
+}
+
+static int ahci_reset_em(struct ata_host *host)
+{
+ void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
+ u32 em_ctl;
+
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if ((em_ctl & EM_CTL_TM) || (em_ctl & EM_CTL_RST))
+ return -EINVAL;
+
+ writel(em_ctl | EM_CTL_RST, mmio + HOST_EM_CTL);
+ return 0;
+}
+
+static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
+ u32 em_ctl;
+ u32 message[] = {0, 0};
+ unsigned int flags;
+ int pmp;
+ struct ahci_em_priv *emp;
+
+ /* get the slot number from the message */
+ pmp = (state & 0x0000ff00) >> 8;
+ if (pmp < MAX_SLOTS)
+ emp = &pp->em_priv[pmp];
+ else
+ return -EINVAL;
+
+ spin_lock_irqsave(ap->lock, flags);
+
+ /*
+ * if we are still busy transmitting a previous message,
+ * do not allow
+ */
+ em_ctl = readl(mmio + HOST_EM_CTL);
+ if (em_ctl & EM_CTL_TM) {
+ spin_unlock_irqrestore(ap->lock, flags);
+ return -EINVAL;
+ }
+
+ /*
+ * create message header - this is all zero except for
+ * the message size, which is 4 bytes.
+ */
+ message[0] |= (4 << 8);
+
+ /* ignore 0:4 of byte zero, fill in port info yourself */
+ message[1] = ((state & 0xfffffff0) | ap->port_no);
+
+ /* write message to EM_LOC */
+ writel(message[0], mmio + hpriv->em_loc);
+ writel(message[1], mmio + hpriv->em_loc+4);
+
+ /* save off new led state for port/slot */
+ emp->led_state = message[1];
+
+ /*
+ * tell hardware to transmit the message
+ */
+ writel(em_ctl | EM_CTL_TM, mmio + HOST_EM_CTL);
+
+ spin_unlock_irqrestore(ap->lock, flags);
+ return size;
+}
+
+static ssize_t ahci_led_show(struct ata_port *ap, char *buf)
+{
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_link *link;
+ struct ahci_em_priv *emp;
+ int rc = 0;
+
+ ata_port_for_each_link(link, ap) {
+ emp = &pp->em_priv[link->pmp];
+ rc += sprintf(buf, "%lx\n", emp->led_state);
+ }
+ return rc;
+}
+
+static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
+ size_t size)
+{
+ int state;
+ int pmp;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp;
+
+ state = simple_strtoul(buf, NULL, 0);
+
+ /* get the slot number from the message */
+ pmp = (state & 0x0000ff00) >> 8;
+ if (pmp < MAX_SLOTS)
+ emp = &pp->em_priv[pmp];
+ else
+ return -EINVAL;
+
+ /* mask off the activity bits if we are in sw_activity
+ * mode, user should turn off sw_activity before setting
+ * activity led through em_message
+ */
+ if (emp->blink_policy)
+ state &= 0xfff8ffff;
+
+ return ahci_transmit_led_message(ap, state, size);
+}
+
+static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+ u32 port_led_state = emp->led_state;
+
+ /* save the desired Activity LED behavior */
+ if (val == OFF) {
+ /* clear LFLAG */
+ link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
+
+ /* set the LED to OFF */
+ port_led_state &= 0xfff80000;
+ port_led_state |= (ap->port_no | (link->pmp << 8));
+ ahci_transmit_led_message(ap, port_led_state, 4);
+ } else {
+ link->flags |= ATA_LFLAG_SW_ACTIVITY;
+ if (val == BLINK_OFF) {
+ /* set LED to ON for idle */
+ port_led_state &= 0xfff80000;
+ port_led_state |= (ap->port_no | (link->pmp << 8));
+ port_led_state |= 0x00010000; /* check this */
+ ahci_transmit_led_message(ap, port_led_state, 4);
+ }
+ }
+ emp->blink_policy = val;
+ return 0;
+}
+
+static ssize_t ahci_activity_show(struct ata_device *dev, char *buf)
+{
+ struct ata_link *link = dev->link;
+ struct ata_port *ap = link->ap;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
+
+ /* display the saved value of activity behavior for this
+ * disk.
+ */
+ return sprintf(buf, "%d\n", emp->blink_policy);
+}
+
static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
int port_no, void __iomem *mmio,
void __iomem *port_mmio)
@@ -1846,7 +2136,8 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
if (qc->tf.protocol == ATA_PROT_NCQ)
writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
- readl(port_mmio + PORT_CMD_ISSUE); /* flush */
+
+ ahci_sw_activity(qc->dev->link);
return 0;
}
@@ -2154,7 +2445,8 @@ static void ahci_print_info(struct ata_host *host)
dev_printk(KERN_INFO, &pdev->dev,
"flags: "
"%s%s%s%s%s%s%s"
- "%s%s%s%s%s%s%s\n"
+ "%s%s%s%s%s%s%s"
+ "%s\n"
,
cap & (1 << 31) ? "64bit " : "",
@@ -2171,7 +2463,8 @@ static void ahci_print_info(struct ata_host *host)
cap & (1 << 17) ? "pmp " : "",
cap & (1 << 15) ? "pio " : "",
cap & (1 << 14) ? "slum " : "",
- cap & (1 << 13) ? "part " : ""
+ cap & (1 << 13) ? "part " : "",
+ cap & (1 << 6) ? "ems ": ""
);
}
@@ -2291,6 +2584,24 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
+ if (ahci_em_messages && (hpriv->cap & HOST_CAP_EMS)) {
+ u8 messages;
+ void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
+ u32 em_loc = readl(mmio + HOST_EM_LOC);
+ u32 em_ctl = readl(mmio + HOST_EM_CTL);
+
+ messages = (em_ctl & 0x000f0000) >> 16;
+
+ /* we only support LED message type right now */
+ if ((messages & 0x01) && (ahci_em_messages == 1)) {
+ /* store em_loc */
+ hpriv->em_loc = ((em_loc >> 16) * 4);
+ pi.flags |= ATA_FLAG_EM;
+ if (!(em_ctl & EM_CTL_ALHD))
+ pi.flags |= ATA_FLAG_SW_ACTIVITY;
+ }
+ }
+
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
@@ -2304,6 +2615,9 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
host->iomap = pcim_iomap_table(pdev);
host->private_data = hpriv;
+ if (pi.flags & ATA_FLAG_EM)
+ ahci_reset_em(host);
+
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
@@ -2314,6 +2628,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* set initial link pm policy */
ap->pm_policy = NOT_AVAILABLE;
+ /* set enclosure management message type */
+ if (ap->flags & ATA_FLAG_EM)
+ ap->em_message_type = ahci_em_messages;
+
+
/* disabled/not-implemented port */
if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 303fc0d2b97..9bef1a84fe3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -54,7 +54,6 @@
#include <linux/completion.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
-#include <linux/jiffies.h>
#include <linux/scatterlist.h>
#include <linux/io.h>
#include <scsi/scsi.h>
@@ -145,7 +144,7 @@ static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CF
module_param_named(dma, libata_dma_mask, int, 0444);
MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)");
-static int ata_probe_timeout = ATA_TMOUT_INTERNAL / HZ;
+static int ata_probe_timeout;
module_param(ata_probe_timeout, int, 0444);
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
@@ -1533,7 +1532,7 @@ unsigned long ata_id_xfermask(const u16 *id)
* @ap: The ata_port to queue port_task for
* @fn: workqueue function to be scheduled
* @data: data for @fn to use
- * @delay: delay time for workqueue function
+ * @delay: delay time in msecs for workqueue function
*
* Schedule @fn(@data) for execution after @delay jiffies using
* port_task. There is one port_task per port and it's the
@@ -1552,7 +1551,7 @@ void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
ap->port_task_data = data;
/* may fail if ata_port_flush_task() in progress */
- queue_delayed_work(ata_wq, &ap->port_task, delay);
+ queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay));
}
/**
@@ -1612,6 +1611,7 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
struct ata_link *link = dev->link;
struct ata_port *ap = link->ap;
u8 command = tf->command;
+ int auto_timeout = 0;
struct ata_queued_cmd *qc;
unsigned int tag, preempted_tag;
u32 preempted_sactive, preempted_qc_active;
@@ -1684,8 +1684,14 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
spin_unlock_irqrestore(ap->lock, flags);
- if (!timeout)
- timeout = ata_probe_timeout * 1000 / HZ;
+ if (!timeout) {
+ if (ata_probe_timeout)
+ timeout = ata_probe_timeout * 1000;
+ else {
+ timeout = ata_internal_cmd_timeout(dev, command);
+ auto_timeout = 1;
+ }
+ }
rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
@@ -1761,6 +1767,9 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
spin_unlock_irqrestore(ap->lock, flags);
+ if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
+ ata_internal_cmd_timed_out(dev, command);
+
return err_mask;
}
@@ -3319,7 +3328,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link))
{
unsigned long start = jiffies;
- unsigned long nodev_deadline = start + ATA_TMOUT_FF_WAIT;
+ unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
int warned = 0;
if (time_after(nodev_deadline, deadline))
@@ -3387,7 +3396,7 @@ int ata_wait_ready(struct ata_link *link, unsigned long deadline,
int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link))
{
- msleep(ATA_WAIT_AFTER_RESET_MSECS);
+ msleep(ATA_WAIT_AFTER_RESET);
return ata_wait_ready(link, deadline, check_ready);
}
@@ -3417,13 +3426,13 @@ int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
int sata_link_debounce(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
{
- unsigned long interval_msec = params[0];
- unsigned long duration = msecs_to_jiffies(params[1]);
+ unsigned long interval = params[0];
+ unsigned long duration = params[1];
unsigned long last_jiffies, t;
u32 last, cur;
int rc;
- t = jiffies + msecs_to_jiffies(params[2]);
+ t = ata_deadline(jiffies, params[2]);
if (time_before(t, deadline))
deadline = t;
@@ -3435,7 +3444,7 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params,
last_jiffies = jiffies;
while (1) {
- msleep(interval_msec);
+ msleep(interval);
if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
return rc;
cur &= 0xf;
@@ -3444,7 +3453,8 @@ int sata_link_debounce(struct ata_link *link, const unsigned long *params,
if (cur == last) {
if (cur == 1 && time_before(jiffies, deadline))
continue;
- if (time_after(jiffies, last_jiffies + duration))
+ if (time_after(jiffies,
+ ata_deadline(last_jiffies, duration)))
return 0;
continue;
}
@@ -3636,7 +3646,8 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
if (check_ready) {
unsigned long pmp_deadline;
- pmp_deadline = jiffies + ATA_TMOUT_PMP_SRST_WAIT;
+ pmp_deadline = ata_deadline(jiffies,
+ ATA_TMOUT_PMP_SRST_WAIT);
if (time_after(pmp_deadline, deadline))
pmp_deadline = deadline;
ata_wait_ready(link, pmp_deadline, check_ready);
@@ -6073,8 +6084,6 @@ static void __init ata_parse_force_param(void)
static int __init ata_init(void)
{
- ata_probe_timeout *= HZ;
-
ata_parse_force_param();
ata_wq = create_workqueue("ata");
@@ -6127,8 +6136,8 @@ int ata_ratelimit(void)
* @reg: IO-mapped register
* @mask: Mask to apply to read register value
* @val: Wait condition
- * @interval_msec: polling interval in milliseconds
- * @timeout_msec: timeout in milliseconds
+ * @interval: polling interval in milliseconds
+ * @timeout: timeout in milliseconds
*
* Waiting for some bits of register to change is a common
* operation for ATA controllers. This function reads 32bit LE
@@ -6146,10 +6155,9 @@ int ata_ratelimit(void)
* The final register value.
*/
u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
- unsigned long interval_msec,
- unsigned long timeout_msec)
+ unsigned long interval, unsigned long timeout)
{
- unsigned long timeout;
+ unsigned long deadline;
u32 tmp;
tmp = ioread32(reg);
@@ -6158,10 +6166,10 @@ u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
* preceding writes reach the controller before starting to
* eat away the timeout.
*/
- timeout = jiffies + (timeout_msec * HZ) / 1000;
+ deadline = ata_deadline(jiffies, timeout);
- while ((tmp & mask) == val && time_before(jiffies, timeout)) {
- msleep(interval_msec);
+ while ((tmp & mask) == val && time_before(jiffies, deadline)) {
+ msleep(interval);
tmp = ioread32(reg);
}
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 7894d83ea1e..58bdc538d22 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -66,15 +66,19 @@ enum {
ATA_ECAT_DUBIOUS_TOUT_HSM = 6,
ATA_ECAT_DUBIOUS_UNK_DEV = 7,
ATA_ECAT_NR = 8,
-};
-/* Waiting in ->prereset can never be reliable. It's sometimes nice
- * to wait there but it can't be depended upon; otherwise, we wouldn't
- * be resetting. Just give it enough time for most drives to spin up.
- */
-enum {
- ATA_EH_PRERESET_TIMEOUT = 10 * HZ,
- ATA_EH_FASTDRAIN_INTERVAL = 3 * HZ,
+ ATA_EH_CMD_DFL_TIMEOUT = 5000,
+
+ /* always put at least this amount of time between resets */
+ ATA_EH_RESET_COOL_DOWN = 5000,
+
+ /* Waiting in ->prereset can never be reliable. It's
+ * sometimes nice to wait there but it can't be depended upon;
+ * otherwise, we wouldn't be resetting. Just give it enough
+ * time for most drives to spin up.
+ */
+ ATA_EH_PRERESET_TIMEOUT = 10000,
+ ATA_EH_FASTDRAIN_INTERVAL = 3000,
};
/* The following table determines how we sequence resets. Each entry
@@ -84,12 +88,59 @@ enum {
* are mostly for error handling, hotplug and retarded devices.
*/
static const unsigned long ata_eh_reset_timeouts[] = {
- 10 * HZ, /* most drives spin up by 10sec */
- 10 * HZ, /* > 99% working drives spin up before 20sec */
- 35 * HZ, /* give > 30 secs of idleness for retarded devices */
- 5 * HZ, /* and sweet one last chance */
- /* > 1 min has elapsed, give up */
+ 10000, /* most drives spin up by 10sec */
+ 10000, /* > 99% working drives spin up before 20sec */
+ 35000, /* give > 30 secs of idleness for retarded devices */
+ 5000, /* and sweet one last chance */
+ ULONG_MAX, /* > 1 min has elapsed, give up */
+};
+
+static const unsigned long ata_eh_identify_timeouts[] = {
+ 5000, /* covers > 99% of successes and not too boring on failures */
+ 10000, /* combined time till here is enough even for media access */
+ 30000, /* for true idiots */
+ ULONG_MAX,
+};
+
+static const unsigned long ata_eh_other_timeouts[] = {
+ 5000, /* same rationale as identify timeout */
+ 10000, /* ditto */
+ /* but no merciful 30sec for other commands, it just isn't worth it */
+ ULONG_MAX,
+};
+
+struct ata_eh_cmd_timeout_ent {
+ const u8 *commands;
+ const unsigned long *timeouts;
+};
+
+/* The following table determines timeouts to use for EH internal
+ * commands. Each table entry is a command class and matches the
+ * commands the entry applies to and the timeout table to use.
+ *
+ * On the retry after a command timed out, the next timeout value from
+ * the table is used. If the table doesn't contain further entries,
+ * the last value is used.
+ *
+ * ehc->cmd_timeout_idx keeps track of which timeout to use per
+ * command class, so if SET_FEATURES times out on the first try, the
+ * next try will use the second timeout value only for that class.
+ */
+#define CMDS(cmds...) (const u8 []){ cmds, 0 }
+static const struct ata_eh_cmd_timeout_ent
+ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = {
+ { .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI),
+ .timeouts = ata_eh_identify_timeouts, },
+ { .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT),
+ .timeouts = ata_eh_other_timeouts, },
+ { .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT),
+ .timeouts = ata_eh_other_timeouts, },
+ { .commands = CMDS(ATA_CMD_SET_FEATURES),
+ .timeouts = ata_eh_other_timeouts, },
+ { .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS),
+ .timeouts = ata_eh_other_timeouts, },
};
+#undef CMDS
static void __ata_port_freeze(struct ata_port *ap);
#ifdef CONFIG_PM
@@ -236,6 +287,73 @@ void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
#endif /* CONFIG_PCI */
+static int ata_lookup_timeout_table(u8 cmd)
+{
+ int i;
+
+ for (i = 0; i < ATA_EH_CMD_TIMEOUT_TABLE_SIZE; i++) {
+ const u8 *cur;
+
+ for (cur = ata_eh_cmd_timeout_table[i].commands; *cur; cur++)
+ if (*cur == cmd)
+ return i;
+ }
+
+ return -1;
+}
+
+/**
+ * ata_internal_cmd_timeout - determine timeout for an internal command
+ * @dev: target device
+ * @cmd: internal command to be issued
+ *
+ * Determine timeout for internal command @cmd for @dev.
+ *
+ * LOCKING:
+ * EH context.
+ *
+ * RETURNS:
+ * Determined timeout.
+ */
+unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd)
+{
+ struct ata_eh_context *ehc = &dev->link->eh_context;
+ int ent = ata_lookup_timeout_table(cmd);
+ int idx;
+
+ if (ent < 0)
+ return ATA_EH_CMD_DFL_TIMEOUT;
+
+ idx = ehc->cmd_timeout_idx[dev->devno][ent];
+ return ata_eh_cmd_timeout_table[ent].timeouts[idx];
+}
+
+/**
+ * ata_internal_cmd_timed_out - notification for internal command timeout
+ * @dev: target device
+ * @cmd: internal command which timed out
+ *
+ * Notify EH that internal command @cmd for @dev timed out. This
+ * function should be called only for commands whose timeouts are
+ * determined using ata_internal_cmd_timeout().
+ *
+ * LOCKING:
+ * EH context.
+ */
+void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd)
+{
+ struct ata_eh_context *ehc = &dev->link->eh_context;
+ int ent = ata_lookup_timeout_table(cmd);
+ int idx;
+
+ if (ent < 0)
+ return;
+
+ idx = ehc->cmd_timeout_idx[dev->devno][ent];
+ if (ata_eh_cmd_timeout_table[ent].timeouts[idx + 1] != ULONG_MAX)
+ ehc->cmd_timeout_idx[dev->devno][ent]++;
+}
+
static void ata_ering_record(struct ata_ering *ering, unsigned int eflags,
unsigned int err_mask)
{
@@ -486,6 +604,9 @@ void ata_scsi_error(struct Scsi_Host *host)
if (ata_ncq_enabled(dev))
ehc->saved_ncq_enabled |= 1 << devno;
}
+
+ /* set last reset timestamp to some time in the past */
+ ehc->last_reset = jiffies - 60 * HZ;
}
ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
@@ -641,7 +762,7 @@ void ata_eh_fastdrain_timerfn(unsigned long arg)
/* some qcs have finished, give it another chance */
ap->fastdrain_cnt = cnt;
ap->fastdrain_timer.expires =
- jiffies + ATA_EH_FASTDRAIN_INTERVAL;
+ ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL);
add_timer(&ap->fastdrain_timer);
}
@@ -681,7 +802,8 @@ static void ata_eh_set_pending(struct ata_port *ap, int fastdrain)
/* activate fast drain */
ap->fastdrain_cnt = cnt;
- ap->fastdrain_timer.expires = jiffies + ATA_EH_FASTDRAIN_INTERVAL;
+ ap->fastdrain_timer.expires =
+ ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL);
add_timer(&ap->fastdrain_timer);
}
@@ -1238,6 +1360,7 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
* atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
* @dev: device to perform REQUEST_SENSE to
* @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
+ * @dfl_sense_key: default sense key to use
*
* Perform ATAPI REQUEST_SENSE after the device reported CHECK
* SENSE. This function is EH helper.
@@ -1248,13 +1371,13 @@ static int ata_eh_read_log_10h(struct ata_device *dev,
* RETURNS:
* 0 on success, AC_ERR_* mask on failure
*/
-static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
+static unsigned int atapi_eh_request_sense(struct ata_device *dev,
+ u8 *sense_buf, u8 dfl_sense_key)
{
- struct ata_device *dev = qc->dev;
- unsigned char *sense_buf = qc->scsicmd->sense_buffer;
+ u8 cdb[ATAPI_CDB_LEN] =
+ { REQUEST_SENSE, 0, 0, 0, SCSI_SENSE_BUFFERSIZE, 0 };
struct ata_port *ap = dev->link->ap;
struct ata_taskfile tf;
- u8 cdb[ATAPI_CDB_LEN];
DPRINTK("ATAPI request sense\n");
@@ -1265,15 +1388,11 @@ static unsigned int atapi_eh_request_sense(struct ata_queued_cmd *qc)
* for the case where they are -not- overwritten
*/
sense_buf[0] = 0x70;
- sense_buf[2] = qc->result_tf.feature >> 4;
+ sense_buf[2] = dfl_sense_key;
/* some devices time out if garbage left in tf */
ata_tf_init(dev, &tf);
- memset(cdb, 0, ATAPI_CDB_LEN);
- cdb[0] = REQUEST_SENSE;
- cdb[4] = SCSI_SENSE_BUFFERSIZE;
-
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf.command = ATA_CMD_PACKET;
@@ -1445,7 +1564,9 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
case ATA_DEV_ATAPI:
if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
- tmp = atapi_eh_request_sense(qc);
+ tmp = atapi_eh_request_sense(qc->dev,
+ qc->scsicmd->sense_buffer,
+ qc->result_tf.feature >> 4);
if (!tmp) {
/* ATA_QCFLAG_SENSE_VALID is used to
* tell atapi_qc_complete() that sense
@@ -2071,13 +2192,12 @@ int ata_eh_reset(struct ata_link *link, int classify,
ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
{
- const int max_tries = ARRAY_SIZE(ata_eh_reset_timeouts);
struct ata_port *ap = link->ap;
struct ata_eh_context *ehc = &link->eh_context;
unsigned int *classes = ehc->classes;
unsigned int lflags = link->flags;
int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
- int try = 0;
+ int max_tries = 0, try = 0;
struct ata_device *dev;
unsigned long deadline, now;
ata_reset_fn_t reset;
@@ -2088,11 +2208,20 @@ int ata_eh_reset(struct ata_link *link, int classify,
/*
* Prepare to reset
*/
+ while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX)
+ max_tries++;
+
+ now = jiffies;
+ deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
+ if (time_before(now, deadline))
+ schedule_timeout_uninterruptible(deadline - now);
+
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_RESETTING;
spin_unlock_irqrestore(ap->lock, flags);
ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
+ ehc->last_reset = jiffies;
ata_link_for_each_dev(dev, link) {
/* If we issue an SRST then an ATA drive (not ATAPI)
@@ -2125,7 +2254,8 @@ int ata_eh_reset(struct ata_link *link, int classify,
}
if (prereset) {
- rc = prereset(link, jiffies + ATA_EH_PRERESET_TIMEOUT);
+ rc = prereset(link,
+ ata_deadline(jiffies, ATA_EH_PRERESET_TIMEOUT));
if (rc) {
if (rc == -ENOENT) {
ata_link_printk(link, KERN_DEBUG,
@@ -2157,10 +2287,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
/*
* Perform reset
*/
+ ehc->last_reset = jiffies;
if (ata_is_host_link(link))
ata_eh_freeze_port(ap);
- deadline = jiffies + ata_eh_reset_timeouts[try++];
+ deadline = ata_deadline(jiffies, ata_eh_reset_timeouts[try++]);
if (reset) {
if (verbose)
@@ -2277,6 +2408,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
/* reset successful, schedule revalidation */
ata_eh_done(link, NULL, ATA_EH_RESET);
+ ehc->last_reset = jiffies;
ehc->i.action |= ATA_EH_REVALIDATE;
rc = 0;
@@ -2303,9 +2435,9 @@ int ata_eh_reset(struct ata_link *link, int classify,
if (time_before(now, deadline)) {
unsigned long delta = deadline - now;
- ata_link_printk(link, KERN_WARNING, "reset failed "
- "(errno=%d), retrying in %u secs\n",
- rc, (jiffies_to_msecs(delta) + 999) / 1000);
+ ata_link_printk(link, KERN_WARNING,
+ "reset failed (errno=%d), retrying in %u secs\n",
+ rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000));
while (delta)
delta = schedule_timeout_uninterruptible(delta);
@@ -2583,8 +2715,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
ata_eh_detach_dev(dev);
/* schedule probe if necessary */
- if (ata_eh_schedule_probe(dev))
+ if (ata_eh_schedule_probe(dev)) {
ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
+ memset(ehc->cmd_timeout_idx[dev->devno], 0,
+ sizeof(ehc->cmd_timeout_idx[dev->devno]));
+ }
return 1;
} else {
@@ -2622,7 +2757,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
{
struct ata_link *link;
struct ata_device *dev;
- int nr_failed_devs, nr_disabled_devs;
+ int nr_failed_devs;
int rc;
unsigned long flags;
@@ -2665,7 +2800,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
retry:
rc = 0;
nr_failed_devs = 0;
- nr_disabled_devs = 0;
/* if UNLOADING, finish immediately */
if (ap->pflags & ATA_PFLAG_UNLOADING)
@@ -2732,8 +2866,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
dev_fail:
nr_failed_devs++;
- if (ata_eh_handle_dev_fail(dev, rc))
- nr_disabled_devs++;
+ ata_eh_handle_dev_fail(dev, rc);
if (ap->pflags & ATA_PFLAG_FROZEN) {
/* PMP reset requires working host port.
@@ -2745,18 +2878,8 @@ dev_fail:
}
}
- if (nr_failed_devs) {
- if (nr_failed_devs != nr_disabled_devs) {
- ata_port_printk(ap, KERN_WARNING, "failed to recover "
- "some devices, retrying in 5 secs\n");
- ssleep(5);
- } else {
- /* no device left to recover, repeat fast */
- msleep(500);
- }
-
+ if (nr_failed_devs)
goto retry;
- }
out:
if (rc && r_failed_link)
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 7daf4c0f621..b65db309c18 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -727,19 +727,12 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
}
if (tries) {
- int sleep = ehc->i.flags & ATA_EHI_DID_RESET;
-
/* consecutive revalidation failures? speed down */
if (reval_failed)
sata_down_spd_limit(link);
else
reval_failed = 1;
- ata_dev_printk(dev, KERN_WARNING,
- "retrying reset%s\n",
- sleep ? " in 5 secs" : "");
- if (sleep)
- ssleep(5);
ehc->i.action |= ATA_EH_RESET;
goto retry;
} else {
@@ -785,7 +778,8 @@ static int sata_pmp_eh_handle_disabled_links(struct ata_port *ap)
* SError.N working.
*/
sata_link_hardreset(link, sata_deb_timing_normal,
- jiffies + ATA_TMOUT_INTERNAL_QUICK, NULL, NULL);
+ ata_deadline(jiffies, ATA_TMOUT_INTERNAL_QUICK),
+ NULL, NULL);
/* unconditionally clear SError.N */
rc = sata_scr_write(link, SCR_ERROR, SERR_PHYRDY_CHG);
@@ -990,10 +984,7 @@ static int sata_pmp_eh_recover(struct ata_port *ap)
goto retry;
if (--pmp_tries) {
- ata_port_printk(ap, KERN_WARNING,
- "failed to recover PMP, retrying in 5 secs\n");
pmp_ehc->i.action |= ATA_EH_RESET;
- ssleep(5);
goto retry;
}
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 57a43649a46..f3b4b15a8dc 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -190,6 +190,85 @@ static void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq)
scsi_build_sense_buffer(0, cmd->sense_buffer, sk, asc, ascq);
}
+static ssize_t
+ata_scsi_em_message_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ if (ap->ops->em_store && (ap->flags & ATA_FLAG_EM))
+ return ap->ops->em_store(ap, buf, count);
+ return -EINVAL;
+}
+
+static ssize_t
+ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+
+ if (ap->ops->em_show && (ap->flags & ATA_FLAG_EM))
+ return ap->ops->em_show(ap, buf);
+ return -EINVAL;
+}
+DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO,
+ ata_scsi_em_message_show, ata_scsi_em_message_store);
+EXPORT_SYMBOL_GPL(dev_attr_em_message);
+
+static ssize_t
+ata_scsi_em_message_type_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+
+ return snprintf(buf, 23, "%d\n", ap->em_message_type);
+}
+DEVICE_ATTR(em_message_type, S_IRUGO,
+ ata_scsi_em_message_type_show, NULL);
+EXPORT_SYMBOL_GPL(dev_attr_em_message_type);
+
+static ssize_t
+ata_scsi_activity_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
+
+ if (ap->ops->sw_activity_show && (ap->flags & ATA_FLAG_SW_ACTIVITY))
+ return ap->ops->sw_activity_show(atadev, buf);
+ return -EINVAL;
+}
+
+static ssize_t
+ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
+ struct ata_device *atadev = ata_scsi_find_dev(ap, sdev);
+ enum sw_activity val;
+ int rc;
+
+ if (ap->ops->sw_activity_store && (ap->flags & ATA_FLAG_SW_ACTIVITY)) {
+ val = simple_strtoul(buf, NULL, 0);
+ switch (val) {
+ case OFF: case BLINK_ON: case BLINK_OFF:
+ rc = ap->ops->sw_activity_store(atadev, val);
+ if (!rc)
+ return count;
+ else
+ return rc;
+ }
+ }
+ return -EINVAL;
+}
+DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show,
+ ata_scsi_activity_store);
+EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
+
static void ata_scsi_invalid_field(struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
@@ -885,7 +964,8 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
/* set the min alignment and padding */
blk_queue_update_dma_alignment(sdev->request_queue,
ATA_DMA_PAD_SZ - 1);
- blk_queue_dma_pad(sdev->request_queue, ATA_DMA_PAD_SZ - 1);
+ blk_queue_update_dma_pad(sdev->request_queue,
+ ATA_DMA_PAD_SZ - 1);
/* configure draining */
buf = kmalloc(ATAPI_MAX_DRAIN, q->bounce_gfp | GFP_KERNEL);
@@ -1778,7 +1858,9 @@ static unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf)
const u8 pages[] = {
0x00, /* page 0x00, this page */
0x80, /* page 0x80, unit serial no page */
- 0x83 /* page 0x83, device ident page */
+ 0x83, /* page 0x83, device ident page */
+ 0x89, /* page 0x89, ata info page */
+ 0xb1, /* page 0xb1, block device characteristics page */
};
rbuf[3] = sizeof(pages); /* number of supported VPD pages */
@@ -1899,6 +1981,19 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
return 0;
}
+static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
+{
+ rbuf[1] = 0xb1;
+ rbuf[3] = 0x3c;
+ if (ata_id_major_version(args->id) > 7) {
+ rbuf[4] = args->id[217] >> 8;
+ rbuf[5] = args->id[217];
+ rbuf[7] = args->id[168] & 0xf;
+ }
+
+ return 0;
+}
+
/**
* ata_scsiop_noop - Command handler that simply returns success.
* @args: device IDENTIFY data / SCSI command of interest.
@@ -2920,6 +3015,9 @@ void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
case 0x89:
ata_scsi_rbuf_fill(&args, ata_scsiop_inq_89);
break;
+ case 0xb1:
+ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_b1);
+ break;
default:
ata_scsi_invalid_field(cmd, done);
break;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index c0908c22548..304fdc6f1dc 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -345,8 +345,8 @@ void ata_sff_dma_pause(struct ata_port *ap)
/**
* ata_sff_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
- * @tmout_pat: impatience timeout
- * @tmout: overall timeout
+ * @tmout_pat: impatience timeout in msecs
+ * @tmout: overall timeout in msecs
*
* Sleep until ATA Status register bit BSY clears,
* or a timeout occurs.
@@ -365,7 +365,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
status = ata_sff_busy_wait(ap, ATA_BUSY, 300);
timer_start = jiffies;
- timeout = timer_start + tmout_pat;
+ timeout = ata_deadline(timer_start, tmout_pat);
while (status != 0xff && (status & ATA_BUSY) &&
time_before(jiffies, timeout)) {
msleep(50);
@@ -377,7 +377,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
"port is slow to respond, please be patient "
"(Status 0x%x)\n", status);
- timeout = timer_start + tmout;
+ timeout = ata_deadline(timer_start, tmout);
while (status != 0xff && (status & ATA_BUSY) &&
time_before(jiffies, timeout)) {
msleep(50);
@@ -390,7 +390,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
if (status & ATA_BUSY) {
ata_port_printk(ap, KERN_ERR, "port failed to respond "
"(%lu secs, Status 0x%x)\n",
- tmout / HZ, status);
+ DIV_ROUND_UP(tmout, 1000), status);
return -EBUSY;
}
@@ -1888,7 +1888,7 @@ int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
unsigned int dev1 = devmask & (1 << 1);
int rc, ret = 0;
- msleep(ATA_WAIT_AFTER_RESET_MSECS);
+ msleep(ATA_WAIT_AFTER_RESET);
/* always check readiness of the master device */
rc = ata_sff_wait_ready(link, deadline);
@@ -2371,7 +2371,8 @@ void ata_bus_reset(struct ata_port *ap)
/* issue bus reset */
if (ap->flags & ATA_FLAG_SRST) {
- rc = ata_bus_softreset(ap, devmask, jiffies + 40 * HZ);
+ rc = ata_bus_softreset(ap, devmask,
+ ata_deadline(jiffies, 40000));
if (rc && rc != -ENODEV)
goto err_out;
}
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 1cf803adbc9..f6f9c28ec7f 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -151,6 +151,8 @@ extern void ata_scsi_dev_rescan(struct work_struct *work);
extern int ata_bus_probe(struct ata_port *ap);
/* libata-eh.c */
+extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd);
+extern void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd);
extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
extern void ata_scsi_error(struct Scsi_Host *host);
extern void ata_port_wait_eh(struct ata_port *ap);
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 55516103626..d3932901a3b 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1011,7 +1011,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
void __iomem *base = (void __iomem *)ap->ioaddr.ctl_addr;
unsigned int dev0 = devmask & (1 << 0);
unsigned int dev1 = devmask & (1 << 1);
- unsigned long timeout;
+ unsigned long deadline;
/* if device 0 was found in ata_devchk, wait for its
* BSY bit to clear
@@ -1022,7 +1022,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
/* if device 1 was found in ata_devchk, wait for
* register access, then wait for BSY to clear
*/
- timeout = jiffies + ATA_TMOUT_BOOT;
+ deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
while (dev1) {
u8 nsect, lbal;
@@ -1031,7 +1031,7 @@ static void bfin_bus_post_reset(struct ata_port *ap, unsigned int devmask)
lbal = read_atapi_register(base, ATA_REG_LBAL);
if ((nsect == 1) && (lbal == 1))
break;
- if (time_after(jiffies, timeout)) {
+ if (time_after(jiffies, deadline)) {
dev1 = 0;
break;
}
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index fe7cc8ed4ea..bc037ffce20 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -305,7 +305,7 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev,
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- u32 pad;
+ __le32 pad;
if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
@@ -746,14 +746,12 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf,
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- u32 pad;
+ __le32 pad;
if (rw == WRITE) {
memcpy(&pad, buf + buflen - slop, slop);
- pad = le32_to_cpu(pad);
- iowrite32(pad, ap->ioaddr.data_addr);
+ iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
} else {
- pad = ioread32(ap->ioaddr.data_addr);
- pad = cpu_to_le32(pad);
+ pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
}
}
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index bc79df6e7cb..a9e827356d0 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -16,10 +16,10 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/libata.h>
+#include <linux/of_platform.h>
#include <asm/types.h>
#include <asm/prom.h>
-#include <asm/of_platform.h>
#include <asm/mpc52xx.h>
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 97e5b090d7c..63b7a1c165a 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -137,7 +137,7 @@ static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- u32 pad;
+ __le32 pad;
if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index bbf5aa345e6..16673d16857 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -696,7 +696,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
if (reg & INTSTS_BMSINT) {
unsigned int classes;
- unsigned long deadline = jiffies + ATA_TMOUT_BOOT;
+ unsigned long deadline = ata_deadline(jiffies, ATA_TMOUT_BOOT);
printk(KERN_WARNING "%s: Internal Bus Error\n", DRV_NAME);
out_be32(bmid_base + SCC_DMA_INTST, INTSTS_BMSINT);
/* TBD: SW reset */
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 474528f8fe3..a7606b044a6 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -105,7 +105,7 @@ static unsigned int winbond_data_xfer(struct ata_device *dev,
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
if (unlikely(slop)) {
- u32 pad;
+ __le32 pad;
if (rw == READ) {
pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
memcpy(buf + buflen - slop, &pad, slop);
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 16aa6839aa5..fb13b82aacb 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -253,21 +253,29 @@ static void k2_bmdma_start_mmio(struct ata_queued_cmd *qc)
/* start host DMA transaction */
dmactl = readb(mmio + ATA_DMA_CMD);
writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD);
- /* There is a race condition in certain SATA controllers that can
- be seen when the r/w command is given to the controller before the
- host DMA is started. On a Read command, the controller would initiate
- the command to the drive even before it sees the DMA start. When there
- are very fast drives connected to the controller, or when the data request
- hits in the drive cache, there is the possibility that the drive returns a part
- or all of the requested data to the controller before the DMA start is issued.
- In this case, the controller would become confused as to what to do with the data.
- In the worst case when all the data is returned back to the controller, the
- controller could hang. In other cases it could return partial data returning
- in data corruption. This problem has been seen in PPC systems and can also appear
- on an system with very fast disks, where the SATA controller is sitting behind a
- number of bridges, and hence there is significant latency between the r/w command
- and the start command. */
- /* issue r/w command if the access is to ATA*/
+ /* This works around possible data corruption.
+
+ On certain SATA controllers that can be seen when the r/w
+ command is given to the controller before the host DMA is
+ started.
+
+ On a Read command, the controller would initiate the
+ command to the drive even before it sees the DMA
+ start. When there are very fast drives connected to the
+ controller, or when the data request hits in the drive
+ cache, there is the possibility that the drive returns a
+ part or all of the requested data to the controller before
+ the DMA start is issued. In this case, the controller
+ would become confused as to what to do with the data. In
+ the worst case when all the data is returned back to the
+ controller, the controller could hang. In other cases it
+ could return partial data returning in data
+ corruption. This problem has been seen in PPC systems and
+ can also appear on an system with very fast disks, where
+ the SATA controller is sitting behind a number of bridges,
+ and hence there is significant latency between the r/w
+ command and the start command. */
+ /* issue r/w command if the access is to ATA */
if (qc->tf.protocol == ATA_PROT_DMA)
ap->ops->sff_exec_command(ap, &qc->tf);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-01 17:29:01 +0000