summaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/Kconfig3
-rw-r--r--drivers/ata/Makefile1
-rw-r--r--drivers/ata/ahci_platform.c44
-rw-r--r--drivers/ata/ata_piix.c153
-rw-r--r--drivers/ata/libata-core.c2
-rw-r--r--drivers/ata/libata-eh.c5
-rw-r--r--drivers/ata/libata-sff.c117
-rw-r--r--drivers/ata/pata_ali.c2
-rw-r--r--drivers/ata/pata_arasan_cf.c6
-rw-r--r--drivers/ata/pata_artop.c107
-rw-r--r--drivers/ata/pata_at91.c7
-rw-r--r--drivers/ata/pata_atiixp.c35
-rw-r--r--drivers/ata/pata_cmd64x.c44
-rw-r--r--drivers/ata/pata_cs5535.c16
-rw-r--r--drivers/ata/pata_efar.c22
-rw-r--r--drivers/ata/pata_hpt366.c35
-rw-r--r--drivers/ata/pata_it8213.c24
-rw-r--r--drivers/ata/pata_legacy.c129
-rw-r--r--drivers/ata/pata_mpc52xx.c2
-rw-r--r--drivers/ata/pata_of_platform.c6
-rw-r--r--drivers/ata/pata_pdc2027x.c30
-rw-r--r--drivers/ata/pata_qdi.c366
-rw-r--r--drivers/ata/pata_rdc.c16
-rw-r--r--drivers/ata/pata_sc1200.c14
-rw-r--r--drivers/ata/pata_scc.c14
-rw-r--r--drivers/ata/pata_serverworks.c127
-rw-r--r--drivers/ata/pata_sil680.c94
-rw-r--r--drivers/ata/pata_sis.c154
-rw-r--r--drivers/ata/pata_sl82c105.c37
-rw-r--r--drivers/ata/pata_via.c49
-rw-r--r--drivers/ata/sata_mv.c16
-rw-r--r--drivers/ata/sata_sil24.c4
32 files changed, 693 insertions, 988 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 5987e0ba8c2..6bdedd7cca2 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -820,7 +820,7 @@ config PATA_PLATFORM
config PATA_OF_PLATFORM
tristate "OpenFirmware platform device PATA support"
- depends on PATA_PLATFORM && PPC_OF
+ depends on PATA_PLATFORM && OF
help
This option enables support for generic directly connected ATA
devices commonly found on embedded systems with OpenFirmware
@@ -831,6 +831,7 @@ config PATA_OF_PLATFORM
config PATA_QDI
tristate "QDI VLB PATA support"
depends on ISA
+ select PATA_LEGACY
help
Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 9550d691fd1..6ece5b7231a 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -88,7 +88,6 @@ obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o
obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o
-obj-$(CONFIG_PATA_QDI) += pata_qdi.o
obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o
obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o
obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 6fef1fa75c5..c03277d3774 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,41 @@
#include <linux/ahci_platform.h>
#include "ahci.h"
+enum ahci_type {
+ AHCI, /* standard platform ahci */
+ IMX53_AHCI, /* ahci on i.mx53 */
+};
+
+static struct platform_device_id ahci_devtype[] = {
+ {
+ .name = "ahci",
+ .driver_data = AHCI,
+ }, {
+ .name = "imx53-ahci",
+ .driver_data = IMX53_AHCI,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, ahci_devtype);
+
+
+static const struct ata_port_info ahci_port_info[] = {
+ /* by features */
+ [AHCI] = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
+ [IMX53_AHCI] = {
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_pmp_retry_srst_ops,
+ },
+};
+
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT("ahci_platform"),
};
@@ -31,12 +66,8 @@ static int __init ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev->platform_data;
- struct ata_port_info pi = {
- .flags = AHCI_FLAG_COMMON,
- .pio_mask = ATA_PIO4,
- .udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
- };
+ const struct platform_device_id *id = platform_get_device_id(pdev);
+ struct ata_port_info pi = ahci_port_info[id->driver_data];
const struct ata_port_info *ppi[] = { &pi, NULL };
struct ahci_host_priv *hpriv;
struct ata_host *host;
@@ -177,6 +208,7 @@ static struct platform_driver ahci_driver = {
.name = "ahci",
.owner = THIS_MODULE,
},
+ .id_table = ahci_devtype,
};
static int __init ahci_init(void)
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 43107e9415d..69ac373c72a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -113,6 +113,8 @@ enum {
PIIX_PATA_FLAGS = ATA_FLAG_SLAVE_POSS,
PIIX_SATA_FLAGS = ATA_FLAG_SATA | PIIX_FLAG_CHECKINTR,
+ PIIX_FLAG_PIO16 = (1 << 30), /*support 16bit PIO only*/
+
PIIX_80C_PRI = (1 << 5) | (1 << 4),
PIIX_80C_SEC = (1 << 7) | (1 << 6),
@@ -147,6 +149,7 @@ enum piix_controller_ids {
ich8m_apple_sata, /* locks up on second port enable */
tolapai_sata,
piix_pata_vmw, /* PIIX4 for VMware, spurious DMA_ERR */
+ ich8_sata_snb,
};
struct piix_map_db {
@@ -177,6 +180,7 @@ static int piix_sidpr_scr_write(struct ata_link *link,
static int piix_sidpr_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
unsigned hints);
static bool piix_irq_check(struct ata_port *ap);
+static int piix_port_start(struct ata_port *ap);
#ifdef CONFIG_PM
static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
static int piix_pci_device_resume(struct pci_dev *pdev);
@@ -298,21 +302,21 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* SATA Controller IDE (PCH) */
{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (CPT) */
- { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (CPT) */
- { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (CPT) */
{ 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (CPT) */
{ 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (PBG) */
- { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (PBG) */
{ 0x8086, 0x1d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Panther Point) */
- { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1e00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (Panther Point) */
- { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+ { 0x8086, 0x1e01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
/* SATA Controller IDE (Panther Point) */
{ 0x8086, 0x1e08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
/* SATA Controller IDE (Panther Point) */
@@ -338,6 +342,7 @@ static struct scsi_host_template piix_sht = {
static struct ata_port_operations piix_sata_ops = {
.inherits = &ata_bmdma32_port_ops,
.sff_irq_check = piix_irq_check,
+ .port_start = piix_port_start,
};
static struct ata_port_operations piix_pata_ops = {
@@ -478,6 +483,7 @@ static const struct piix_map_db *piix_map_db_table[] = {
[ich8_2port_sata] = &ich8_2port_map_db,
[ich8m_apple_sata] = &ich8m_apple_map_db,
[tolapai_sata] = &tolapai_map_db,
+ [ich8_sata_snb] = &ich8_map_db,
};
static struct ata_port_info piix_port_info[] = {
@@ -606,6 +612,19 @@ static struct ata_port_info piix_port_info[] = {
.port_ops = &piix_vmw_ops,
},
+ /*
+ * some Sandybridge chipsets have broken 32 mode up to now,
+ * see https://bugzilla.kernel.org/show_bug.cgi?id=40592
+ */
+ [ich8_sata_snb] =
+ {
+ .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR | PIIX_FLAG_PIO16,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &piix_sata_ops,
+ },
+
};
static struct pci_bits piix_enable_bits[] = {
@@ -649,6 +668,14 @@ static const struct ich_laptop ich_laptop[] = {
{ 0, }
};
+static int piix_port_start(struct ata_port *ap)
+{
+ if (!(ap->flags & PIIX_FLAG_PIO16))
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+
+ return ata_bmdma_port_start(ap);
+}
+
/**
* ich_pata_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
@@ -704,22 +731,11 @@ static int piix_pata_prereset(struct ata_link *link, unsigned long deadline)
static DEFINE_SPINLOCK(piix_lock);
-/**
- * piix_set_piomode - Initialize host controller PATA PIO timings
- * @ap: Port whose timings we are configuring
- * @adev: um
- *
- * Set PIO mode for device, in host controller PCI config space.
- *
- * LOCKING:
- * None (inherited from caller).
- */
-
-static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void piix_set_timings(struct ata_port *ap, struct ata_device *adev,
+ u8 pio)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned long flags;
- unsigned int pio = adev->pio_mode - XFER_PIO_0;
unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
@@ -744,10 +760,16 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
control |= 1; /* TIME1 enable */
if (ata_pio_need_iordy(adev))
control |= 2; /* IE enable */
-
/* Intel specifies that the PPE functionality is for disk only */
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ /*
+ * If the drive MWDMA is faster than it can do PIO then
+ * we must force PIO into PIO0
+ */
+ if (adev->pio_mode < XFER_PIO_0 + pio)
+ /* Enable DMA timing only */
+ control |= 8; /* PIO cycles in PIO0 */
spin_lock_irqsave(&piix_lock, flags);
@@ -759,8 +781,6 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
if (is_slave) {
/* clear TIME1|IE1|PPE1|DTE1 */
master_data &= 0xff0f;
- /* Enable SITRE (separate slave timing register) */
- master_data |= 0x4000;
/* enable PPE1, IE1 and TIME1 as needed */
master_data |= (control << 4);
pci_read_config_byte(dev, slave_port, &slave_data);
@@ -778,6 +798,9 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
(timings[pio][0] << 12) |
(timings[pio][1] << 8);
}
+
+ /* Enable SITRE (separate slave timing register) */
+ master_data |= 0x4000;
pci_write_config_word(dev, master_port, master_data);
if (is_slave)
pci_write_config_byte(dev, slave_port, slave_data);
@@ -795,6 +818,22 @@ static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
+ * piix_set_piomode - Initialize host controller PATA PIO timings
+ * @ap: Port whose timings we are configuring
+ * @adev: Drive in question
+ *
+ * Set PIO mode for device, in host controller PCI config space.
+ *
+ * LOCKING:
+ * None (inherited from caller).
+ */
+
+static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+ piix_set_timings(ap, adev, adev->pio_mode - XFER_PIO_0);
+}
+
+/**
* do_pata_set_dmamode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
* @adev: Drive in question
@@ -810,31 +849,20 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
unsigned long flags;
- u8 master_port = ap->port_no ? 0x42 : 0x40;
- u16 master_data;
u8 speed = adev->dma_mode;
int devid = adev->devno + 2 * ap->port_no;
u8 udma_enable = 0;
- static const /* ISP RTC */
- u8 timings[][2] = { { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- spin_lock_irqsave(&piix_lock, flags);
-
- pci_read_config_word(dev, master_port, &master_data);
- if (ap->udma_mask)
- pci_read_config_byte(dev, 0x48, &udma_enable);
-
if (speed >= XFER_UDMA_0) {
- unsigned int udma = adev->dma_mode - XFER_UDMA_0;
+ unsigned int udma = speed - XFER_UDMA_0;
u16 udma_timing;
u16 ideconf;
int u_clock, u_speed;
+ spin_lock_irqsave(&piix_lock, flags);
+
+ pci_read_config_byte(dev, 0x48, &udma_enable);
+
/*
* UDMA is handled by a combination of clock switching and
* selection of dividers
@@ -867,56 +895,21 @@ static void do_pata_set_dmamode(struct ata_port *ap, struct ata_device *adev, in
performance (WR_PingPong_En) */
pci_write_config_word(dev, 0x54, ideconf);
}
+
+ pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&piix_lock, flags);
} else {
- /*
- * MWDMA is driven by the PIO timings. We must also enable
- * IORDY unconditionally along with TIME1. PPE has already
- * been set when the PIO timing was set.
- */
- unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
- unsigned int control;
- u8 slave_data;
+ /* MWDMA is driven by the PIO timings. */
+ unsigned int mwdma = speed - XFER_MW_DMA_0;
const unsigned int needed_pio[3] = {
XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
};
int pio = needed_pio[mwdma] - XFER_PIO_0;
- control = 3; /* IORDY|TIME1 */
-
- /* If the drive MWDMA is faster than it can do PIO then
- we must force PIO into PIO0 */
-
- if (adev->pio_mode < needed_pio[mwdma])
- /* Enable DMA timing only */
- control |= 8; /* PIO cycles in PIO0 */
-
- if (adev->devno) { /* Slave */
- master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */
- master_data |= control << 4;
- pci_read_config_byte(dev, 0x44, &slave_data);
- slave_data &= (ap->port_no ? 0x0f : 0xf0);
- /* Load the matching timing */
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0);
- pci_write_config_byte(dev, 0x44, slave_data);
- } else { /* Master */
- master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY
- and master timing bits */
- master_data |= control;
- master_data |=
- (timings[pio][0] << 12) |
- (timings[pio][1] << 8);
- }
-
- if (ap->udma_mask)
- udma_enable &= ~(1 << devid);
-
- pci_write_config_word(dev, master_port, master_data);
+ /* XFER_PIO_0 is never used currently */
+ piix_set_timings(ap, adev, pio);
}
- /* Don't scribble on 0x48 if the controller does not support UDMA */
- if (ap->udma_mask)
- pci_write_config_byte(dev, 0x48, udma_enable);
-
- spin_unlock_irqrestore(&piix_lock, flags);
}
/**
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4a3a5ae7bb4..32fc41c1da3 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2938,7 +2938,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
memset(&p, 0, sizeof(p));
- if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
+ if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) {
if (speed <= XFER_PIO_2)
p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO];
else if ((speed <= XFER_PIO_4) ||
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ed16fbedaab..c021186736e 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2532,8 +2532,7 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
return reset(link, classes, deadline);
}
-static int ata_eh_followup_srst_needed(struct ata_link *link,
- int rc, const unsigned int *classes)
+static int ata_eh_followup_srst_needed(struct ata_link *link, int rc)
{
if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
return 0;
@@ -2726,7 +2725,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
/* perform follow-up SRST if necessary */
if (reset == hardreset &&
- ata_eh_followup_srst_needed(link, rc, classes)) {
+ ata_eh_followup_srst_needed(link, rc)) {
reset = softreset;
if (!reset) {
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index c24127dd6ef..239bfa67d03 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -569,7 +569,7 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
/* Transfer trailing byte, if any. */
if (unlikely(buflen & 0x01)) {
- unsigned char pad[2];
+ unsigned char pad[2] = { };
/* Point buf to the tail of buffer */
buf += buflen - 1;
@@ -628,7 +628,7 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
/* Transfer trailing bytes, if any */
if (unlikely(slop)) {
- unsigned char pad[4];
+ unsigned char pad[4] = { };
/* Point buf to the tail of buffer */
buf += buflen - slop;
@@ -678,7 +678,7 @@ unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
unsigned int consumed;
local_irq_save(flags);
- consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+ consumed = ata_sff_data_xfer32(dev, buf, buflen, rw);
local_irq_restore(flags);
return consumed;
@@ -2507,31 +2507,10 @@ static const struct ata_port_info *ata_sff_find_valid_pi(
return NULL;
}
-/**
- * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
- * @pdev: Controller to be initialized
- * @ppi: array of port_info, must be enough for two ports
- * @sht: scsi_host_template to use when registering the host
- * @host_priv: host private_data
- * @hflag: host flags
- *
- * This is a helper function which can be called from a driver's
- * xxx_init_one() probe function if the hardware uses traditional
- * IDE taskfile registers and is PIO only.
- *
- * ASSUMPTION:
- * Nobody makes a single channel controller that appears solely as
- * the secondary legacy port on PCI.
- *
- * LOCKING:
- * Inherited from PCI layer (may sleep).
- *
- * RETURNS:
- * Zero on success, negative on errno-based value on error.
- */
-int ata_pci_sff_init_one(struct pci_dev *pdev,
- const struct ata_port_info * const *ppi,
- struct scsi_host_template *sht, void *host_priv, int hflag)
+static int ata_pci_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const *ppi,
+ struct scsi_host_template *sht, void *host_priv,
+ int hflags, bool bmdma)
{
struct device *dev = &pdev->dev;
const struct ata_port_info *pi;
@@ -2553,14 +2532,22 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
if (rc)
goto out;
- /* prepare and activate SFF host */
- rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+ if (bmdma)
+ /* prepare and activate BMDMA host */
+ rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
+ else
+ /* prepare and activate SFF host */
+ rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
if (rc)
goto out;
host->private_data = host_priv;
- host->flags |= hflag;
+ host->flags |= hflags;
- rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
+ if (bmdma) {
+ pci_set_master(pdev);
+ rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+ } else
+ rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
out:
if (rc == 0)
devres_remove_group(&pdev->dev, NULL);
@@ -2569,6 +2556,35 @@ out:
return rc;
}
+
+/**
+ * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
+ * @pdev: Controller to be initialized
+ * @ppi: array of port_info, must be enough for two ports
+ * @sht: scsi_host_template to use when registering the host
+ * @host_priv: host private_data
+ * @hflag: host flags
+ *
+ * This is a helper function which can be called from a driver's
+ * xxx_init_one() probe function if the hardware uses traditional
+ * IDE taskfile registers and is PIO only.
+ *
+ * ASSUMPTION:
+ * Nobody makes a single channel controller that appears solely as
+ * the secondary legacy port on PCI.
+ *
+ * LOCKING:
+ * Inherited from PCI layer (may sleep).
+ *
+ * RETURNS:
+ * Zero on success, negative on errno-based value on error.
+ */
+int ata_pci_sff_init_one(struct pci_dev *pdev,
+ const struct ata_port_info * const *ppi,
+ struct scsi_host_template *sht, void *host_priv, int hflag)
+{
+ return ata_pci_init_one(pdev, ppi, sht, host_priv, hflag, 0);
+}
EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
#endif /* CONFIG_PCI */
@@ -3286,42 +3302,7 @@ int ata_pci_bmdma_init_one(struct pci_dev *pdev,
struct scsi_host_template *sht, void *host_priv,
int hflags)
{
- struct device *dev = &pdev->dev;
- const struct ata_port_info *pi;
- struct ata_host *host = NULL;
- int rc;
-
- DPRINTK("ENTER\n");
-
- pi = ata_sff_find_valid_pi(ppi);
- if (!pi) {
- dev_err(&pdev->dev, "no valid port_info specified\n");
- return -EINVAL;
- }
-
- if (!devres_open_group(dev, NULL, GFP_KERNEL))
- return -ENOMEM;
-
- rc = pcim_enable_device(pdev);
- if (rc)
- goto out;
-
- /* prepare and activate BMDMA host */
- rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
- if (rc)
- goto out;
- host->private_data = host_priv;
- host->flags |= hflags;
-
- pci_set_master(pdev);
- rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
- out:
- if (rc == 0)
- devres_remove_group(&pdev->dev, NULL);
- else
- devres_release_group(&pdev->dev, NULL);
-
- return rc;
+ return ata_pci_init_one(pdev, ppi, sht, host_priv, hflags, 1);
}
EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index cadd67998ba..61da0694aec 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -56,7 +56,7 @@ static const struct dmi_system_id cable_dmi_table[] = {
},
},
{
- .ident = "Toshiba Satelite S1800-814",
+ .ident = "Toshiba Satellite S1800-814",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 719bb73a73e..e8574bba3ee 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -922,8 +922,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int arasan_cf_suspend(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = dev_get_drvdata(dev);
struct arasan_cf_dev *acdev = host->ports[0]->private_data;
if (acdev->dma_chan) {
@@ -937,8 +936,7 @@ static int arasan_cf_suspend(struct device *dev)
static int arasan_cf_resume(struct device *dev)
{
- struct platform_device *pdev = to_platform_device(dev);
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = dev_get_drvdata(dev);
struct arasan_cf_dev *acdev = host->ports[0]->private_data;
cf_init(acdev);
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 78a93b69095..4b8b22efc00 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -2,7 +2,7 @@
* pata_artop.c - ARTOP ATA controller driver
*
* (C) 2006 Red Hat
- * (C) 2007 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2011 Bartlomiej Zolnierkiewicz
*
* Based in part on drivers/ide/pci/aec62xx.c
* Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
@@ -28,7 +28,7 @@
#include <linux/ata.h>
#define DRV_NAME "pata_artop"
-#define DRV_VERSION "0.4.5"
+#define DRV_VERSION "0.4.6"
/*
* The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -39,31 +39,15 @@
static int clock = 0;
-static int artop6210_pre_reset(struct ata_link *link, unsigned long deadline)
-{
- struct ata_port *ap = link->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- const struct pci_bits artop_enable_bits[] = {
- { 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */
- { 0x4AU, 1U, 0x04UL, 0x04UL }, /* port 1 */
- };
-
- if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
- return -ENOENT;
-
- return ata_sff_prereset(link, deadline);
-}
-
/**
- * artop6260_pre_reset - check for 40/80 pin
+ * artop62x0_pre_reset - probe begin
* @link: link
* @deadline: deadline jiffies for the operation
*
- * The ARTOP hardware reports the cable detect bits in register 0x49.
* Nothing complicated needed here.
*/
-static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
+static int artop62x0_pre_reset(struct ata_link *link, unsigned long deadline)
{
static const struct pci_bits artop_enable_bits[] = {
{ 0x4AU, 1U, 0x02UL, 0x02UL }, /* port 0 */
@@ -73,7 +57,7 @@ static int artop6260_pre_reset(struct ata_link *link, unsigned long deadline)
struct ata_port *ap = link->ap;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- /* Odd numbered device ids are the units with enable bits (the -R cards) */
+ /* Odd numbered device ids are the units with enable bits. */
if ((pdev->device & 1) &&
!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
return -ENOENT;
@@ -317,7 +301,7 @@ static struct ata_port_operations artop6210_ops = {
.cable_detect = ata_cable_40wire,
.set_piomode = artop6210_set_piomode,
.set_dmamode = artop6210_set_dmamode,
- .prereset = artop6210_pre_reset,
+ .prereset = artop62x0_pre_reset,
.qc_defer = artop6210_qc_defer,
};
@@ -326,9 +310,36 @@ static struct ata_port_operations artop6260_ops = {
.cable_detect = artop6260_cable_detect,
.set_piomode = artop6260_set_piomode,
.set_dmamode = artop6260_set_dmamode,
- .prereset = artop6260_pre_reset,
+ .prereset = artop62x0_pre_reset,
};
+static void atp8xx_fixup(struct pci_dev *pdev)
+{
+ if (pdev->device == 0x0005)
+ /* BIOS may have left us in UDMA, clear it before libata probe */
+ pci_write_config_byte(pdev, 0x54, 0);
+ else if (pdev->device == 0x0008 || pdev->device == 0x0009) {
+ u8 reg;
+
+ /* Mac systems come up with some registers not set as we
+ will need them */
+
+ /* Clear reset & test bits */
+ pci_read_config_byte(pdev, 0x49, &reg);
+ pci_write_config_byte(pdev, 0x49, reg & ~0x30);
+
+ /* PCI latency must be > 0x80 for burst mode, tweak it
+ * if required.
+ */
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &reg);
+ if (reg <= 0x80)
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
+
+ /* Enable IRQ output and burst mode */
+ pci_read_config_byte(pdev, 0x4a, &reg);
+ pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
+ }
+}
/**
* artop_init_one - Register ARTOP ATA PCI device with kernel services
@@ -383,42 +394,22 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
if (rc)
return rc;
- if (id->driver_data == 0) { /* 6210 variant */
+ if (id->driver_data == 0) /* 6210 variant */
ppi[0] = &info_6210;
- /* BIOS may have left us in UDMA, clear it before libata probe */
- pci_write_config_byte(pdev, 0x54, 0);
- }
else if (id->driver_data == 1) /* 6260 */
ppi[0] = &info_626x;
else if (id->driver_data == 2) { /* 6280 or 6280 + fast */
unsigned long io = pci_resource_start(pdev, 4);
- u8 reg;
ppi[0] = &info_628x;
if (inb(io) & 0x10)
ppi[0] = &info_628x_fast;
- /* Mac systems come up with some registers not set as we
- will need them */
-
- /* Clear reset & test bits */
- pci_read_config_byte(pdev, 0x49, &reg);
- pci_write_config_byte(pdev, 0x49, reg & ~ 0x30);
-
- /* PCI latency must be > 0x80 for burst mode, tweak it
- * if required.
- */
- pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &reg);
- if (reg <= 0x80)
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x90);
-
- /* Enable IRQ output and burst mode */
- pci_read_config_byte(pdev, 0x4a, &reg);
- pci_write_config_byte(pdev, 0x4a, (reg & ~0x01) | 0x80);
-
}
BUG_ON(ppi[0] == NULL);
+ atp8xx_fixup(pdev);
+
return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
}
@@ -432,11 +423,32 @@ static const struct pci_device_id artop_pci_tbl[] = {
{ } /* terminate list */
};
+#ifdef CONFIG_PM
+static int atp8xx_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ atp8xx_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct pci_driver artop_pci_driver = {
.name = DRV_NAME,
.id_table = artop_pci_tbl,
.probe = artop_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = atp8xx_reinit_one,
+#endif
};
static int __init artop_init(void)
@@ -452,9 +464,8 @@ static void __exit artop_exit(void)
module_init(artop_init);
module_exit(artop_exit);
-MODULE_AUTHOR("Alan Cox");
+MODULE_AUTHOR("Alan Cox, Bartlomiej Zolnierkiewicz");
MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, artop_pci_tbl);
MODULE_VERSION(DRV_VERSION);
-
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 960c7257139..a76f24a8e5d 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -30,7 +30,7 @@
#include <mach/at91sam9_smc.h>
#include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
#define DRV_NAME "pata_at91"
#define DRV_VERSION "0.3"
@@ -414,10 +414,13 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
host->private_data = info;
- return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
+ ret = ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
irq ? ata_sff_interrupt : NULL,
irq_flags, &pata_at91_sht);
+ if (!ret)
+ return 0;
+
err_put:
clk_put(info->mck);
return ret;
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 43755616dc5..be1aa1486d3 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -49,6 +49,31 @@ static int atiixp_cable_detect(struct ata_port *ap)
static DEFINE_SPINLOCK(atiixp_lock);
/**
+ * atiixp_prereset - perform reset handling
+ * @link: ATA link
+ * @deadline: deadline jiffies for the operation
+ *
+ * Reset sequence checking enable bits to see which ports are
+ * active.
+ */
+
+static int atiixp_prereset(struct ata_link *link, unsigned long deadline)
+{
+ static const struct pci_bits atiixp_enable_bits[] = {
+ { 0x48, 1, 0x01, 0x00 },
+ { 0x48, 1, 0x08, 0x00 }
+ };
+
+ struct ata_port *ap = link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (!pci_test_config_bits(pdev, &atiixp_enable_bits[ap->port_no]))
+ return -ENOENT;
+
+ return ata_sff_prereset(link, deadline);
+}
+
+/**
* atiixp_set_pio_timing - set initial PIO mode data
* @ap: ATA interface
* @adev: ATA device
@@ -221,6 +246,7 @@ static struct ata_port_operations atiixp_port_ops = {
.bmdma_start = atiixp_bmdma_start,
.bmdma_stop = atiixp_bmdma_stop,
+ .prereset = atiixp_prereset,
.cable_detect = atiixp_cable_detect,
.set_piomode = atiixp_set_piomode,
.set_dmamode = atiixp_set_dmamode,
@@ -235,16 +261,7 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
.udma_mask = ATA_UDMA5,
.port_ops = &atiixp_port_ops
};
- static const struct pci_bits atiixp_enable_bits[] = {
- { 0x48, 1, 0x01, 0x00 },
- { 0x48, 1, 0x08, 0x00 }
- };
const struct ata_port_info *ppi[] = { &info, &info };
- int i;
-
- for (i = 0; i < 2; i++)
- if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
- ppi[i] = &ata_dummy_port_info;
return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
ATA_HOST_PARALLEL_SCAN);
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 7bafc16cf5e..e1fb39a74ce 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -82,7 +82,7 @@ static int cmd648_cable_detect(struct ata_port *ap)
}
/**
- * cmd64x_set_piomode - set PIO and MWDMA timing
+ * cmd64x_set_timing - set PIO and MWDMA timing
* @ap: ATA interface
* @adev: ATA device
* @mode: mode
@@ -288,6 +288,22 @@ static struct ata_port_operations cmd648_port_ops = {
.cable_detect = cmd648_cable_detect,
};
+static void cmd64x_fixup(struct pci_dev *pdev)
+{
+ u8 mrdmode;
+
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
+ pci_read_config_byte(pdev, MRDMODE, &mrdmode);
+ mrdmode &= ~0x30; /* IRQ set up */
+ mrdmode |= 0x02; /* Memory read line enable */
+ pci_write_config_byte(pdev, MRDMODE, mrdmode);
+
+ /* PPC specific fixup copied from old driver */
+#ifdef CONFIG_PPC
+ pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
+#endif
+}
+
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info cmd_info[6] = {
@@ -336,7 +352,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
&cmd_info[id->driver_data],
NULL
};
- u8 mrdmode, reg;
+ u8 reg;
int rc;
struct pci_dev *bridge = pdev->bus->self;
/* mobility split bridges don't report enabled ports correctly */
@@ -368,11 +384,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
cntrl_ch0_ok = 0;
}
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
- pci_read_config_byte(pdev, MRDMODE, &mrdmode);
- mrdmode &= ~ 0x30; /* IRQ set up */
- mrdmode |= 0x02; /* Memory read line enable */
- pci_write_config_byte(pdev, MRDMODE, mrdmode);
+ cmd64x_fixup(pdev);
/* check for enabled ports */
pci_read_config_byte(pdev, CNTRL, &reg);
@@ -388,13 +400,6 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
ppi[1] = &ata_dummy_port_info;
}
- /* Force PIO 0 here.. */
-
- /* PPC specific fixup copied from old driver */
-#ifdef CONFIG_PPC
- pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
-#endif
-
return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
}
@@ -402,21 +407,14 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
static int cmd64x_reinit_one(struct pci_dev *pdev)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
- u8 mrdmode;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
- pci_read_config_byte(pdev, MRDMODE, &mrdmode);
- mrdmode &= ~ 0x30; /* IRQ set up */
- mrdmode |= 0x02; /* Memory read line enable */
- pci_write_config_byte(pdev, MRDMODE, mrdmode);
-#ifdef CONFIG_PPC
- pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
-#endif
+ cmd64x_fixup(pdev);
+
ata_host_resume(host);
return 0;
}
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 03a93186aa1..a0b4640125a 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -38,7 +38,7 @@
#include <linux/libata.h>
#include <asm/msr.h>
-#define DRV_NAME "cs5535"
+#define DRV_NAME "pata_cs5535"
#define DRV_VERSION "0.2.12"
/*
@@ -67,8 +67,6 @@
#define CS5535_CABLE_DETECT 0x48
-#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL)==0x00009172 )
-
/**
* cs5535_cable_detect - detect cable type
* @ap: Port to detect on
@@ -188,16 +186,6 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
};
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
- u32 timings, dummy;
-
- /* Check the BIOS set the initial timing clock. If not set the
- timings for PIO0 */
- rdmsr(ATAC_CH0D0_PIO, timings, dummy);
- if (CS5535_BAD_PIO(timings))
- wrmsr(ATAC_CH0D0_PIO, 0xF7F4F7F4UL, 0);
- rdmsr(ATAC_CH0D1_PIO, timings, dummy);
- if (CS5535_BAD_PIO(timings))
- wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
}
@@ -230,7 +218,7 @@ static void __exit cs5535_exit(void)
}
MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
-MODULE_DESCRIPTION("low-level driver for the NS/AMD 5530");
+MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, cs5535);
MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index aca47e4e29e..f0243ed206f 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -73,7 +73,7 @@ static DEFINE_SPINLOCK(efar_lock);
/**
* efar_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
- * @adev: um
+ * @adev: Device to program
*
* Set PIO mode for device, in host controller PCI config space.
*
@@ -85,9 +85,9 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
- unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
+ unsigned int master_port = ap->port_no ? 0x42 : 0x40;
unsigned long flags;
- u16 idetm_data;
+ u16 master_data;
u8 udma_enable;
int control = 0;
@@ -113,20 +113,20 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
spin_lock_irqsave(&efar_lock, flags);
- pci_read_config_word(dev, idetm_port, &idetm_data);
+ pci_read_config_word(dev, master_port, &master_data);
/* Set PPE, IE, and TIME as appropriate */
if (adev->devno == 0) {
- idetm_data &= 0xCCF0;
- idetm_data |= control;
- idetm_data |= (timings[pio][0] << 12) |
+ master_data &= 0xCCF0;
+ master_data |= control;
+ master_data |= (timings[pio][0] << 12) |
(timings[pio][1] << 8);
} else {
int shift = 4 * ap->port_no;
u8 slave_data;
- idetm_data &= 0xFF0F;
- idetm_data |= (control << 4);
+ master_data &= 0xFF0F;
+ master_data |= (control << 4);
/* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
@@ -135,8 +135,8 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev)
pci_write_config_byte(dev, 0x44, slave_data);
}
- idetm_data |= 0x4000; /* Ensure SITRE is set */
- pci_write_config_word(dev, idetm_port, idetm_data);
+ master_data |= 0x4000; /* Ensure SITRE is set */
+ pci_write_config_word(dev, master_port, master_data);
pci_read_config_byte(dev, 0x48, &udma_enable);
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 6c77d68dbd0..42cffd38910 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -111,6 +111,28 @@ static const struct hpt_clock hpt366_25[] = {
{ 0, 0x01208585 }
};
+/**
+ * hpt36x_find_mode - find the hpt36x timing
+ * @ap: ATA port
+ * @speed: transfer mode
+ *
+ * Return the 32bit register programming information for this channel
+ * that matches the speed provided.
+ */
+
+static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
+{
+ struct hpt_clock *clocks = ap->host->private_data;
+
+ while (clocks->xfer_mode) {
+ if (clocks->xfer_mode == speed)
+ return clocks->timing;
+ clocks++;
+ }
+ BUG();
+ return 0xffffffffU; /* silence compiler warning */
+}
+
static const char * const bad_ata33[] = {
"Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3",
"Maxtor 90845U3", "Maxtor 90650U2",
@@ -210,10 +232,9 @@ static int hpt36x_cable_detect(struct ata_port *ap)
static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
u8 mode)
{
- struct hpt_clock *clocks = ap->host->private_data;
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
u32 addr = 0x40 + 4 * adev->devno;
- u32 mask, reg;
+ u32 mask, reg, t;
/* determine timing mask and find matching clock entry */
if (mode < XFER_MW_DMA_0)
@@ -223,13 +244,7 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
else
mask = 0x30070000;
- while (clocks->xfer_mode) {
- if (clocks->xfer_mode == mode)
- break;
- clocks++;
- }
- if (!clocks->xfer_mode)
- BUG();
+ t = hpt36x_find_mode(ap, mode);
/*
* Combine new mode bits with old config bits and disable
@@ -237,7 +252,7 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
* problems handling I/O errors later.
*/
pci_read_config_dword(pdev, addr, &reg);
- reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000;
+ reg = ((reg & ~mask) | (t & mask)) & ~0xc0000000;
pci_write_config_dword(pdev, addr, reg);
}
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index 998af0e629b..cf9164d79f1 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -76,8 +76,8 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
- unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
- u16 idetm_data;
+ unsigned int master_port = ap->port_no ? 0x42 : 0x40;
+ u16 master_data;
int control = 0;
/*
@@ -100,19 +100,19 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
if (adev->class != ATA_DEV_ATA)
control |= 4; /* PPE */
- pci_read_config_word(dev, idetm_port, &idetm_data);
+ pci_read_config_word(dev, master_port, &master_data);
/* Set PPE, IE, and TIME as appropriate */
if (adev->devno == 0) {
- idetm_data &= 0xCCF0;
- idetm_data |= control;
- idetm_data |= (timings[pio][0] << 12) |
+ master_data &= 0xCCF0;
+ master_data |= control;
+ master_data |= (timings[pio][0] << 12) |
(timings[pio][1] << 8);
} else {
u8 slave_data;
- idetm_data &= 0xFF0F;
- idetm_data |= (control << 4);
+ master_data &= 0xFF0F;
+ master_data |= (control << 4);
/* Slave timing in separate register */
pci_read_config_byte(dev, 0x44, &slave_data);
@@ -121,8 +121,8 @@ static void it8213_set_piomode (struct ata_port *ap, struct ata_device *adev)
pci_write_config_byte(dev, 0x44, slave_data);
}
- idetm_data |= 0x4000; /* Ensure SITRE is set */
- pci_write_config_word(dev, idetm_port, idetm_data);
+ master_data |= 0x4000; /* Ensure SITRE is set */
+ pci_write_config_word(dev, master_port, master_data);
}
/**
@@ -163,7 +163,7 @@ static void it8213_set_dmamode (struct ata_port *ap, struct ata_device *adev)
/* Clocks follow the PIIX style */
u_speed = min(2 - (udma & 1), udma);
- if (udma == 5)
+ if (udma > 4)
u_clock = 0x1000; /* 100Mhz */
else if (udma > 2)
u_clock = 1; /* 66Mhz */
@@ -262,7 +262,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA12_ONLY,
- .udma_mask = ATA_UDMA4, /* FIXME: want UDMA 100? */
+ .udma_mask = ATA_UDMA6,
.port_ops = &it8213_ops,
};
/* Current IT8213 stuff is single port */
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index d960f8e9e8b..35aca7d1a3e 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -79,15 +79,6 @@ static int all;
module_param(all, int, 0444);
MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)");
-struct legacy_data {
- unsigned long timing;
- u8 clock[2];
- u8 last;
- int fast;
- struct platform_device *platform_dev;
-
-};
-
enum controller {
BIOS = 0,
SNOOP = 1,
@@ -104,6 +95,14 @@ enum controller {
UNKNOWN = -1
};
+struct legacy_data {
+ unsigned long timing;
+ u8 clock[2];
+ u8 last;
+ int fast;
+ enum controller type;
+ struct platform_device *platform_dev;
+};
struct legacy_probe {
unsigned char *name;
@@ -137,11 +136,17 @@ static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */
static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */
static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */
static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */
-static int qdi; /* Set to probe QDI controllers */
static int autospeed; /* Chip present which snoops speed changes */
static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
+/* Set to probe QDI controllers */
+#ifdef CONFIG_PATA_QDI_MODULE
+static int qdi = 1;
+#else
+static int qdi;
+#endif
+
#ifdef CONFIG_PATA_WINBOND_VLB_MODULE
static int winbond = 1; /* Set to probe Winbond controllers,
give I/O port if non standard */
@@ -631,40 +636,20 @@ static struct ata_port_operations opti82c46x_port_ops = {
.qc_issue = opti82c46x_qc_issue,
};
-static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct legacy_data *ld_qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- if (ld_qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
-
- ld_qdi->clock[adev->devno] = timing;
-
- outb(timing, ld_qdi->timing);
-}
-
/**
- * qdi6580dp_set_piomode - PIO setup for dual channel
+ * qdi65x0_set_piomode - PIO setup for QDI65x0
* @ap: Port
* @adev: Device
*
+ * In single channel mode the 6580 has one clock per device and we can
+ * avoid the requirement to clock switch. We also have to load the timing
+ * into the right clock according to whether we are master or slave.
+ *
* In dual channel mode the 6580 has one clock per channel and we have
* to software clockswitch in qc_issue.
*/
-static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
struct ata_timing t;
struct legacy_data *ld_qdi = ap->host->private_data;
@@ -682,47 +667,15 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev)
recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
-
ld_qdi->clock[adev->devno] = timing;
- outb(timing, ld_qdi->timing + 2 * ap->port_no);
- /* Clear the FIFO */
- if (adev->class != ATA_DEV_ATA)
- outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
-}
-
-/**
- * qdi6580_set_piomode - PIO setup for single channel
- * @ap: Port
- * @adev: Device
- *
- * In single channel mode the 6580 has one clock per device and we can
- * avoid the requirement to clock switch. We also have to load the timing
- * into the right clock according to whether we are master or slave.
- */
-
-static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct legacy_data *ld_qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
+ if (ld_qdi->type == QDI6580)
+ outb(timing, ld_qdi->timing + 2 * adev->devno);
+ else
+ outb(timing, ld_qdi->timing + 2 * ap->port_no);
- if (ld_qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
- ld_qdi->clock[adev->devno] = timing;
- outb(timing, ld_qdi->timing + 2 * adev->devno);
/* Clear the FIFO */
- if (adev->class != ATA_DEV_ATA)
+ if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA)
outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3);
}
@@ -789,20 +742,20 @@ static int qdi_port(struct platform_device *dev,
static struct ata_port_operations qdi6500_port_ops = {
.inherits = &legacy_base_port_ops,
- .set_piomode = qdi6500_set_piomode,
+ .set_piomode = qdi65x0_set_piomode,
.qc_issue = qdi_qc_issue,
.sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580_port_ops = {
.inherits = &legacy_base_port_ops,
- .set_piomode = qdi6580_set_piomode,
+ .set_piomode = qdi65x0_set_piomode,
.sff_data_xfer = vlb32_data_xfer,
};
static struct ata_port_operations qdi6580dp_port_ops = {
.inherits = &legacy_base_port_ops,
- .set_piomode = qdi6580dp_set_piomode,
+ .set_piomode = qdi65x0_set_piomode,
.qc_issue = qdi_qc_issue,
.sff_data_xfer = vlb32_data_xfer,
};
@@ -879,29 +832,29 @@ static struct ata_port_operations winbond_port_ops = {
};
static struct legacy_controller controllers[] = {
- {"BIOS", &legacy_port_ops, 0x1F,
+ {"BIOS", &legacy_port_ops, ATA_PIO4,
ATA_FLAG_NO_IORDY, 0, NULL },
- {"Snooping", &simple_port_ops, 0x1F,
+ {"Snooping", &simple_port_ops, ATA_PIO4,
0, 0, NULL },
- {"PDC20230", &pdc20230_port_ops, 0x7,
+ {"PDC20230", &pdc20230_port_ops, ATA_PIO2,
ATA_FLAG_NO_IORDY,
ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL },
- {"HT6560A", &ht6560a_port_ops, 0x07,
+ {"HT6560A", &ht6560a_port_ops, ATA_PIO2,
ATA_FLAG_NO_IORDY, 0, NULL },
- {"HT6560B", &ht6560b_port_ops, 0x1F,
+ {"HT6560B", &ht6560b_port_ops, ATA_PIO4,
ATA_FLAG_NO_IORDY, 0, NULL },
- {"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
+ {"OPTI82C611A", &opti82c611a_port_ops, ATA_PIO3,
0, 0, NULL },
- {"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
+ {"OPTI82C46X", &opti82c46x_port_ops, ATA_PIO3,
0, 0, NULL },
- {"QDI6500", &qdi6500_port_ops, 0x07,
+ {"QDI6500", &qdi6500_port_ops, ATA_PIO2,
ATA_FLAG_NO_IORDY,
ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
- {"QDI6580", &qdi6580_port_ops, 0x1F,
+ {"QDI6580", &qdi6580_port_ops, ATA_PIO4,
0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
- {"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
+ {"QDI6580DP", &qdi6580dp_port_ops, ATA_PIO4,
0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
- {"W83759A", &winbond_port_ops, 0x1F,
+ {"W83759A", &winbond_port_ops, ATA_PIO4,
0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,
winbond_port }
};
@@ -1022,6 +975,7 @@ static __init int legacy_init_one(struct legacy_probe *probe)
ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1);
if (!io_addr || !ctrl_addr)
goto fail;
+ ld->type = probe->type;
if (controller->setup)
if (controller->setup(pdev, probe, ld) < 0)
goto fail;
@@ -1306,6 +1260,7 @@ MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for legacy ATA");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("pata_qdi");
MODULE_ALIAS("pata_winbond");
module_param(probe_all, int, 0);
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 2fcac511d39..3e1746314f2 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -780,7 +780,7 @@ mpc52xx_ata_probe(struct platform_device *op)
}
task_irq = bcom_get_task_irq(dmatsk);
- ret = request_irq(task_irq, &mpc52xx_ata_task_irq, IRQF_DISABLED,
+ ret = request_irq(task_irq, &mpc52xx_ata_task_irq, 0,
"ATA task", priv);
if (ret) {
dev_err(&op->dev, "error requesting DMA IRQ\n");
diff --git a/drivers/ata/pata_of_platform.c b/drivers/ata/pata_of_platform.c
index f3054009bd2..a72ab0dde4e 100644
--- a/drivers/ata/pata_of_platform.c
+++ b/drivers/ata/pata_of_platform.c
@@ -11,6 +11,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/ata_platform.h>
@@ -57,11 +59,11 @@ static int __devinit pata_of_platform_probe(struct platform_device *ofdev)
prop = of_get_property(dn, "reg-shift", NULL);
if (prop)
- reg_shift = *prop;
+ reg_shift = be32_to_cpup(prop);
prop = of_get_property(dn, "pio-mode", NULL);
if (prop) {
- pio_mode = *prop;
+ pio_mode = be32_to_cpup(prop);
if (pio_mode > 6) {
dev_err(&ofdev->dev, "invalid pio-mode\n");
return -EINVAL;
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index b1511f38b0e..7d63f24179c 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -63,6 +63,7 @@ enum {
};
static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
+static int pdc2027x_reinit_one(struct pci_dev *pdev);
static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
@@ -126,6 +127,10 @@ static struct pci_driver pdc2027x_pci_driver = {
.id_table = pdc2027x_pci_tbl,
.probe = pdc2027x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = pdc2027x_reinit_one,
+#endif
};
static struct scsi_host_template pdc2027x_sht = {
@@ -754,6 +759,31 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
IRQF_SHARED, &pdc2027x_sht);
}
+#ifdef CONFIG_PM
+static int pdc2027x_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ unsigned int board_idx;
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 ||
+ pdev->device == PCI_DEVICE_ID_PROMISE_20270)
+ board_idx = PDC_UDMA_100;
+ else
+ board_idx = PDC_UDMA_133;
+
+ if (pdc_hardware_init(host, board_idx))
+ return -EIO;
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
/**
* pdc2027x_init - Called after this module is loaded into the kernel.
*/
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
deleted file mode 100644
index 45879dc6fa4..00000000000
--- a/drivers/ata/pata_qdi.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * pata_qdi.c - QDI VLB ATA controllers
- * (C) 2006 Red Hat
- *
- * This driver mostly exists as a proof of concept for non PCI devices under
- * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
- * useful.
- *
- * Tuning code written from the documentation at
- * http://www.ryston.cz/petr/vlb/qd6500.html
- * http://www.ryston.cz/petr/vlb/qd6580.html
- *
- * Probe code based on drivers/ide/legacy/qd65xx.c
- * Rewritten from the work of Colten Edwards <pje120@cs.usask.ca> by
- * Samuel Thibault <samuel.thibault@ens-lyon.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <scsi/scsi_host.h>
-#include <linux/libata.h>
-#include <linux/platform_device.h>
-
-#define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.3.1"
-
-#define NR_HOST 4 /* Two 6580s */
-
-struct qdi_data {
- unsigned long timing;
- u8 clock[2];
- u8 last;
- int fast;
- struct platform_device *platform_dev;
-
-};
-
-static struct ata_host *qdi_host[NR_HOST];
-static struct qdi_data qdi_data[NR_HOST];
-static int nr_qdi_host;
-
-#ifdef MODULE
-static int probe_qdi = 1;
-#else
-static int probe_qdi;
-#endif
-
-static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct qdi_data *qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- if (qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
-
- qdi->clock[adev->devno] = timing;
-
- outb(timing, qdi->timing);
-}
-
-static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev)
-{
- struct ata_timing t;
- struct qdi_data *qdi = ap->host->private_data;
- int active, recovery;
- u8 timing;
-
- /* Get the timing data in cycles */
- ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
-
- if (qdi->fast) {
- active = 8 - clamp_val(t.active, 1, 8);
- recovery = 18 - clamp_val(t.recover, 3, 18);
- } else {
- active = 9 - clamp_val(t.active, 2, 9);
- recovery = 15 - clamp_val(t.recover, 0, 15);
- }
- timing = (recovery << 4) | active | 0x08;
-
- qdi->clock[adev->devno] = timing;
-
- outb(timing, qdi->timing);
-
- /* Clear the FIFO */
- if (adev->class != ATA_DEV_ATA)
- outb(0x5F, (qdi->timing & 0xFFF0) + 3);
-}
-
-/**
- * qdi_qc_issue - command issue
- * @qc: command pending
- *
- * Called when the libata layer is about to issue a command. We wrap
- * this interface so that we can load the correct ATA timings.
- */
-
-static unsigned int qdi_qc_issue(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct ata_device *adev = qc->dev;
- struct qdi_data *qdi = ap->host->private_data;
-
- if (qdi->clock[adev->devno] != qdi->last) {
- if (adev->pio_mode) {
- qdi->last = qdi->clock[adev->devno];
- outb(qdi->clock[adev->devno], qdi->timing);
- }
- }
- return ata_sff_qc_issue(qc);
-}
-
-static unsigned int qdi_data_xfer(struct ata_device *dev, unsigned char *buf,
- unsigned int buflen, int rw)
-{
- if (ata_id_has_dword_io(dev->id)) {
- struct ata_port *ap = dev->link->ap;
- int slop = buflen & 3;
-
- if (rw == READ)
- ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
- else
- iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
-
- if (unlikely(slop)) {
- __le32 pad;
- if (rw == READ) {
- pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
- memcpy(buf + buflen - slop, &pad, slop);
- } else {
- memcpy(&pad, buf + buflen - slop, slop);
- iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
- }
- buflen += 4 - slop;
- }
- } else
- buflen = ata_sff_data_xfer(dev, buf, buflen, rw);
-
- return buflen;
-}
-
-static struct scsi_host_template qdi_sht = {
- ATA_PIO_SHT(DRV_NAME),
-};
-
-static struct ata_port_operations qdi6500_port_ops = {
- .inherits = &ata_sff_port_ops,
- .qc_issue = qdi_qc_issue,
- .sff_data_xfer = qdi_data_xfer,
- .cable_detect = ata_cable_40wire,
- .set_piomode = qdi6500_set_piomode,
-};
-
-static struct ata_port_operations qdi6580_port_ops = {
- .inherits = &qdi6500_port_ops,
- .set_piomode = qdi6580_set_piomode,
-};
-
-/**
- * qdi_init_one - attach a qdi interface
- * @type: Type to display
- * @io: I/O port start
- * @irq: interrupt line
- * @fast: True if on a > 33Mhz VLB
- *
- * Register an ISA bus IDE interface. Such interfaces are PIO and we
- * assume do not support IRQ sharing.
- */
-
-static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast)
-{
- unsigned long ctl = io + 0x206;
- struct platform_device *pdev;
- struct ata_host *host;
- struct ata_port *ap;
- void __iomem *io_addr, *ctl_addr;
- int ret;
-
- /*
- * Fill in a probe structure first of all
- */
-
- pdev = platform_device_register_simple(DRV_NAME, nr_qdi_host, NULL, 0);
- if (IS_ERR(pdev))
- return PTR_ERR(pdev);
-
- ret = -ENOMEM;
- io_addr = devm_ioport_map(&pdev->dev, io, 8);
- ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1);
- if (!io_addr || !ctl_addr)
- goto fail;
-
- ret = -ENOMEM;
- host = ata_host_alloc(&pdev->dev, 1);
- if (!host)
- goto fail;
- ap = host->ports[0];
-
- if (type == 6580) {
- ap->ops = &qdi6580_port_ops;
- ap->pio_mask = ATA_PIO4;
- ap->flags |= ATA_FLAG_SLAVE_POSS;
- } else {
- ap->ops = &qdi6500_port_ops;
- ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */
- ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
- }
-
- ap->ioaddr.cmd_addr = io_addr;
- ap->ioaddr.altstatus_addr = ctl_addr;
- ap->ioaddr.ctl_addr = ctl_addr;
- ata_sff_std_ports(&ap->ioaddr);
-
- ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl);
-
- /*
- * Hook in a private data structure per channel
- */
- ap->private_data = &qdi_data[nr_qdi_host];
-
- qdi_data[nr_qdi_host].timing = port;
- qdi_data[nr_qdi_host].fast = fast;
- qdi_data[nr_qdi_host].platform_dev = pdev;
-
- printk(KERN_INFO DRV_NAME": qd%d at 0x%lx.\n", type, io);
-
- /* activate */
- ret = ata_host_activate(host, irq, ata_sff_interrupt, 0, &qdi_sht);
- if (ret)
- goto fail;
-
- qdi_host[nr_qdi_host++] = dev_get_drvdata(&pdev->dev);
- return 0;
-
- fail:
- platform_device_unregister(pdev);
- return ret;
-}
-
-/**
- * qdi_init - attach qdi interfaces
- *
- * Attach qdi IDE interfaces by scanning the ports it may occupy.
- */
-
-static __init int qdi_init(void)
-{
- unsigned long flags;
- static const unsigned long qd_port[2] = { 0x30, 0xB0 };
- static const unsigned long ide_port[2] = { 0x170, 0x1F0 };
- static const int ide_irq[2] = { 14, 15 };
-
- int ct = 0;
- int i;
-
- if (probe_qdi == 0)
- return -ENODEV;
-
- /*
- * Check each possible QD65xx base address
- */
-
- for (i = 0; i < 2; i++) {
- unsigned long port = qd_port[i];
- u8 r, res;
-
-
- if (request_region(port, 2, "pata_qdi")) {
- /* Check for a card */
- local_irq_save(flags);
- r = inb_p(port);
- outb_p(0x19, port);
- res = inb_p(port);
- outb_p(r, port);
- local_irq_restore(flags);
-
- /* Fail */
- if (res == 0x19)
- {
- release_region(port, 2);
- continue;
- }
-
- /* Passes the presence test */
- r = inb_p(port + 1); /* Check port agrees with port set */
- if ((r & 2) >> 1 != i) {
- release_region(port, 2);
- continue;
- }
-
- /* Check card type */
- if ((r & 0xF0) == 0xC0) {
- /* QD6500: single channel */
- if (r & 8) {
- /* Disabled ? */
- release_region(port, 2);
- continue;
- }
- if (qdi_init_one(port, 6500, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
- ct++;
- }
- if (((r & 0xF0) == 0xA0) || (r & 0xF0) == 0x50) {
- /* QD6580: dual channel */
- if (!request_region(port + 2 , 2, "pata_qdi"))
- {
- release_region(port, 2);
- continue;
- }
- res = inb(port + 3);
- if (res & 1) {
- /* Single channel mode */
- if (qdi_init_one(port, 6580, ide_port[r & 0x01], ide_irq[r & 0x01], r & 0x04) == 0)
- ct++;
- } else {
- /* Dual channel mode */
- if (qdi_init_one(port, 6580, 0x1F0, 14, r & 0x04) == 0)
- ct++;
- if (qdi_init_one(port + 2, 6580, 0x170, 15, r & 0x04) == 0)
- ct++;
- }
- }
- }
- }
- if (ct != 0)
- return 0;
- return -ENODEV;
-}
-
-static __exit void qdi_exit(void)
-{
- int i;
-
- for (i = 0; i < nr_qdi_host; i++) {
- ata_host_detach(qdi_host[i]);
- /* Free the control resource. The 6580 dual channel has the resources
- * claimed as a pair of 2 byte resources so we need no special cases...
- */
- release_region(qdi_data[i].timing, 2);
- platform_device_unregister(qdi_data[i].platform_dev);
- }
-}
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("low-level driver for qdi ATA");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-module_init(qdi_init);
-module_exit(qdi_exit);
-
-module_param(probe_qdi, int, 0);
-
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index 4d318f86ae8..e6a2dd7809c 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -86,6 +86,8 @@ static int rdc_pata_prereset(struct ata_link *link, unsigned long deadline)
return ata_sff_prereset(link, deadline);
}
+static DEFINE_SPINLOCK(rdc_lock);
+
/**
* rdc_set_piomode - Initialize host controller PATA PIO timings
* @ap: Port whose timings we are configuring
@@ -101,6 +103,7 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
unsigned int pio = adev->pio_mode - XFER_PIO_0;
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
unsigned int is_slave = (adev->devno != 0);
unsigned int master_port= ap->port_no ? 0x42 : 0x40;
unsigned int slave_port = 0x44;
@@ -124,6 +127,8 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
if (adev->class == ATA_DEV_ATA)
control |= 4; /* PPE enable */
+ spin_lock_irqsave(&rdc_lock, flags);
+
/* PIO configuration clears DTE unconditionally. It will be
* programmed in set_dmamode which is guaranteed to be called
* after set_piomode if any DMA mode is available.
@@ -161,6 +166,8 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
pci_read_config_byte(dev, 0x48, &udma_enable);
udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));
pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&rdc_lock, flags);
}
/**
@@ -177,6 +184,7 @@ static void rdc_set_piomode(struct ata_port *ap, struct ata_device *adev)
static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *dev = to_pci_dev(ap->host->dev);
+ unsigned long flags;
u8 master_port = ap->port_no ? 0x42 : 0x40;
u16 master_data;
u8 speed = adev->dma_mode;
@@ -190,6 +198,8 @@ static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{ 2, 1 },
{ 2, 3 }, };
+ spin_lock_irqsave(&rdc_lock, flags);
+
pci_read_config_word(dev, master_port, &master_data);
pci_read_config_byte(dev, 0x48, &udma_enable);
@@ -271,6 +281,8 @@ static void rdc_set_dmamode(struct ata_port *ap, struct ata_device *adev)
pci_write_config_word(dev, master_port, master_data);
}
pci_write_config_byte(dev, 0x48, udma_enable);
+
+ spin_unlock_irqrestore(&rdc_lock, flags);
}
static struct ata_port_operations rdc_pata_ops = {
@@ -375,6 +387,10 @@ static struct pci_driver rdc_pci_driver = {
.id_table = rdc_pci_tbl,
.probe = rdc_init_one,
.remove = rdc_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = ata_pci_device_resume,
+#endif
};
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index e2c18257adf..c0e603a84f7 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -38,7 +38,7 @@
#include <scsi/scsi_host.h>
#include <linux/libata.h>
-#define DRV_NAME "sc1200"
+#define DRV_NAME "pata_sc1200"
#define DRV_VERSION "0.2.6"
#define SC1200_REV_A 0x00
@@ -86,10 +86,14 @@ static int sc1200_clock(void)
static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static const u32 pio_timings[4][5] = {
- {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz
- {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz
- {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz
- {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131} // format1, 66Mhz
+ /* format0, 33Mhz */
+ { 0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010 },
+ /* format1, 33Mhz */
+ { 0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010 },
+ /* format1, 48Mhz */
+ { 0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021 },
+ /* format1, 66Mhz */
+ { 0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131 }
};
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index eb748e32714..e265f835c95 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -826,18 +826,6 @@ static unsigned int scc_data_xfer (struct ata_device *dev, unsigned char *buf,
}
/**
- * scc_pata_prereset - prepare for reset
- * @ap: ATA port to be reset
- * @deadline: deadline jiffies for the operation
- */
-
-static int scc_pata_prereset(struct ata_link *link, unsigned long deadline)
-{
- link->ap->cbl = ATA_CBL_PATA80;
- return ata_sff_prereset(link, deadline);
-}
-
-/**
* scc_postreset - standard postreset callback
* @ap: the target ata_port
* @classes: classes of attached devices
@@ -946,7 +934,7 @@ static struct ata_port_operations scc_pata_ops = {
.bmdma_status = scc_bmdma_status,
.sff_data_xfer = scc_data_xfer,
- .prereset = scc_pata_prereset,
+ .cable_detect = ata_cable_80wire,
.softreset = scc_softreset,
.postreset = scc_postreset,
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 86dd714e3e1..71eaf385e97 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -58,31 +58,15 @@ static const char *csb_bad_ata100[] = {
};
/**
- * dell_cable - Dell serverworks cable detection
+ * oem_cable - Dell/Sun serverworks cable detection
* @ap: ATA port to do cable detect
*
- * Dell hide the 40/80 pin select for their interfaces in the top two
- * bits of the subsystem ID.
+ * Dell PowerEdge and Sun Cobalt 'Alpine' hide the 40/80 pin select
+ * for their interfaces in the top two bits of the subsystem ID.
*/
-static int dell_cable(struct ata_port *ap) {
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-
- if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
- return ATA_CBL_PATA80;
- return ATA_CBL_PATA40;
-}
-
-/**
- * sun_cable - Sun Cobalt 'Alpine' cable detection
- * @ap: ATA port to do cable select
- *
- * Cobalt CSB5 IDE hides the 40/80pin in the top two bits of the
- * subsystem ID the same as dell. We could use one function but we may
- * need to extend the Dell one in future
- */
-
-static int sun_cable(struct ata_port *ap) {
+static int oem_cable(struct ata_port *ap)
+{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
if (pdev->subsystem_device & (1 << (ap->port_no + 14)))
@@ -90,49 +74,21 @@ static int sun_cable(struct ata_port *ap) {
return ATA_CBL_PATA40;
}
-/**
- * osb4_cable - OSB4 cable detect
- * @ap: ATA port to check
- *
- * The OSB4 isn't UDMA66 capable so this is easy
- */
-
-static int osb4_cable(struct ata_port *ap) {
- return ATA_CBL_PATA40;
-}
-
-/**
- * csb_cable - CSB5/6 cable detect
- * @ap: ATA port to check
- *
- * Serverworks default arrangement is to use the drive side detection
- * only.
- */
-
-static int csb_cable(struct ata_port *ap) {
- return ATA_CBL_PATA_UNK;
-}
-
struct sv_cable_table {
int device;
int subvendor;
int (*cable_detect)(struct ata_port *ap);
};
-/*
- * Note that we don't copy the old serverworks code because the old
- * code contains obvious mistakes
- */
-
static struct sv_cable_table cable_detect[] = {
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, dell_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, sun_cable },
- { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, osb4_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, csb_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, csb_cable },
- { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, csb_cable },
- { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, csb_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_VENDOR_ID_DELL, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_VENDOR_ID_SUN, oem_cable },
+ { PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, ata_cable_40wire },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, ata_cable_unknown },
+ { PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, ata_cable_unknown },
{ }
};
@@ -393,6 +349,31 @@ static void serverworks_fixup_ht1000(struct pci_dev *pdev)
pci_write_config_byte(pdev, 0x5A, btr);
}
+static int serverworks_fixup(struct pci_dev *pdev)
+{
+ int rc = 0;
+
+ /* Force master latency timer to 64 PCI clocks */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
+ rc = serverworks_fixup_osb4(pdev);
+ break;
+ case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
+ ata_pci_bmdma_clear_simplex(pdev);
+ /* fall through */
+ case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
+ case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
+ rc = serverworks_fixup_csb(pdev);
+ break;
+ case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
+ serverworks_fixup_ht1000(pdev);
+ break;
+ }
+
+ return rc;
+}
static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
@@ -430,13 +411,12 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
if (rc)
return rc;
- /* Force master latency timer to 64 PCI clocks */
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
+ rc = serverworks_fixup(pdev);
/* OSB4 : South Bridge and IDE */
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
/* Select non UDMA capable OSB4 if we can't do fixups */
- if ( serverworks_fixup_osb4(pdev) < 0)
+ if (rc < 0)
ppi[0] = &info[1];
}
/* setup CSB5/CSB6 : South Bridge and IDE option RAID */
@@ -446,19 +426,13 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
/* If the returned btr is the newer revision then
select the right info block */
- if (serverworks_fixup_csb(pdev) == 3)
+ if (rc == 3)
ppi[0] = &info[3];
/* Is this the 3rd channel CSB6 IDE ? */
if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)
ppi[1] = &ata_dummy_port_info;
}
- /* setup HT1000E */
- else if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
- serverworks_fixup_ht1000(pdev);
-
- if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
- ata_pci_bmdma_clear_simplex(pdev);
return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
}
@@ -473,24 +447,7 @@ static int serverworks_reinit_one(struct pci_dev *pdev)
if (rc)
return rc;
- /* Force master latency timer to 64 PCI clocks */
- pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0x40);
-
- switch (pdev->device) {
- case PCI_DEVICE_ID_SERVERWORKS_OSB4IDE:
- serverworks_fixup_osb4(pdev);
- break;
- case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
- ata_pci_bmdma_clear_simplex(pdev);
- /* fall through */
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
- serverworks_fixup_csb(pdev);
- break;
- case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
- serverworks_fixup_ht1000(pdev);
- break;
- }
+ (void)serverworks_fixup(pdev);
ata_host_resume(host);
return 0;
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 31f759b0ab7..b92eacf8dd3 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -38,11 +38,12 @@
/**
* sil680_selreg - return register base
- * @hwif: interface
+ * @ap: ATA interface
* @r: config offset
*
- * Turn a config register offset into the right address in either
- * PCI space or MMIO space to access the control register in question
+ * Turn a config register offset into the right address in PCI space
+ * to access the control register in question.
+ *
* Thankfully this is a configuration operation so isn't performance
* criticial.
*/
@@ -56,12 +57,12 @@ static unsigned long sil680_selreg(struct ata_port *ap, int r)
/**
* sil680_seldev - return register base
- * @hwif: interface
+ * @ap: ATA interface
* @r: config offset
*
- * Turn a config register offset into the right address in either
- * PCI space or MMIO space to access the control register in question
- * including accounting for the unit shift.
+ * Turn a config register offset into the right address in PCI space
+ * to access the control register in question including accounting for
+ * the unit shift.
*/
static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev, int r)
@@ -81,7 +82,8 @@ static unsigned long sil680_seldev(struct ata_port *ap, struct ata_device *adev,
* space for us.
*/
-static int sil680_cable_detect(struct ata_port *ap) {
+static int sil680_cable_detect(struct ata_port *ap)
+{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned long addr = sil680_selreg(ap, 0);
u8 ata66;
@@ -93,7 +95,7 @@ static int sil680_cable_detect(struct ata_port *ap) {
}
/**
- * sil680_set_piomode - set initial PIO mode data
+ * sil680_set_piomode - set PIO mode data
* @ap: ATA interface
* @adev: ATA device
*
@@ -104,8 +106,12 @@ static int sil680_cable_detect(struct ata_port *ap) {
static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
- static u16 speed_p[5] = { 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1 };
- static u16 speed_t[5] = { 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1 };
+ static const u16 speed_p[5] = {
+ 0x328A, 0x2283, 0x1104, 0x10C3, 0x10C1
+ };
+ static const u16 speed_t[5] = {
+ 0x328A, 0x2283, 0x1281, 0x10C3, 0x10C1
+ };
unsigned long tfaddr = sil680_selreg(ap, 0x02);
unsigned long addr = sil680_seldev(ap, adev, 0x04);
@@ -140,22 +146,23 @@ static void sil680_set_piomode(struct ata_port *ap, struct ata_device *adev)
}
/**
- * sil680_set_dmamode - set initial DMA mode data
+ * sil680_set_dmamode - set DMA mode data
* @ap: ATA interface
* @adev: ATA device
*
- * Program the MWDMA/UDMA modes for the sil680 k
- * chipset. The MWDMA mode values are pulled from a lookup table
+ * Program the MWDMA/UDMA modes for the sil680 chipset.
+ *
+ * The MWDMA mode values are pulled from a lookup table
* while the chipset uses mode number for UDMA.
*/
static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
- static u8 ultra_table[2][7] = {
+ static const u8 ultra_table[2][7] = {
{ 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01, 0xFF }, /* 100MHz */
{ 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }, /* 133Mhz */
};
- static u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
+ static const u16 dma_table[3] = { 0x2208, 0x10C2, 0x10C1 };
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned long ma = sil680_seldev(ap, adev, 0x08);
@@ -175,7 +182,7 @@ static void sil680_set_dmamode(struct ata_port *ap, struct ata_device *adev)
mode &= ~(0x03 << port_shift);
/* Extract scsc */
- scsc = (scsc & 0x30) ? 1: 0;
+ scsc = (scsc & 0x30) ? 1 : 0;
if (adev->dma_mode >= XFER_UDMA_0) {
multi = 0x10C1;
@@ -248,7 +255,7 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
{
u8 tmpbyte = 0;
- /* FIXME: double check */
+ /* FIXME: double check */
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE,
pdev->revision ? 1 : 255);
@@ -266,22 +273,22 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
*try_mmio = (tmpbyte & 1) || pci_resource_start(pdev, 5);
#endif
- switch(tmpbyte & 0x30) {
- case 0x00:
- /* 133 clock attempt to force it on */
- pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
- break;
- case 0x30:
- /* if clocking is disabled */
- /* 133 clock attempt to force it on */
- pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
- break;
- case 0x10:
- /* 133 already */
- break;
- case 0x20:
- /* BIOS set PCI x2 clocking */
- break;
+ switch (tmpbyte & 0x30) {
+ case 0x00:
+ /* 133 clock attempt to force it on */
+ pci_write_config_byte(pdev, 0x8A, tmpbyte|0x10);
+ break;
+ case 0x30:
+ /* if clocking is disabled */
+ /* 133 clock attempt to force it on */
+ pci_write_config_byte(pdev, 0x8A, tmpbyte & ~0x20);
+ break;
+ case 0x10:
+ /* 133 already */
+ break;
+ case 0x20:
+ /* BIOS set PCI x2 clocking */
+ break;
}
pci_read_config_byte(pdev, 0x8A, &tmpbyte);
@@ -299,12 +306,19 @@ static u8 sil680_init_chip(struct pci_dev *pdev, int *try_mmio)
pci_write_config_dword(pdev, 0xB8, 0x43924392);
pci_write_config_dword(pdev, 0xBC, 0x40094009);
- switch(tmpbyte & 0x30) {
- case 0x00: printk(KERN_INFO "sil680: 100MHz clock.\n");break;
- case 0x10: printk(KERN_INFO "sil680: 133MHz clock.\n");break;
- case 0x20: printk(KERN_INFO "sil680: Using PCI clock.\n");break;
- /* This last case is _NOT_ ok */
- case 0x30: printk(KERN_ERR "sil680: Clock disabled ?\n");
+ switch (tmpbyte & 0x30) {
+ case 0x00:
+ printk(KERN_INFO "sil680: 100MHz clock.\n");
+ break;
+ case 0x10:
+ printk(KERN_INFO "sil680: 133MHz clock.\n");
+ break;
+ case 0x20:
+ printk(KERN_INFO "sil680: Using PCI clock.\n");
+ break;
+ /* This last case is _NOT_ ok */
+ case 0x30:
+ printk(KERN_ERR "sil680: Clock disabled ?\n");
}
return tmpbyte & 0x30;
}
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 533f2aefab8..b0edc7de7b2 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -55,7 +55,7 @@ static const struct sis_laptop sis_laptop[] = {
/* devid, subvendor, subdev */
{ 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
{ 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */
- { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
+ { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
/* end marker */
{ 0, }
};
@@ -76,7 +76,7 @@ static int sis_short_ata40(struct pci_dev *dev)
}
/**
- * sis_old_port_base - return PCI configuration base for dev
+ * sis_old_port_base - return PCI configuration base for dev
* @adev: device
*
* Returns the base of the PCI configuration registers for this port
@@ -85,11 +85,34 @@ static int sis_short_ata40(struct pci_dev *dev)
static int sis_old_port_base(struct ata_device *adev)
{
- return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno);
+ return 0x40 + (4 * adev->link->ap->port_no) + (2 * adev->devno);
}
/**
- * sis_133_cable_detect - check for 40/80 pin
+ * sis_port_base - return PCI configuration base for dev
+ * @adev: device
+ *
+ * Returns the base of the PCI configuration registers for this port
+ * number.
+ */
+
+static int sis_port_base(struct ata_device *adev)
+{
+ struct ata_port *ap = adev->link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = 0x40;
+ u32 reg54;
+
+ /* If bit 30 is set then the registers are mapped at 0x70 not 0x40 */
+ pci_read_config_dword(pdev, 0x54, &reg54);
+ if (reg54 & 0x40000000)
+ port = 0x70;
+
+ return port + (8 * ap->port_no) + (4 * adev->devno);
+}
+
+/**
+ * sis_133_cable_detect - check for 40/80 pin
* @ap: Port
* @deadline: deadline jiffies for the operation
*
@@ -110,7 +133,7 @@ static int sis_133_cable_detect(struct ata_port *ap)
}
/**
- * sis_66_cable_detect - check for 40/80 pin
+ * sis_66_cable_detect - check for 40/80 pin
* @ap: Port
*
* Perform cable detection on the UDMA66, UDMA100 and early UDMA133
@@ -132,7 +155,7 @@ static int sis_66_cable_detect(struct ata_port *ap)
/**
- * sis_pre_reset - probe begin
+ * sis_pre_reset - probe begin
* @link: ATA link
* @deadline: deadline jiffies for the operation
*
@@ -160,7 +183,7 @@ static int sis_pre_reset(struct ata_link *link, unsigned long deadline)
/**
- * sis_set_fifo - Set RWP fifo bits for this device
+ * sis_set_fifo - Set RWP fifo bits for this device
* @ap: Port
* @adev: Device
*
@@ -203,13 +226,13 @@ static void sis_set_fifo(struct ata_port *ap, struct ata_device *adev)
static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int port = sis_old_port_base(adev);
u8 t1, t2;
int speed = adev->pio_mode - XFER_PIO_0;
- const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
- const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
+ static const u8 active[] = { 0x00, 0x07, 0x04, 0x03, 0x01 };
+ static const u8 recovery[] = { 0x00, 0x06, 0x04, 0x03, 0x03 };
sis_set_fifo(ap, adev);
@@ -240,11 +263,11 @@ static void sis_old_set_piomode (struct ata_port *ap, struct ata_device *adev)
static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int port = sis_old_port_base(adev);
int speed = adev->pio_mode - XFER_PIO_0;
- const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
+ static const u8 actrec[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
sis_set_fifo(ap, adev);
@@ -265,20 +288,19 @@ static void sis_100_set_piomode (struct ata_port *ap, struct ata_device *adev)
static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int port = 0x40;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port;
u32 t1;
- u32 reg54;
int speed = adev->pio_mode - XFER_PIO_0;
- const u32 timing133[] = {
+ static const u32 timing133[] = {
0x28269000, /* Recovery << 24 | Act << 16 | Ini << 12 */
0x0C266000,
0x04263000,
0x0C0A3000,
0x05093000
};
- const u32 timing100[] = {
+ static const u32 timing100[] = {
0x1E1C6000, /* Recovery << 24 | Act << 16 | Ini << 12 */
0x091C4000,
0x031C2000,
@@ -288,12 +310,7 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
sis_set_fifo(ap, adev);
- /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
- pci_read_config_dword(pdev, 0x54, &reg54);
- if (reg54 & 0x40000000)
- port = 0x70;
- port += 8 * ap->port_no + 4 * adev->devno;
-
+ port = sis_port_base(adev);
pci_read_config_dword(pdev, port, &t1);
t1 &= 0xC0C00FFF; /* Mask out timing */
@@ -319,13 +336,13 @@ static void sis_133_set_piomode (struct ata_port *ap, struct ata_device *adev)
static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u16 timing;
- const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
- const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
+ static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+ static const u16 udma_bits[] = { 0xE000, 0xC000, 0xA000 };
pci_read_config_word(pdev, drive_pci, &timing);
@@ -358,14 +375,14 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u16 timing;
/* MWDMA 0-2 and UDMA 0-5 */
- const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
- const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
+ static const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 };
+ static const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 };
pci_read_config_word(pdev, drive_pci, &timing);
@@ -397,12 +414,12 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u8 timing;
- const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
+ static const u8 udma_bits[] = { 0x8B, 0x87, 0x85, 0x83, 0x82, 0x81};
pci_read_config_byte(pdev, drive_pci + 1, &timing);
@@ -431,7 +448,7 @@ static void sis_100_set_dmamode (struct ata_port *ap, struct ata_device *adev)
static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int speed = adev->dma_mode - XFER_MW_DMA_0;
int drive_pci = sis_old_port_base(adev);
u8 timing;
@@ -464,32 +481,34 @@ static void sis_133_early_set_dmamode (struct ata_port *ap, struct ata_device *a
static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
{
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- int speed = adev->dma_mode - XFER_MW_DMA_0;
- int port = 0x40;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port;
u32 t1;
- u32 reg54;
-
- /* bits 4- cycle time 8 - cvs time */
- static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
- static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
-
- /* If bit 14 is set then the registers are mapped at 0x70 not 0x40 */
- pci_read_config_dword(pdev, 0x54, &reg54);
- if (reg54 & 0x40000000)
- port = 0x70;
- port += (8 * ap->port_no) + (4 * adev->devno);
+ port = sis_port_base(adev);
pci_read_config_dword(pdev, port, &t1);
if (adev->dma_mode < XFER_UDMA_0) {
+ /* Recovery << 24 | Act << 16 | Ini << 12, like PIO modes */
+ static const u32 timing_u100[] = { 0x19154000, 0x06072000, 0x04062000 };
+ static const u32 timing_u133[] = { 0x221C6000, 0x0C0A3000, 0x05093000 };
+ int speed = adev->dma_mode - XFER_MW_DMA_0;
+
+ t1 &= 0xC0C00FFF;
+ /* disable UDMA */
t1 &= ~0x00000004;
- /* FIXME: need data sheet to add MWDMA here. Also lacking on
- ide/pci driver */
+ if (t1 & 0x08)
+ t1 |= timing_u133[speed];
+ else
+ t1 |= timing_u100[speed];
} else {
- speed = adev->dma_mode - XFER_UDMA_0;
- /* if & 8 no UDMA133 - need info for ... */
+ /* bits 4- cycle time 8 - cvs time */
+ static const u32 timing_u100[] = { 0x6B0, 0x470, 0x350, 0x140, 0x120, 0x110, 0x000 };
+ static const u32 timing_u133[] = { 0x9F0, 0x6A0, 0x470, 0x250, 0x230, 0x220, 0x210 };
+ int speed = adev->dma_mode - XFER_UDMA_0;
+
t1 &= ~0x00000FF0;
+ /* enable UDMA */
t1 |= 0x00000004;
if (t1 & 0x08)
t1 |= timing_u133[speed];
@@ -499,6 +518,27 @@ static void sis_133_set_dmamode (struct ata_port *ap, struct ata_device *adev)
pci_write_config_dword(pdev, port, t1);
}
+/**
+ * sis_133_mode_filter - mode selection filter
+ * @adev: ATA device
+ *
+ * Block UDMA6 on devices that do not support it.
+ */
+
+static unsigned long sis_133_mode_filter(struct ata_device *adev, unsigned long mask)
+{
+ struct ata_port *ap = adev->link->ap;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+ int port = sis_port_base(adev);
+ u32 t1;
+
+ pci_read_config_dword(pdev, port, &t1);
+ /* if ATA133 is disabled, mask it out */
+ if (!(t1 & 0x08))
+ mask &= ~(0xC0 << ATA_SHIFT_UDMA);
+ return mask;
+}
+
static struct scsi_host_template sis_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
@@ -520,6 +560,7 @@ static struct ata_port_operations sis_133_ops = {
.set_piomode = sis_133_set_piomode,
.set_dmamode = sis_133_set_dmamode,
.cable_detect = sis_133_cable_detect,
+ .mode_filter = sis_133_mode_filter,
};
static struct ata_port_operations sis_133_early_ops = {
@@ -588,7 +629,7 @@ static const struct ata_port_info sis_info100_early = {
static const struct ata_port_info sis_info133 = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
- /* No MWDMA */
+ .mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.port_ops = &sis_133_ops,
};
@@ -669,7 +710,7 @@ static void sis_fixup(struct pci_dev *pdev, struct sis_chipset *sis)
* @pdev: PCI device to register
* @ent: Entry in sis_pci_tbl matching with @pdev
*
- * Called from kernel PCI layer. We probe for combined mode (sigh),
+ * Called from kernel PCI layer. We probe for combined mode (sigh),
* and then hand over control to libata, for it to do the rest.
*
* LOCKING:
@@ -769,17 +810,20 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
switch(trueid) {
case 0x5518: /* SIS 962/963 */
+ dev_info(&pdev->dev,
+ "SiS 962/963 MuTIOL IDE UDMA133 controller\n");
chipset = &sis133;
if ((idemisc & 0x40000000) == 0) {
pci_write_config_dword(pdev, 0x54, idemisc | 0x40000000);
- printk(KERN_INFO "SIS5513: Switching to 5513 register mapping\n");
+ dev_info(&pdev->dev,
+ "Switching to 5513 register mapping\n");
}
break;
case 0x0180: /* SIS 965/965L */
- chipset = &sis133;
+ chipset = &sis133;
break;
case 0x1180: /* SIS 966/966L */
- chipset = &sis133;
+ chipset = &sis133;
break;
}
}
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index c06ce8ced56..24cf200dd1c 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -1,6 +1,7 @@
/*
* pata_sl82c105.c - SL82C105 PATA for new ATA layer
* (C) 2005 Red Hat Inc
+ * (C) 2011 Bartlomiej Zolnierkiewicz
*
* Based in part on linux/drivers/ide/pci/sl82c105.c
* SL82C105/Winbond 553 IDE driver
@@ -289,6 +290,14 @@ static int sl82c105_bridge_revision(struct pci_dev *pdev)
return bridge->revision;
}
+static void sl82c105_fixup(struct pci_dev *pdev)
+{
+ u32 val;
+
+ pci_read_config_dword(pdev, 0x40, &val);
+ val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
+ pci_write_config_dword(pdev, 0x40, val);
+}
static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
@@ -306,7 +315,6 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
/* for now use only the first port */
const struct ata_port_info *ppi[] = { &info_early,
NULL };
- u32 val;
int rev;
int rc;
@@ -325,13 +333,28 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
else
ppi[0] = &info_dma;
- pci_read_config_dword(dev, 0x40, &val);
- val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
- pci_write_config_dword(dev, 0x40, val);
+ sl82c105_fixup(dev);
return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
}
+#ifdef CONFIG_PM
+static int sl82c105_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ sl82c105_fixup(pdev);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static const struct pci_device_id sl82c105[] = {
{ PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), },
@@ -342,7 +365,11 @@ static struct pci_driver sl82c105_pci_driver = {
.name = DRV_NAME,
.id_table = sl82c105,
.probe = sl82c105_init_one,
- .remove = ata_pci_remove_one
+ .remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = sl82c105_reinit_one,
+#endif
};
static int __init sl82c105_init(void)
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 8e9f5048a10..255f336cd7e 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -509,6 +509,27 @@ static void via_config_fifo(struct pci_dev *pdev, unsigned int flags)
}
}
+static void via_fixup(struct pci_dev *pdev, const struct via_isa_bridge *config)
+{
+ u32 timing;
+
+ /* Initialise the FIFO for the enabled channels. */
+ via_config_fifo(pdev, config->flags);
+
+ if (config->udma_mask == ATA_UDMA4) {
+ /* The 66 MHz devices require we enable the clock */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing |= 0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ }
+ if (config->flags & VIA_BAD_CLK66) {
+ /* Disable the 66MHz clock on problem devices */
+ pci_read_config_dword(pdev, 0x50, &timing);
+ timing &= ~0x80008;
+ pci_write_config_dword(pdev, 0x50, timing);
+ }
+}
+
/**
* via_init_one - discovery callback
* @pdev: PCI device
@@ -570,7 +591,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
struct pci_dev *isa;
const struct via_isa_bridge *config;
u8 enable;
- u32 timing;
unsigned long flags = id->driver_data;
int rc;
@@ -609,9 +629,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENODEV;
}
- /* Initialise the FIFO for the enabled channels. */
- via_config_fifo(pdev, config->flags);
-
/* Clock set up */
switch (config->udma_mask) {
case 0x00:
@@ -637,12 +654,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
return -ENODEV;
}
- if (config->flags & VIA_BAD_CLK66) {
- /* Disable the 66MHz clock on problem devices */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing &= ~0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- }
+ via_fixup(pdev, config);
/* We have established the device type, now fire it up */
return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0);
@@ -661,29 +673,14 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
static int via_reinit_one(struct pci_dev *pdev)
{
- u32 timing;
struct ata_host *host = dev_get_drvdata(&pdev->dev);
- const struct via_isa_bridge *config = host->private_data;
int rc;
rc = ata_pci_device_do_resume(pdev);
if (rc)
return rc;
- via_config_fifo(pdev, config->flags);
-
- if (config->udma_mask == ATA_UDMA4) {
- /* The 66 MHz devices require we enable the clock */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing |= 0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- }
- if (config->flags & VIA_BAD_CLK66) {
- /* Disable the 66MHz clock on problem devices */
- pci_read_config_dword(pdev, 0x50, &timing);
- timing &= ~0x80008;
- pci_write_config_dword(pdev, 0x50, timing);
- }
+ via_fixup(pdev, host->private_data);
ata_host_resume(host);
return 0;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 4b6b2090784..0b8b8b488ee 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -4087,8 +4087,11 @@ static int mv_platform_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "slots %u ports %d\n",
(unsigned)MV_MAX_Q_DEPTH, host->n_ports);
- return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
- IRQF_SHARED, &mv6_sht);
+ rc = ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
+ IRQF_SHARED, &mv6_sht);
+ if (!rc)
+ return 0;
+
err:
#if defined(CONFIG_HAVE_CLK)
if (!IS_ERR(hpriv->clk)) {
@@ -4110,8 +4113,7 @@ err:
*/
static int __devexit mv_platform_remove(struct platform_device *pdev)
{
- struct device *dev = &pdev->dev;
- struct ata_host *host = dev_get_drvdata(dev);
+ struct ata_host *host = platform_get_drvdata(pdev);
#if defined(CONFIG_HAVE_CLK)
struct mv_host_priv *hpriv = host->private_data;
#endif
@@ -4129,7 +4131,7 @@ static int __devexit mv_platform_remove(struct platform_device *pdev)
#ifdef CONFIG_PM
static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = platform_get_drvdata(pdev);
if (host)
return ata_host_suspend(host, state);
else
@@ -4138,7 +4140,7 @@ static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
static int mv_platform_resume(struct platform_device *pdev)
{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = platform_get_drvdata(pdev);
int ret;
if (host) {
@@ -4353,7 +4355,7 @@ static int mv_pci_init_one(struct pci_dev *pdev,
#ifdef CONFIG_PM
static int mv_pci_device_resume(struct pci_dev *pdev)
{
- struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ata_host *host = pci_get_drvdata(pdev);
int rc;
rc = ata_pci_device_do_resume(pdev);
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 55470f337e5..1e9140626a8 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -268,7 +268,7 @@ union sil24_cmd_block {
struct sil24_atapi_block atapi;
};
-static struct sil24_cerr_info {
+static const struct sil24_cerr_info {
unsigned int err_mask, action;
const char *desc;
} sil24_cerr_db[] = {
@@ -1019,7 +1019,7 @@ static void sil24_error_intr(struct ata_port *ap)
/* deal with command error */
if (irq_stat & PORT_IRQ_ERROR) {
- struct sil24_cerr_info *ci = NULL;
+ const struct sil24_cerr_info *ci = NULL;
unsigned int err_mask = 0, action = 0;
u32 context, cerr;
int pmp;