diff options
Diffstat (limited to 'drivers/atm')
| -rw-r--r-- | drivers/atm/fore200e.c | 11 | ||||
| -rw-r--r-- | drivers/atm/idt77252.c | 5 | ||||
| -rw-r--r-- | drivers/atm/lanai.c | 14 | ||||
| -rw-r--r-- | drivers/atm/nicstar.c | 4 |
4 files changed, 9 insertions, 25 deletions
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index bc53fed89b1..f7d6ebaa041 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -2064,12 +2064,10 @@ fore200e_get_esi(struct fore200e* fore200e) return -EBUSY; } - printk(FORE200E "device %s, rev. %c, S/N: %d, ESI: %02x:%02x:%02x:%02x:%02x:%02x\n", + printk(FORE200E "device %s, rev. %c, S/N: %d, ESI: %pM\n", fore200e->name, (prom->hw_revision & 0xFF) + '@', /* probably meaningless with SBA boards */ - prom->serial_number & 0xFFFF, - prom->mac_addr[ 2 ], prom->mac_addr[ 3 ], prom->mac_addr[ 4 ], - prom->mac_addr[ 5 ], prom->mac_addr[ 6 ], prom->mac_addr[ 7 ]); + prom->serial_number & 0xFFFF, &prom->mac_addr[2]); for (i = 0; i < ESI_LEN; i++) { fore200e->esi[ i ] = fore200e->atm_dev->esi[ i ] = prom->mac_addr[ i + 2 ]; @@ -2845,13 +2843,12 @@ fore200e_proc_read(struct atm_dev *dev, loff_t* pos, char* page) " interrupt line:\t\t%s\n" " physical base address:\t0x%p\n" " virtual base address:\t0x%p\n" - " factory address (ESI):\t%02x:%02x:%02x:%02x:%02x:%02x\n" + " factory address (ESI):\t%pM\n" " board serial number:\t\t%d\n\n", fore200e_irq_itoa(fore200e->irq), (void*)fore200e->phys_base, fore200e->virt_base, - fore200e->esi[0], fore200e->esi[1], fore200e->esi[2], - fore200e->esi[3], fore200e->esi[4], fore200e->esi[5], + fore200e->esi, fore200e->esi[4] * 256 + fore200e->esi[5]); return len; diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index e33ae0025b1..01f36c08cb5 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -3557,10 +3557,7 @@ init_card(struct atm_dev *dev) if (tmp) { memcpy(card->atmdev->esi, tmp->dev_addr, 6); - printk("%s: ESI %02x:%02x:%02x:%02x:%02x:%02x\n", - card->name, card->atmdev->esi[0], card->atmdev->esi[1], - card->atmdev->esi[2], card->atmdev->esi[3], - card->atmdev->esi[4], card->atmdev->esi[5]); + printk("%s: ESI %pM\n", card->name, card->atmdev->esi); } /* * XXX: </hack> diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c index cf97c34cbaf..7fe7c324e7e 100644 --- a/drivers/atm/lanai.c +++ b/drivers/atm/lanai.c @@ -998,9 +998,7 @@ static int __devinit eeprom_validate(struct lanai_dev *lanai) (unsigned int) e[EEPROM_MAC_REV + i]); return -EIO; } - DPRINTK("eeprom: MAC address = %02X:%02X:%02X:%02X:%02X:%02X\n", - e[EEPROM_MAC + 0], e[EEPROM_MAC + 1], e[EEPROM_MAC + 2], - e[EEPROM_MAC + 3], e[EEPROM_MAC + 4], e[EEPROM_MAC + 5]); + DPRINTK("eeprom: MAC address = %pM\n", &e[EEPROM_MAC]); /* Verify serial number */ lanai->serialno = eeprom_be4(lanai, EEPROM_SERIAL); v = eeprom_be4(lanai, EEPROM_SERIAL_REV); @@ -2483,14 +2481,8 @@ static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page) return sprintf(page, "revision: board=%d, pci_if=%d\n", lanai->board_rev, (int) lanai->pci->revision); if (left-- == 0) - return sprintf(page, "EEPROM ESI: " - "%02X:%02X:%02X:%02X:%02X:%02X\n", - lanai->eeprom[EEPROM_MAC + 0], - lanai->eeprom[EEPROM_MAC + 1], - lanai->eeprom[EEPROM_MAC + 2], - lanai->eeprom[EEPROM_MAC + 3], - lanai->eeprom[EEPROM_MAC + 4], - lanai->eeprom[EEPROM_MAC + 5]); + return sprintf(page, "EEPROM ESI: %pM\n", + &lanai->eeprom[EEPROM_MAC]); if (left-- == 0) return sprintf(page, "status: SOOL=%d, LOCD=%d, LED=%d, " "GPIN=%d\n", (lanai->status & STATUS_SOOL) ? 1 : 0, diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c index 3da804b1627..50838407b11 100644 --- a/drivers/atm/nicstar.c +++ b/drivers/atm/nicstar.c @@ -807,9 +807,7 @@ static int __devinit ns_init_card(int i, struct pci_dev *pcidev) } } - printk("nicstar%d: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n", i, - card->atmdev->esi[0], card->atmdev->esi[1], card->atmdev->esi[2], - card->atmdev->esi[3], card->atmdev->esi[4], card->atmdev->esi[5]); + printk("nicstar%d: MAC address %pM\n", i, card->atmdev->esi); card->atmdev->dev_data = card; card->atmdev->ci_range.vpi_bits = card->vpibits; |