diff options
Diffstat (limited to 'drivers/base/power/main.c')
| -rw-r--r-- | drivers/base/power/main.c | 98 |
1 files changed, 38 insertions, 60 deletions
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 69b4ddb7de3..fae72545898 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -315,13 +315,13 @@ static void pm_dev_err(struct device *dev, pm_message_t state, char *info, /*------------------------- Resume routines -------------------------*/ /** - * resume_device_noirq - Power on one device (early resume). + * device_resume_noirq - Power on one device (early resume). * @dev: Device. * @state: PM transition of the system being carried out. * * Must be called with interrupts disabled. */ -static int resume_device_noirq(struct device *dev, pm_message_t state) +static int device_resume_noirq(struct device *dev, pm_message_t state) { int error = 0; @@ -334,9 +334,6 @@ static int resume_device_noirq(struct device *dev, pm_message_t state) if (dev->bus->pm) { pm_dev_dbg(dev, state, "EARLY "); error = pm_noirq_op(dev, dev->bus->pm, state); - } else if (dev->bus->resume_early) { - pm_dev_dbg(dev, state, "legacy EARLY "); - error = dev->bus->resume_early(dev); } End: TRACE_RESUME(error); @@ -344,50 +341,40 @@ static int resume_device_noirq(struct device *dev, pm_message_t state) } /** - * dpm_power_up - Power on all regular (non-sysdev) devices. + * dpm_resume_noirq - Power on all regular (non-sysdev) devices. * @state: PM transition of the system being carried out. * - * Execute the appropriate "noirq resume" callback for all devices marked - * as DPM_OFF_IRQ. + * Call the "noirq" resume handlers for all devices marked as + * DPM_OFF_IRQ and enable device drivers to receive interrupts. * * Must be called under dpm_list_mtx. Device drivers should not receive * interrupts while it's being executed. */ -static void dpm_power_up(pm_message_t state) +void dpm_resume_noirq(pm_message_t state) { struct device *dev; + mutex_lock(&dpm_list_mtx); list_for_each_entry(dev, &dpm_list, power.entry) if (dev->power.status > DPM_OFF) { int error; dev->power.status = DPM_OFF; - error = resume_device_noirq(dev, state); + error = device_resume_noirq(dev, state); if (error) pm_dev_err(dev, state, " early", error); } -} - -/** - * device_power_up - Turn on all devices that need special attention. - * @state: PM transition of the system being carried out. - * - * Call the "early" resume handlers and enable device drivers to receive - * interrupts. - */ -void device_power_up(pm_message_t state) -{ - dpm_power_up(state); + mutex_unlock(&dpm_list_mtx); resume_device_irqs(); } -EXPORT_SYMBOL_GPL(device_power_up); +EXPORT_SYMBOL_GPL(dpm_resume_noirq); /** - * resume_device - Restore state for one device. + * device_resume - Restore state for one device. * @dev: Device. * @state: PM transition of the system being carried out. */ -static int resume_device(struct device *dev, pm_message_t state) +static int device_resume(struct device *dev, pm_message_t state) { int error = 0; @@ -412,9 +399,6 @@ static int resume_device(struct device *dev, pm_message_t state) if (dev->type->pm) { pm_dev_dbg(dev, state, "type "); error = pm_op(dev, dev->type->pm, state); - } else if (dev->type->resume) { - pm_dev_dbg(dev, state, "legacy type "); - error = dev->type->resume(dev); } if (error) goto End; @@ -460,7 +444,7 @@ static void dpm_resume(pm_message_t state) dev->power.status = DPM_RESUMING; mutex_unlock(&dpm_list_mtx); - error = resume_device(dev, state); + error = device_resume(dev, state); mutex_lock(&dpm_list_mtx); if (error) @@ -478,11 +462,11 @@ static void dpm_resume(pm_message_t state) } /** - * complete_device - Complete a PM transition for given device + * device_complete - Complete a PM transition for given device * @dev: Device. * @state: PM transition of the system being carried out. */ -static void complete_device(struct device *dev, pm_message_t state) +static void device_complete(struct device *dev, pm_message_t state) { down(&dev->sem); @@ -525,7 +509,7 @@ static void dpm_complete(pm_message_t state) dev->power.status = DPM_ON; mutex_unlock(&dpm_list_mtx); - complete_device(dev, state); + device_complete(dev, state); mutex_lock(&dpm_list_mtx); } @@ -538,19 +522,19 @@ static void dpm_complete(pm_message_t state) } /** - * device_resume - Restore state of each device in system. + * dpm_resume_end - Restore state of each device in system. * @state: PM transition of the system being carried out. * * Resume all the devices, unlock them all, and allow new * devices to be registered once again. */ -void device_resume(pm_message_t state) +void dpm_resume_end(pm_message_t state) { might_sleep(); dpm_resume(state); dpm_complete(state); } -EXPORT_SYMBOL_GPL(device_resume); +EXPORT_SYMBOL_GPL(dpm_resume_end); /*------------------------- Suspend routines -------------------------*/ @@ -575,13 +559,13 @@ static pm_message_t resume_event(pm_message_t sleep_state) } /** - * suspend_device_noirq - Shut down one device (late suspend). + * device_suspend_noirq - Shut down one device (late suspend). * @dev: Device. * @state: PM transition of the system being carried out. * * This is called with interrupts off and only a single CPU running. */ -static int suspend_device_noirq(struct device *dev, pm_message_t state) +static int device_suspend_noirq(struct device *dev, pm_message_t state) { int error = 0; @@ -591,49 +575,47 @@ static int suspend_device_noirq(struct device *dev, pm_message_t state) if (dev->bus->pm) { pm_dev_dbg(dev, state, "LATE "); error = pm_noirq_op(dev, dev->bus->pm, state); - } else if (dev->bus->suspend_late) { - pm_dev_dbg(dev, state, "legacy LATE "); - error = dev->bus->suspend_late(dev, state); - suspend_report_result(dev->bus->suspend_late, error); } return error; } /** - * device_power_down - Shut down special devices. + * dpm_suspend_noirq - Power down all regular (non-sysdev) devices. * @state: PM transition of the system being carried out. * - * Prevent device drivers from receiving interrupts and call the "late" + * Prevent device drivers from receiving interrupts and call the "noirq" * suspend handlers. * * Must be called under dpm_list_mtx. */ -int device_power_down(pm_message_t state) +int dpm_suspend_noirq(pm_message_t state) { struct device *dev; int error = 0; suspend_device_irqs(); + mutex_lock(&dpm_list_mtx); list_for_each_entry_reverse(dev, &dpm_list, power.entry) { - error = suspend_device_noirq(dev, state); + error = device_suspend_noirq(dev, state); if (error) { pm_dev_err(dev, state, " late", error); break; } dev->power.status = DPM_OFF_IRQ; } + mutex_unlock(&dpm_list_mtx); if (error) - device_power_up(resume_event(state)); + dpm_resume_noirq(resume_event(state)); return error; } -EXPORT_SYMBOL_GPL(device_power_down); +EXPORT_SYMBOL_GPL(dpm_suspend_noirq); /** - * suspend_device - Save state of one device. + * device_suspend - Save state of one device. * @dev: Device. * @state: PM transition of the system being carried out. */ -static int suspend_device(struct device *dev, pm_message_t state) +static int device_suspend(struct device *dev, pm_message_t state) { int error = 0; @@ -656,10 +638,6 @@ static int suspend_device(struct device *dev, pm_message_t state) if (dev->type->pm) { pm_dev_dbg(dev, state, "type "); error = pm_op(dev, dev->type->pm, state); - } else if (dev->type->suspend) { - pm_dev_dbg(dev, state, "legacy type "); - error = dev->type->suspend(dev, state); - suspend_report_result(dev->type->suspend, error); } if (error) goto End; @@ -700,7 +678,7 @@ static int dpm_suspend(pm_message_t state) get_device(dev); mutex_unlock(&dpm_list_mtx); - error = suspend_device(dev, state); + error = device_suspend(dev, state); mutex_lock(&dpm_list_mtx); if (error) { @@ -719,11 +697,11 @@ static int dpm_suspend(pm_message_t state) } /** - * prepare_device - Execute the ->prepare() callback(s) for given device. + * device_prepare - Execute the ->prepare() callback(s) for given device. * @dev: Device. * @state: PM transition of the system being carried out. */ -static int prepare_device(struct device *dev, pm_message_t state) +static int device_prepare(struct device *dev, pm_message_t state) { int error = 0; @@ -777,7 +755,7 @@ static int dpm_prepare(pm_message_t state) dev->power.status = DPM_PREPARING; mutex_unlock(&dpm_list_mtx); - error = prepare_device(dev, state); + error = device_prepare(dev, state); mutex_lock(&dpm_list_mtx); if (error) { @@ -803,12 +781,12 @@ static int dpm_prepare(pm_message_t state) } /** - * device_suspend - Save state and stop all devices in system. + * dpm_suspend_start - Save state and stop all devices in system. * @state: PM transition of the system being carried out. * * Prepare and suspend all devices. */ -int device_suspend(pm_message_t state) +int dpm_suspend_start(pm_message_t state) { int error; @@ -818,7 +796,7 @@ int device_suspend(pm_message_t state) error = dpm_suspend(state); return error; } -EXPORT_SYMBOL_GPL(device_suspend); +EXPORT_SYMBOL_GPL(dpm_suspend_start); void __suspend_report_result(const char *function, void *fn, int ret) { |