3 files changed, 116 insertions, 48 deletions

diff --git a/drivers/base/power/resume.c b/drivers/base/power/resume.c
index 826093ef4c7..020be36705a 100644
--- a/drivers/base/power/resume.c
+++ b/drivers/base/power/resume.c
@@ -38,13 +38,35 @@ int resume_device(struct device * dev)
 		dev_dbg(dev,"resuming\n");
 		error = dev->bus->resume(dev);
 	}
+	if (dev->class && dev->class->resume) {
+		dev_dbg(dev,"class resume\n");
+		error = dev->class->resume(dev);
+	}
 	up(&dev->sem);
 	TRACE_RESUME(error);
 	return error;
 }
 
 
+static int resume_device_early(struct device * dev)
+{
+	int error = 0;
 
+	TRACE_DEVICE(dev);
+	TRACE_RESUME(0);
+	if (dev->bus && dev->bus->resume_early) {
+		dev_dbg(dev,"EARLY resume\n");
+		error = dev->bus->resume_early(dev);
+	}
+	TRACE_RESUME(error);
+	return error;
+}
+
+/*
+ * Resume the devices that have either not gone through
+ * the late suspend, or that did go through it but also
+ * went through the early resume
+ */
 void dpm_resume(void)
 {
 	down(&dpm_list_sem);
@@ -74,6 +96,7 @@ void dpm_resume(void)
 
 void device_resume(void)
 {
+	might_sleep();
 	down(&dpm_sem);
 	dpm_resume();
 	up(&dpm_sem);
@@ -83,12 +106,12 @@ EXPORT_SYMBOL_GPL(device_resume);
 
 
 /**
- *	device_power_up_irq - Power on some devices.
+ *	dpm_power_up - Power on some devices.
  *
  *	Walk the dpm_off_irq list and power each device up. This
  *	is used for devices that required they be powered down with
- *	interrupts disabled. As devices are powered on, they are moved to
- *	the dpm_suspended list.
+ *	interrupts disabled. As devices are powered on, they are moved
+ *	to the dpm_active list.
  *
  *	Interrupts must be disabled when calling this.
  */
@@ -99,16 +122,14 @@ void dpm_power_up(void)
 		struct list_head * entry = dpm_off_irq.next;
 		struct device * dev = to_device(entry);
 
-		get_device(dev);
-		list_move_tail(entry, &dpm_active);
-		resume_device(dev);
-		put_device(dev);
+		list_move_tail(entry, &dpm_off);
+		resume_device_early(dev);
 	}
 }
 
 
 /**
- *	device_pm_power_up - Turn on all devices that need special attention.
+ *	device_power_up - Turn on all devices that need special attention.
  *
  *	Power on system devices then devices that required we shut them down
  *	with interrupts disabled.
diff --git a/drivers/base/power/suspend.c b/drivers/base/power/suspend.c
index 69509e02f70..ece136bf97e 100644
--- a/drivers/base/power/suspend.c
+++ b/drivers/base/power/suspend.c
@@ -34,6 +34,7 @@ static inline char *suspend_verb(u32 event)
 	switch (event) {
 	case PM_EVENT_SUSPEND:	return "suspend";
 	case PM_EVENT_FREEZE:	return "freeze";
+	case PM_EVENT_PRETHAW:	return "prethaw";
 	default:		return "(unknown suspend event)";
 	}
 }
@@ -65,7 +66,19 @@ int suspend_device(struct device * dev, pm_message_t state)
 
 	dev->power.prev_state = dev->power.power_state;
 
-	if (dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
+	if (dev->class && dev->class->suspend && !dev->power.power_state.event) {
+		dev_dbg(dev, "class %s%s\n",
+			suspend_verb(state.event),
+			((state.event == PM_EVENT_SUSPEND)
+					&& device_may_wakeup(dev))
+				? ", may wakeup"
+				: ""
+			);
+		error = dev->class->suspend(dev, state);
+		suspend_report_result(dev->class->suspend, error);
+	}
+
+	if (!error && dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
 		dev_dbg(dev, "%s%s\n",
 			suspend_verb(state.event),
 			((state.event == PM_EVENT_SUSPEND)
@@ -81,15 +94,42 @@ int suspend_device(struct device * dev, pm_message_t state)
 }
 
 
+/*
+ * This is called with interrupts off, only a single CPU
+ * running. We can't do down() on a semaphore (and we don't
+ * need the protection)
+ */
+static int suspend_device_late(struct device *dev, pm_message_t state)
+{
+	int error = 0;
+
+	if (dev->bus && dev->bus->suspend_late && !dev->power.power_state.event) {
+		dev_dbg(dev, "LATE %s%s\n",
+			suspend_verb(state.event),
+			((state.event == PM_EVENT_SUSPEND)
+					&& device_may_wakeup(dev))
+				? ", may wakeup"
+				: ""
+			);
+		error = dev->bus->suspend_late(dev, state);
+		suspend_report_result(dev->bus->suspend_late, error);
+	}
+	return error;
+}
+
 /**
  *	device_suspend - Save state and stop all devices in system.
  *	@state:		Power state to put each device in.
  *
  *	Walk the dpm_active list, call ->suspend() for each device, and move
- *	it to dpm_off.
- *	Check the return value for each. If it returns 0, then we move the
- *	the device to the dpm_off list. If it returns -EAGAIN, we move it to
- *	the dpm_off_irq list. If we get a different error, try and back out.
+ *	it to the dpm_off list.
+ *
+ *	(For historical reasons, if it returns -EAGAIN, that used to mean
+ *	that the device would be called again with interrupts disabled.
+ *	These days, we use the "suspend_late()" callback for that, so we
+ *	print a warning and consider it an error).
+ *
+ *	If we get a different error, try and back out.
  *
  *	If we hit a failure with any of the devices, call device_resume()
  *	above to bring the suspended devices back to life.
@@ -100,6 +140,7 @@ int device_suspend(pm_message_t state)
 {
 	int error = 0;
 
+	might_sleep();
 	down(&dpm_sem);
 	down(&dpm_list_sem);
 	while (!list_empty(&dpm_active) && error == 0) {
@@ -115,39 +156,27 @@ int device_suspend(pm_message_t state)
 
 		/* Check if the device got removed */
 		if (!list_empty(&dev->power.entry)) {
-			/* Move it to the dpm_off or dpm_off_irq list */
+			/* Move it to the dpm_off list */
 			if (!error)
 				list_move(&dev->power.entry, &dpm_off);
-			else if (error == -EAGAIN) {
-				list_move(&dev->power.entry, &dpm_off_irq);
-				error = 0;
-			}
 		}
 		if (error)
 			printk(KERN_ERR "Could not suspend device %s: "
-				"error %d\n", kobject_name(&dev->kobj), error);
+				"error %d%s\n",
+				kobject_name(&dev->kobj), error,
+				error == -EAGAIN ? " (please convert to suspend_late)" : "");
 		put_device(dev);
 	}
 	up(&dpm_list_sem);
-	if (error) {
-		/* we failed... before resuming, bring back devices from
-		 * dpm_off_irq list back to main dpm_off list, we do want
-		 * to call resume() on them, in case they partially suspended
-		 * despite returning -EAGAIN
-		 */
-		while (!list_empty(&dpm_off_irq)) {
-			struct list_head * entry = dpm_off_irq.next;
-			list_move(entry, &dpm_off);
-		}
+	if (error)
 		dpm_resume();
-	}
+
 	up(&dpm_sem);
 	return error;
 }
 
 EXPORT_SYMBOL_GPL(device_suspend);
 
-
 /**
  *	device_power_down - Shut down special devices.
  *	@state:		Power state to enter.
@@ -162,14 +191,17 @@ int device_power_down(pm_message_t state)
 	int error = 0;
 	struct device * dev;
 
-	list_for_each_entry_reverse(dev, &dpm_off_irq, power.entry) {
-		if ((error = suspend_device(dev, state)))
-			break;
+	while (!list_empty(&dpm_off)) {
+		struct list_head * entry = dpm_off.prev;
+
+		dev = to_device(entry);
+		error = suspend_device_late(dev, state);
+		if (error)
+			goto Error;
+		list_move(&dev->power.entry, &dpm_off_irq);
 	}
-	if (error)
-		goto Error;
-	if ((error = sysdev_suspend(state)))
-		goto Error;
+
+	error = sysdev_suspend(state);
  Done:
 	return error;
  Error:
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 40d7242a07c..2d47517dbe3 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -7,22 +7,29 @@
 #include "power.h"
 
 
+#ifdef	CONFIG_PM_SYSFS_DEPRECATED
+
 /**
  *	state - Control current power state of device
  *
  *	show() returns the current power state of the device. '0' indicates
- *	the device is on. Other values (1-3) indicate the device is in a low
+ *	the device is on. Other values (2) indicate the device is in some low
  *	power state.
  *
- *	store() sets the current power state, which is an integer value
- *	between 0-3. If the device is on ('0'), and the value written is
- *	greater than 0, then the device is placed directly into the low-power
- *	state (via its driver's ->suspend() method).
- *	If the device is currently in a low-power state, and the value is 0,
- *	the device is powered back on (via the ->resume() method).
- *	If the device is in a low-power state, and a different low-power state
- *	is requested, the device is first resumed, then suspended into the new
- *	low-power state.
+ *	store() sets the current power state, which is an integer valued
+ *	0, 2, or 3.  Devices with bus.suspend_late(), or bus.resume_early()
+ *	methods fail this operation; those methods couldn't be called.
+ *	Otherwise,
+ *
+ *	- If the recorded dev->power.power_state.event matches the
+ *	  target value, nothing is done.
+ *	- If the recorded event code is nonzero, the device is reactivated
+ *	  by calling bus.resume() and/or class.resume().
+ *	- If the target value is nonzero, the device is suspended by
+ *	  calling class.suspend() and/or bus.suspend() with event code
+ *	  PM_EVENT_SUSPEND.
+ *
+ *	This mechanism is DEPRECATED and should only be used for testing.
  */
 
 static ssize_t state_show(struct device * dev, struct device_attribute *attr, char * buf)
@@ -38,6 +45,10 @@ static ssize_t state_store(struct device * dev, struct device_attribute *attr, c
 	pm_message_t state;
 	int error = -EINVAL;
 
+	/* disallow incomplete suspend sequences */
+	if (dev->bus && (dev->bus->suspend_late || dev->bus->resume_early))
+		return error;
+
 	state.event = PM_EVENT_SUSPEND;
 	/* Older apps expected to write "3" here - confused with PCI D3 */
 	if ((n == 1) && !strcmp(buf, "3"))
@@ -57,6 +68,8 @@ static ssize_t state_store(struct device * dev, struct device_attribute *attr, c
 static DEVICE_ATTR(state, 0644, state_show, state_store);
 
 
+#endif	/* CONFIG_PM_SYSFS_DEPRECATED */
+
 /*
  *	wakeup - Report/change current wakeup option for device
  *
@@ -130,7 +143,9 @@ static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
 
 
 static struct attribute * power_attrs[] = {
+#ifdef	CONFIG_PM_SYSFS_DEPRECATED
 	&dev_attr_state.attr,
+#endif
 	&dev_attr_wakeup.attr,
 	NULL,
 };