diff options
Diffstat (limited to 'drivers/base')
| -rw-r--r-- | drivers/base/Kconfig | 64 | ||||
| -rw-r--r-- | drivers/base/firmware_class.c | 35 | ||||
| -rw-r--r-- | drivers/base/platform.c | 296 | ||||
| -rw-r--r-- | drivers/base/power/main.c | 675 | ||||
| -rw-r--r-- | drivers/base/power/power.h | 2 | ||||
| -rw-r--r-- | drivers/base/power/sysfs.c | 3 | ||||
| -rw-r--r-- | drivers/base/power/trace.c | 4 | ||||
| -rw-r--r-- | drivers/base/topology.c | 32 |
8 files changed, 916 insertions, 195 deletions
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index d7da109c24f..d47482fa1d2 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -34,6 +34,70 @@ config FW_LOADER require userspace firmware loading support, but a module built outside the kernel tree does. +config FIRMWARE_IN_KERNEL + bool "Include in-kernel firmware blobs in kernel binary" + depends on FW_LOADER + default y + help + The kernel source tree includes a number of firmware 'blobs' + which are used by various drivers. The recommended way to + use these is to run "make firmware_install" and to copy the + resulting binary files created in usr/lib/firmware directory + of the kernel tree to the /lib/firmware on your system so + that they can be loaded by userspace helpers on request. + + Enabling this option will build each required firmware blob + into the kernel directly, where request_firmware() will find + them without having to call out to userspace. This may be + useful if your root file system requires a device which uses + such firmware, and do not wish to use an initrd. + + This single option controls the inclusion of firmware for + every driver which usees request_firmare() and ships its + firmware in the kernel source tree, to avoid a proliferation + of 'Include firmware for xxx device' options. + + Say 'N' and let firmware be loaded from userspace. + +config EXTRA_FIRMWARE + string "External firmware blobs to build into the kernel binary" + depends on FW_LOADER + help + This option allows firmware to be built into the kernel, for the + cases where the user either cannot or doesn't want to provide it from + userspace at runtime (for example, when the firmware in question is + required for accessing the boot device, and the user doesn't want to + use an initrd). + + This option is a string, and takes the (space-separated) names of the + firmware files -- the same names which appear in MODULE_FIRMWARE() + and request_firmware() in the source. These files should exist under + the directory specified by the EXTRA_FIRMWARE_DIR option, which is + by default the firmware/ subdirectory of the kernel source tree. + + So, for example, you might set CONFIG_EXTRA_FIRMWARE="usb8388.bin", + copy the usb8388.bin file into the firmware/ directory, and build the + kernel. Then any request_firmware("usb8388.bin") will be + satisfied internally without needing to call out to userspace. + + WARNING: If you include additional firmware files into your binary + kernel image which are not available under the terms of the GPL, + then it may be a violation of the GPL to distribute the resulting + image -- since it combines both GPL and non-GPL work. You should + consult a lawyer of your own before distributing such an image. + +config EXTRA_FIRMWARE_DIR + string "Firmware blobs root directory" + depends on EXTRA_FIRMWARE != "" + default "firmware" + help + This option controls the directory in which the kernel build system + looks for the firmware files listed in the EXTRA_FIRMWARE option. + The default is the firmware/ directory in the kernel source tree, + but by changing this option you can point it elsewhere, such as + the /lib/firmware/ directory or another separate directory + containing firmware files. + config DEBUG_DRIVER bool "Driver Core verbose debug messages" depends on DEBUG_KERNEL diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c index 9fd4a853414..b0be1d18fee 100644 --- a/drivers/base/firmware_class.c +++ b/drivers/base/firmware_class.c @@ -49,6 +49,14 @@ struct firmware_priv { struct timer_list timeout; }; +#ifdef CONFIG_FW_LOADER +extern struct builtin_fw __start_builtin_fw[]; +extern struct builtin_fw __end_builtin_fw[]; +#else /* Module case. Avoid ifdefs later; it'll all optimise out */ +static struct builtin_fw *__start_builtin_fw; +static struct builtin_fw *__end_builtin_fw; +#endif + static void fw_load_abort(struct firmware_priv *fw_priv) { @@ -257,7 +265,7 @@ firmware_data_write(struct kobject *kobj, struct bin_attribute *bin_attr, if (retval) goto out; - memcpy(fw->data + offset, buffer, count); + memcpy((u8 *)fw->data + offset, buffer, count); fw->size = max_t(size_t, offset + count, fw->size); retval = count; @@ -391,13 +399,12 @@ _request_firmware(const struct firmware **firmware_p, const char *name, struct device *f_dev; struct firmware_priv *fw_priv; struct firmware *firmware; + struct builtin_fw *builtin; int retval; if (!firmware_p) return -EINVAL; - printk(KERN_INFO "firmware: requesting %s\n", name); - *firmware_p = firmware = kzalloc(sizeof(*firmware), GFP_KERNEL); if (!firmware) { printk(KERN_ERR "%s: kmalloc(struct firmware) failed\n", @@ -406,6 +413,20 @@ _request_firmware(const struct firmware **firmware_p, const char *name, goto out; } + for (builtin = __start_builtin_fw; builtin != __end_builtin_fw; + builtin++) { + if (strcmp(name, builtin->name)) + continue; + printk(KERN_INFO "firmware: using built-in firmware %s\n", + name); + firmware->size = builtin->size; + firmware->data = builtin->data; + return 0; + } + + if (uevent) + printk(KERN_INFO "firmware: requesting %s\n", name); + retval = fw_setup_device(firmware, &f_dev, name, device, uevent); if (retval) goto error_kfree_fw; @@ -473,8 +494,16 @@ request_firmware(const struct firmware **firmware_p, const char *name, void release_firmware(const struct firmware *fw) { + struct builtin_fw *builtin; + if (fw) { + for (builtin = __start_builtin_fw; builtin != __end_builtin_fw; + builtin++) { + if (fw->data == builtin->data) + goto free_fw; + } vfree(fw->data); + free_fw: kfree(fw); } } diff --git a/drivers/base/platform.c b/drivers/base/platform.c index 911ec600fe7..3f940393d6c 100644 --- a/drivers/base/platform.c +++ b/drivers/base/platform.c @@ -453,6 +453,8 @@ int platform_driver_register(struct platform_driver *drv) drv->driver.suspend = platform_drv_suspend; if (drv->resume) drv->driver.resume = platform_drv_resume; + if (drv->pm) + drv->driver.pm = &drv->pm->base; return driver_register(&drv->driver); } EXPORT_SYMBOL_GPL(platform_driver_register); @@ -560,7 +562,9 @@ static int platform_match(struct device *dev, struct device_driver *drv) return (strncmp(pdev->name, drv->name, BUS_ID_SIZE) == 0); } -static int platform_suspend(struct device *dev, pm_message_t mesg) +#ifdef CONFIG_PM_SLEEP + +static int platform_legacy_suspend(struct device *dev, pm_message_t mesg) { int ret = 0; @@ -570,7 +574,7 @@ static int platform_suspend(struct device *dev, pm_message_t mesg) return ret; } -static int platform_suspend_late(struct device *dev, pm_message_t mesg) +static int platform_legacy_suspend_late(struct device *dev, pm_message_t mesg) { struct platform_driver *drv = to_platform_driver(dev->driver); struct platform_device *pdev; @@ -583,7 +587,7 @@ static int platform_suspend_late(struct device *dev, pm_message_t mesg) return ret; } -static int platform_resume_early(struct device *dev) +static int platform_legacy_resume_early(struct device *dev) { struct platform_driver *drv = to_platform_driver(dev->driver); struct platform_device *pdev; @@ -596,7 +600,7 @@ static int platform_resume_early(struct device *dev) return ret; } -static int platform_resume(struct device *dev) +static int platform_legacy_resume(struct device *dev) { int ret = 0; @@ -606,15 +610,291 @@ static int platform_resume(struct device *dev) return ret; } +static int platform_pm_prepare(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm && drv->pm->prepare) + ret = drv->pm->prepare(dev); + + return ret; +} + +static void platform_pm_complete(struct device *dev) +{ + struct device_driver *drv = dev->driver; + + if (drv && drv->pm && drv->pm->complete) + drv->pm->complete(dev); +} + +#ifdef CONFIG_SUSPEND + +static int platform_pm_suspend(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->suspend) + ret = drv->pm->suspend(dev); + } else { + ret = platform_legacy_suspend(dev, PMSG_SUSPEND); + } + + return ret; +} + +static int platform_pm_suspend_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->suspend_noirq) + ret = pdrv->pm->suspend_noirq(dev); + } else { + ret = platform_legacy_suspend_late(dev, PMSG_SUSPEND); + } + + return ret; +} + +static int platform_pm_resume(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->resume) + ret = drv->pm->resume(dev); + } else { + ret = platform_legacy_resume(dev); + } + + return ret; +} + +static int platform_pm_resume_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->resume_noirq) + ret = pdrv->pm->resume_noirq(dev); + } else { + ret = platform_legacy_resume_early(dev); + } + + return ret; +} + +#else /* !CONFIG_SUSPEND */ + +#define platform_pm_suspend NULL +#define platform_pm_resume NULL +#define platform_pm_suspend_noirq NULL +#define platform_pm_resume_noirq NULL + +#endif /* !CONFIG_SUSPEND */ + +#ifdef CONFIG_HIBERNATION + +static int platform_pm_freeze(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (!drv) + return 0; + + if (drv->pm) { + if (drv->pm->freeze) + ret = drv->pm->freeze(dev); + } else { + ret = platform_legacy_suspend(dev, PMSG_FREEZE); + } + + return ret; +} + +static int platform_pm_freeze_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->freeze_noirq) + ret = pdrv->pm->freeze_noirq(dev); + } else { + ret = platform_legacy_suspend_late(dev, PMSG_FREEZE); + } + + return ret; +} + +static int platform_pm_thaw(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->thaw) + ret = drv->pm->thaw(dev); + } else { + ret = platform_legacy_resume(dev); + } + + return ret; +} + +static int platform_pm_thaw_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->thaw_noirq) + ret = pdrv->pm->thaw_noirq(dev); + } else { + ret = platform_legacy_resume_early(dev); + } + + return ret; +} + +static int platform_pm_poweroff(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->poweroff) + ret = drv->pm->poweroff(dev); + } else { + ret = platform_legacy_suspend(dev, PMSG_HIBERNATE); + } + + return ret; +} + +static int platform_pm_poweroff_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->poweroff_noirq) + ret = pdrv->pm->poweroff_noirq(dev); + } else { + ret = platform_legacy_suspend_late(dev, PMSG_HIBERNATE); + } + + return ret; +} + +static int platform_pm_restore(struct device *dev) +{ + struct device_driver *drv = dev->driver; + int ret = 0; + + if (drv && drv->pm) { + if (drv->pm->restore) + ret = drv->pm->restore(dev); + } else { + ret = platform_legacy_resume(dev); + } + + return ret; +} + +static int platform_pm_restore_noirq(struct device *dev) +{ + struct platform_driver *pdrv; + int ret = 0; + + if (!dev->driver) + return 0; + + pdrv = to_platform_driver(dev->driver); + if (pdrv->pm) { + if (pdrv->pm->restore_noirq) + ret = pdrv->pm->restore_noirq(dev); + } else { + ret = platform_legacy_resume_early(dev); + } + + return ret; +} + +#else /* !CONFIG_HIBERNATION */ + +#define platform_pm_freeze NULL +#define platform_pm_thaw NULL +#define platform_pm_poweroff NULL +#define platform_pm_restore NULL +#define platform_pm_freeze_noirq NULL +#define platform_pm_thaw_noirq NULL +#define platform_pm_poweroff_noirq NULL +#define platform_pm_restore_noirq NULL + +#endif /* !CONFIG_HIBERNATION */ + +struct pm_ext_ops platform_pm_ops = { + .base = { + .prepare = platform_pm_prepare, + .complete = platform_pm_complete, + .suspend = platform_pm_suspend, + .resume = platform_pm_resume, + .freeze = platform_pm_freeze, + .thaw = platform_pm_thaw, + .poweroff = platform_pm_poweroff, + .restore = platform_pm_restore, + }, + .suspend_noirq = platform_pm_suspend_noirq, + .resume_noirq = platform_pm_resume_noirq, + .freeze_noirq = platform_pm_freeze_noirq, + .thaw_noirq = platform_pm_thaw_noirq, + .poweroff_noirq = platform_pm_poweroff_noirq, + .restore_noirq = platform_pm_restore_noirq, +}; + +#define PLATFORM_PM_OPS_PTR &platform_pm_ops + +#else /* !CONFIG_PM_SLEEP */ + +#define PLATFORM_PM_OPS_PTR NULL + +#endif /* !CONFIG_PM_SLEEP */ + struct bus_type platform_bus_type = { .name = "platform", .dev_attrs = platform_dev_attrs, .match = platform_match, .uevent = platform_uevent, - .suspend = platform_suspend, - .suspend_late = platform_suspend_late, - .resume_early = platform_resume_early, - .resume = platform_resume, + .pm = PLATFORM_PM_OPS_PTR, }; EXPORT_SYMBOL_GPL(platform_bus_type); diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index 45cc3d9eacb..3250c5257b7 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -12,11 +12,9 @@ * and add it to the list of power-controlled devices. sysfs entries for * controlling device power management will also be added. * - * A different set of lists than the global subsystem list are used to - * keep track of power info because we use different lists to hold - * devices based on what stage of the power management process they - * are in. The power domain dependencies may also differ from the - * ancestral dependencies that the subsystem list maintains. + * A separate list is used for keeping track of power info, because the power + * domain dependencies may differ from the ancestral dependencies that the + * subsystem list maintains. */ #include <linux/device.h> @@ -30,31 +28,40 @@ #include "power.h" /* - * The entries in the dpm_active list are in a depth first order, simply + * The entries in the dpm_list list are in a depth first order, simply * because children are guaranteed to be discovered after parents, and * are inserted at the back of the list on discovery. * - * All the other lists are kept in the same order, for consistency. - * However the lists aren't always traversed in the same order. - * Semaphores must be acquired from the top (i.e., front) down - * and released in the opposite order. Devices must be suspended - * from the bottom (i.e., end) up and resumed in the opposite order. - * That way no parent will be suspended while it still has an active - * child. - * * Since device_pm_add() may be called with a device semaphore held, * we must never try to acquire a device semaphore while holding * dpm_list_mutex. */ -LIST_HEAD(dpm_active); -static LIST_HEAD(dpm_off); -static LIST_HEAD(dpm_off_irq); +LIST_HEAD(dpm_list); static DEFINE_MUTEX(dpm_list_mtx); -/* 'true' if all devices have been suspended, protected by dpm_list_mtx */ -static bool all_sleeping; +/* + * Set once the preparation of devices for a PM transition has started, reset + * before starting to resume devices. Protected by dpm_list_mtx. + */ +static bool transition_started; + +/** + * device_pm_lock - lock the list of active devices used by the PM core + */ +void device_pm_lock(void) +{ + mutex_lock(&dpm_list_mtx); +} + +/** + * device_pm_unlock - unlock the list of active devices used by the PM core + */ +void device_pm_unlock(void) +{ + mutex_unlock(&dpm_list_mtx); +} /** * device_pm_add - add a device to the list of active devices @@ -68,17 +75,25 @@ int device_pm_add(struct device *dev) dev->bus ? dev->bus->name : "No Bus", kobject_name(&dev->kobj)); mutex_lock(&dpm_list_mtx); - if ((dev->parent && dev->parent->power.sleeping) || all_sleeping) { - if (dev->parent->power.sleeping) - dev_warn(dev, "parent %s is sleeping\n", + if (dev->parent) { + if (dev->parent->power.status >= DPM_SUSPENDING) { + dev_warn(dev, "parent %s is sleeping, will not add\n", dev->parent->bus_id); - else - dev_warn(dev, "all devices are sleeping\n"); + WARN_ON(true); + } + } else if (transition_started) { + /* + * We refuse to register parentless devices while a PM + * transition is in progress in order to avoid leaving them + * unhandled down the road + */ WARN_ON(true); } error = dpm_sysfs_add(dev); - if (!error) - list_add_tail(&dev->power.entry, &dpm_active); + if (!error) { + dev->power.status = DPM_ON; + list_add_tail(&dev->power.entry, &dpm_list); + } mutex_unlock(&dpm_list_mtx); return error; } @@ -100,73 +115,243 @@ void device_pm_remove(struct device *dev) mutex_unlock(&dpm_list_mtx); } +/** + * pm_op - execute the PM operation appropiate for given PM event + * @dev: Device. + * @ops: PM operations to choose from. + * @state: PM transition of the system being carried out. + */ +static int pm_op(struct device *dev, struct pm_ops *ops, pm_message_t state) +{ + int error = 0; + + switch (state.event) { +#ifdef CONFIG_SUSPEND + case PM_EVENT_SUSPEND: + if (ops->suspend) { + error = ops->suspend(dev); + suspend_report_result(ops->suspend, error); + } + break; + case PM_EVENT_RESUME: + if (ops->resume) { + error = ops->resume(dev); + suspend_report_result(ops->resume, error); + } + break; +#endif /* CONFIG_SUSPEND */ +#ifdef CONFIG_HIBERNATION + case PM_EVENT_FREEZE: + case PM_EVENT_QUIESCE: + if (ops->freeze) { + error = ops->freeze(dev); + suspend_report_result(ops->freeze, error); + } + break; + case PM_EVENT_HIBERNATE: + if (ops->poweroff) { + error = ops->poweroff(dev); + suspend_report_result(ops->poweroff, error); + } + break; + case PM_EVENT_THAW: + case PM_EVENT_RECOVER: + if (ops->thaw) { + error = ops->thaw(dev); + suspend_report_result(ops->thaw, error); + } + break; + case PM_EVENT_RESTORE: + if (ops->restore) { + error = ops->restore(dev); + suspend_report_result(ops->restore, error); + } + break; +#endif /* CONFIG_HIBERNATION */ + default: + error = -EINVAL; + } + return error; +} + +/** + * pm_noirq_op - execute the PM operation appropiate for given PM event + * @dev: Device. + * @ops: PM operations to choose from. + * @state: PM transition of the system being carried out. + * + * The operation is executed with interrupts disabled by the only remaining + * functional CPU in the system. + */ +static int pm_noirq_op(struct device *dev, struct pm_ext_ops *ops, + pm_message_t state) +{ + int error = 0; + + switch (state.event) { +#ifdef CONFIG_SUSPEND + case PM_EVENT_SUSPEND: + if (ops->suspend_noirq) { + error = ops->suspend_noirq(dev); + suspend_report_result(ops->suspend_noirq, error); + } + break; + case PM_EVENT_RESUME: + if (ops->resume_noirq) { + error = ops->resume_noirq(dev); + suspend_report_result(ops->resume_noirq, error); + } + break; +#endif /* CONFIG_SUSPEND */ +#ifdef CONFIG_HIBERNATION + case PM_EVENT_FREEZE: + case PM_EVENT_QUIESCE: + if (ops->freeze_noirq) { + error = ops->freeze_noirq(dev); + suspend_report_result(ops->freeze_noirq, error); + } + break; + case PM_EVENT_HIBERNATE: + if (ops->poweroff_noirq) { + error = ops->poweroff_noirq(dev); + suspend_report_result(ops->poweroff_noirq, error); + } + break; + case PM_EVENT_THAW: + case PM_EVENT_RECOVER: + if (ops->thaw_noirq) { + error = ops->thaw_noirq(dev); + suspend_report_result(ops->thaw_noirq, error); + } + break; + case PM_EVENT_RESTORE: + if (ops->restore_noirq) { + error = ops->restore_noirq(dev); + suspend_report_result(ops->restore_noirq, error); + } + break; +#endif /* CONFIG_HIBERNATION */ + default: + error = -EINVAL; + } + return error; +} + +static char *pm_verb(int event) +{ + switch (event) { + case PM_EVENT_SUSPEND: + return "suspend"; + case PM_EVENT_RESUME: + return "resume"; + case PM_EVENT_FREEZE: + return "freeze"; + case PM_EVENT_QUIESCE: + return "quiesce"; + case PM_EVENT_HIBERNATE: + return "hibernate"; + case PM_EVENT_THAW: + return "thaw"; + case PM_EVENT_RESTORE: + return "restore"; + case PM_EVENT_RECOVER: + return "recover"; + default: + return "(unknown PM event)"; + } +} + +static void pm_dev_dbg(struct device *dev, pm_message_t state, char *info) +{ + dev_dbg(dev, "%s%s%s\n", info, pm_verb(state.event), + ((state.event & PM_EVENT_SLEEP) && device_may_wakeup(dev)) ? + ", may wakeup" : ""); +} + +static void pm_dev_err(struct device *dev, pm_message_t state, char *info, + int error) +{ + printk(KERN_ERR "PM: Device %s failed to %s%s: error %d\n", + kobject_name(&dev->kobj), pm_verb(state.event), info, error); +} + /*------------------------- Resume routines -------------------------*/ /** - * resume_device_early - Power on one device (early resume). + * resume_device_noirq - Power on one device (early resume). * @dev: Device. + * @state: PM transition of the system being carried out. * * Must be called with interrupts disabled. */ -static int resume_device_early(struct device *dev) +static int resume_device_noirq(struct device *dev, pm_message_t state) { int error = 0; TRACE_DEVICE(dev); TRACE_RESUME(0); - if (dev->bus && dev->bus->resume_early) { - dev_dbg(dev, "EARLY resume\n"); + if (!dev->bus) + goto End; + + if (dev->bus->pm) { + pm_dev_dbg(dev, state, "EARLY "); + error = pm_noirq_op(dev, dev->bus->pm, state); + } else if (dev->bus->resume_early) { + pm_dev_dbg(dev, state, "legacy EARLY "); error = dev->bus->resume_early(dev); } - + End: TRACE_RESUME(error); return error; } /** * dpm_power_up - Power on all regular (non-sysdev) devices. + * @state: PM transition of the system being carried out. * - * Walk the dpm_off_irq list and power each device up. This - * is used for devices that required they be powered down with - * interrupts disabled. As devices are powered on, they are moved - * to the dpm_off list. + * Execute the appropriate "noirq resume" callback for all devices marked + * as DPM_OFF_IRQ. * * Must be called with interrupts disabled and only one CPU running. */ -static void dpm_power_up(void) +static void dpm_power_up(pm_message_t state) { + struct device *dev; - while (!list_empty(&dpm_off_irq)) { - struct list_head *entry = dpm_off_irq.next; - struct device *dev = to_device(entry); + list_for_each_entry(dev, &dpm_list, power.entry) + if (dev->power.status > DPM_OFF) { + int error; - list_move_tail(entry, &dpm_off); - resume_device_early(dev); - } + dev->power.status = DPM_OFF; + error = resume_device_noirq(dev, state); + if (error) + pm_dev_err(dev, state, " early", error); + } } /** * device_power_up - Turn on all devices that need special attention. + * @state: PM transition of the system being carried out. * * Power on system devices, then devices that required we shut them down * with interrupts disabled. * * Must be called with interrupts disabled. */ -void device_power_up(void) +void device_power_up(pm_message_t state) { sysdev_resume(); - dpm_power_up(); + dpm_power_up(state); } EXPORT_SYMBOL_GPL(device_power_up); /** * resume_device - Restore state for one device. * @dev: Device. - * + * @state: PM transition of the system being carried out. */ -static int resume_device(struct device *dev) +static int resume_device(struct device *dev, pm_message_t state) { int error = 0; @@ -175,21 +360,40 @@ static int resume_device(struct device *dev) down(&dev->sem); - if (dev->bus && dev->bus->resume) { - dev_dbg(dev,"resuming\n"); - error = dev->bus->resume(dev); + if (dev->bus) { + if (dev->bus->pm) { + pm_dev_dbg(dev, state, ""); + error = pm_op(dev, &dev->bus->pm->base, state); + } else if (dev->bus->resume) { + pm_dev_dbg(dev, state, "legacy "); + error = dev->bus->resume(dev); + } + if (error) + goto End; } - if (!error && dev->type && dev->type->resume) { - dev_dbg(dev,"resuming\n"); - error = dev->type->resume(dev); + if (dev->type) { + if (dev->type->pm) { + pm_dev_dbg(dev, state, "type "); + error = pm_op(dev, dev->type->pm, state); + } else if (dev->type->resume) { + pm_dev_dbg(dev, state, "legacy type "); + error = dev->type->resume(dev); + } + if (error) + goto End; } - if (!error && dev->class && dev->class->resume) { - dev_dbg(dev,"class resume\n"); - error = dev->class->resume(dev); + if (dev->class) { + if (dev->class->pm) { + pm_dev_dbg(dev, state, "class "); + error = pm_op(dev, dev->class->pm, state); + } else if (dev->class->resume) { + pm_dev_dbg(dev, state, "legacy class "); + error = dev->class->resume(dev); + } } - + End: up(&dev->sem); TRACE_RESUME(error); @@ -198,78 +402,161 @@ static int resume_device(struct device *dev) /** * dpm_resume - Resume every device. + * @state: PM transition of the system being carried out. * - * Resume the devices that have either not gone through - * the late suspend, or that did go through it but also - * went through the early resume. + * Execute the appropriate "resume" callback for all devices the status of + * which indicates that they are inactive. + */ +static void dpm_resume(pm_message_t state) +{ + struct list_head list; + + INIT_LIST_HEAD(&list); + mutex_lock(&dpm_list_mtx); + transition_started = false; + while (!list_empty(&dpm_list)) { + struct device *dev = to_device(dpm_list.next); + + get_device(dev); + if (dev->power.status >= DPM_OFF) { + int error; + + dev->power.status = DPM_RESUMING; + mutex_unlock(&dpm_list_mtx); + + error = resume_device(dev, state); + + mutex_lock(&dpm_list_mtx); + if (error) + pm_dev_err(dev, state, "", error); + } else if (dev->power.status == DPM_SUSPENDING) { + /* Allow new children of the device to be registered */ + dev->power.status = DPM_RESUMING; + } + if (!list_empty(&dev->power.entry)) + list_move_tail(&dev->power.entry, &list); + put_device(dev); + } + list_splice(&list, &dpm_list); + mutex_unlock(&dpm_list_mtx); +} + +/** + * complete_device - Complete a PM transition for given device + * @dev: Device. + * @state: PM transition of the system being carried out. + */ +static void complete_device(struct device *dev, pm_message_t state) +{ + down(&dev->sem); + + if (dev->class && dev->class->pm && dev->class->pm->complete) { + pm_dev_dbg(dev, state, "completing class "); + dev->class->pm->complete(dev); + } + + if (dev->type && dev->type->pm && dev->type->pm->complete) { + pm_dev_dbg(dev, state, "completing type "); + dev->type->pm->complete(dev); + } + + if (dev->bus && dev->bus->pm && dev->bus->pm->base.complete) { + pm_dev_dbg(dev, state, "completing "); + dev->bus->pm->base.complete(dev); + } + + up(&dev->sem); +} + +/** + * dpm_complete - Complete a PM transition for all devices. + * @state: PM transition of the system being carried out. * - * Take devices from the dpm_off_list, resume them, - * and put them on the dpm_locked list. + * Execute the ->complete() callbacks for all devices that are not marked + * as DPM_ON. */ -static void dpm_resume(void) +static void dpm_complete(pm_message_t state) { + struct list_head list; + + INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); - all_sleeping = false; - while(!list_empty(&dpm_off)) { - struct list_head *entry = dpm_off.next; - struct device *dev = to_device(entry); + while (!list_empty(&dpm_list)) { + struct device *dev = to_device(dpm_list.prev); - list_move_tail(entry, &dpm_active); - dev->power.sleeping = false; - mutex_unlock(&dpm_list_mtx); - resume_device(dev); - mutex_lock(&dpm_list_mtx); + get_device(dev); + if (dev->power.status > DPM_ON) { + dev->power.status = DPM_ON; + mutex_unlock(&dpm_list_mtx); + + complete_device(dev, state); + + mutex_lock(&dpm_list_mtx); + } + if (!list_empty(&dev->power.entry)) + list_move(&dev->power.entry, &list); + put_device(dev); } + list_splice(&list, &dpm_list); mutex_unlock(&dpm_list_mtx); } /** * device_resume - Restore state of each device in system. + * @state: PM transition of the system being carried out. * * Resume all the devices, unlock them all, and allow new * devices to be registered once again. */ -void device_resume(void) +void device_resume(pm_message_t state) { might_sleep(); - dpm_resume(); + dpm_resume(state); + dpm_complete(state); } EXPORT_SYMBOL_GPL(device_resume); /*------------------------- Suspend routines -------------------------*/ -static inline char *suspend_verb(u32 event) +/** + * resume_event - return a PM message representing the resume event + * corresponding to given sleep state. + * @sleep_state: PM message representing a sleep state. + */ +static pm_message_t resume_event(pm_message_t sleep_state) { - switch (event) { - case PM_EVENT_SUSPEND: return "suspend"; - case PM_EVENT_FREEZE: return "freeze"; - case PM_EVENT_PRETHAW: return "prethaw"; - default: return "(unknown suspend event)"; + switch (sleep_state.event) { + case PM_EVENT_SUSPEND: + return PMSG_RESUME; + case PM_EVENT_FREEZE: + case PM_EVENT_QUIESCE: + return PMSG_RECOVER; + case PM_EVENT_HIBERNATE: + return PMSG_RESTORE; } -} - -static void -suspend_device_dbg(struct device *dev, pm_message_t state, char *info) -{ - dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event), - ((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ? - ", may wakeup" : ""); + return PMSG_ON; } /** - * suspend_device_late - Shut down one device (late suspend). + * suspend_device_noirq - Shut down one device (late suspend). * @dev: Device. - * @state: Power state device is entering. + * @state: PM transition of the system being carried out. * * This is called with interrupts off and only a single CPU running. */ -static int suspend_device_late(struct device *dev, pm_message_t state) +static int suspend_device_noirq(struct device *dev, pm_message_t state) { int error = 0; - if (dev->bus && dev->bus->suspend_late) { - suspend_device_dbg(dev, state, "LATE "); + if (!dev->bus) + return 0; + + if (dev->bus->pm) { + pm_dev_dbg(dev, state, "LATE "); + error = pm_noirq_op(dev, dev->bus->pm, state); + } else if (dev->bus->suspend_late) { + pm_dev_dbg(dev, state, "legacy LATE "); error = dev->bus->suspend_late(dev, state); suspend_report_result(dev->bus->suspend_late, error); } @@ -278,37 +565,30 @@ static int suspend_device_late(struct device *dev, pm_message_t state) /** * device_power_down - Shut down special devices. - * @state: Power state to enter. + * @state: PM transition of the system being carried out. * - * Power down devices that require interrupts to be disabled - * and move them from the dpm_off list to the dpm_off_irq list. + * Power down devices that require interrupts to be disabled. * Then power down system devices. * * Must be called with interrupts disabled and only one CPU running. */ int device_power_down(pm_message_t state) { + struct device *dev; int error = 0; - while (!list_empty(&dpm_off)) { - struct list_head *entry = dpm_off.prev; - struct device *dev = to_device(entry); - - error = suspend_device_late(dev, state); + list_for_each_entry_reverse(dev, &dpm_list, power.entry) { + error = suspend_device_noirq(dev, state); if (error) { - printk(KERN_ERR "Could not power down device %s: " - "error %d\n", - kobject_name(&dev->kobj), error); + pm_dev_err(dev, state, " late", error); break; } - if (!list_empty(&dev->power.entry)) - list_move(&dev->power.entry, &dpm_off_irq); + dev->power.status = DPM_OFF_IRQ; } - if (!error) error = sysdev_suspend(state); if (error) - dpm_power_up(); + dpm_power_up(resume_event(state)); return error; } EXPORT_SYMBOL_GPL(device_power_down); @@ -316,7 +596,7 @@ EXPORT_SYMBOL_GPL(device_power_down); /** * suspend_device - Save state of one device. * @dev: Device. - * @state: Power state device is entering. + * @state: PM transition of the system being carried out. */ static int suspend_device(struct device *dev, pm_message_t state) { @@ -324,24 +604,43 @@ static int suspend_device(struct device *dev, pm_message_t state) down(&dev->sem); - if (dev->class && dev->class->suspend) { - suspend_device_dbg(dev, state, "class "); - error = dev->class->suspend(dev, state); - suspend_report_result(dev->class->suspend, error); + if (dev->class) { + if (dev->class->pm) { + pm_dev_dbg(dev, state, "class "); + error = pm_op(dev, dev->class->pm, state); + } else if (dev->class->suspend) { + pm_dev_dbg(dev, state, "legacy class "); + error = dev->class->suspend(dev, state); + suspend_report_result(dev->class->suspend, error); + } + if (error) + goto End; } - if (!error && dev->type && dev->type->suspend) { - suspend_device_dbg(dev, state, "type "); - error = dev->type->suspend(dev, state); - suspend_report_result(dev->type->suspend, error); + if (dev->type) { + if (dev->type->pm) { + pm_dev_dbg(dev, state, "type "); + error = pm_op(dev, dev->type->pm, state); + } else if (dev->type->suspend) { + pm_dev_dbg(dev, state, "legacy type "); + error = dev->type->suspend(dev, state); + suspend_report_result(dev->type->suspend, error); + } + if (error) + goto End; } - if (!error && dev->bus && dev->bus->suspend) { - suspend_device_dbg(dev, state, ""); - error = dev->bus->suspend(dev, state); - suspend_report_result(dev->bus->suspend, error); + if (dev->bus) { + if (dev->bus->pm) { + pm_dev_dbg(dev, state, ""); + error = pm_op(dev, &dev->bus->pm->base, state); + } else if (dev->bus->suspend) { + pm_dev_dbg(dev, state, "legacy "); + error = dev->bus->suspend(dev, state); + suspend_report_result(dev->bus->suspend, error); + } } - + End: up(&dev->sem); return error; @@ -349,67 +648,139 @@ static int suspend_device(struct device *dev, pm_message_t state) /** * dpm_suspend - Suspend every device. - * @state: Power state to put each device in. - * - * Walk the dpm_locked list. Suspend each device and move it - * to the dpm_off list. + * @state: PM transition of the system being carried out. * - * (For historical reasons, if it returns -EAGAIN, that used to mean - * that the device would be called again with interrupts disabled. - * These days, we use the "suspend_late()" callback for that, so we - * print a warning and consider it an error). + * Execute the appropriate "suspend" callbacks for all devices. */ static int dpm_suspend(pm_message_t state) { + struct list_head list; int error = 0; + INIT_LIST_HEAD(&list); mutex_lock(&dpm_list_mtx); - while (!list_empty(&dpm_active)) { - struct list_head *entry = dpm_active.prev; - struct device *dev = to_device(entry); + while (!list_empty(&dpm_list)) { + struct device *dev = to_device(dpm_list.prev); - WARN_ON(dev->parent && dev->parent->power.sleeping); - - dev->power.sleeping = true; + get_device(dev); mutex_unlock(&dpm_list_mtx); + error = suspend_device(dev, state); + mutex_lock(&dpm_list_mtx); if (error) { - printk(KERN_ERR "Could not suspend device %s: " - "error %d%s\n", - kobject_name(&dev->kobj), - error, - (error == -EAGAIN ? - " (please convert to suspend_late)" : - "")); - dev->power.sleeping = false; + pm_dev_err(dev, state, "", error); + put_device(dev); break; } + dev->power.status = DPM_OFF; if (!list_empty(&dev->power.entry)) - list_move(&dev->power.entry, &dpm_off); + list_move(&dev->power.entry, &list); + put_device(dev); } - if (!error) - all_sleeping = true; + list_splice(&list, dpm_list.prev); mutex_unlock(&dpm_list_mtx); + return error; +} + +/** + * prepare_device - Execute the ->prepare() callback(s) for given device. + * @dev: Device. + * @state: PM transition of the system being carried out. + */ +static int prepare_device(struct device *dev, pm_message_t state) +{ + int error = 0; + + down(&dev->sem); + + if (dev->bus && dev->bus->pm && dev->bus->pm->base.prepare) { + pm_dev_dbg(dev, state, "preparing "); + error = dev->bus->pm->base.prepare(dev); + suspend_report_result(dev->bus->pm->base.prepare, error); + if (error) + goto End; + } + + if (dev->type && dev->type->pm && dev->type->pm->prepare) { + pm_dev_dbg(dev, state, "preparing type "); + error = dev->type->pm->prepare(dev); + suspend_report_result(dev->type->pm->prepare, error); + if (error) + goto End; + } + + if (dev->class && dev->class->pm && dev->class->pm->prepare) { + pm_dev_dbg(dev, state, "preparing class "); + error = dev->class->pm->prepare(dev); + suspend_report_result(dev->class->pm->prepare, error); + } + End: + up(&dev->sem); + + return error; +} + +/** + * dpm_prepare - Prepare all devices for a PM transition. + * @state: PM transition of the system being carried out. + * + * Execute the ->prepare() callback for all devices. + */ +static int dpm_prepare(pm_message_t state) +{ + struct list_head list; + int error = 0; + + INIT_LIST_HEAD(&list); + mutex_lock(&dpm_list_mtx); + transition_started = true; + while (!list_empty(&dpm_list)) { + struct device *dev = to_device(dpm_list.next); + + get_device(dev); + dev->power.status = DPM_PREPARING; + mutex_unlock(&dpm_list_mtx); + error = prepare_device(dev, state); + + mutex_lock(&dpm_list_mtx); + if (error) { + dev->power.status = DPM_ON; + if (error == -EAGAIN) { + put_device(dev); + continue; + } + printk(KERN_ERR "PM: Failed to prepare device %s " + "for power transition: error %d\n", + kobject_name(&dev->kobj), error); + put_device(dev); + break; + } + dev->power.status = DPM_SUSPENDING; + if (!list_empty(&dev->power.entry)) + list_move_tail(&dev->power.entry, &list); + put_device(dev); + } + list_splice(&list, &dpm_list); + mutex_unlock(&dpm_list_mtx); return error; } /** * device_suspend - Save state and stop all devices in system. - * @state: new power management state + * @state: PM transition of the system being carried out. * - * Prevent new devices from being registered, then lock all devices - * and suspend them. + * Prepare and suspend all devices. */ int device_suspend(pm_message_t state) { int error; might_sleep(); - error = dpm_suspend(state); - if (error) - device_resume(); + error = dpm_prepare(state); + if (!error) + error = dpm_suspend(state); return error; } EXPORT_SYMBOL_GPL(device_suspend); diff --git a/drivers/base/power/power.h b/drivers/base/power/power.h index a6894f2a4b9..a3252c0e288 100644 --- a/drivers/base/power/power.h +++ b/drivers/base/power/power.h @@ -4,7 +4,7 @@ * main.c */ -extern struct list_head dpm_active; /* The active device list */ +extern struct list_head dpm_list; /* The active device list */ static inline struct device *to_device(struct list_head *entry) { diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c index d11f74b038d..596aeecfdff 100644 --- a/drivers/base/power/sysfs.c +++ b/drivers/base/power/sysfs.c @@ -6,9 +6,6 @@ #include <linux/string.h> #include "power.h" -int (*platform_enable_wakeup)(struct device *dev, int is_on); - - /* * wakeup - Report/change current wakeup option for device * diff --git a/drivers/base/power/trace.c b/drivers/base/power/trace.c index 87a7f1d0257..9b1b20b59e0 100644 --- a/drivers/base/power/trace.c +++ b/drivers/base/power/trace.c @@ -188,9 +188,9 @@ static int show_file_hash(unsigned int value) static int show_dev_hash(unsigned int value) { int match = 0; - struct list_head * entry = dpm_active.prev; + struct list_head *entry = dpm_list.prev; - while (entry != &dpm_active) { + while (entry != &dpm_list) { struct device * dev = to_device(entry); unsigned int hash = hash_string(DEVSEED, dev->bus_id, DEVHASH); if (hash == value) { diff --git a/drivers/base/topology.c b/drivers/base/topology.c index 1efe162e16d..3f6d9b0a6ab 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -93,47 +93,27 @@ static ssize_t show_##name##_list(struct sys_device *dev, char *buf) \ #define define_siblings_show_func(name) \ define_siblings_show_map(name); define_siblings_show_list(name) -#ifdef topology_physical_package_id define_id_show_func(physical_package_id); define_one_ro(physical_package_id); -#define ref_physical_package_id_attr &attr_physical_package_id.attr, -#else -#define ref_physical_package_id_attr -#endif -#ifdef topology_core_id define_id_show_func(core_id); define_one_ro(core_id); -#define ref_core_id_attr &attr_core_id.attr, -#else -#define ref_core_id_attr -#endif -#ifdef topology_thread_siblings define_siblings_show_func(thread_siblings); define_one_ro(thread_siblings); define_one_ro(thread_siblings_list); -#define ref_thread_siblings_attr \ - &attr_thread_siblings.attr, &attr_thread_siblings_list.attr, -#else -#define ref_thread_siblings_attr -#endif -#ifdef topology_core_siblings define_siblings_show_func(core_siblings); define_one_ro(core_siblings); define_one_ro(core_siblings_list); -#define ref_core_siblings_attr \ - &attr_core_siblings.attr, &attr_core_siblings_list.attr, -#else -#define ref_core_siblings_attr -#endif static struct attribute *default_attrs[] = { - ref_physical_package_id_attr - ref_core_id_attr - ref_thread_siblings_attr - ref_core_siblings_attr + &attr_physical_package_id.attr, + &attr_core_id.attr, + &attr_thread_siblings.attr, + &attr_thread_siblings_list.attr, + &attr_core_siblings.attr, + &attr_core_siblings_list.attr, NULL }; |