diff options
Diffstat (limited to 'drivers/block/cciss.c')
| -rw-r--r-- | drivers/block/cciss.c | 846 |
1 files changed, 590 insertions, 256 deletions
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index d8372b43282..92b126394fa 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -36,9 +36,11 @@ #include <linux/proc_fs.h> #include <linux/seq_file.h> #include <linux/init.h> +#include <linux/jiffies.h> #include <linux/hdreg.h> #include <linux/spinlock.h> #include <linux/compat.h> +#include <linux/mutex.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -66,6 +68,12 @@ MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" MODULE_VERSION("3.6.20"); MODULE_LICENSE("GPL"); +static int cciss_allow_hpsa; +module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(cciss_allow_hpsa, + "Prevent cciss driver from accessing hardware known to be " + " supported by the hpsa driver"); + #include "cciss_cmd.h" #include "cciss.h" #include <linux/cciss_ioctl.h> @@ -99,8 +107,6 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B}, - {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, - PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} }; @@ -121,8 +127,6 @@ static struct board_type products[] = { {0x409D0E11, "Smart Array 6400 EM", &SA5_access}, {0x40910E11, "Smart Array 6i", &SA5_access}, {0x3225103C, "Smart Array P600", &SA5_access}, - {0x3223103C, "Smart Array P800", &SA5_access}, - {0x3234103C, "Smart Array P400", &SA5_access}, {0x3235103C, "Smart Array P400i", &SA5_access}, {0x3211103C, "Smart Array E200i", &SA5_access}, {0x3212103C, "Smart Array E200", &SA5_access}, @@ -130,6 +134,10 @@ static struct board_type products[] = { {0x3214103C, "Smart Array E200i", &SA5_access}, {0x3215103C, "Smart Array E200i", &SA5_access}, {0x3237103C, "Smart Array E500", &SA5_access}, +/* controllers below this line are also supported by the hpsa driver. */ +#define HPSA_BOUNDARY 0x3223103C + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, {0x323D103C, "Smart Array P700m", &SA5_access}, {0x3241103C, "Smart Array P212", &SA5_access}, {0x3243103C, "Smart Array P410", &SA5_access}, @@ -138,7 +146,6 @@ static struct board_type products[] = { {0x3249103C, "Smart Array P812", &SA5_access}, {0x324A103C, "Smart Array P712m", &SA5_access}, {0x324B103C, "Smart Array P711m", &SA5_access}, - {0xFFFF103C, "Unknown Smart Array", &SA5_access}, }; /* How long to wait (in milliseconds) for board to go into simple mode */ @@ -155,6 +162,10 @@ static struct board_type products[] = { static ctlr_info_t *hba[MAX_CTLR]; +static struct task_struct *cciss_scan_thread; +static DEFINE_MUTEX(scan_mutex); +static LIST_HEAD(scan_q); + static void do_cciss_request(struct request_queue *q); static irqreturn_t do_cciss_intr(int irq, void *dev_id); static int cciss_open(struct block_device *bdev, fmode_t mode); @@ -164,9 +175,9 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode, static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo); static int cciss_revalidate(struct gendisk *disk); -static int rebuild_lun_table(ctlr_info_t *h, int first_time); +static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl); static int deregister_disk(ctlr_info_t *h, int drv_index, - int clear_all); + int clear_all, int via_ioctl); static void cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size, unsigned int *block_size); @@ -189,8 +200,13 @@ static int sendcmd_withirq_core(ctlr_info_t *h, CommandList_struct *c, static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c); static void fail_all_cmds(unsigned long ctlr); +static int add_to_scan_list(struct ctlr_info *h); static int scan_thread(void *data); static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c); +static void cciss_hba_release(struct device *dev); +static void cciss_device_release(struct device *dev); +static void cciss_free_gendisk(ctlr_info_t *h, int drv_index); +static void cciss_free_drive_info(ctlr_info_t *h, int drv_index); #ifdef CONFIG_PROC_FS static void cciss_procinit(int i); @@ -205,7 +221,7 @@ static int cciss_compat_ioctl(struct block_device *, fmode_t, unsigned, unsigned long); #endif -static struct block_device_operations cciss_fops = { +static const struct block_device_operations cciss_fops = { .owner = THIS_MODULE, .open = cciss_open, .release = cciss_release, @@ -245,7 +261,10 @@ static inline void removeQ(CommandList_struct *c) #include "cciss_scsi.c" /* For SCSI tape support */ -#define RAID_UNKNOWN 6 +static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", + "UNKNOWN" +}; +#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1) #ifdef CONFIG_PROC_FS @@ -255,9 +274,6 @@ static inline void removeQ(CommandList_struct *c) #define ENG_GIG 1000000000 #define ENG_GIG_FACTOR (ENG_GIG/512) #define ENGAGE_SCSI "engage scsi" -static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG", - "UNKNOWN" -}; static struct proc_dir_entry *proc_cciss; @@ -318,7 +334,7 @@ static int cciss_seq_show(struct seq_file *seq, void *v) ctlr_info_t *h = seq->private; unsigned ctlr = h->ctlr; loff_t *pos = v; - drive_info_struct *drv = &h->drv[*pos]; + drive_info_struct *drv = h->drv[*pos]; if (*pos > h->highest_lun) return 0; @@ -331,7 +347,7 @@ static int cciss_seq_show(struct seq_file *seq, void *v) vol_sz_frac *= 100; sector_div(vol_sz_frac, ENG_GIG_FACTOR); - if (drv->raid_level > 5) + if (drv->raid_level < 0 || drv->raid_level > RAID_UNKNOWN) drv->raid_level = RAID_UNKNOWN; seq_printf(seq, "cciss/c%dd%d:" "\t%4u.%02uGB\tRAID %s\n", @@ -363,7 +379,7 @@ static void cciss_seq_stop(struct seq_file *seq, void *v) h->busy_configuring = 0; } -static struct seq_operations cciss_seq_ops = { +static const struct seq_operations cciss_seq_ops = { .start = cciss_seq_start, .show = cciss_seq_show, .next = cciss_seq_next, @@ -426,7 +442,7 @@ out: return err; } -static struct file_operations cciss_proc_fops = { +static const struct file_operations cciss_proc_fops = { .owner = THIS_MODULE, .open = cciss_seq_open, .read = seq_read, @@ -454,9 +470,19 @@ static void __devinit cciss_procinit(int i) #define to_hba(n) container_of(n, struct ctlr_info, dev) #define to_drv(n) container_of(n, drive_info_struct, dev) -static struct device_type cciss_host_type = { - .name = "cciss_host", -}; +static ssize_t host_store_rescan(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ctlr_info *h = to_hba(dev); + + add_to_scan_list(h); + wake_up_process(cciss_scan_thread); + wait_for_completion_interruptible(&h->scan_wait); + + return count; +} +static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan); static ssize_t dev_show_unique_id(struct device *dev, struct device_attribute *attr, @@ -486,7 +512,7 @@ static ssize_t dev_show_unique_id(struct device *dev, sn[8], sn[9], sn[10], sn[11], sn[12], sn[13], sn[14], sn[15]); } -DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); +static DEVICE_ATTR(unique_id, S_IRUGO, dev_show_unique_id, NULL); static ssize_t dev_show_vendor(struct device *dev, struct device_attribute *attr, @@ -510,7 +536,7 @@ static ssize_t dev_show_vendor(struct device *dev, else return snprintf(buf, sizeof(vendor) + 1, "%s\n", drv->vendor); } -DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); +static DEVICE_ATTR(vendor, S_IRUGO, dev_show_vendor, NULL); static ssize_t dev_show_model(struct device *dev, struct device_attribute *attr, @@ -534,7 +560,7 @@ static ssize_t dev_show_model(struct device *dev, else return snprintf(buf, sizeof(model) + 1, "%s\n", drv->model); } -DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); +static DEVICE_ATTR(model, S_IRUGO, dev_show_model, NULL); static ssize_t dev_show_rev(struct device *dev, struct device_attribute *attr, @@ -558,13 +584,103 @@ static ssize_t dev_show_rev(struct device *dev, else return snprintf(buf, sizeof(rev) + 1, "%s\n", drv->rev); } -DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); +static DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL); + +static ssize_t cciss_show_lunid(struct device *dev, + struct device_attribute *attr, char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + unsigned long flags; + unsigned char lunid[8]; + + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + if (h->busy_configuring) { + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return -EBUSY; + } + if (!drv->heads) { + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return -ENOTTY; + } + memcpy(lunid, drv->LunID, sizeof(lunid)); + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n", + lunid[0], lunid[1], lunid[2], lunid[3], + lunid[4], lunid[5], lunid[6], lunid[7]); +} +static DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL); + +static ssize_t cciss_show_raid_level(struct device *dev, + struct device_attribute *attr, char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + int raid; + unsigned long flags; + + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + if (h->busy_configuring) { + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return -EBUSY; + } + raid = drv->raid_level; + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + if (raid < 0 || raid > RAID_UNKNOWN) + raid = RAID_UNKNOWN; + + return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n", + raid_label[raid]); +} +static DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL); + +static ssize_t cciss_show_usage_count(struct device *dev, + struct device_attribute *attr, char *buf) +{ + drive_info_struct *drv = to_drv(dev); + struct ctlr_info *h = to_hba(drv->dev.parent); + unsigned long flags; + int count; + + spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); + if (h->busy_configuring) { + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return -EBUSY; + } + count = drv->usage_count; + spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); + return snprintf(buf, 20, "%d\n", count); +} +static DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL); + +static struct attribute *cciss_host_attrs[] = { + &dev_attr_rescan.attr, + NULL +}; + +static struct attribute_group cciss_host_attr_group = { + .attrs = cciss_host_attrs, +}; + +static const struct attribute_group *cciss_host_attr_groups[] = { + &cciss_host_attr_group, + NULL +}; + +static struct device_type cciss_host_type = { + .name = "cciss_host", + .groups = cciss_host_attr_groups, + .release = cciss_hba_release, +}; static struct attribute *cciss_dev_attrs[] = { &dev_attr_unique_id.attr, &dev_attr_model.attr, &dev_attr_vendor.attr, &dev_attr_rev.attr, + &dev_attr_lunid.attr, + &dev_attr_raid_level.attr, + &dev_attr_usage_count.attr, NULL }; @@ -580,12 +696,24 @@ static const struct attribute_group *cciss_dev_attr_groups[] = { static struct device_type cciss_dev_type = { .name = "cciss_device", .groups = cciss_dev_attr_groups, + .release = cciss_device_release, }; static struct bus_type cciss_bus_type = { .name = "cciss", }; +/* + * cciss_hba_release is called when the reference count + * of h->dev goes to zero. + */ +static void cciss_hba_release(struct device *dev) +{ + /* + * nothing to do, but need this to avoid a warning + * about not having a release handler from lib/kref.c. + */ +} /* * Initialize sysfs entry for each controller. This sets up and registers @@ -609,6 +737,16 @@ static int cciss_create_hba_sysfs_entry(struct ctlr_info *h) static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h) { device_del(&h->dev); + put_device(&h->dev); /* final put. */ +} + +/* cciss_device_release is called when the reference count + * of h->drv[x]dev goes to zero. + */ +static void cciss_device_release(struct device *dev) +{ + drive_info_struct *drv = to_drv(dev); + kfree(drv); } /* @@ -617,24 +755,39 @@ static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h) * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from * /sys/block/cciss!c#d# to this entry. */ -static int cciss_create_ld_sysfs_entry(struct ctlr_info *h, - drive_info_struct *drv, +static long cciss_create_ld_sysfs_entry(struct ctlr_info *h, int drv_index) { - device_initialize(&drv->dev); - drv->dev.type = &cciss_dev_type; - drv->dev.bus = &cciss_bus_type; - dev_set_name(&drv->dev, "c%dd%d", h->ctlr, drv_index); - drv->dev.parent = &h->dev; - return device_add(&drv->dev); + struct device *dev; + + if (h->drv[drv_index]->device_initialized) + return 0; + + dev = &h->drv[drv_index]->dev; + device_initialize(dev); + dev->type = &cciss_dev_type; + dev->bus = &cciss_bus_type; + dev_set_name(dev, "c%dd%d", h->ctlr, drv_index); + dev->parent = &h->dev; + h->drv[drv_index]->device_initialized = 1; + return device_add(dev); } /* * Remove sysfs entries for a logical drive. */ -static void cciss_destroy_ld_sysfs_entry(drive_info_struct *drv) +static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index, + int ctlr_exiting) { - device_del(&drv->dev); + struct device *dev = &h->drv[drv_index]->dev; + + /* special case for c*d0, we only destroy it on controller exit */ + if (drv_index == 0 && !ctlr_exiting) + return; + + device_del(dev); + put_device(dev); /* the "final" put. */ + h->drv[drv_index] = NULL; } /* @@ -751,7 +904,7 @@ static int cciss_open(struct block_device *bdev, fmode_t mode) printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name); #endif /* CCISS_DEBUG */ - if (host->busy_initializing || drv->busy_configuring) + if (drv->busy_configuring) return -EBUSY; /* * Root is allowed to open raw volume zero even if it's not configured @@ -767,7 +920,8 @@ static int cciss_open(struct block_device *bdev, fmode_t mode) if (MINOR(bdev->bd_dev) & 0x0f) { return -ENXIO; /* if it is, make sure we have a LUN ID */ - } else if (drv->LunID == 0) { + } else if (memcmp(drv->LunID, CTLR_LUNID, + sizeof(drv->LunID))) { return -ENXIO; } } @@ -1132,12 +1286,13 @@ static int cciss_ioctl(struct block_device *bdev, fmode_t mode, case CCISS_DEREGDISK: case CCISS_REGNEWD: case CCISS_REVALIDVOLS: - return rebuild_lun_table(host, 0); + return rebuild_lun_table(host, 0, 1); case CCISS_GETLUNINFO:{ LogvolInfo_struct luninfo; - luninfo.LunID = drv->LunID; + memcpy(&luninfo.LunID, drv->LunID, + sizeof(luninfo.LunID)); luninfo.num_opens = drv->usage_count; luninfo.num_parts = 0; if (copy_to_user(argp, &luninfo, @@ -1475,7 +1630,10 @@ static void cciss_check_queues(ctlr_info_t *h) /* make sure the disk has been added and the drive is real * because this can be called from the middle of init_one. */ - if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads)) + if (!h->drv[curr_queue]) + continue; + if (!(h->drv[curr_queue]->queue) || + !(h->drv[curr_queue]->heads)) continue; blk_start_queue(h->gendisk[curr_queue]->queue); @@ -1532,13 +1690,11 @@ static void cciss_softirq_done(struct request *rq) spin_unlock_irqrestore(&h->lock, flags); } -static void log_unit_to_scsi3addr(ctlr_info_t *h, unsigned char scsi3addr[], - uint32_t log_unit) +static inline void log_unit_to_scsi3addr(ctlr_info_t *h, + unsigned char scsi3addr[], uint32_t log_unit) { - log_unit = h->drv[log_unit].LunID & 0x03fff; - memset(&scsi3addr[4], 0, 4); - memcpy(&scsi3addr[0], &log_unit, 4); - scsi3addr[3] |= 0x40; + memcpy(scsi3addr, h->drv[log_unit]->LunID, + sizeof(h->drv[log_unit]->LunID)); } /* This function gets the SCSI vendor, model, and revision of a logical drive @@ -1615,16 +1771,23 @@ static void cciss_get_serial_no(int ctlr, int logvol, int withirq, return; } -static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, +/* + * cciss_add_disk sets up the block device queue for a logical drive + */ +static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, int drv_index) { disk->queue = blk_init_queue(do_cciss_request, &h->lock); + if (!disk->queue) + goto init_queue_failure; sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index); disk->major = h->major; disk->first_minor = drv_index << NWD_SHIFT; disk->fops = &cciss_fops; - disk->private_data = &h->drv[drv_index]; - disk->driverfs_dev = &h->drv[drv_index].dev; + if (cciss_create_ld_sysfs_entry(h, drv_index)) + goto cleanup_queue; + disk->private_data = h->drv[drv_index]; + disk->driverfs_dev = &h->drv[drv_index]->dev; /* Set up queue information */ blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask); @@ -1642,14 +1805,21 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, disk->queue->queuedata = h; blk_queue_logical_block_size(disk->queue, - h->drv[drv_index].block_size); + h->drv[drv_index]->block_size); /* Make sure all queue data is written out before */ - /* setting h->drv[drv_index].queue, as setting this */ + /* setting h->drv[drv_index]->queue, as setting this */ /* allows the interrupt handler to start the queue */ wmb(); - h->drv[drv_index].queue = disk->queue; + h->drv[drv_index]->queue = disk->queue; add_disk(disk); + return 0; + +cleanup_queue: + blk_cleanup_queue(disk->queue); + disk->queue = NULL; +init_queue_failure: + return -1; } /* This function will check the usage_count of the drive to be updated/added. @@ -1662,7 +1832,8 @@ static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk, * is also the controller node. Any changes to disk 0 will show up on * the next reboot. */ -static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) +static void cciss_update_drive_info(int ctlr, int drv_index, int first_time, + int via_ioctl) { ctlr_info_t *h = hba[ctlr]; struct gendisk *disk; @@ -1672,21 +1843,13 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) unsigned long flags = 0; int ret = 0; drive_info_struct *drvinfo; - int was_only_controller_node; /* Get information about the disk and modify the driver structure */ inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL); - drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL); + drvinfo = kzalloc(sizeof(*drvinfo), GFP_KERNEL); if (inq_buff == NULL || drvinfo == NULL) goto mem_msg; - /* See if we're trying to update the "controller node" - * this will happen the when the first logical drive gets - * created by ACU. - */ - was_only_controller_node = (drv_index == 0 && - h->drv[0].raid_level == -1); - /* testing to see if 16-byte CDBs are already being used */ if (h->cciss_read == CCISS_READ_16) { cciss_read_capacity_16(h->ctlr, drv_index, 1, @@ -1719,16 +1882,19 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) drvinfo->model, drvinfo->rev); cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no, sizeof(drvinfo->serial_no)); + /* Save the lunid in case we deregister the disk, below. */ + memcpy(drvinfo->LunID, h->drv[drv_index]->LunID, + sizeof(drvinfo->LunID)); /* Is it the same disk we already know, and nothing's changed? */ - if (h->drv[drv_index].raid_level != -1 && + if (h->drv[drv_index]->raid_level != -1 && ((memcmp(drvinfo->serial_no, - h->drv[drv_index].serial_no, 16) == 0) && - drvinfo->block_size == h->drv[drv_index].block_size && - drvinfo->nr_blocks == h->drv[drv_index].nr_blocks && - drvinfo->heads == h->drv[drv_index].heads && - drvinfo->sectors == h->drv[drv_index].sectors && - drvinfo->cylinders == h->drv[drv_index].cylinders)) + h->drv[drv_index]->serial_no, 16) == 0) && + drvinfo->block_size == h->drv[drv_index]->block_size && + drvinfo->nr_blocks == h->drv[drv_index]->nr_blocks && + drvinfo->heads == h->drv[drv_index]->heads && + drvinfo->sectors == h->drv[drv_index]->sectors && + drvinfo->cylinders == h->drv[drv_index]->cylinders)) /* The disk is unchanged, nothing to update */ goto freeret; @@ -1738,18 +1904,17 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) * If the disk already exists then deregister it before proceeding * (unless it's the first disk (for the controller node). */ - if (h->drv[drv_index].raid_level != -1 && drv_index != 0) { + if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) { printk(KERN_WARNING "disk %d has changed.\n", drv_index); spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); - h->drv[drv_index].busy_configuring = 1; + h->drv[drv_index]->busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - /* deregister_disk sets h->drv[drv_index].queue = NULL + /* deregister_disk sets h->drv[drv_index]->queue = NULL * which keeps the interrupt handler from starting * the queue. */ - ret = deregister_disk(h, drv_index, 0); - h->drv[drv_index].busy_configuring = 0; + ret = deregister_disk(h, drv_index, 0, via_ioctl); } /* If the disk is in use return */ @@ -1757,22 +1922,31 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) goto freeret; /* Save the new information from cciss_geometry_inquiry - * and serial number inquiry. + * and serial number inquiry. If the disk was deregistered + * above, then h->drv[drv_index] will be NULL. */ - h->drv[drv_index].block_size = drvinfo->block_size; - h->drv[drv_index].nr_blocks = drvinfo->nr_blocks; - h->drv[drv_index].heads = drvinfo->heads; - h->drv[drv_index].sectors = drvinfo->sectors; - h->drv[drv_index].cylinders = drvinfo->cylinders; - h->drv[drv_index].raid_level = drvinfo->raid_level; - memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16); - memcpy(h->drv[drv_index].vendor, drvinfo->vendor, VENDOR_LEN + 1); - memcpy(h->drv[drv_index].model, drvinfo->model, MODEL_LEN + 1); - memcpy(h->drv[drv_index].rev, drvinfo->rev, REV_LEN + 1); + if (h->drv[drv_index] == NULL) { + drvinfo->device_initialized = 0; + h->drv[drv_index] = drvinfo; + drvinfo = NULL; /* so it won't be freed below. */ + } else { + /* special case for cxd0 */ + h->drv[drv_index]->block_size = drvinfo->block_size; + h->drv[drv_index]->nr_blocks = drvinfo->nr_blocks; + h->drv[drv_index]->heads = drvinfo->heads; + h->drv[drv_index]->sectors = drvinfo->sectors; + h->drv[drv_index]->cylinders = drvinfo->cylinders; + h->drv[drv_index]->raid_level = drvinfo->raid_level; + memcpy(h->drv[drv_index]->serial_no, drvinfo->serial_no, 16); + memcpy(h->drv[drv_index]->vendor, drvinfo->vendor, + VENDOR_LEN + 1); + memcpy(h->drv[drv_index]->model, drvinfo->model, MODEL_LEN + 1); + memcpy(h->drv[drv_index]->rev, drvinfo->rev, REV_LEN + 1); + } ++h->num_luns; disk = h->gendisk[drv_index]; - set_capacity(disk, h->drv[drv_index].nr_blocks); + set_capacity(disk, h->drv[drv_index]->nr_blocks); /* If it's not disk 0 (drv_index != 0) * or if it was disk 0, but there was previously @@ -1780,8 +1954,15 @@ static void cciss_update_drive_info(int ctlr, int drv_index, int first_time) * (raid_leve == -1) then we want to update the * logical drive's information. */ - if (drv_index || first_time) - cciss_add_disk(h, disk, drv_index); + if (drv_index || first_time) { + if (cciss_add_disk(h, disk, drv_index) != 0) { + cciss_free_gendisk(h, drv_index); + cciss_free_drive_info(h, drv_index); + printk(KERN_WARNING "cciss:%d could not update " + "disk %d\n", h->ctlr, drv_index); + --h->num_luns; + } + } freeret: kfree(inq_buff); @@ -1793,28 +1974,70 @@ mem_msg: } /* This function will find the first index of the controllers drive array - * that has a -1 for the raid_level and will return that index. This is - * where new drives will be added. If the index to be returned is greater - * than the highest_lun index for the controller then highest_lun is set - * to this new index. If there are no available indexes then -1 is returned. - * "controller_node" is used to know if this is a real logical drive, or just - * the controller node, which determines if this counts towards highest_lun. + * that has a null drv pointer and allocate the drive info struct and + * will return that index This is where new drives will be added. + * If the index to be returned is greater than the highest_lun index for + * the controller then highest_lun is set * to this new index. + * If there are no available indexes or if tha allocation fails, then -1 + * is returned. * "controller_node" is used to know if this is a real + * logical drive, or just the controller node, which determines if this + * counts towards highest_lun. */ -static int cciss_find_free_drive_index(int ctlr, int controller_node) +static int cciss_alloc_drive_info(ctlr_info_t *h, int controller_node) { int i; + drive_info_struct *drv; + /* Search for an empty slot for our drive info */ for (i = 0; i < CISS_MAX_LUN; i++) { - if (hba[ctlr]->drv[i].raid_level == -1) { - if (i > hba[ctlr]->highest_lun) - if (!controller_node) - hba[ctlr]->highest_lun = i; + + /* if not cxd0 case, and it's occupied, skip it. */ + if (h->drv[i] && i != 0) + continue; + /* + * If it's cxd0 case, and drv is alloc'ed already, and a + * disk is configured there, skip it. + */ + if (i == 0 && h->drv[i] && h->drv[i]->raid_level != -1) + continue; + + /* + * We've found an empty slot. Update highest_lun + * provided this isn't just the fake cxd0 controller node. + */ + if (i > h->highest_lun && !controller_node) + h->highest_lun = i; + + /* If adding a real disk at cxd0, and it's already alloc'ed */ + if (i == 0 && h->drv[i] != NULL) return i; - } + + /* + * Found an empty slot, not already alloc'ed. Allocate it. + * Mark it with raid_level == -1, so we know it's new later on. + */ + drv = kzalloc(sizeof(*drv), GFP_KERNEL); + if (!drv) + return -1; + drv->raid_level = -1; /* so we know it's new */ + h->drv[i] = drv; + return i; } return -1; } +static void cciss_free_drive_info(ctlr_info_t *h, int drv_index) +{ + kfree(h->drv[drv_index]); + h->drv[drv_index] = NULL; +} + +static void cciss_free_gendisk(ctlr_info_t *h, int drv_index) +{ + put_disk(h->gendisk[drv_index]); + h->gendisk[drv_index] = NULL; +} + /* cciss_add_gendisk finds a free hba[]->drv structure * and allocates a gendisk if needed, and sets the lunid * in the drvinfo structure. It returns the index into @@ -1824,13 +2047,15 @@ static int cciss_find_free_drive_index(int ctlr, int controller_node) * a means to talk to the controller in case no logical * drives have yet been configured. */ -static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node) +static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[], + int controller_node) { int drv_index; - drv_index = cciss_find_free_drive_index(h->ctlr, controller_node); + drv_index = cciss_alloc_drive_info(h, controller_node); if (drv_index == -1) return -1; + /*Check if the gendisk needs to be allocated */ if (!h->gendisk[drv_index]) { h->gendisk[drv_index] = @@ -1839,23 +2064,24 @@ static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node) printk(KERN_ERR "cciss%d: could not " "allocate a new disk %d\n", h->ctlr, drv_index); - return -1; + goto err_free_drive_info; } } - h->drv[drv_index].LunID = lunid; - if (cciss_create_ld_sysfs_entry(h, &h->drv[drv_index], drv_index)) + memcpy(h->drv[drv_index]->LunID, lunid, + sizeof(h->drv[drv_index]->LunID)); + if (cciss_create_ld_sysfs_entry(h, drv_index)) goto err_free_disk; - /* Don't need to mark this busy because nobody */ /* else knows about this disk yet to contend */ /* for access to it. */ - h->drv[drv_index].busy_configuring = 0; + h->drv[drv_index]->busy_configuring = 0; wmb(); return drv_index; err_free_disk: - put_disk(h->gendisk[drv_index]); - h->gendisk[drv_index] = NULL; + cciss_free_gendisk(h, drv_index); +err_free_drive_info: + cciss_free_drive_info(h, drv_index); return -1; } @@ -1872,21 +2098,25 @@ static void cciss_add_controller_node(ctlr_info_t *h) if (h->gendisk[0] != NULL) /* already did this? Then bail. */ return; - drv_index = cciss_add_gendisk(h, 0, 1); - if (drv_index == -1) { - printk(KERN_WARNING "cciss%d: could not " - "add disk 0.\n", h->ctlr); - return; - } - h->drv[drv_index].block_size = 512; - h->drv[drv_index].nr_blocks = 0; - h->drv[drv_index].heads = 0; - h->drv[drv_index].sectors = 0; - h->drv[drv_index].cylinders = 0; - h->drv[drv_index].raid_level = -1; - memset(h->drv[drv_index].serial_no, 0, 16); + drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1); + if (drv_index == -1) + goto error; + h->drv[drv_index]->block_size = 512; + h->drv[drv_index]->nr_blocks = 0; + h->drv[drv_index]->heads = 0; + h->drv[drv_index]->sectors = 0; + h->drv[drv_index]->cylinders = 0; + h->drv[drv_index]->raid_level = -1; + memset(h->drv[drv_index]->serial_no, 0, 16); disk = h->gendisk[drv_index]; - cciss_add_disk(h, disk, drv_index); + if (cciss_add_disk(h, disk, drv_index) == 0) + return; + cciss_free_gendisk(h, drv_index); + cciss_free_drive_info(h, drv_index); +error: + printk(KERN_WARNING "cciss%d: could not " + "add disk 0.\n", h->ctlr); + return; } /* This function will add and remove logical drives from the Logical @@ -1897,7 +2127,8 @@ static void cciss_add_controller_node(ctlr_info_t *h) * INPUT * h = The controller to perform the operations on */ -static int rebuild_lun_table(ctlr_info_t *h, int first_time) +static int rebuild_lun_table(ctlr_info_t *h, int first_time, + int via_ioctl) { int ctlr = h->ctlr; int num_luns; @@ -1907,7 +2138,7 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) int i; int drv_found; int drv_index = 0; - __u32 lunid = 0; + unsigned char lunid[8] = CTLR_LUNID; unsigned long flags; if (!capable(CAP_SYS_RAWIO)) @@ -1960,13 +2191,13 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) drv_found = 0; /* skip holes in the array from already deleted drives */ - if (h->drv[i].raid_level == -1) + if (h->drv[i] == NULL) continue; for (j = 0; j < num_luns; j++) { - memcpy(&lunid, &ld_buff->LUN[j][0], 4); - lunid = le32_to_cpu(lunid); - if (h->drv[i].LunID == lunid) { + memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid)); + if (memcmp(h->drv[i]->LunID, lunid, + sizeof(lunid)) == 0) { drv_found = 1; break; } @@ -1974,11 +2205,11 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) if (!drv_found) { /* Deregister it from the OS, it's gone. */ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags); - h->drv[i].busy_configuring = 1; + h->drv[i]->busy_configuring = 1; spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags); - return_code = deregister_disk(h, i, 1); - cciss_destroy_ld_sysfs_entry(&h->drv[i]); - h->drv[i].busy_configuring = 0; + return_code = deregister_disk(h, i, 1, via_ioctl); + if (h->drv[i] != NULL) + h->drv[i]->busy_configuring = 0; } } @@ -1992,17 +2223,16 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) drv_found = 0; - memcpy(&lunid, &ld_buff->LUN[i][0], 4); - lunid = le32_to_cpu(lunid); - + memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid)); /* Find if the LUN is already in the drive array * of the driver. If so then update its info * if not in use. If it does not exist then find * the first free index and add it. */ for (j = 0; j <= h->highest_lun; j++) { - if (h->drv[j].raid_level != -1 && - h->drv[j].LunID == lunid) { + if (h->drv[j] != NULL && + memcmp(h->drv[j]->LunID, lunid, + sizeof(h->drv[j]->LunID)) == 0) { drv_index = j; drv_found = 1; break; @@ -2015,7 +2245,8 @@ static int rebuild_lun_table(ctlr_info_t *h, int first_time) if (drv_index == -1) goto freeret; } - cciss_update_drive_info(ctlr, drv_index, first_time); + cciss_update_drive_info(ctlr, drv_index, first_time, + via_ioctl); } /* end for */ freeret: @@ -2032,6 +2263,25 @@ mem_msg: goto freeret; } +static void cciss_clear_drive_info(drive_info_struct *drive_info) +{ + /* zero out the disk size info */ + drive_info->nr_blocks = 0; + drive_info->block_size = 0; + drive_info->heads = 0; + drive_info->sectors = 0; + drive_info->cylinders = 0; + drive_info->raid_level = -1; + memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no)); + memset(drive_info->model, 0, sizeof(drive_info->model)); + memset(drive_info->rev, 0, sizeof(drive_info->rev)); + memset(drive_info->vendor, 0, sizeof(drive_info->vendor)); + /* + * don't clear the LUNID though, we need to remember which + * one this one is. + */ +} + /* This function will deregister the disk and it's queue from the * kernel. It must be called with the controller lock held and the * drv structures busy_configuring flag set. It's parameters are: @@ -2046,43 +2296,48 @@ mem_msg: * the disk in preparation for re-adding it. In this case * the highest_lun should be left unchanged and the LunID * should not be cleared. + * via_ioctl + * This indicates whether we've reached this path via ioctl. + * This affects the maximum usage count allowed for c0d0 to be messed with. + * If this path is reached via ioctl(), then the max_usage_count will + * be 1, as the process calling ioctl() has got to have the device open. + * If we get here via sysfs, then the max usage count will be zero. */ static int deregister_disk(ctlr_info_t *h, int drv_index, - int clear_all) + int clear_all, int via_ioctl) { int i; struct gendisk *disk; drive_info_struct *drv; + int recalculate_highest_lun; if (!capable(CAP_SYS_RAWIO)) return -EPERM; - drv = &h->drv[drv_index]; + drv = h->drv[drv_index]; disk = h->gendisk[drv_index]; /* make sure logical volume is NOT is use */ if (clear_all || (h->gendisk[0] == disk)) { - if (drv->usage_count > 1) + if (drv->usage_count > via_ioctl) return -EBUSY; } else if (drv->usage_count > 0) return -EBUSY; + recalculate_highest_lun = (drv == h->drv[h->highest_lun]); + /* invalidate the devices and deregister the disk. If it is disk * zero do not deregister it but just zero out it's values. This * allows us to delete disk zero but keep the controller registered. */ if (h->gendisk[0] != disk) { struct request_queue *q = disk->queue; - if (disk->flags & GENHD_FL_UP) + if (disk->flags & GENHD_FL_UP) { + cciss_destroy_ld_sysfs_entry(h, drv_index, 0); del_gendisk(disk); - if (q) { - blk_cleanup_queue(q); - /* Set drv->queue to NULL so that we do not try - * to call blk_start_queue on this queue in the - * interrupt handler - */ - drv->queue = NULL; } + if (q) + blk_cleanup_queue(q); /* If clear_all is set then we are deleting the logical * drive, not just refreshing its info. For drives * other than disk 0 we will call put_disk. We do not @@ -2105,34 +2360,20 @@ static int deregister_disk(ctlr_info_t *h, int drv_index, } } else { set_capacity(disk, 0); + cciss_clear_drive_info(drv); } --h->num_luns; - /* zero out the disk size info */ - drv->nr_blocks = 0; - drv->block_size = 0; - drv->heads = 0; - drv->sectors = 0; - drv->cylinders = 0; - drv->raid_level = -1; /* This can be used as a flag variable to - * indicate that this element of the drive - * array is free. - */ - - if (clear_all) { - /* check to see if it was the last disk */ - if (drv == h->drv + h->highest_lun) { - /* if so, find the new hightest lun */ - int i, newhighest = -1; - for (i = 0; i <= h->highest_lun; i++) { - /* if the disk has size > 0, it is available */ - if (h->drv[i].heads) - newhighest = i; - } - h->highest_lun = newhighest; - } - drv->LunID = 0; + /* if it was the last disk, find the new hightest lun */ + if (clear_all && recalculate_highest_lun) { + int i, newhighest = -1; + for (i = 0; i <= h->highest_lun; i++) { + /* if the disk has size > 0, it is available */ + if (h->drv[i] && h->drv[i]->heads) + newhighest = i; + } + h->highest_lun = newhighest; } return 0; } @@ -2479,8 +2720,6 @@ static void cciss_geometry_inquiry(int ctlr, int logvol, } else { /* Get geometry failed */ printk(KERN_WARNING "cciss: reading geometry failed\n"); } - printk(KERN_INFO " heads=%d, sectors=%d, cylinders=%d\n\n", - drv->heads, drv->sectors, drv->cylinders); } static void @@ -2514,9 +2753,6 @@ cciss_read_capacity(int ctlr, int logvol, int withirq, sector_t *total_size, *total_size = 0; *block_size = BLOCK_SIZE; } - if (*total_size != 0) - printk(KERN_INFO " blocks= %llu block_size= %d\n", - (unsigned long long)*total_size+1, *block_size); kfree(buf); } @@ -2568,7 +2804,8 @@ static int cciss_revalidate(struct gendisk *disk) InquiryData_struct *inq_buff = NULL; for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) { - if (h->drv[logvol].LunID == drv->LunID) { + if (memcmp(h->drv[logvol]->LunID, drv->LunID, + sizeof(drv->LunID)) == 0) { FOUND = 1; break; } @@ -3053,8 +3290,7 @@ static void do_cciss_request(struct request_queue *q) /* The first 2 bits are reserved for controller error reporting. */ c->Header.Tag.lower = (c->cmdindex << 3); c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */ - c->Header.LUN.LogDev.VolId = drv->LunID; - c->Header.LUN.LogDev.Mode = 1; + memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID)); c->Request.CDBLen = 10; // 12 byte commands not in FW yet; c->Request.Type.Type = TYPE_CMD; // It is a command. c->Request.Type.Attribute = ATTR_SIMPLE; @@ -3232,20 +3468,121 @@ static irqreturn_t do_cciss_intr(int irq, void *dev_id) return IRQ_HANDLED; } +/** + * add_to_scan_list() - add controller to rescan queue + * @h: Pointer to the controller. + * + * Adds the controller to the rescan queue if not already on the queue. + * + * returns 1 if added to the queue, 0 if skipped (could be on the + * queue already, or the controller could be initializing or shutting + * down). + **/ +static int add_to_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h; + int found = 0; + int ret = 0; + + if (h->busy_initializing) + return 0; + + if (!mutex_trylock(&h->busy_shutting_down)) + return 0; + + mutex_lock(&scan_mutex); + list_for_each_entry(test_h, &scan_q, scan_list) { + if (test_h == h) { + found = 1; + break; + } + } + if (!found && !h->busy_scanning) { + INIT_COMPLETION(h->scan_wait); + list_add_tail(&h->scan_list, &scan_q); + ret = 1; + } + mutex_unlock(&scan_mutex); + mutex_unlock(&h->busy_shutting_down); + + return ret; +} + +/** + * remove_from_scan_list() - remove controller from rescan queue + * @h: Pointer to the controller. + * + * Removes the controller from the rescan queue if present. Blocks if + * the controller is currently conducting a rescan. + **/ +static void remove_from_scan_list(struct ctlr_info *h) +{ + struct ctlr_info *test_h, *tmp_h; + int scanning = 0; + + mutex_lock(&scan_mutex); + list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) { + if (test_h == h) { + list_del(&h->scan_list); + complete_all(&h->scan_wait); + mutex_unlock(&scan_mutex); + return; + } + } + if (&h->busy_scanning) + scanning = 0; + mutex_unlock(&scan_mutex); + + if (scanning) + wait_for_completion(&h->scan_wait); +} + +/** + * scan_thread() - kernel thread used to rescan controllers + * @data: Ignored. + * + * A kernel thread used scan for drive topology changes on + * controllers. The thread processes only one controller at a time + * using a queue. Controllers are added to the queue using + * add_to_scan_list() and removed from the queue either after done + * processing or using remove_from_scan_list(). + * + * returns 0. + **/ static int scan_thread(void *data) { - ctlr_info_t *h = data; - int rc; - DECLARE_COMPLETION_ONSTACK(wait); - h->rescan_wait = &wait; + struct ctlr_info *h; - for (;;) { - rc = wait_for_completion_interruptible(&wait); + while (1) { + set_current_state(TASK_INTERRUPTIBLE); + schedule(); if (kthread_should_stop()) break; - if (!rc) - rebuild_lun_table(h, 0); + + while (1) { + mutex_lock(&scan_mutex); + if (list_empty(&scan_q)) { + mutex_unlock(&scan_mutex); + break; + } + + h = list_entry(scan_q.next, + struct ctlr_info, + scan_list); + list_del(&h->scan_list); + h->busy_scanning = 1; + mutex_unlock(&scan_mutex); + + if (h) { + rebuild_lun_table(h, 0, 0); + complete_all(&h->scan_wait); + mutex_lock(&scan_mutex); + h->busy_scanning = 0; + mutex_unlock(&scan_mutex); + } + } } + return 0; } @@ -3268,8 +3605,8 @@ static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c) case REPORT_LUNS_CHANGED: printk(KERN_WARNING "cciss%d: report LUN data " "changed\n", h->ctlr); - if (h->rescan_wait) - complete(h->rescan_wait); + add_to_scan_list(h); + wake_up_process(cciss_scan_thread); return 1; break; case POWER_OR_RESET: @@ -3422,7 +3759,27 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) __u64 cfg_offset; __u32 cfg_base_addr; __u64 cfg_base_addr_index; - int i, err; + int i, prod_index, err; + + subsystem_vendor_id = pdev->subsystem_vendor; + subsystem_device_id = pdev->subsystem_device; + board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | + subsystem_vendor_id); + + for (i = 0; i < ARRAY_SIZE(products); i++) { + /* Stand aside for hpsa driver on request */ + if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY) + return -ENODEV; + if (board_id == products[i].board_id) + break; + } + prod_index = i; + if (prod_index == ARRAY_SIZE(products)) { + dev_warn(&pdev->dev, + "unrecognized board ID: 0x%08lx, ignoring.\n", + (unsigned long) board_id); + return -ENODEV; + } /* check to see if controller has been disabled */ /* BEFORE trying to enable it */ @@ -3446,11 +3803,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) return err; } - subsystem_vendor_id = pdev->subsystem_vendor; - subsystem_device_id = pdev->subsystem_device; - board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) | - subsystem_vendor_id); - #ifdef CCISS_DEBUG printk("command = %x\n", command); printk("irq = %x\n", pdev->irq); @@ -3489,7 +3841,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) if (scratchpad == CCISS_FIRMWARE_READY) break; set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(HZ / 10); /* wait 100ms */ + schedule_timeout(msecs_to_jiffies(100)); /* wait 100ms */ } if (scratchpad != CCISS_FIRMWARE_READY) { printk(KERN_WARNING "cciss: Board not ready. Timed out.\n"); @@ -3536,14 +3888,9 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) * leave a little room for ioctl calls. */ c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); - for (i = 0; i < ARRAY_SIZE(products); i++) { - if (board_id == products[i].board_id) { - c->product_name = products[i].product_name; - c->access = *(products[i].access); - c->nr_cmds = c->max_commands - 4; - break; - } - } + c->product_name = products[prod_index].product_name; + c->access = *(products[prod_index].access); + c->nr_cmds = c->max_commands - 4; if ((readb(&c->cfgtable->Signature[0]) != 'C') || (readb(&c->cfgtable->Signature[1]) != 'I') || (readb(&c->cfgtable->Signature[2]) != 'S') || @@ -3552,27 +3899,6 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) err = -ENODEV; goto err_out_free_res; } - /* We didn't find the controller in our list. We know the - * signature is valid. If it's an HP device let's try to - * bind to the device and fire it up. Otherwise we bail. - */ - if (i == ARRAY_SIZE(products)) { - if (subsystem_vendor_id == PCI_VENDOR_ID_HP) { - c->product_name = products[i-1].product_name; - c->access = *(products[i-1].access); - c->nr_cmds = c->max_commands - 4; - printk(KERN_WARNING "cciss: This is an unknown " - "Smart Array controller.\n" - "cciss: Please update to the latest driver " - "available from www.hp.com.\n"); - } else { - printk(KERN_WARNING "cciss: Sorry, I don't know how" - " to access the Smart Array controller %08lx\n" - , (unsigned long)board_id); - err = -ENODEV; - goto err_out_free_res; - } - } #ifdef CONFIG_X86 { /* Need to enable prefetch in the SCSI core for 6400 in x86 */ @@ -3615,7 +3941,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) break; /* delay and try again */ set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(10); + schedule_timeout(msecs_to_jiffies(1)); } #ifdef CCISS_DEBUG @@ -3669,15 +3995,16 @@ Enomem: return -1; } -static void free_hba(int i) +static void free_hba(int n) { - ctlr_info_t *p = hba[i]; - int n; + ctlr_info_t *h = hba[n]; + int i; - hba[i] = NULL; - for (n = 0; n < CISS_MAX_LUN; n++) - put_disk(p->gendisk[n]); - kfree(p); + hba[n] = NULL; + for (i = 0; i < h->highest_lun + 1; i++) + if (h->gendisk[i] != NULL) + put_disk(h->gendisk[i]); + kfree(h); } /* Send a message CDB to the firmware. */ @@ -3918,14 +4245,17 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, hba[i]->busy_initializing = 1; INIT_HLIST_HEAD(&hba[i]->cmpQ); INIT_HLIST_HEAD(&hba[i]->reqQ); + mutex_init(&hba[i]->busy_shutting_down); if (cciss_pci_init(hba[i], pdev) != 0) - goto clean0; + goto clean_no_release_regions; sprintf(hba[i]->devname, "cciss%d", i); hba[i]->ctlr = i; hba[i]->pdev = pdev; + init_completion(&hba[i]->scan_wait); + if (cciss_create_hba_sysfs_entry(hba[i])) goto clean0; @@ -4001,8 +4331,7 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, hba[i]->num_luns = 0; hba[i]->highest_lun = -1; for (j = 0; j < CISS_MAX_LUN; j++) { - hba[i]->drv[j].raid_level = -1; - hba[i]->drv[j].queue = NULL; + hba[i]->drv[j] = NULL; hba[i]->gendisk[j] = NULL; } @@ -4035,14 +4364,8 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, hba[i]->cciss_max_sectors = 2048; + rebuild_lun_table(hba[i], 1, 0); hba[i]->busy_initializing = 0; - - rebuild_lun_table(hba[i], 1); - hba[i]->cciss_scan_thread = kthread_run(scan_thread, hba[i], - "cciss_scan%02d", i); - if (IS_ERR(hba[i]->cciss_scan_thread)) - return PTR_ERR(hba[i]->cciss_scan_thread); - return 1; clean4: @@ -4062,18 +4385,14 @@ clean2: clean1: cciss_destroy_hba_sysfs_entry(hba[i]); clean0: + pci_release_regions(pdev); +clean_no_release_regions: hba[i]->busy_initializing = 0; - /* cleanup any queues that may have been initialized */ - for (j=0; j <= hba[i]->highest_lun; j++){ - drive_info_struct *drv = &(hba[i]->drv[j]); - if (drv->queue) - blk_cleanup_queue(drv->queue); - } + /* * Deliberately omit pci_disable_device(): it does something nasty to * Smart Array controllers that pci_enable_device does not undo */ - pci_release_regions(pdev); pci_set_drvdata(pdev, NULL); free_hba(i); return -1; @@ -4125,8 +4444,9 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev) return; } - kthread_stop(hba[i]->cciss_scan_thread); + mutex_lock(&hba[i]->busy_shutting_down); + remove_from_scan_list(hba[i]); remove_proc_entry(hba[i]->devname, proc_cciss); unregister_blkdev(hba[i]->major, hba[i]->devname); @@ -4136,8 +4456,10 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev) if (disk) { struct request_queue *q = disk->queue; - if (disk->flags & GENHD_FL_UP) + if (disk->flags & GENHD_FL_UP) { + cciss_destroy_ld_sysfs_entry(hba[i], j, 1); del_gendisk(disk); + } if (q) blk_cleanup_queue(q); } @@ -4170,6 +4492,7 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev) pci_release_regions(pdev); pci_set_drvdata(pdev, NULL); cciss_destroy_hba_sysfs_entry(hba[i]); + mutex_unlock(&hba[i]->busy_shutting_down); free_hba(i); } @@ -4202,15 +4525,25 @@ static int __init cciss_init(void) if (err) return err; + /* Start the scan thread */ + cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan"); + if (IS_ERR(cciss_scan_thread)) { + err = PTR_ERR(cciss_scan_thread); + goto err_bus_unregister; + } + /* Register for our PCI devices */ err = pci_register_driver(&cciss_pci_driver); if (err) - goto err_bus_register; + goto err_thread_stop; - return 0; + return err; -err_bus_register: +err_thread_stop: + kthread_stop(cciss_scan_thread); +err_bus_unregister: bus_unregister(&cciss_bus_type); + return err; } @@ -4227,6 +4560,7 @@ static void __exit cciss_cleanup(void) cciss_remove_one(hba[i]->pdev); } } + kthread_stop(cciss_scan_thread); remove_proc_entry("driver/cciss", NULL); bus_unregister(&cciss_bus_type); } |