summaryrefslogtreecommitdiffstats
path: root/drivers/block/ps2esdi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block/ps2esdi.c')
-rw-r--r--drivers/block/ps2esdi.c1092
1 files changed, 1092 insertions, 0 deletions
diff --git a/drivers/block/ps2esdi.c b/drivers/block/ps2esdi.c
new file mode 100644
index 00000000000..29548784cb7
--- /dev/null
+++ b/drivers/block/ps2esdi.c
@@ -0,0 +1,1092 @@
+/* ps2esdi driver based on assembler code by Arindam Banerji,
+ written by Peter De Schrijver */
+/* Reassuring note to IBM : This driver was NOT developed by vice-versa
+ engineering the PS/2's BIOS */
+/* Dedicated to Wannes, Tofke, Ykke, Godot, Killroy and all those
+ other lovely fish out there... */
+/* This code was written during the long and boring WINA
+ elections 1994 */
+/* Thanks to Arindam Banerij for giving me the source of his driver */
+/* This code may be freely distributed and modified in any way,
+ as long as these notes remain intact */
+
+/* Revised: 05/07/94 by Arindam Banerji (axb@cse.nd.edu) */
+/* Revised: 09/08/94 by Peter De Schrijver (stud11@cc4.kuleuven.ac.be)
+ Thanks to Arindam Banerij for sending me the docs of the adapter */
+
+/* BA Modified for ThinkPad 720 by Boris Ashkinazi */
+/* (bash@vnet.ibm.com) 08/08/95 */
+
+/* Modified further for ThinkPad-720C by Uri Blumenthal */
+/* (uri@watson.ibm.com) Sep 11, 1995 */
+
+/* TODO :
+ + Timeouts
+ + Get disk parameters
+ + DMA above 16MB
+ + reset after read/write error
+ */
+
+#define DEVICE_NAME "PS/2 ESDI"
+
+#include <linux/config.h>
+#include <linux/major.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/genhd.h>
+#include <linux/ps2esdi.h>
+#include <linux/blkdev.h>
+#include <linux/mca-legacy.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/mca_dma.h>
+#include <asm/uaccess.h>
+
+#define PS2ESDI_IRQ 14
+#define MAX_HD 2
+#define MAX_RETRIES 5
+#define MAX_16BIT 65536
+#define ESDI_TIMEOUT 0xf000
+#define ESDI_STAT_TIMEOUT 4
+
+#define TYPE_0_CMD_BLK_LENGTH 2
+#define TYPE_1_CMD_BLK_LENGTH 4
+
+static void reset_ctrl(void);
+
+static int ps2esdi_geninit(void);
+
+static void do_ps2esdi_request(request_queue_t * q);
+
+static void ps2esdi_readwrite(int cmd, struct request *req);
+
+static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd,
+u_short cyl, u_short head, u_short sector, u_short length, u_char drive);
+
+static int ps2esdi_out_cmd_blk(u_short * cmd_blk);
+
+static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode);
+
+static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id,
+ struct pt_regs *regs);
+static void (*current_int_handler) (u_int) = NULL;
+static void ps2esdi_normal_interrupt_handler(u_int);
+static void ps2esdi_initial_reset_int_handler(u_int);
+static void ps2esdi_geometry_int_handler(u_int);
+static int ps2esdi_ioctl(struct inode *inode, struct file *file,
+ u_int cmd, u_long arg);
+
+static int ps2esdi_read_status_words(int num_words, int max_words, u_short * buffer);
+
+static void dump_cmd_complete_status(u_int int_ret_code);
+
+static void ps2esdi_get_device_cfg(void);
+
+static void ps2esdi_reset_timer(unsigned long unused);
+
+static u_int dma_arb_level; /* DMA arbitration level */
+
+static DECLARE_WAIT_QUEUE_HEAD(ps2esdi_int);
+
+static int no_int_yet;
+static int ps2esdi_drives;
+static u_short io_base;
+static struct timer_list esdi_timer =
+ TIMER_INITIALIZER(ps2esdi_reset_timer, 0, 0);
+static int reset_status;
+static int ps2esdi_slot = -1;
+static int tp720esdi = 0; /* Is it Integrated ESDI of ThinkPad-720? */
+static int intg_esdi = 0; /* If integrated adapter */
+struct ps2esdi_i_struct {
+ unsigned int head, sect, cyl, wpcom, lzone, ctl;
+};
+static DEFINE_SPINLOCK(ps2esdi_lock);
+static struct request_queue *ps2esdi_queue;
+static struct request *current_req;
+
+#if 0
+#if 0 /* try both - I don't know which one is better... UB */
+static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
+{
+ {4, 48, 1553, 0, 0, 0},
+ {0, 0, 0, 0, 0, 0}};
+#else
+static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
+{
+ {64, 32, 161, 0, 0, 0},
+ {0, 0, 0, 0, 0, 0}};
+#endif
+#endif
+static struct ps2esdi_i_struct ps2esdi_info[MAX_HD] =
+{
+ {0, 0, 0, 0, 0, 0},
+ {0, 0, 0, 0, 0, 0}};
+
+static struct block_device_operations ps2esdi_fops =
+{
+ .owner = THIS_MODULE,
+ .ioctl = ps2esdi_ioctl,
+};
+
+static struct gendisk *ps2esdi_gendisk[2];
+
+/* initialization routine called by ll_rw_blk.c */
+static int __init ps2esdi_init(void)
+{
+
+ int error = 0;
+
+ /* register the device - pass the name and major number */
+ if (register_blkdev(PS2ESDI_MAJOR, "ed"))
+ return -EBUSY;
+
+ /* set up some global information - indicating device specific info */
+ ps2esdi_queue = blk_init_queue(do_ps2esdi_request, &ps2esdi_lock);
+ if (!ps2esdi_queue) {
+ unregister_blkdev(PS2ESDI_MAJOR, "ed");
+ return -ENOMEM;
+ }
+
+ /* some minor housekeeping - setup the global gendisk structure */
+ error = ps2esdi_geninit();
+ if (error) {
+ printk(KERN_WARNING "PS2ESDI: error initialising"
+ " device, releasing resources\n");
+ unregister_blkdev(PS2ESDI_MAJOR, "ed");
+ blk_cleanup_queue(ps2esdi_queue);
+ return error;
+ }
+ return 0;
+} /* ps2esdi_init */
+
+#ifndef MODULE
+
+module_init(ps2esdi_init);
+
+#else
+
+static int cyl[MAX_HD] = {-1,-1};
+static int head[MAX_HD] = {-1, -1};
+static int sect[MAX_HD] = {-1, -1};
+
+module_param(tp720esdi, bool, 0);
+module_param_array(cyl, int, NULL, 0);
+module_param_array(head, int, NULL, 0);
+module_param_array(sect, int, NULL, 0);
+MODULE_LICENSE("GPL");
+
+int init_module(void) {
+ int drive;
+
+ for(drive = 0; drive < MAX_HD; drive++) {
+ struct ps2esdi_i_struct *info = &ps2esdi_info[drive];
+
+ if (cyl[drive] != -1) {
+ info->cyl = info->lzone = cyl[drive];
+ info->wpcom = 0;
+ }
+ if (head[drive] != -1) {
+ info->head = head[drive];
+ info->ctl = (head[drive] > 8 ? 8 : 0);
+ }
+ if (sect[drive] != -1) info->sect = sect[drive];
+ }
+ return ps2esdi_init();
+}
+
+void
+cleanup_module(void) {
+ int i;
+ if(ps2esdi_slot) {
+ mca_mark_as_unused(ps2esdi_slot);
+ mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL);
+ }
+ release_region(io_base, 4);
+ free_dma(dma_arb_level);
+ free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk);
+ unregister_blkdev(PS2ESDI_MAJOR, "ed");
+ blk_cleanup_queue(ps2esdi_queue);
+ for (i = 0; i < ps2esdi_drives; i++) {
+ del_gendisk(ps2esdi_gendisk[i]);
+ put_disk(ps2esdi_gendisk[i]);
+ }
+}
+#endif /* MODULE */
+
+/* handles boot time command line parameters */
+void __init tp720_setup(char *str, int *ints)
+{
+ /* no params, just sets the tp720esdi flag if it exists */
+
+ printk("%s: TP 720 ESDI flag set\n", DEVICE_NAME);
+ tp720esdi = 1;
+}
+
+void __init ed_setup(char *str, int *ints)
+{
+ int hdind = 0;
+
+ /* handles 3 parameters only - corresponding to
+ 1. Number of cylinders
+ 2. Number of heads
+ 3. Sectors/track
+ */
+
+ if (ints[0] != 3)
+ return;
+
+ /* print out the information - seen at boot time */
+ printk("%s: ints[0]=%d ints[1]=%d ints[2]=%d ints[3]=%d\n",
+ DEVICE_NAME, ints[0], ints[1], ints[2], ints[3]);
+
+ /* set the index into device specific information table */
+ if (ps2esdi_info[0].head != 0)
+ hdind = 1;
+
+ /* set up all the device information */
+ ps2esdi_info[hdind].head = ints[2];
+ ps2esdi_info[hdind].sect = ints[3];
+ ps2esdi_info[hdind].cyl = ints[1];
+ ps2esdi_info[hdind].wpcom = 0;
+ ps2esdi_info[hdind].lzone = ints[1];
+ ps2esdi_info[hdind].ctl = (ints[2] > 8 ? 8 : 0);
+#if 0 /* this may be needed for PS2/Mod.80, but it hurts ThinkPad! */
+ ps2esdi_drives = hdind + 1; /* increment index for the next time */
+#endif
+} /* ed_setup */
+
+static int ps2esdi_getinfo(char *buf, int slot, void *d)
+{
+ int len = 0;
+
+ len += sprintf(buf + len, "DMA Arbitration Level: %d\n",
+ dma_arb_level);
+ len += sprintf(buf + len, "IO Port: %x\n", io_base);
+ len += sprintf(buf + len, "IRQ: 14\n");
+ len += sprintf(buf + len, "Drives: %d\n", ps2esdi_drives);
+
+ return len;
+}
+
+/* ps2 esdi specific initialization - called thru the gendisk chain */
+static int __init ps2esdi_geninit(void)
+{
+ /*
+ The first part contains the initialization code
+ for the ESDI disk subsystem. All we really do
+ is search for the POS registers of the controller
+ to do some simple setup operations. First, we
+ must ensure that the controller is installed,
+ enabled, and configured as PRIMARY. Then we must
+ determine the DMA arbitration level being used by
+ the controller so we can handle data transfer
+ operations properly. If all of this works, then
+ we will set the INIT_FLAG to a non-zero value.
+ */
+
+ int slot = 0, i, reset_start, reset_end;
+ u_char status;
+ unsigned short adapterID;
+ int error = 0;
+
+ if ((slot = mca_find_adapter(INTG_ESDI_ID, 0)) != MCA_NOTFOUND) {
+ adapterID = INTG_ESDI_ID;
+ printk("%s: integrated ESDI adapter found in slot %d\n",
+ DEVICE_NAME, slot+1);
+#ifndef MODULE
+ mca_set_adapter_name(slot, "PS/2 Integrated ESDI");
+#endif
+ } else if ((slot = mca_find_adapter(NRML_ESDI_ID, 0)) != -1) {
+ adapterID = NRML_ESDI_ID;
+ printk("%s: normal ESDI adapter found in slot %d\n",
+ DEVICE_NAME, slot+1);
+ mca_set_adapter_name(slot, "PS/2 ESDI");
+ } else {
+ return -ENODEV;
+ }
+
+ ps2esdi_slot = slot;
+ mca_mark_as_used(slot);
+ mca_set_adapter_procfn(slot, (MCA_ProcFn) ps2esdi_getinfo, NULL);
+
+ /* Found the slot - read the POS register 2 to get the necessary
+ configuration and status information. POS register 2 has the
+ following information :
+ Bit Function
+ 7 reserved = 0
+ 6 arbitration method
+ 0 - fairness enabled
+ 1 - fairness disabled, linear priority assignment
+ 5-2 arbitration level
+ 1 alternate address
+ 1 alternate address
+ 0 - use addresses 0x3510 - 0x3517
+ 0 adapter enable
+ */
+
+ status = mca_read_stored_pos(slot, 2);
+ /* is it enabled ? */
+ if (!(status & STATUS_ENABLED)) {
+ printk("%s: ESDI adapter disabled\n", DEVICE_NAME);
+ error = -ENODEV;
+ goto err_out1;
+ }
+ /* try to grab IRQ, and try to grab a slow IRQ if it fails, so we can
+ share with the SCSI driver */
+ if (request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
+ SA_INTERRUPT | SA_SHIRQ, "PS/2 ESDI", &ps2esdi_gendisk)
+ && request_irq(PS2ESDI_IRQ, ps2esdi_interrupt_handler,
+ SA_SHIRQ, "PS/2 ESDI", &ps2esdi_gendisk)
+ ) {
+ printk("%s: Unable to get IRQ %d\n", DEVICE_NAME, PS2ESDI_IRQ);
+ error = -EBUSY;
+ goto err_out1;
+ }
+ if (status & STATUS_ALTERNATE)
+ io_base = ALT_IO_BASE;
+ else
+ io_base = PRIMARY_IO_BASE;
+
+ if (!request_region(io_base, 4, "ed")) {
+ printk(KERN_WARNING"Unable to request region 0x%x\n", io_base);
+ error = -EBUSY;
+ goto err_out2;
+ }
+ /* get the dma arbitration level */
+ dma_arb_level = (status >> 2) & 0xf;
+
+ /* BA */
+ printk("%s: DMA arbitration level : %d\n",
+ DEVICE_NAME, dma_arb_level);
+
+ LITE_ON;
+ current_int_handler = ps2esdi_initial_reset_int_handler;
+ reset_ctrl();
+ reset_status = 0;
+ reset_start = jiffies;
+ while (!reset_status) {
+ init_timer(&esdi_timer);
+ esdi_timer.expires = jiffies + HZ;
+ esdi_timer.data = 0;
+ add_timer(&esdi_timer);
+ sleep_on(&ps2esdi_int);
+ }
+ reset_end = jiffies;
+ LITE_OFF;
+ printk("%s: reset interrupt after %d jiffies, %u.%02u secs\n",
+ DEVICE_NAME, reset_end - reset_start, (reset_end - reset_start) / HZ,
+ (reset_end - reset_start) % HZ);
+
+
+ /* Integrated ESDI Disk and Controller has only one drive! */
+ if (adapterID == INTG_ESDI_ID) {/* if not "normal" PS2 ESDI adapter */
+ ps2esdi_drives = 1; /* then we have only one physical disk! */ intg_esdi = 1;
+ }
+
+
+
+ /* finally this part sets up some global data structures etc. */
+
+ ps2esdi_get_device_cfg();
+
+ /* some annoyance in the above routine returns TWO drives?
+ Is something else happining in the background?
+ Regaurdless we fix the # of drives again. AJK */
+ /* Integrated ESDI Disk and Controller has only one drive! */
+ if (adapterID == INTG_ESDI_ID) /* if not "normal" PS2 ESDI adapter */
+ ps2esdi_drives = 1; /* Not three or two, ONE DAMNIT! */
+
+ current_int_handler = ps2esdi_normal_interrupt_handler;
+
+ if (request_dma(dma_arb_level, "ed") !=0) {
+ printk(KERN_WARNING "PS2ESDI: Can't request dma-channel %d\n"
+ ,(int) dma_arb_level);
+ error = -EBUSY;
+ goto err_out3;
+ }
+ blk_queue_max_sectors(ps2esdi_queue, 128);
+
+ error = -ENOMEM;
+ for (i = 0; i < ps2esdi_drives; i++) {
+ struct gendisk *disk = alloc_disk(64);
+ if (!disk)
+ goto err_out4;
+ disk->major = PS2ESDI_MAJOR;
+ disk->first_minor = i<<6;
+ sprintf(disk->disk_name, "ed%c", 'a'+i);
+ sprintf(disk->devfs_name, "ed/target%d", i);
+ disk->fops = &ps2esdi_fops;
+ ps2esdi_gendisk[i] = disk;
+ }
+
+ for (i = 0; i < ps2esdi_drives; i++) {
+ struct gendisk *disk = ps2esdi_gendisk[i];
+ set_capacity(disk, ps2esdi_info[i].head * ps2esdi_info[i].sect *
+ ps2esdi_info[i].cyl);
+ disk->queue = ps2esdi_queue;
+ disk->private_data = &ps2esdi_info[i];
+ add_disk(disk);
+ }
+ return 0;
+err_out4:
+ while (i--)
+ put_disk(ps2esdi_gendisk[i]);
+err_out3:
+ release_region(io_base, 4);
+err_out2:
+ free_irq(PS2ESDI_IRQ, &ps2esdi_gendisk);
+err_out1:
+ if(ps2esdi_slot) {
+ mca_mark_as_unused(ps2esdi_slot);
+ mca_set_adapter_procfn(ps2esdi_slot, NULL, NULL);
+ }
+ return error;
+}
+
+static void __init ps2esdi_get_device_cfg(void)
+{
+ u_short cmd_blk[TYPE_0_CMD_BLK_LENGTH];
+
+ /*BA */ printk("%s: Drive 0\n", DEVICE_NAME);
+ current_int_handler = ps2esdi_geometry_int_handler;
+ cmd_blk[0] = CMD_GET_DEV_CONFIG | 0x600;
+ cmd_blk[1] = 0;
+ no_int_yet = TRUE;
+ ps2esdi_out_cmd_blk(cmd_blk);
+ if (no_int_yet)
+ sleep_on(&ps2esdi_int);
+
+ if (ps2esdi_drives > 1) {
+ printk("%s: Drive 1\n", DEVICE_NAME); /*BA */
+ cmd_blk[0] = CMD_GET_DEV_CONFIG | (1 << 5) | 0x600;
+ cmd_blk[1] = 0;
+ no_int_yet = TRUE;
+ ps2esdi_out_cmd_blk(cmd_blk);
+ if (no_int_yet)
+ sleep_on(&ps2esdi_int);
+ } /* if second physical drive is present */
+ return;
+}
+
+/* strategy routine that handles most of the IO requests */
+static void do_ps2esdi_request(request_queue_t * q)
+{
+ struct request *req;
+ /* since, this routine is called with interrupts cleared - they
+ must be before it finishes */
+
+ req = elv_next_request(q);
+ if (!req)
+ return;
+
+#if 0
+ printk("%s:got request. device : %s command : %d sector : %ld count : %ld, buffer: %p\n",
+ DEVICE_NAME,
+ req->rq_disk->disk_name,
+ req->cmd, req->sector,
+ req->current_nr_sectors, req->buffer);
+#endif
+
+ /* check for above 16Mb dmas */
+ if (isa_virt_to_bus(req->buffer + req->current_nr_sectors * 512) > 16 * MB) {
+ printk("%s: DMA above 16MB not supported\n", DEVICE_NAME);
+ end_request(req, FAIL);
+ return;
+ }
+
+ if (req->sector+req->current_nr_sectors > get_capacity(req->rq_disk)) {
+ printk("Grrr. error. ps2esdi_drives: %d, %llu %llu\n",
+ ps2esdi_drives, req->sector,
+ (unsigned long long)get_capacity(req->rq_disk));
+ end_request(req, FAIL);
+ return;
+ }
+
+ switch (rq_data_dir(req)) {
+ case READ:
+ ps2esdi_readwrite(READ, req);
+ break;
+ case WRITE:
+ ps2esdi_readwrite(WRITE, req);
+ break;
+ default:
+ printk("%s: Unknown command\n", req->rq_disk->disk_name);
+ end_request(req, FAIL);
+ break;
+ } /* handle different commands */
+} /* main strategy routine */
+
+/* resets the ESDI adapter */
+static void reset_ctrl(void)
+{
+
+ u_long expire;
+ u_short status;
+
+ /* enable interrupts on the controller */
+ status = inb(ESDI_INTRPT);
+ outb((status & 0xe0) | ATT_EOI, ESDI_ATTN); /* to be sure we don't have
+ any interrupt pending... */
+ outb_p(CTRL_ENABLE_INTR, ESDI_CONTROL);
+
+ /* read the ESDI status port - if the controller is not busy,
+ simply do a soft reset (fast) - otherwise we'll have to do a
+ hard (slow) reset. */
+ if (!(inb_p(ESDI_STATUS) & STATUS_BUSY)) {
+ /*BA */ printk("%s: soft reset...\n", DEVICE_NAME);
+ outb_p(CTRL_SOFT_RESET, ESDI_ATTN);
+ }
+ /* soft reset */
+ else {
+ /*BA */
+ printk("%s: hard reset...\n", DEVICE_NAME);
+ outb_p(CTRL_HARD_RESET, ESDI_CONTROL);
+ expire = jiffies + 2*HZ;
+ while (time_before(jiffies, expire));
+ outb_p(1, ESDI_CONTROL);
+ } /* hard reset */
+
+
+} /* reset the controller */
+
+/* called by the strategy routine to handle read and write requests */
+static void ps2esdi_readwrite(int cmd, struct request *req)
+{
+ struct ps2esdi_i_struct *p = req->rq_disk->private_data;
+ unsigned block = req->sector;
+ unsigned count = req->current_nr_sectors;
+ int drive = p - ps2esdi_info;
+ u_short track, head, cylinder, sector;
+ u_short cmd_blk[TYPE_1_CMD_BLK_LENGTH];
+
+ /* do some relevant arithmatic */
+ track = block / p->sect;
+ head = track % p->head;
+ cylinder = track / p->head;
+ sector = block % p->sect;
+
+#if 0
+ printk("%s: cyl=%d head=%d sect=%d\n", DEVICE_NAME, cylinder, head, sector);
+#endif
+ /* call the routine that actually fills out a command block */
+ ps2esdi_fill_cmd_block
+ (cmd_blk,
+ (cmd == READ) ? CMD_READ : CMD_WRITE,
+ cylinder, head, sector, count, drive);
+
+ /* send the command block to the controller */
+ current_req = req;
+ spin_unlock_irq(&ps2esdi_lock);
+ if (ps2esdi_out_cmd_blk(cmd_blk)) {
+ spin_lock_irq(&ps2esdi_lock);
+ printk("%s: Controller failed\n", DEVICE_NAME);
+ if ((++req->errors) >= MAX_RETRIES)
+ end_request(req, FAIL);
+ }
+ /* check for failure to put out the command block */
+ else {
+ spin_lock_irq(&ps2esdi_lock);
+#if 0
+ printk("%s: waiting for xfer\n", DEVICE_NAME);
+#endif
+ /* turn disk lights on */
+ LITE_ON;
+ }
+
+} /* ps2esdi_readwrite */
+
+/* fill out the command block */
+static void ps2esdi_fill_cmd_block(u_short * cmd_blk, u_short cmd,
+ u_short cyl, u_short head, u_short sector, u_short length, u_char drive)
+{
+
+ cmd_blk[0] = (drive << 5) | cmd;
+ cmd_blk[1] = length;
+ cmd_blk[2] = ((cyl & 0x1f) << 11) | (head << 5) | sector;
+ cmd_blk[3] = (cyl & 0x3E0) >> 5;
+
+} /* fill out the command block */
+
+/* write a command block to the controller */
+static int ps2esdi_out_cmd_blk(u_short * cmd_blk)
+{
+
+ int i;
+ unsigned long jif;
+ u_char status;
+
+ /* enable interrupts */
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+
+ /* do not write to the controller, if it is busy */
+ for (jif = jiffies + ESDI_STAT_TIMEOUT;
+ time_after(jif, jiffies) &&
+ (inb(ESDI_STATUS) & STATUS_BUSY); )
+ ;
+
+#if 0
+ printk("%s: i(1)=%ld\n", DEVICE_NAME, jif);
+#endif
+
+ /* if device is still busy - then just time out */
+ if (inb(ESDI_STATUS) & STATUS_BUSY) {
+ printk("%s: ps2esdi_out_cmd timed out (1)\n", DEVICE_NAME);
+ return ERROR;
+ } /* timeout ??? */
+ /* Set up the attention register in the controller */
+ outb(((*cmd_blk) & 0xE0) | 1, ESDI_ATTN);
+
+#if 0
+ printk("%s: sending %d words to controller\n", DEVICE_NAME, (((*cmd_blk) >> 14) + 1) << 1);
+#endif
+
+ /* one by one send each word out */
+ for (i = (((*cmd_blk) >> 14) + 1) << 1; i; i--) {
+ status = inb(ESDI_STATUS);
+ for (jif = jiffies + ESDI_STAT_TIMEOUT;
+ time_after(jif, jiffies) && (status & STATUS_BUSY) &&
+ (status & STATUS_CMD_INF); status = inb(ESDI_STATUS));
+ if ((status & (STATUS_BUSY | STATUS_CMD_INF)) == STATUS_BUSY) {
+#if 0
+ printk("%s: sending %04X\n", DEVICE_NAME, *cmd_blk);
+#endif
+ outw(*cmd_blk++, ESDI_CMD_INT);
+ } else {
+ printk("%s: ps2esdi_out_cmd timed out while sending command (status=%02X)\n",
+ DEVICE_NAME, status);
+ return ERROR;
+ }
+ } /* send all words out */
+ return OK;
+} /* send out the commands */
+
+
+/* prepare for dma - do all the necessary setup */
+static void ps2esdi_prep_dma(char *buffer, u_short length, u_char dma_xmode)
+{
+ unsigned long flags = claim_dma_lock();
+
+ mca_disable_dma(dma_arb_level);
+
+ mca_set_dma_addr(dma_arb_level, isa_virt_to_bus(buffer));
+
+ mca_set_dma_count(dma_arb_level, length * 512 / 2);
+
+ mca_set_dma_mode(dma_arb_level, dma_xmode);
+
+ mca_enable_dma(dma_arb_level);
+
+ release_dma_lock(flags);
+
+} /* prepare for dma */
+
+
+
+static irqreturn_t ps2esdi_interrupt_handler(int irq, void *dev_id,
+ struct pt_regs *regs)
+{
+ u_int int_ret_code;
+
+ if (inb(ESDI_STATUS) & STATUS_INTR) {
+ int_ret_code = inb(ESDI_INTRPT);
+ if (current_int_handler) {
+ /* Disable adapter interrupts till processing is finished */
+ outb(CTRL_DISABLE_INTR, ESDI_CONTROL);
+ current_int_handler(int_ret_code);
+ } else
+ printk("%s: help ! No interrupt handler.\n", DEVICE_NAME);
+ } else {
+ return IRQ_NONE;
+ }
+ return IRQ_HANDLED;
+}
+
+static void ps2esdi_initial_reset_int_handler(u_int int_ret_code)
+{
+
+ switch (int_ret_code & 0xf) {
+ case INT_RESET:
+ /*BA */
+ printk("%s: initial reset completed.\n", DEVICE_NAME);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ wake_up(&ps2esdi_int);
+ break;
+ case INT_ATTN_ERROR:
+ printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
+ int_ret_code);
+ printk("%s: status: %02x\n", DEVICE_NAME, inb(ESDI_STATUS));
+ break;
+ default:
+ printk("%s: initial reset handler received interrupt: %02X\n",
+ DEVICE_NAME, int_ret_code);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ break;
+ }
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+}
+
+
+static void ps2esdi_geometry_int_handler(u_int int_ret_code)
+{
+ u_int status, drive_num;
+ unsigned long rba;
+ int i;
+
+ drive_num = int_ret_code >> 5;
+ switch (int_ret_code & 0xf) {
+ case INT_CMD_COMPLETE:
+ for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
+ if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
+ printk("%s: timeout reading status word\n", DEVICE_NAME);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ break;
+ }
+ status = inw(ESDI_STT_INT);
+ if ((status & 0x1F) == CMD_GET_DEV_CONFIG) {
+#define REPLY_WORDS 5 /* we already read word 0 */
+ u_short reply[REPLY_WORDS];
+
+ if (ps2esdi_read_status_words((status >> 8) - 1, REPLY_WORDS, reply)) {
+ /*BA */
+ printk("%s: Device Configuration Status for drive %u\n",
+ DEVICE_NAME, drive_num);
+
+ printk("%s: Spares/cyls: %u", DEVICE_NAME, reply[0] >> 8);
+
+ printk
+ ("Config bits: %s%s%s%s%s\n",
+ (reply[0] & CONFIG_IS) ? "Invalid Secondary, " : "",
+ ((reply[0] & CONFIG_ZD) && !(reply[0] & CONFIG_IS))
+ ? "Zero Defect, " : "Defects Present, ",
+ (reply[0] & CONFIG_SF) ? "Skewed Format, " : "",
+ (reply[0] & CONFIG_FR) ? "Removable, " : "Non-Removable, ",
+ (reply[0] & CONFIG_RT) ? "No Retries" : "Retries");
+
+ rba = reply[1] | ((unsigned long) reply[2] << 16);
+ printk("%s: Number of RBA's: %lu\n", DEVICE_NAME, rba);
+
+ printk("%s: Physical number of cylinders: %u, Sectors/Track: %u, Heads: %u\n",
+ DEVICE_NAME, reply[3], reply[4] >> 8, reply[4] & 0xff);
+
+ if (!ps2esdi_info[drive_num].head) {
+ ps2esdi_info[drive_num].head = 64;
+ ps2esdi_info[drive_num].sect = 32;
+ ps2esdi_info[drive_num].cyl = rba / (64 * 32);
+ ps2esdi_info[drive_num].wpcom = 0;
+ ps2esdi_info[drive_num].lzone = ps2esdi_info[drive_num].cyl;
+ ps2esdi_info[drive_num].ctl = 8;
+ if (tp720esdi) { /* store the retrieved parameters */
+ ps2esdi_info[0].head = reply[4] & 0Xff;
+ ps2esdi_info[0].sect = reply[4] >> 8;
+ ps2esdi_info[0].cyl = reply[3];
+ ps2esdi_info[0].wpcom = 0;
+ ps2esdi_info[0].lzone = reply[3];
+ } else {
+ if (!intg_esdi)
+ ps2esdi_drives++;
+ }
+ }
+#ifdef OBSOLETE
+ if (!ps2esdi_info[drive_num].head) {
+ ps2esdi_info[drive_num].head = reply[4] & 0Xff;
+ ps2esdi_info[drive_num].sect = reply[4] >> 8;
+ ps2esdi_info[drive_num].cyl = reply[3];
+ ps2esdi_info[drive_num].wpcom = 0;
+ ps2esdi_info[drive_num].lzone = reply[3];
+ if (tp720esdi) { /* store the retrieved parameters */
+ ps2esdi_info[0].head = reply[4] & 0Xff;
+ ps2esdi_info[0].sect = reply[4] >> 8;
+ ps2esdi_info[0].cyl = reply[3];
+ ps2esdi_info[0].wpcom = 0;
+ ps2esdi_info[0].lzone = reply[3];
+ } else {
+ ps2esdi_drives++;
+ }
+ }
+#endif
+
+ } else
+ printk("%s: failed while getting device config\n", DEVICE_NAME);
+#undef REPLY_WORDS
+ } else
+ printk("%s: command %02X unknown by geometry handler\n",
+ DEVICE_NAME, status & 0x1f);
+
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ break;
+
+ case INT_ATTN_ERROR:
+ printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
+ int_ret_code);
+ printk("%s: Device not available\n", DEVICE_NAME);
+ break;
+ case INT_CMD_ECC:
+ case INT_CMD_RETRY:
+ case INT_CMD_ECC_RETRY:
+ case INT_CMD_WARNING:
+ case INT_CMD_ABORT:
+ case INT_CMD_FAILED:
+ case INT_DMA_ERR:
+ case INT_CMD_BLK_ERR:
+ /*BA */ printk("%s: Whaa. Error occurred...\n", DEVICE_NAME);
+ dump_cmd_complete_status(int_ret_code);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ break;
+ default:
+ printk("%s: Unknown interrupt reason: %02X\n",
+ DEVICE_NAME, int_ret_code & 0xf);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ break;
+ }
+
+ wake_up(&ps2esdi_int);
+ no_int_yet = FALSE;
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+
+}
+
+static void ps2esdi_normal_interrupt_handler(u_int int_ret_code)
+{
+ unsigned long flags;
+ u_int status;
+ u_int ending;
+ int i;
+
+ switch (int_ret_code & 0x0f) {
+ case INT_TRANSFER_REQ:
+ ps2esdi_prep_dma(current_req->buffer,
+ current_req->current_nr_sectors,
+ (rq_data_dir(current_req) == READ)
+ ? MCA_DMA_MODE_16 | MCA_DMA_MODE_WRITE | MCA_DMA_MODE_XFER
+ : MCA_DMA_MODE_16 | MCA_DMA_MODE_READ);
+ outb(CTRL_ENABLE_DMA | CTRL_ENABLE_INTR, ESDI_CONTROL);
+ ending = -1;
+ break;
+
+ case INT_ATTN_ERROR:
+ printk("%s: Attention error. interrupt status : %02X\n", DEVICE_NAME,
+ int_ret_code);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ ending = FAIL;
+ break;
+
+ case INT_CMD_COMPLETE:
+ for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
+ if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
+ printk("%s: timeout reading status word\n", DEVICE_NAME);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ if ((++current_req->errors) >= MAX_RETRIES)
+ ending = FAIL;
+ else
+ ending = -1;
+ break;
+ }
+ status = inw(ESDI_STT_INT);
+ switch (status & 0x1F) {
+ case (CMD_READ & 0xff):
+ case (CMD_WRITE & 0xff):
+ LITE_OFF;
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ ending = SUCCES;
+ break;
+ default:
+ printk("%s: interrupt for unknown command %02X\n",
+ DEVICE_NAME, status & 0x1f);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ ending = -1;
+ break;
+ }
+ break;
+ case INT_CMD_ECC:
+ case INT_CMD_RETRY:
+ case INT_CMD_ECC_RETRY:
+ LITE_OFF;
+ dump_cmd_complete_status(int_ret_code);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ ending = SUCCES;
+ break;
+ case INT_CMD_WARNING:
+ case INT_CMD_ABORT:
+ case INT_CMD_FAILED:
+ case INT_DMA_ERR:
+ LITE_OFF;
+ dump_cmd_complete_status(int_ret_code);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ if ((++current_req->errors) >= MAX_RETRIES)
+ ending = FAIL;
+ else
+ ending = -1;
+ break;
+
+ case INT_CMD_BLK_ERR:
+ dump_cmd_complete_status(int_ret_code);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ ending = FAIL;
+ break;
+
+ case INT_CMD_FORMAT:
+ printk("%s: huh ? Who issued this format command ?\n"
+ ,DEVICE_NAME);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ ending = -1;
+ break;
+
+ case INT_RESET:
+ /* BA printk("%s: reset completed.\n", DEVICE_NAME) */ ;
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ ending = -1;
+ break;
+
+ default:
+ printk("%s: Unknown interrupt reason: %02X\n",
+ DEVICE_NAME, int_ret_code & 0xf);
+ outb((int_ret_code & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ ending = -1;
+ break;
+ }
+ if(ending != -1) {
+ spin_lock_irqsave(&ps2esdi_lock, flags);
+ end_request(current_req, ending);
+ current_req = NULL;
+ do_ps2esdi_request(ps2esdi_queue);
+ spin_unlock_irqrestore(&ps2esdi_lock, flags);
+ }
+} /* handle interrupts */
+
+
+
+static int ps2esdi_read_status_words(int num_words,
+ int max_words,
+ u_short * buffer)
+{
+ int i;
+
+ for (; max_words && num_words; max_words--, num_words--, buffer++) {
+ for (i = ESDI_TIMEOUT; i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL); i--);
+ if (!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) {
+ printk("%s: timeout reading status word\n", DEVICE_NAME);
+ return FAIL;
+ }
+ *buffer = inw(ESDI_STT_INT);
+ }
+ return SUCCES;
+}
+
+
+
+
+static void dump_cmd_complete_status(u_int int_ret_code)
+{
+#define WAIT_FOR_STATUS \
+ for(i=ESDI_TIMEOUT;i && !(inb(ESDI_STATUS) & STATUS_STAT_AVAIL);i--); \
+ if(!(inb(ESDI_STATUS) & STATUS_STAT_AVAIL)) { \
+ printk("%s: timeout reading status word\n",DEVICE_NAME); \
+ return; \
+ }
+
+ int i, word_count;
+ u_short stat_word;
+ u_long rba;
+
+ printk("%s: Device: %u, interrupt ID: %02X\n",
+ DEVICE_NAME, int_ret_code >> 5,
+ int_ret_code & 0xf);
+
+ WAIT_FOR_STATUS;
+ stat_word = inw(ESDI_STT_INT);
+ word_count = (stat_word >> 8) - 1;
+ printk("%s: %u status words, command: %02X\n", DEVICE_NAME, word_count,
+ stat_word & 0xff);
+
+ if (word_count--) {
+ WAIT_FOR_STATUS;
+ stat_word = inw(ESDI_STT_INT);
+ printk("%s: command status code: %02X, command error code: %02X\n",
+ DEVICE_NAME, stat_word >> 8, stat_word & 0xff);
+ }
+ if (word_count--) {
+ WAIT_FOR_STATUS;
+ stat_word = inw(ESDI_STT_INT);
+ printk("%s: device error code: %s%s%s%s%s,%02X\n", DEVICE_NAME,
+ (stat_word & 0x1000) ? "Ready, " : "Not Ready, ",
+ (stat_word & 0x0800) ? "Selected, " : "Not Selected, ",
+ (stat_word & 0x0400) ? "Write Fault, " : "",
+ (stat_word & 0x0200) ? "Track 0, " : "",
+ (stat_word & 0x0100) ? "Seek or command complete, " : "",
+ stat_word >> 8);
+ }
+ if (word_count--) {
+ WAIT_FOR_STATUS;
+ stat_word = inw(ESDI_STT_INT);
+ printk("%s: Blocks to do: %u", DEVICE_NAME, stat_word);
+ }
+ if (word_count -= 2) {
+ WAIT_FOR_STATUS;
+ rba = inw(ESDI_STT_INT);
+ WAIT_FOR_STATUS;
+ rba |= inw(ESDI_STT_INT) << 16;
+ printk(", Last Cyl: %u Head: %u Sector: %u\n",
+ (u_short) ((rba & 0x1ff80000) >> 11),
+ (u_short) ((rba & 0x7E0) >> 5), (u_short) (rba & 0x1f));
+ } else
+ printk("\n");
+
+ if (word_count--) {
+ WAIT_FOR_STATUS;
+ stat_word = inw(ESDI_STT_INT);
+ printk("%s: Blocks required ECC: %u", DEVICE_NAME, stat_word);
+ }
+ printk("\n");
+
+#undef WAIT_FOR_STATUS
+
+}
+
+static int ps2esdi_ioctl(struct inode *inode,
+ struct file *file, u_int cmd, u_long arg)
+{
+ struct ps2esdi_i_struct *p = inode->i_bdev->bd_disk->private_data;
+ struct ps2esdi_geometry geom;
+
+ if (cmd != HDIO_GETGEO)
+ return -EINVAL;
+ memset(&geom, 0, sizeof(geom));
+ geom.heads = p->head;
+ geom.sectors = p->sect;
+ geom.cylinders = p->cyl;
+ geom.start = get_start_sect(inode->i_bdev);
+ if (copy_to_user((void __user *)arg, &geom, sizeof(geom)))
+ return -EFAULT;
+ return 0;
+}
+
+static void ps2esdi_reset_timer(unsigned long unused)
+{
+
+ int status;
+
+ status = inb(ESDI_INTRPT);
+ if ((status & 0xf) == INT_RESET) {
+ outb((status & 0xe0) | ATT_EOI, ESDI_ATTN);
+ outb(CTRL_ENABLE_INTR, ESDI_CONTROL);
+ reset_status = 1;
+ }
+ wake_up(&ps2esdi_int);
+}