summaryrefslogtreecommitdiffstats
path: root/drivers/block
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/block')
-rw-r--r--drivers/block/aoe/aoe.h1
-rw-r--r--drivers/block/aoe/aoedev.c2
-rw-r--r--drivers/block/aoe/aoenet.c2
-rw-r--r--drivers/block/ataflop.c4
-rw-r--r--drivers/block/cciss.c217
-rw-r--r--drivers/block/floppy.c79
-rw-r--r--drivers/block/loop.c3
-rw-r--r--drivers/block/nbd.c9
-rw-r--r--drivers/block/paride/pg.c2
-rw-r--r--drivers/block/xen-blkfront.c32
10 files changed, 303 insertions, 48 deletions
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index c237527b1aa..5e41e6dd657 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -18,6 +18,7 @@
enum {
AOECMD_ATA,
AOECMD_CFG,
+ AOECMD_VEND_MIN = 0xf0,
AOEFL_RSP = (1<<3),
AOEFL_ERR = (1<<2),
diff --git a/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c
index cc250577d40..eeea477d960 100644
--- a/drivers/block/aoe/aoedev.c
+++ b/drivers/block/aoe/aoedev.c
@@ -173,7 +173,7 @@ skbfree(struct sk_buff *skb)
return;
while (atomic_read(&skb_shinfo(skb)->dataref) != 1 && i-- > 0)
msleep(Sms);
- if (i <= 0) {
+ if (i < 0) {
printk(KERN_ERR
"aoe: %s holds ref: %s\n",
skb->dev ? skb->dev->name : "netif",
diff --git a/drivers/block/aoe/aoenet.c b/drivers/block/aoe/aoenet.c
index 30de5b1c647..c6099ba9a4b 100644
--- a/drivers/block/aoe/aoenet.c
+++ b/drivers/block/aoe/aoenet.c
@@ -142,6 +142,8 @@ aoenet_rcv(struct sk_buff *skb, struct net_device *ifp, struct packet_type *pt,
aoecmd_cfg_rsp(skb);
break;
default:
+ if (h->cmd >= AOECMD_VEND_MIN)
+ break; /* don't complain about vendor commands */
printk(KERN_INFO "aoe: unknown cmd %d\n", h->cmd);
}
exit:
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 69e1df7dfa1..4234c11c1e4 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -1730,7 +1730,7 @@ static int __init fd_test_drive_present( int drive )
timeout = jiffies + 2*HZ+HZ/2;
while (time_before(jiffies, timeout))
- if (!(mfp.par_dt_reg & 0x20))
+ if (!(st_mfp.par_dt_reg & 0x20))
break;
status = FDC_READ( FDCREG_STATUS );
@@ -1747,7 +1747,7 @@ static int __init fd_test_drive_present( int drive )
/* dummy seek command to make WP bit accessible */
FDC_WRITE( FDCREG_DATA, 0 );
FDC_WRITE( FDCREG_CMD, FDCCMD_SEEK );
- while( mfp.par_dt_reg & 0x20 )
+ while( st_mfp.par_dt_reg & 0x20 )
;
status = FDC_READ( FDCREG_STATUS );
}
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 01e69383d9c..4f9b6d79201 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3390,6 +3390,203 @@ static void free_hba(int i)
kfree(p);
}
+/* Send a message CDB to the firmware. */
+static __devinit int cciss_message(struct pci_dev *pdev, unsigned char opcode, unsigned char type)
+{
+ typedef struct {
+ CommandListHeader_struct CommandHeader;
+ RequestBlock_struct Request;
+ ErrDescriptor_struct ErrorDescriptor;
+ } Command;
+ static const size_t cmd_sz = sizeof(Command) + sizeof(ErrorInfo_struct);
+ Command *cmd;
+ dma_addr_t paddr64;
+ uint32_t paddr32, tag;
+ void __iomem *vaddr;
+ int i, err;
+
+ vaddr = ioremap_nocache(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
+ if (vaddr == NULL)
+ return -ENOMEM;
+
+ /* The Inbound Post Queue only accepts 32-bit physical addresses for the
+ CCISS commands, so they must be allocated from the lower 4GiB of
+ memory. */
+ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ cmd = pci_alloc_consistent(pdev, cmd_sz, &paddr64);
+ if (cmd == NULL) {
+ iounmap(vaddr);
+ return -ENOMEM;
+ }
+
+ /* This must fit, because of the 32-bit consistent DMA mask. Also,
+ although there's no guarantee, we assume that the address is at
+ least 4-byte aligned (most likely, it's page-aligned). */
+ paddr32 = paddr64;
+
+ cmd->CommandHeader.ReplyQueue = 0;
+ cmd->CommandHeader.SGList = 0;
+ cmd->CommandHeader.SGTotal = 0;
+ cmd->CommandHeader.Tag.lower = paddr32;
+ cmd->CommandHeader.Tag.upper = 0;
+ memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
+
+ cmd->Request.CDBLen = 16;
+ cmd->Request.Type.Type = TYPE_MSG;
+ cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
+ cmd->Request.Type.Direction = XFER_NONE;
+ cmd->Request.Timeout = 0; /* Don't time out */
+ cmd->Request.CDB[0] = opcode;
+ cmd->Request.CDB[1] = type;
+ memset(&cmd->Request.CDB[2], 0, 14); /* the rest of the CDB is reserved */
+
+ cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(Command);
+ cmd->ErrorDescriptor.Addr.upper = 0;
+ cmd->ErrorDescriptor.Len = sizeof(ErrorInfo_struct);
+
+ writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
+
+ for (i = 0; i < 10; i++) {
+ tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
+ if ((tag & ~3) == paddr32)
+ break;
+ schedule_timeout_uninterruptible(HZ);
+ }
+
+ iounmap(vaddr);
+
+ /* we leak the DMA buffer here ... no choice since the controller could
+ still complete the command. */
+ if (i == 10) {
+ printk(KERN_ERR "cciss: controller message %02x:%02x timed out\n",
+ opcode, type);
+ return -ETIMEDOUT;
+ }
+
+ pci_free_consistent(pdev, cmd_sz, cmd, paddr64);
+
+ if (tag & 2) {
+ printk(KERN_ERR "cciss: controller message %02x:%02x failed\n",
+ opcode, type);
+ return -EIO;
+ }
+
+ printk(KERN_INFO "cciss: controller message %02x:%02x succeeded\n",
+ opcode, type);
+ return 0;
+}
+
+#define cciss_soft_reset_controller(p) cciss_message(p, 1, 0)
+#define cciss_noop(p) cciss_message(p, 3, 0)
+
+static __devinit int cciss_reset_msi(struct pci_dev *pdev)
+{
+/* the #defines are stolen from drivers/pci/msi.h. */
+#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
+#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
+
+ int pos;
+ u16 control = 0;
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSI_FLAGS_ENABLE) {
+ printk(KERN_INFO "cciss: resetting MSI\n");
+ pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSI_FLAGS_ENABLE);
+ }
+ }
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+ if (pos) {
+ pci_read_config_word(pdev, msi_control_reg(pos), &control);
+ if (control & PCI_MSIX_FLAGS_ENABLE) {
+ printk(KERN_INFO "cciss: resetting MSI-X\n");
+ pci_write_config_word(pdev, msi_control_reg(pos), control & ~PCI_MSIX_FLAGS_ENABLE);
+ }
+ }
+
+ return 0;
+}
+
+/* This does a hard reset of the controller using PCI power management
+ * states. */
+static __devinit int cciss_hard_reset_controller(struct pci_dev *pdev)
+{
+ u16 pmcsr, saved_config_space[32];
+ int i, pos;
+
+ printk(KERN_INFO "cciss: using PCI PM to reset controller\n");
+
+ /* This is very nearly the same thing as
+
+ pci_save_state(pci_dev);
+ pci_set_power_state(pci_dev, PCI_D3hot);
+ pci_set_power_state(pci_dev, PCI_D0);
+ pci_restore_state(pci_dev);
+
+ but we can't use these nice canned kernel routines on
+ kexec, because they also check the MSI/MSI-X state in PCI
+ configuration space and do the wrong thing when it is
+ set/cleared. Also, the pci_save/restore_state functions
+ violate the ordering requirements for restoring the
+ configuration space from the CCISS document (see the
+ comment below). So we roll our own .... */
+
+ for (i = 0; i < 32; i++)
+ pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
+
+ pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pos == 0) {
+ printk(KERN_ERR "cciss_reset_controller: PCI PM not supported\n");
+ return -ENODEV;
+ }
+
+ /* Quoting from the Open CISS Specification: "The Power
+ * Management Control/Status Register (CSR) controls the power
+ * state of the device. The normal operating state is D0,
+ * CSR=00h. The software off state is D3, CSR=03h. To reset
+ * the controller, place the interface device in D3 then to
+ * D0, this causes a secondary PCI reset which will reset the
+ * controller." */
+
+ /* enter the D3hot power management state */
+ pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D3hot;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ schedule_timeout_uninterruptible(HZ >> 1);
+
+ /* enter the D0 power management state */
+ pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
+ pmcsr |= PCI_D0;
+ pci_write_config_word(pdev, pos + PCI_PM_CTRL, pmcsr);
+
+ schedule_timeout_uninterruptible(HZ >> 1);
+
+ /* Restore the PCI configuration space. The Open CISS
+ * Specification says, "Restore the PCI Configuration
+ * Registers, offsets 00h through 60h. It is important to
+ * restore the command register, 16-bits at offset 04h,
+ * last. Do not restore the configuration status register,
+ * 16-bits at offset 06h." Note that the offset is 2*i. */
+ for (i = 0; i < 32; i++) {
+ if (i == 2 || i == 3)
+ continue;
+ pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+ }
+ wmb();
+ pci_write_config_word(pdev, 4, saved_config_space[2]);
+
+ return 0;
+}
+
/*
* This is it. Find all the controllers and register them. I really hate
* stealing all these major device numbers.
@@ -3404,6 +3601,26 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
int dac, return_code;
InquiryData_struct *inq_buff = NULL;
+ if (reset_devices) {
+ /* Reset the controller with a PCI power-cycle */
+ if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
+ return -ENODEV;
+
+ /* Now try to get the controller to respond to a no-op. Some
+ devices (notably the HP Smart Array 5i Controller) need
+ up to 30 seconds to respond. */
+ for (i=0; i<30; i++) {
+ if (cciss_noop(pdev) == 0)
+ break;
+
+ schedule_timeout_uninterruptible(HZ);
+ }
+ if (i == 30) {
+ printk(KERN_ERR "cciss: controller seems dead\n");
+ return -EBUSY;
+ }
+ }
+
i = alloc_cciss_hba();
if (i < 0)
return -1;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index cf29cc4e6ab..83d8ed39433 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -558,6 +558,8 @@ static void process_fd_request(void);
static void recalibrate_floppy(void);
static void floppy_shutdown(unsigned long);
+static int floppy_request_regions(int);
+static void floppy_release_regions(int);
static int floppy_grab_irq_and_dma(void);
static void floppy_release_irq_and_dma(void);
@@ -4274,8 +4276,7 @@ static int __init floppy_init(void)
FDCS->rawcmd = 2;
if (user_reset_fdc(-1, FD_RESET_ALWAYS, 0)) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
FDCS->version = FDC_NONE;
continue;
@@ -4284,8 +4285,7 @@ static int __init floppy_init(void)
FDCS->version = get_fdc_version();
if (FDCS->version == FDC_NONE) {
/* free ioports reserved by floppy_grab_irq_and_dma() */
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
+ floppy_release_regions(fdc);
FDCS->address = -1;
continue;
}
@@ -4358,6 +4358,47 @@ out_put_disk:
static DEFINE_SPINLOCK(floppy_usage_lock);
+static const struct io_region {
+ int offset;
+ int size;
+} io_regions[] = {
+ { 2, 1 },
+ /* address + 3 is sometimes reserved by pnp bios for motherboard */
+ { 4, 2 },
+ /* address + 6 is reserved, and may be taken by IDE.
+ * Unfortunately, Adaptec doesn't know this :-(, */
+ { 7, 1 },
+};
+
+static void floppy_release_allocated_regions(int fdc, const struct io_region *p)
+{
+ while (p != io_regions) {
+ p--;
+ release_region(FDCS->address + p->offset, p->size);
+ }
+}
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+static int floppy_request_regions(int fdc)
+{
+ const struct io_region *p;
+
+ for (p = io_regions; p < ARRAY_END(io_regions); p++) {
+ if (!request_region(FDCS->address + p->offset, p->size, "floppy")) {
+ DPRINT("Floppy io-port 0x%04lx in use\n", FDCS->address + p->offset);
+ floppy_release_allocated_regions(fdc, p);
+ return -EBUSY;
+ }
+ }
+ return 0;
+}
+
+static void floppy_release_regions(int fdc)
+{
+ floppy_release_allocated_regions(fdc, ARRAY_END(io_regions));
+}
+
static int floppy_grab_irq_and_dma(void)
{
unsigned long flags;
@@ -4399,18 +4440,8 @@ static int floppy_grab_irq_and_dma(void)
for (fdc = 0; fdc < N_FDC; fdc++) {
if (FDCS->address != -1) {
- if (!request_region(FDCS->address + 2, 4, "floppy")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 2);
- goto cleanup1;
- }
- if (!request_region(FDCS->address + 7, 1, "floppy DIR")) {
- DPRINT("Floppy io-port 0x%04lx in use\n",
- FDCS->address + 7);
- goto cleanup2;
- }
- /* address + 6 is reserved, and may be taken by IDE.
- * Unfortunately, Adaptec doesn't know this :-(, */
+ if (floppy_request_regions(fdc))
+ goto cleanup;
}
}
for (fdc = 0; fdc < N_FDC; fdc++) {
@@ -4432,15 +4463,11 @@ static int floppy_grab_irq_and_dma(void)
fdc = 0;
irqdma_allocated = 1;
return 0;
-cleanup2:
- release_region(FDCS->address + 2, 4);
-cleanup1:
+cleanup:
fd_free_irq();
fd_free_dma();
- while (--fdc >= 0) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ while (--fdc >= 0)
+ floppy_release_regions(fdc);
spin_lock_irqsave(&floppy_usage_lock, flags);
usage_count--;
spin_unlock_irqrestore(&floppy_usage_lock, flags);
@@ -4501,10 +4528,8 @@ static void floppy_release_irq_and_dma(void)
#endif
old_fdc = fdc;
for (fdc = 0; fdc < N_FDC; fdc++)
- if (FDCS->address != -1) {
- release_region(FDCS->address + 2, 4);
- release_region(FDCS->address + 7, 1);
- }
+ if (FDCS->address != -1)
+ floppy_release_regions(fdc);
fdc = old_fdc;
}
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index edbaac6c057..bf034557767 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -392,8 +392,7 @@ lo_splice_actor(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
struct loop_device *lo = p->lo;
struct page *page = buf->page;
sector_t IV;
- size_t size;
- int ret;
+ int size, ret;
ret = buf->ops->confirm(pipe, buf);
if (unlikely(ret))
diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
index 34f80fa6fed..8299e2d3b61 100644
--- a/drivers/block/nbd.c
+++ b/drivers/block/nbd.c
@@ -549,6 +549,15 @@ static void do_nbd_request(struct request_queue * q)
BUG_ON(lo->magic != LO_MAGIC);
+ if (unlikely(!lo->sock)) {
+ printk(KERN_ERR "%s: Attempted send on closed socket\n",
+ lo->disk->disk_name);
+ req->errors++;
+ nbd_end_request(req);
+ spin_lock_irq(q->queue_lock);
+ continue;
+ }
+
spin_lock_irq(&lo->queue_lock);
list_add_tail(&req->queuelist, &lo->waiting_queue);
spin_unlock_irq(&lo->queue_lock);
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index 9dfa2716300..c397b3ddba9 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -422,7 +422,7 @@ static void xs(char *buf, char *targ, int len)
for (k = 0; k < len; k++) {
char c = *buf++;
- if (c != ' ' || c != l)
+ if (c != ' ' && c != l)
l = *targ++ = c;
}
if (l == ' ')
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 918ef725de4..8f905089b72 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -40,6 +40,7 @@
#include <linux/hdreg.h>
#include <linux/cdrom.h>
#include <linux/module.h>
+#include <linux/scatterlist.h>
#include <xen/xenbus.h>
#include <xen/grant_table.h>
@@ -82,6 +83,7 @@ struct blkfront_info
enum blkif_state connected;
int ring_ref;
struct blkif_front_ring ring;
+ struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
unsigned int evtchn, irq;
struct request_queue *rq;
struct work_struct work;
@@ -204,12 +206,11 @@ static int blkif_queue_request(struct request *req)
struct blkfront_info *info = req->rq_disk->private_data;
unsigned long buffer_mfn;
struct blkif_request *ring_req;
- struct req_iterator iter;
- struct bio_vec *bvec;
unsigned long id;
unsigned int fsect, lsect;
- int ref;
+ int i, ref;
grant_ref_t gref_head;
+ struct scatterlist *sg;
if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
return 1;
@@ -238,12 +239,13 @@ static int blkif_queue_request(struct request *req)
if (blk_barrier_rq(req))
ring_req->operation = BLKIF_OP_WRITE_BARRIER;
- ring_req->nr_segments = 0;
- rq_for_each_segment(bvec, req, iter) {
- BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST);
- buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page));
- fsect = bvec->bv_offset >> 9;
- lsect = fsect + (bvec->bv_len >> 9) - 1;
+ ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
+ BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
+ for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
+ buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
+ fsect = sg->offset >> 9;
+ lsect = fsect + (sg->length >> 9) - 1;
/* install a grant reference. */
ref = gnttab_claim_grant_reference(&gref_head);
BUG_ON(ref == -ENOSPC);
@@ -254,16 +256,12 @@ static int blkif_queue_request(struct request *req)
buffer_mfn,
rq_data_dir(req) );
- info->shadow[id].frame[ring_req->nr_segments] =
- mfn_to_pfn(buffer_mfn);
-
- ring_req->seg[ring_req->nr_segments] =
+ info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
+ ring_req->seg[i] =
(struct blkif_request_segment) {
.gref = ref,
.first_sect = fsect,
.last_sect = lsect };
-
- ring_req->nr_segments++;
}
info->ring.req_prod_pvt++;
@@ -622,6 +620,8 @@ static int setup_blkring(struct xenbus_device *dev,
SHARED_RING_INIT(sring);
FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE);
+ sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
if (err < 0) {
free_page((unsigned long)sring);
@@ -977,6 +977,8 @@ static void backend_changed(struct xenbus_device *dev,
break;
case XenbusStateClosing:
+ if (info->gd == NULL)
+ xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
bd = bdget_disk(info->gd, 0);
if (bd == NULL)
xenbus_dev_fatal(dev, -ENODEV, "bdget failed");