1 files changed, 406 insertions, 16 deletions

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 7e351e34547..7a7e5f8ecad 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -23,6 +23,7 @@
 
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/firmware.h>
 
 #include <net/bluetooth/bluetooth.h>
 #include <net/bluetooth/hci_core.h>
@@ -47,6 +48,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_BROKEN_ISOC	0x20
 #define BTUSB_WRONG_SCO_MTU	0x40
 #define BTUSB_ATH3012		0x80
+#define BTUSB_INTEL		0x100
 
 static struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -131,9 +133,13 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
 
 	/* Atheros 3012 with sflash firmware */
+	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3006), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
@@ -144,6 +150,7 @@ static struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
+	{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
 
 	/* Atheros AR5BBU12 with sflash firmware */
 	{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -202,6 +209,9 @@ static struct usb_device_id blacklist_table[] = {
 	/* Frontline ComProbe Bluetooth Sniffer */
 	{ USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER },
 
+	/* Intel Bluetooth device */
+	{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
+
 	{ }	/* Terminating entry */
 };
 
@@ -922,6 +932,391 @@ static void btusb_waker(struct work_struct *work)
 	usb_autopm_put_interface(data->intf);
 }
 
+static int btusb_setup_bcm92035(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	u8 val = 0x00;
+
+	BT_DBG("%s", hdev->name);
+
+	skb = __hci_cmd_sync(hdev, 0xfc3b, 1, &val, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb))
+		BT_ERR("BCM92035 command failed (%ld)", -PTR_ERR(skb));
+	else
+		kfree_skb(skb);
+
+	return 0;
+}
+
+struct intel_version {
+	u8 status;
+	u8 hw_platform;
+	u8 hw_variant;
+	u8 hw_revision;
+	u8 fw_variant;
+	u8 fw_revision;
+	u8 fw_build_num;
+	u8 fw_build_ww;
+	u8 fw_build_yy;
+	u8 fw_patch_num;
+} __packed;
+
+static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
+						struct intel_version *ver)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int ret;
+
+	snprintf(fwname, sizeof(fwname),
+		 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
+		 ver->hw_platform, ver->hw_variant, ver->hw_revision,
+		 ver->fw_variant,  ver->fw_revision, ver->fw_build_num,
+		 ver->fw_build_ww, ver->fw_build_yy);
+
+	ret = request_firmware(&fw, fwname, &hdev->dev);
+	if (ret < 0) {
+		if (ret == -EINVAL) {
+			BT_ERR("%s Intel firmware file request failed (%d)",
+			       hdev->name, ret);
+			return NULL;
+		}
+
+		BT_ERR("%s failed to open Intel firmware file: %s(%d)",
+		       hdev->name, fwname, ret);
+
+		/* If the correct firmware patch file is not found, use the
+		 * default firmware patch file instead
+		 */
+		snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
+			 ver->hw_platform, ver->hw_variant);
+		if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
+			BT_ERR("%s failed to open default Intel fw file: %s",
+			       hdev->name, fwname);
+			return NULL;
+		}
+	}
+
+	BT_INFO("%s: Intel Bluetooth firmware file: %s", hdev->name, fwname);
+
+	return fw;
+}
+
+static int btusb_setup_intel_patching(struct hci_dev *hdev,
+				      const struct firmware *fw,
+				      const u8 **fw_ptr, int *disable_patch)
+{
+	struct sk_buff *skb;
+	struct hci_command_hdr *cmd;
+	const u8 *cmd_param;
+	struct hci_event_hdr *evt = NULL;
+	const u8 *evt_param = NULL;
+	int remain = fw->size - (*fw_ptr - fw->data);
+
+	/* The first byte indicates the types of the patch command or event.
+	 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
+	 * in the current firmware buffer doesn't start with 0x01 or
+	 * the size of remain buffer is smaller than HCI command header,
+	 * the firmware file is corrupted and it should stop the patching
+	 * process.
+	 */
+	if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
+		BT_ERR("%s Intel fw corrupted: invalid cmd read", hdev->name);
+		return -EINVAL;
+	}
+	(*fw_ptr)++;
+	remain--;
+
+	cmd = (struct hci_command_hdr *)(*fw_ptr);
+	*fw_ptr += sizeof(*cmd);
+	remain -= sizeof(*cmd);
+
+	/* Ensure that the remain firmware data is long enough than the length
+	 * of command parameter. If not, the firmware file is corrupted.
+	 */
+	if (remain < cmd->plen) {
+		BT_ERR("%s Intel fw corrupted: invalid cmd len", hdev->name);
+		return -EFAULT;
+	}
+
+	/* If there is a command that loads a patch in the firmware
+	 * file, then enable the patch upon success, otherwise just
+	 * disable the manufacturer mode, for example patch activation
+	 * is not required when the default firmware patch file is used
+	 * because there are no patch data to load.
+	 */
+	if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
+		*disable_patch = 0;
+
+	cmd_param = *fw_ptr;
+	*fw_ptr += cmd->plen;
+	remain -= cmd->plen;
+
+	/* This reads the expected events when the above command is sent to the
+	 * device. Some vendor commands expects more than one events, for
+	 * example command status event followed by vendor specific event.
+	 * For this case, it only keeps the last expected event. so the command
+	 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
+	 * last expected event.
+	 */
+	while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
+		(*fw_ptr)++;
+		remain--;
+
+		evt = (struct hci_event_hdr *)(*fw_ptr);
+		*fw_ptr += sizeof(*evt);
+		remain -= sizeof(*evt);
+
+		if (remain < evt->plen) {
+			BT_ERR("%s Intel fw corrupted: invalid evt len",
+			       hdev->name);
+			return -EFAULT;
+		}
+
+		evt_param = *fw_ptr;
+		*fw_ptr += evt->plen;
+		remain -= evt->plen;
+	}
+
+	/* Every HCI commands in the firmware file has its correspond event.
+	 * If event is not found or remain is smaller than zero, the firmware
+	 * file is corrupted.
+	 */
+	if (!evt || !evt_param || remain < 0) {
+		BT_ERR("%s Intel fw corrupted: invalid evt read", hdev->name);
+		return -EFAULT;
+	}
+
+	skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
+				cmd_param, evt->evt, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s sending Intel patch command (0x%4.4x) failed (%ld)",
+		       hdev->name, cmd->opcode, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+
+	/* It ensures that the returned event matches the event data read from
+	 * the firmware file. At fist, it checks the length and then
+	 * the contents of the event.
+	 */
+	if (skb->len != evt->plen) {
+		BT_ERR("%s mismatch event length (opcode 0x%4.4x)", hdev->name,
+		       le16_to_cpu(cmd->opcode));
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+
+	if (memcmp(skb->data, evt_param, evt->plen)) {
+		BT_ERR("%s mismatch event parameter (opcode 0x%4.4x)",
+		       hdev->name, le16_to_cpu(cmd->opcode));
+		kfree_skb(skb);
+		return -EFAULT;
+	}
+	kfree_skb(skb);
+
+	return 0;
+}
+
+static int btusb_setup_intel(struct hci_dev *hdev)
+{
+	struct sk_buff *skb;
+	const struct firmware *fw;
+	const u8 *fw_ptr;
+	int disable_patch;
+	struct intel_version *ver;
+
+	const u8 mfg_enable[] = { 0x01, 0x00 };
+	const u8 mfg_disable[] = { 0x00, 0x00 };
+	const u8 mfg_reset_deactivate[] = { 0x00, 0x01 };
+	const u8 mfg_reset_activate[] = { 0x00, 0x02 };
+
+	BT_DBG("%s", hdev->name);
+
+	/* The controller has a bug with the first HCI command sent to it
+	 * returning number of completed commands as zero. This would stall the
+	 * command processing in the Bluetooth core.
+	 *
+	 * As a workaround, send HCI Reset command first which will reset the
+	 * number of completed commands and allow normal command processing
+	 * from now on.
+	 */
+	skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s sending initial HCI reset command failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	/* Read Intel specific controller version first to allow selection of
+	 * which firmware file to load.
+	 *
+	 * The returned information are hardware variant and revision plus
+	 * firmware variant, revision and build number.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s reading Intel fw version command failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+
+	if (skb->len != sizeof(*ver)) {
+		BT_ERR("%s Intel version event length mismatch", hdev->name);
+		kfree_skb(skb);
+		return -EIO;
+	}
+
+	ver = (struct intel_version *)skb->data;
+	if (ver->status) {
+		BT_ERR("%s Intel fw version event failed (%02x)", hdev->name,
+		       ver->status);
+		kfree_skb(skb);
+		return -bt_to_errno(ver->status);
+	}
+
+	BT_INFO("%s: read Intel version: %02x%02x%02x%02x%02x%02x%02x%02x%02x",
+		hdev->name, ver->hw_platform, ver->hw_variant,
+		ver->hw_revision, ver->fw_variant,  ver->fw_revision,
+		ver->fw_build_num, ver->fw_build_ww, ver->fw_build_yy,
+		ver->fw_patch_num);
+
+	/* fw_patch_num indicates the version of patch the device currently
+	 * have. If there is no patch data in the device, it is always 0x00.
+	 * So, if it is other than 0x00, no need to patch the deivce again.
+	 */
+	if (ver->fw_patch_num) {
+		BT_INFO("%s: Intel device is already patched. patch num: %02x",
+			hdev->name, ver->fw_patch_num);
+		kfree_skb(skb);
+		return 0;
+	}
+
+	/* Opens the firmware patch file based on the firmware version read
+	 * from the controller. If it fails to open the matching firmware
+	 * patch file, it tries to open the default firmware patch file.
+	 * If no patch file is found, allow the device to operate without
+	 * a patch.
+	 */
+	fw = btusb_setup_intel_get_fw(hdev, ver);
+	if (!fw) {
+		kfree_skb(skb);
+		return 0;
+	}
+	fw_ptr = fw->data;
+
+	/* This Intel specific command enables the manufacturer mode of the
+	 * controller.
+	 *
+	 * Only while this mode is enabled, the driver can download the
+	 * firmware patch data and configuration parameters.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc11, 2, mfg_enable, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s entering Intel manufacturer mode failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		release_firmware(fw);
+		return -PTR_ERR(skb);
+	}
+
+	if (skb->data[0]) {
+		u8 evt_status = skb->data[0];
+		BT_ERR("%s enable Intel manufacturer mode event failed (%02x)",
+		       hdev->name, evt_status);
+		kfree_skb(skb);
+		release_firmware(fw);
+		return -bt_to_errno(evt_status);
+	}
+	kfree_skb(skb);
+
+	disable_patch = 1;
+
+	/* The firmware data file consists of list of Intel specific HCI
+	 * commands and its expected events. The first byte indicates the
+	 * type of the message, either HCI command or HCI event.
+	 *
+	 * It reads the command and its expected event from the firmware file,
+	 * and send to the controller. Once __hci_cmd_sync_ev() returns,
+	 * the returned event is compared with the event read from the firmware
+	 * file and it will continue until all the messages are downloaded to
+	 * the controller.
+	 *
+	 * Once the firmware patching is completed successfully,
+	 * the manufacturer mode is disabled with reset and activating the
+	 * downloaded patch.
+	 *
+	 * If the firmware patching fails, the manufacturer mode is
+	 * disabled with reset and deactivating the patch.
+	 *
+	 * If the default patch file is used, no reset is done when disabling
+	 * the manufacturer.
+	 */
+	while (fw->size > fw_ptr - fw->data) {
+		int ret;
+
+		ret = btusb_setup_intel_patching(hdev, fw, &fw_ptr,
+						 &disable_patch);
+		if (ret < 0)
+			goto exit_mfg_deactivate;
+	}
+
+	release_firmware(fw);
+
+	if (disable_patch)
+		goto exit_mfg_disable;
+
+	/* Patching completed successfully and disable the manufacturer mode
+	 * with reset and activate the downloaded firmware patches.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_activate),
+			     mfg_reset_activate, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
+		hdev->name);
+
+	return 0;
+
+exit_mfg_disable:
+	/* Disable the manufacturer mode without reset */
+	skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_disable), mfg_disable,
+			     HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
+	return 0;
+
+exit_mfg_deactivate:
+	release_firmware(fw);
+
+	/* Patching failed. Disable the manufacturer mode with reset and
+	 * deactivate the downloaded firmware patches.
+	 */
+	skb = __hci_cmd_sync(hdev, 0xfc11, sizeof(mfg_reset_deactivate),
+			     mfg_reset_deactivate, HCI_INIT_TIMEOUT);
+	if (IS_ERR(skb)) {
+		BT_ERR("%s exiting Intel manufacturer mode failed (%ld)",
+		       hdev->name, PTR_ERR(skb));
+		return -PTR_ERR(skb);
+	}
+	kfree_skb(skb);
+
+	BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
+		hdev->name);
+
+	return 0;
+}
+
 static int btusb_probe(struct usb_interface *intf,
 				const struct usb_device_id *id)
 {
@@ -1018,11 +1413,17 @@ static int btusb_probe(struct usb_interface *intf,
 
 	SET_HCIDEV_DEV(hdev, &intf->dev);
 
-	hdev->open     = btusb_open;
-	hdev->close    = btusb_close;
-	hdev->flush    = btusb_flush;
-	hdev->send     = btusb_send_frame;
-	hdev->notify   = btusb_notify;
+	hdev->open   = btusb_open;
+	hdev->close  = btusb_close;
+	hdev->flush  = btusb_flush;
+	hdev->send   = btusb_send_frame;
+	hdev->notify = btusb_notify;
+
+	if (id->driver_info & BTUSB_BCM92035)
+		hdev->setup = btusb_setup_bcm92035;
+
+	if (id->driver_info & BTUSB_INTEL)
+		hdev->setup = btusb_setup_intel;
 
 	/* Interface numbers are hardcoded in the specification */
 	data->isoc = usb_ifnum_to_if(data->udev, 1);
@@ -1061,17 +1462,6 @@ static int btusb_probe(struct usb_interface *intf,
 		data->isoc = NULL;
 	}
 
-	if (id->driver_info & BTUSB_BCM92035) {
-		unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 };
-		struct sk_buff *skb;
-
-		skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
-		if (skb) {
-			memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
-			skb_queue_tail(&hdev->driver_init, skb);
-		}
-	}
-
 	if (data->isoc) {
 		err = usb_driver_claim_interface(&btusb_driver,
 							data->isoc, data);