summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/btusb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/bluetooth/btusb.c')
-rw-r--r--drivers/bluetooth/btusb.c222
1 files changed, 192 insertions, 30 deletions
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index a1c80b0c766..292c38e8aa1 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -30,9 +30,6 @@
#define VERSION "0.6"
-static bool ignore_dga;
-static bool ignore_csr;
-static bool ignore_sniffer;
static bool disable_scofix;
static bool force_scofix;
@@ -49,7 +46,9 @@ static struct usb_driver btusb_driver;
#define BTUSB_WRONG_SCO_MTU 0x40
#define BTUSB_ATH3012 0x80
#define BTUSB_INTEL 0x100
-#define BTUSB_BCM_PATCHRAM 0x200
+#define BTUSB_INTEL_BOOT 0x200
+#define BTUSB_BCM_PATCHRAM 0x400
+#define BTUSB_MARVELL 0x800
static const struct usb_device_id btusb_table[] = {
/* Generic Bluetooth USB device */
@@ -115,12 +114,19 @@ static const struct usb_device_id btusb_table[] = {
{ USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01),
.driver_info = BTUSB_BCM_PATCHRAM },
+ /* ASUSTek Computer - Broadcom based */
+ { USB_VENDOR_AND_INTERFACE_INFO(0x0b05, 0xff, 0x01, 0x01) },
+
/* Belkin F8065bf - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x050d, 0xff, 0x01, 0x01) },
/* IMC Networks - Broadcom based */
{ USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01) },
+ /* Intel Bluetooth USB Bootloader (RAM module) */
+ { USB_DEVICE(0x8087, 0x0a5a),
+ .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
+
{ } /* Terminating entry */
};
@@ -162,7 +168,6 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
- { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
@@ -176,6 +181,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3393), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -229,15 +235,21 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x08fd, 0x0002), .driver_info = BTUSB_IGNORE },
/* CSR BlueCore Bluetooth Sniffer */
- { USB_DEVICE(0x0a12, 0x0002), .driver_info = BTUSB_SNIFFER },
+ { USB_DEVICE(0x0a12, 0x0002),
+ .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
/* Frontline ComProbe Bluetooth Sniffer */
- { USB_DEVICE(0x16d3, 0x0002), .driver_info = BTUSB_SNIFFER },
+ { USB_DEVICE(0x16d3, 0x0002),
+ .driver_info = BTUSB_SNIFFER | BTUSB_BROKEN_ISOC },
/* Intel Bluetooth device */
{ USB_DEVICE(0x8087, 0x07dc), .driver_info = BTUSB_INTEL },
{ USB_DEVICE(0x8087, 0x0a2a), .driver_info = BTUSB_INTEL },
+ /* Marvell device */
+ { USB_DEVICE(0x1286, 0x2044), .driver_info = BTUSB_MARVELL },
+ { USB_DEVICE(0x1286, 0x2046), .driver_info = BTUSB_MARVELL },
+
{ } /* Terminating entry */
};
@@ -1183,6 +1195,51 @@ static int btusb_setup_intel_patching(struct hci_dev *hdev,
return 0;
}
+#define BDADDR_INTEL (&(bdaddr_t) {{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
+
+static int btusb_check_bdaddr_intel(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ struct hci_rp_read_bd_addr *rp;
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s reading Intel device address failed (%ld)",
+ hdev->name, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*rp)) {
+ BT_ERR("%s Intel device address length mismatch", hdev->name);
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ rp = (struct hci_rp_read_bd_addr *) skb->data;
+ if (rp->status) {
+ BT_ERR("%s Intel device address result failed (%02x)",
+ hdev->name, rp->status);
+ kfree_skb(skb);
+ return -bt_to_errno(rp->status);
+ }
+
+ /* For some Intel based controllers, the default Bluetooth device
+ * address 00:03:19:9E:8B:00 can be found. These controllers are
+ * fully operational, but have the danger of duplicate addresses
+ * and that in turn can cause problems with Bluetooth operation.
+ */
+ if (!bacmp(&rp->bdaddr, BDADDR_INTEL)) {
+ BT_ERR("%s found Intel default device address (%pMR)",
+ hdev->name, &rp->bdaddr);
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
static int btusb_setup_intel(struct hci_dev *hdev)
{
struct sk_buff *skb;
@@ -1255,6 +1312,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
BT_INFO("%s: Intel device is already patched. patch num: %02x",
hdev->name, ver->fw_patch_num);
kfree_skb(skb);
+ btusb_check_bdaddr_intel(hdev);
return 0;
}
@@ -1267,6 +1325,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
fw = btusb_setup_intel_get_fw(hdev, ver);
if (!fw) {
kfree_skb(skb);
+ btusb_check_bdaddr_intel(hdev);
return 0;
}
fw_ptr = fw->data;
@@ -1346,6 +1405,7 @@ static int btusb_setup_intel(struct hci_dev *hdev)
BT_INFO("%s: Intel Bluetooth firmware patch completed and activated",
hdev->name);
+ btusb_check_bdaddr_intel(hdev);
return 0;
exit_mfg_disable:
@@ -1360,6 +1420,8 @@ exit_mfg_disable:
kfree_skb(skb);
BT_INFO("%s: Intel Bluetooth firmware patch completed", hdev->name);
+
+ btusb_check_bdaddr_intel(hdev);
return 0;
exit_mfg_deactivate:
@@ -1380,9 +1442,52 @@ exit_mfg_deactivate:
BT_INFO("%s: Intel Bluetooth firmware patch completed and deactivated",
hdev->name);
+ btusb_check_bdaddr_intel(hdev);
+ return 0;
+}
+
+static int btusb_set_bdaddr_intel(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ long ret;
+
+ skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ ret = PTR_ERR(skb);
+ BT_ERR("%s: changing Intel device address failed (%ld)",
+ hdev->name, ret);
+ return ret;
+ }
+ kfree_skb(skb);
+
return 0;
}
+static int btusb_set_bdaddr_marvell(struct hci_dev *hdev,
+ const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ u8 buf[8];
+ long ret;
+
+ buf[0] = 0xfe;
+ buf[1] = sizeof(bdaddr_t);
+ memcpy(buf + 2, bdaddr, sizeof(bdaddr_t));
+
+ skb = __hci_cmd_sync(hdev, 0xfc22, sizeof(buf), buf, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ ret = PTR_ERR(skb);
+ BT_ERR("%s: changing Marvell device address failed (%ld)",
+ hdev->name, ret);
+ return ret;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+
+#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
+
static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
{
struct btusb_data *data = hci_get_drvdata(hdev);
@@ -1396,6 +1501,7 @@ static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
u16 opcode;
struct sk_buff *skb;
struct hci_rp_read_local_version *ver;
+ struct hci_rp_read_bd_addr *bda;
long ret;
snprintf(fw_name, sizeof(fw_name), "brcm/%s-%04x-%04x.hcd",
@@ -1405,8 +1511,7 @@ static int btusb_setup_bcm_patchram(struct hci_dev *hdev)
ret = request_firmware(&fw, fw_name, &hdev->dev);
if (ret < 0) {
- BT_INFO("%s: BCM: patch %s not found", hdev->name,
- fw_name);
+ BT_INFO("%s: BCM: patch %s not found", hdev->name, fw_name);
return 0;
}
@@ -1525,12 +1630,67 @@ reset_fw:
ver->lmp_ver, ver->lmp_subver);
kfree_skb(skb);
+ /* Read BD Address */
+ skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ ret = PTR_ERR(skb);
+ BT_ERR("%s: HCI_OP_READ_BD_ADDR failed (%ld)",
+ hdev->name, ret);
+ goto done;
+ }
+
+ if (skb->len != sizeof(*bda)) {
+ BT_ERR("%s: HCI_OP_READ_BD_ADDR event length mismatch",
+ hdev->name);
+ kfree_skb(skb);
+ ret = -EIO;
+ goto done;
+ }
+
+ bda = (struct hci_rp_read_bd_addr *) skb->data;
+ if (bda->status) {
+ BT_ERR("%s: HCI_OP_READ_BD_ADDR error status (%02x)",
+ hdev->name, bda->status);
+ kfree_skb(skb);
+ ret = -bt_to_errno(bda->status);
+ goto done;
+ }
+
+ /* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
+ * with no configured address.
+ */
+ if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) {
+ BT_INFO("%s: BCM: using default device address (%pMR)",
+ hdev->name, &bda->bdaddr);
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+
+ kfree_skb(skb);
+
done:
release_firmware(fw);
return ret;
}
+static int btusb_set_bdaddr_bcm(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ long ret;
+
+ skb = __hci_cmd_sync(hdev, 0xfc01, 6, bdaddr, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ ret = PTR_ERR(skb);
+ BT_ERR("%s: BCM: Change address command failed (%ld)",
+ hdev->name, ret);
+ return ret;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+
static int btusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
@@ -1555,15 +1715,6 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info == BTUSB_IGNORE)
return -ENODEV;
- if (ignore_dga && id->driver_info & BTUSB_DIGIANSWER)
- return -ENODEV;
-
- if (ignore_csr && id->driver_info & BTUSB_CSR)
- return -ENODEV;
-
- if (ignore_sniffer && id->driver_info & BTUSB_SNIFFER)
- return -ENODEV;
-
if (id->driver_info & BTUSB_ATH3012) {
struct usb_device *udev = interface_to_usbdev(intf);
@@ -1636,11 +1787,21 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_BCM92035)
hdev->setup = btusb_setup_bcm92035;
- if (id->driver_info & BTUSB_BCM_PATCHRAM)
+ if (id->driver_info & BTUSB_BCM_PATCHRAM) {
hdev->setup = btusb_setup_bcm_patchram;
+ hdev->set_bdaddr = btusb_set_bdaddr_bcm;
+ }
- if (id->driver_info & BTUSB_INTEL)
+ if (id->driver_info & BTUSB_INTEL) {
hdev->setup = btusb_setup_intel;
+ hdev->set_bdaddr = btusb_set_bdaddr_intel;
+ }
+
+ if (id->driver_info & BTUSB_MARVELL)
+ hdev->set_bdaddr = btusb_set_bdaddr_marvell;
+
+ if (id->driver_info & BTUSB_INTEL_BOOT)
+ set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
/* Interface numbers are hardcoded in the specification */
data->isoc = usb_ifnum_to_if(data->udev, 1);
@@ -1680,8 +1841,18 @@ static int btusb_probe(struct usb_interface *intf,
/* New sniffer firmware has crippled HCI interface */
if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x997)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+ }
- data->isoc = NULL;
+ if (id->driver_info & BTUSB_INTEL_BOOT) {
+ /* A bug in the bootloader causes that interrupt interface is
+ * only enabled after receiving SetInterface(0, AltSetting=0).
+ */
+ err = usb_set_interface(data->udev, 0, 0);
+ if (err < 0) {
+ BT_ERR("failed to set interface 0, alt 0 %d", err);
+ hci_free_dev(hdev);
+ return err;
+ }
}
if (data->isoc) {
@@ -1846,15 +2017,6 @@ static struct usb_driver btusb_driver = {
module_usb_driver(btusb_driver);
-module_param(ignore_dga, bool, 0644);
-MODULE_PARM_DESC(ignore_dga, "Ignore devices with id 08fd:0001");
-
-module_param(ignore_csr, bool, 0644);
-MODULE_PARM_DESC(ignore_csr, "Ignore devices with id 0a12:0001");
-
-module_param(ignore_sniffer, bool, 0644);
-MODULE_PARM_DESC(ignore_sniffer, "Ignore devices with id 0a12:0002");
-
module_param(disable_scofix, bool, 0644);
MODULE_PARM_DESC(disable_scofix, "Disable fixup of wrong SCO buffer size");
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-15 08:26:18 +0000