diff options
Diffstat (limited to 'drivers/char/agp/Kconfig')
| -rw-r--r-- | drivers/char/agp/Kconfig | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig new file mode 100644 index 00000000000..7f8c1b53b75 --- /dev/null +++ b/drivers/char/agp/Kconfig @@ -0,0 +1,171 @@ +config AGP + tristate "/dev/agpgart (AGP Support)" if !GART_IOMMU + depends on ALPHA || IA64 || PPC || X86 + default y if GART_IOMMU + ---help--- + AGP (Accelerated Graphics Port) is a bus system mainly used to + connect graphics cards to the rest of the system. + + If you have an AGP system and you say Y here, it will be possible to + use the AGP features of your 3D rendering video card. This code acts + as a sort of "AGP driver" for the motherboard's chipset. + + If you need more texture memory than you can get with the AGP GART + (theoretically up to 256 MB, but in practice usually 64 or 128 MB + due to kernel allocation issues), you could use PCI accesses + and have up to a couple gigs of texture space. + + Note that this is the only means to have XFree4/GLX use + write-combining with MTRR support on the AGP bus. Without it, OpenGL + direct rendering will be a lot slower but still faster than PIO. + + You should say Y here if you use XFree86 3.3.6 or 4.x and want to + use GLX or DRI. If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called agpgart. + +config AGP_ALI + tristate "ALI chipset support" + depends on AGP && X86 && !X86_64 + ---help--- + This option gives you AGP support for the GLX component of + XFree86 4.x on the following ALi chipsets. The supported chipsets + include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. + For the ALi-chipset question, ALi suggests you refer to + <http://www.ali.com.tw/eng/support/index.shtml>. + + The M1541 chipset can do AGP 1x and 2x, but note that there is an + acknowledged incompatibility with Matrox G200 cards. Due to + timing issues, this chipset cannot do AGP 2x with the G200. + This is a hardware limitation. AGP 1x seems to be fine, though. + + You should say Y here if you use XFree86 3.3.6 or 4.x and want to + use GLX or DRI. If unsure, say N. + +config AGP_ATI + tristate "ATI chipset support" + depends on AGP && X86 && !X86_64 + ---help--- + This option gives you AGP support for the GLX component of + XFree86 4.x on the ATI RadeonIGP family of chipsets. + + You should say Y here if you use XFree86 3.3.6 or 4.x and want to + use GLX or DRI. If unsure, say N. + +config AGP_AMD + tristate "AMD Irongate, 761, and 762 chipset support" + depends on AGP && X86 && !X86_64 + help + This option gives you AGP support for the GLX component of + XFree86 4.x on AMD Irongate, 761, and 762 chipsets. + + You should say Y here if you use XFree86 3.3.6 or 4.x and want to + use GLX or DRI. If unsure, say N. + +config AGP_AMD64 + tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU + depends on AGP && X86 + default y if GART_IOMMU + help + This option gives you AGP support for the GLX component of + XFree86 4.x using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs. + You still need an external AGP bridge like the AMD 8151, VIA + K8T400M, SiS755. It may also support other AGP bridges when loaded + with agp_try_unsupported=1. + You should say Y here if you use XFree86 3.3.6 or 4.x and want to + use GLX or DRI. If unsure, say Y + +config AGP_INTEL + tristate "Intel 440LX/BX/GX, I8xx and E7x05 chipset support" + depends on AGP && X86 + help + This option gives you AGP support for the GLX component of XFree86 4.x + on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850, 860, 875, + E7205 and E7505 chipsets and full support for the 810, 815, 830M, 845G, + 852GM, 855GM, 865G and I915 integrated graphics chipsets. + + You should say Y here if you use XFree86 3.3.6 or 4.x and want to + use GLX or DRI, or if you have any Intel integrated graphics + chipsets. If unsure, say Y. + +config AGP_NVIDIA + tristate "NVIDIA nForce/nForce2 chipset support" + depends on AGP && X86 && !X86_64 + help + This option gives you AGP support for the GLX component of + XFree86 4.x on the following NVIDIA chipsets. The supported chipsets + include nForce and nForce2 + +config AGP_SIS + tristate "SiS chipset support" + depends on AGP && X86 && !X86_64 + help + This option gives you AGP support for the GLX component of + XFree86 4.x on Silicon Integrated Systems [SiS] chipsets. + + Note that 5591/5592 AGP chipsets are NOT supported. + + You should say Y here if you use XFree86 3.3.6 or 4.x and want to + use GLX or DRI. If unsure, say N. + +config AGP_SWORKS + tristate "Serverworks LE/HE chipset support" + depends on AGP && X86 && !X86_64 + help + Say Y here to support the Serverworks AGP card. See + <http://www.serverworks.com/> for product descriptions and images. + +config AGP_VIA + tristate "VIA chipset support" + depends on AGP && X86 && !X86_64 + help + This option gives you AGP support for the GLX component of + XFree86 4.x on VIA MVP3/Apollo Pro chipsets. + + You should say Y here if you use XFree86 3.3.6 or 4.x and want to + use GLX or DRI. If unsure, say N. + +config AGP_I460 + tristate "Intel 460GX chipset support" + depends on AGP && (IA64_DIG || IA64_GENERIC) + help + This option gives you AGP GART support for the Intel 460GX chipset + for IA64 processors. + +config AGP_HP_ZX1 + tristate "HP ZX1 chipset AGP support" + depends on AGP && (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC) + help + This option gives you AGP GART support for the HP ZX1 chipset + for IA64 processors. + +config AGP_ALPHA_CORE + tristate "Alpha AGP support" + depends on AGP && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL) + default AGP + +config AGP_UNINORTH + tristate "Apple UniNorth & U3 AGP support" + depends on AGP && PPC_PMAC + help + This option gives you AGP support for Apple machines with a + UniNorth or U3 (Apple G5) bridge. + +config AGP_EFFICEON + tristate "Transmeta Efficeon support" + depends on AGP && X86 && !X86_64 + help + This option gives you AGP support for the Transmeta Efficeon + series processors with integrated northbridges. + + You should say Y here if you use XFree86 3.3.6 or 4.x and want to + use GLX or DRI. If unsure, say Y. + +config AGP_SGI_TIOCA + tristate "SGI TIO chipset AGP support" + depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC) + help + This option gives you AGP GART support for the SGI TIO chipset + for IA64 processors. + |