diff options
Diffstat (limited to 'drivers/char/ftape/lowlevel/ftape-init.c')
| -rw-r--r-- | drivers/char/ftape/lowlevel/ftape-init.c | 160 |
1 files changed, 0 insertions, 160 deletions
diff --git a/drivers/char/ftape/lowlevel/ftape-init.c b/drivers/char/ftape/lowlevel/ftape-init.c deleted file mode 100644 index 4998132a81d..00000000000 --- a/drivers/char/ftape/lowlevel/ftape-init.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - * Copyright (C) 1993-1996 Bas Laarhoven, - * (C) 1996-1997 Claus-Justus Heine. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; see the file COPYING. If not, write to - the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. - - * - * This file contains the code that interfaces the kernel - * for the QIC-40/80/3010/3020 floppy-tape driver for Linux. - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/major.h> - -#include <linux/ftape.h> -#include <linux/init.h> -#include <linux/qic117.h> -#ifdef CONFIG_ZFTAPE -#include <linux/zftape.h> -#endif - -#include "../lowlevel/ftape-init.h" -#include "../lowlevel/ftape-io.h" -#include "../lowlevel/ftape-read.h" -#include "../lowlevel/ftape-write.h" -#include "../lowlevel/ftape-ctl.h" -#include "../lowlevel/ftape-rw.h" -#include "../lowlevel/fdc-io.h" -#include "../lowlevel/ftape-buffer.h" -#include "../lowlevel/ftape-proc.h" -#include "../lowlevel/ftape-tracing.h" - - -#if defined(MODULE) && !defined(CONFIG_FT_NO_TRACE_AT_ALL) -static int ft_tracing = -1; -#endif - - -/* Called by modules package when installing the driver - * or by kernel during the initialization phase - */ -static int __init ftape_init(void) -{ - TRACE_FUN(ft_t_flow); - -#ifdef MODULE -#ifndef CONFIG_FT_NO_TRACE_AT_ALL - if (ft_tracing != -1) { - ftape_tracing = ft_tracing; - } -#endif - printk(KERN_INFO FTAPE_VERSION "\n"); - if (TRACE_LEVEL >= ft_t_info) { - printk( -KERN_INFO "(c) 1993-1996 Bas Laarhoven (bas@vimec.nl)\n" -KERN_INFO "(c) 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no)\n" -KERN_INFO "(c) 1996-1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)\n" -KERN_INFO "QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives\n"); - } -#else /* !MODULE */ - /* print a short no-nonsense boot message */ - printk(KERN_INFO FTAPE_VERSION "\n"); -#endif /* MODULE */ - TRACE(ft_t_info, "installing QIC-117 floppy tape hardware drive ... "); - TRACE(ft_t_info, "ftape_init @ 0x%p", ftape_init); - /* Allocate the DMA buffers. They are deallocated at cleanup() time. - */ -#ifdef TESTING -#ifdef MODULE - while (ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS) < 0) { - ftape_sleep(FT_SECOND/20); - if (signal_pending(current)) { - (void)ftape_set_nr_buffers(0); - TRACE(ft_t_bug, - "Killed by signal while allocating buffers."); - TRACE_ABORT(-EINTR, - ft_t_bug, "Free up memory and retry"); - } - } -#else - TRACE_CATCH(ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS), - (void)ftape_set_nr_buffers(0)); -#endif -#else - TRACE_CATCH(ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS), - (void)ftape_set_nr_buffers(0)); -#endif - ft_drive_sel = -1; - ft_failure = 1; /* inhibit any operation but open */ - ftape_udelay_calibrate(); /* must be before fdc_wait_calibrate ! */ - fdc_wait_calibrate(); -#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) - (void)ftape_proc_init(); -#endif -#ifdef CONFIG_ZFTAPE - (void)zft_init(); -#endif - TRACE_EXIT 0; -} - -module_param(ft_fdc_base, uint, 0); -MODULE_PARM_DESC(ft_fdc_base, "Base address of FDC controller."); -module_param(ft_fdc_irq, uint, 0); -MODULE_PARM_DESC(ft_fdc_irq, "IRQ (interrupt channel) to use."); -module_param(ft_fdc_dma, uint, 0); -MODULE_PARM_DESC(ft_fdc_dma, "DMA channel to use."); -module_param(ft_fdc_threshold, uint, 0); -MODULE_PARM_DESC(ft_fdc_threshold, "Threshold of the FDC Fifo."); -module_param(ft_fdc_rate_limit, uint, 0); -MODULE_PARM_DESC(ft_fdc_rate_limit, "Maximal data rate for FDC."); -module_param(ft_probe_fc10, bool, 0); -MODULE_PARM_DESC(ft_probe_fc10, - "If non-zero, probe for a Colorado FC-10/FC-20 controller."); -module_param(ft_mach2, bool, 0); -MODULE_PARM_DESC(ft_mach2, - "If non-zero, probe for a Mountain MACH-2 controller."); -#if defined(MODULE) && !defined(CONFIG_FT_NO_TRACE_AT_ALL) -module_param(ft_tracing, int, 0644); -MODULE_PARM_DESC(ft_tracing, - "Amount of debugging output, 0 <= tracing <= 8, default 3."); -#endif - -MODULE_AUTHOR( - "(c) 1993-1996 Bas Laarhoven (bas@vimec.nl), " - "(c) 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no), " - "(c) 1996, 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)"); -MODULE_DESCRIPTION( - "QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives."); -MODULE_LICENSE("GPL"); - -static void __exit ftape_exit(void) -{ - TRACE_FUN(ft_t_flow); - -#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) - ftape_proc_destroy(); -#endif - (void)ftape_set_nr_buffers(0); - printk(KERN_INFO "ftape: unloaded.\n"); - TRACE_EXIT; -} - -module_init(ftape_init); -module_exit(ftape_exit); |