diff options
Diffstat (limited to 'drivers/char/ftape/lowlevel/ftape-proc.c')
| -rw-r--r-- | drivers/char/ftape/lowlevel/ftape-proc.c | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/drivers/char/ftape/lowlevel/ftape-proc.c b/drivers/char/ftape/lowlevel/ftape-proc.c new file mode 100644 index 00000000000..c66251e997e --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-proc.c @@ -0,0 +1,215 @@ +/* + * Copyright (C) 1997 Claus-Justus Heine + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-proc.c,v $ + * $Revision: 1.11 $ + * $Date: 1997/10/24 14:47:37 $ + * + * This file contains the procfs interface for the + * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. + + * Old code removed, switched to dynamic proc entry. + */ + +#include <linux/config.h> + +#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) + +#include <linux/proc_fs.h> + +#include <linux/ftape.h> +#include <linux/init.h> +#include <linux/qic117.h> + +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-proc.h" +#include "../lowlevel/ftape-tracing.h" + +static size_t get_driver_info(char *buf) +{ + const char *debug_level[] = { "bugs" , + "errors", + "warnings", + "informational", + "noisy", + "program flow", + "fdc and dma", + "data flow", + "anything" }; + + return sprintf(buf, + "version : %s\n" + "used data rate: %d kbit/sec\n" + "dma memory : %d kb\n" + "debug messages: %s\n", + FTAPE_VERSION, + ft_data_rate, + FT_BUFF_SIZE * ft_nr_buffers >> 10, + debug_level[TRACE_LEVEL]); +} + +static size_t get_tapedrive_info(char *buf) +{ + return sprintf(buf, + "vendor id : 0x%04x\n" + "drive name: %s\n" + "wind speed: %d ips\n" + "wakeup : %s\n" + "max. rate : %d kbit/sec\n", + ft_drive_type.vendor_id, + ft_drive_type.name, + ft_drive_type.speed, + ((ft_drive_type.wake_up == no_wake_up) + ? "No wakeup needed" : + ((ft_drive_type.wake_up == wake_up_colorado) + ? "Colorado" : + ((ft_drive_type.wake_up == wake_up_mountain) + ? "Mountain" : + ((ft_drive_type.wake_up == wake_up_insight) + ? "Motor on" : + "Unknown")))), + ft_drive_max_rate); +} + +static size_t get_cartridge_info(char *buf) +{ + if (ftape_init_drive_needed) { + return sprintf(buf, "uninitialized\n"); + } + if (ft_no_tape) { + return sprintf(buf, "no cartridge inserted\n"); + } + return sprintf(buf, + "segments : %5d\n" + "tracks : %5d\n" + "length : %5dft\n" + "formatted : %3s\n" + "writable : %3s\n" + "QIC spec. : QIC-%s\n" + "fmt-code : %1d\n", + ft_segments_per_track, + ft_tracks_per_tape, + ftape_tape_len, + (ft_formatted == 1) ? "yes" : "no", + (ft_write_protected == 1) ? "no" : "yes", + ((ft_qic_std == QIC_TAPE_QIC40) ? "40" : + ((ft_qic_std == QIC_TAPE_QIC80) ? "80" : + ((ft_qic_std == QIC_TAPE_QIC3010) ? "3010" : + ((ft_qic_std == QIC_TAPE_QIC3020) ? "3020" : + "???")))), + ft_format_code); +} + +static size_t get_controller_info(char *buf) +{ + const char *fdc_name[] = { "no fdc", + "i8272", + "i82077", + "i82077AA", + "Colorado FC-10 or FC-20", + "i82078", + "i82078_1" }; + + return sprintf(buf, + "FDC type : %s\n" + "FDC base : 0x%03x\n" + "FDC irq : %d\n" + "FDC dma : %d\n" + "FDC thr. : %d\n" + "max. rate : %d kbit/sec\n", + ft_mach2 ? "Mountain MACH-2" : fdc_name[fdc.type], + fdc.sra, fdc.irq, fdc.dma, + ft_fdc_threshold, ft_fdc_max_rate); +} + +static size_t get_history_info(char *buf) +{ + size_t len; + + len = sprintf(buf, + "\nFDC isr statistics\n" + " id_am_errors : %3d\n" + " id_crc_errors : %3d\n" + " data_am_errors : %3d\n" + " data_crc_errors : %3d\n" + " overrun_errors : %3d\n" + " no_data_errors : %3d\n" + " retries : %3d\n", + ft_history.id_am_errors, ft_history.id_crc_errors, + ft_history.data_am_errors, ft_history.data_crc_errors, + ft_history.overrun_errors, ft_history.no_data_errors, + ft_history.retries); + len += sprintf(buf + len, + "\nECC statistics\n" + " crc_errors : %3d\n" + " crc_failures : %3d\n" + " ecc_failures : %3d\n" + " sectors corrected: %3d\n", + ft_history.crc_errors, ft_history.crc_failures, + ft_history.ecc_failures, ft_history.corrected); + len += sprintf(buf + len, + "\ntape quality statistics\n" + " media defects : %3d\n", + ft_history.defects); + len += sprintf(buf + len, + "\ntape motion statistics\n" + " repositions : %3d\n", + ft_history.rewinds); + return len; +} + +static int ftape_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *ptr = page; + size_t len; + + ptr += sprintf(ptr, "Kernel Driver\n\n"); + ptr += get_driver_info(ptr); + ptr += sprintf(ptr, "\nTape Drive\n\n"); + ptr += get_tapedrive_info(ptr); + ptr += sprintf(ptr, "\nFDC Controller\n\n"); + ptr += get_controller_info(ptr); + ptr += sprintf(ptr, "\nTape Cartridge\n\n"); + ptr += get_cartridge_info(ptr); + ptr += sprintf(ptr, "\nHistory Record\n\n"); + ptr += get_history_info(ptr); + + len = strlen(page); + *start = NULL; + if (off+count >= len) { + *eof = 1; + } else { + *eof = 0; + } + return len; +} + +int __init ftape_proc_init(void) +{ + return create_proc_read_entry("ftape", 0, &proc_root, + ftape_read_proc, NULL) != NULL; +} + +void ftape_proc_destroy(void) +{ + remove_proc_entry("ftape", &proc_root); +} + +#endif /* defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) */ |