diff options
Diffstat (limited to 'drivers/char/ip2/i2cmd.c')
| -rw-r--r-- | drivers/char/ip2/i2cmd.c | 210 |
1 files changed, 0 insertions, 210 deletions
diff --git a/drivers/char/ip2/i2cmd.c b/drivers/char/ip2/i2cmd.c deleted file mode 100644 index e7af647800b..00000000000 --- a/drivers/char/ip2/i2cmd.c +++ /dev/null @@ -1,210 +0,0 @@ -/******************************************************************************* -* -* (c) 1998 by Computone Corporation -* -******************************************************************************** -* -* -* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Definition table for In-line and Bypass commands. Applicable -* only when the standard loadware is active. (This is included -* source code, not a separate compilation module.) -* -*******************************************************************************/ - -//------------------------------------------------------------------------------ -// -// Revision History: -// -// 10 October 1991 MAG First Draft -// 7 November 1991 MAG Reflects additional commands. -// 24 February 1992 MAG Additional commands for 1.4.x loadware -// 11 March 1992 MAG Additional commands -// 30 March 1992 MAG Additional command: CMD_DSS_NOW -// 18 May 1992 MAG Discovered commands 39 & 40 must be at the end of a -// packet: affects implementation. -//------------------------------------------------------------------------------ - -//************ -//* Includes * -//************ - -#include "i2cmd.h" /* To get some bit-defines */ - -//------------------------------------------------------------------------------ -// Here is the table of global arrays which represent each type of command -// supported in the IntelliPort standard loadware. See also i2cmd.h -// for a more complete explanation of what is going on. -//------------------------------------------------------------------------------ - -// Here are the various globals: note that the names are not used except through -// the macros defined in i2cmd.h. Also note that although they are character -// arrays here (for extendability) they are cast to structure pointers in the -// i2cmd.h macros. See i2cmd.h for flags definitions. - -// Length Flags Command -static UCHAR ct02[] = { 1, BTH, 0x02 }; // DTR UP -static UCHAR ct03[] = { 1, BTH, 0x03 }; // DTR DN -static UCHAR ct04[] = { 1, BTH, 0x04 }; // RTS UP -static UCHAR ct05[] = { 1, BTH, 0x05 }; // RTS DN -static UCHAR ct06[] = { 1, BYP, 0x06 }; // START FL -static UCHAR ct07[] = { 2, BTH, 0x07,0 }; // BAUD -static UCHAR ct08[] = { 2, BTH, 0x08,0 }; // BITS -static UCHAR ct09[] = { 2, BTH, 0x09,0 }; // STOP -static UCHAR ct10[] = { 2, BTH, 0x0A,0 }; // PARITY -static UCHAR ct11[] = { 2, BTH, 0x0B,0 }; // XON -static UCHAR ct12[] = { 2, BTH, 0x0C,0 }; // XOFF -static UCHAR ct13[] = { 1, BTH, 0x0D }; // STOP FL -static UCHAR ct14[] = { 1, BYP|VIP, 0x0E }; // ACK HOTK -//static UCHAR ct15[]={ 2, BTH|VIP, 0x0F,0 }; // IRQ SET -static UCHAR ct16[] = { 2, INL, 0x10,0 }; // IXONOPTS -static UCHAR ct17[] = { 2, INL, 0x11,0 }; // OXONOPTS -static UCHAR ct18[] = { 1, INL, 0x12 }; // CTSENAB -static UCHAR ct19[] = { 1, BTH, 0x13 }; // CTSDSAB -static UCHAR ct20[] = { 1, INL, 0x14 }; // DCDENAB -static UCHAR ct21[] = { 1, BTH, 0x15 }; // DCDDSAB -static UCHAR ct22[] = { 1, BTH, 0x16 }; // DSRENAB -static UCHAR ct23[] = { 1, BTH, 0x17 }; // DSRDSAB -static UCHAR ct24[] = { 1, BTH, 0x18 }; // RIENAB -static UCHAR ct25[] = { 1, BTH, 0x19 }; // RIDSAB -static UCHAR ct26[] = { 2, BTH, 0x1A,0 }; // BRKENAB -static UCHAR ct27[] = { 1, BTH, 0x1B }; // BRKDSAB -//static UCHAR ct28[]={ 2, BTH, 0x1C,0 }; // MAXBLOKSIZE -//static UCHAR ct29[]={ 2, 0, 0x1D,0 }; // reserved -static UCHAR ct30[] = { 1, INL, 0x1E }; // CTSFLOWENAB -static UCHAR ct31[] = { 1, INL, 0x1F }; // CTSFLOWDSAB -static UCHAR ct32[] = { 1, INL, 0x20 }; // RTSFLOWENAB -static UCHAR ct33[] = { 1, INL, 0x21 }; // RTSFLOWDSAB -static UCHAR ct34[] = { 2, BTH, 0x22,0 }; // ISTRIPMODE -static UCHAR ct35[] = { 2, BTH|END, 0x23,0 }; // SENDBREAK -static UCHAR ct36[] = { 2, BTH, 0x24,0 }; // SETERRMODE -//static UCHAR ct36a[]={ 3, INL, 0x24,0,0 }; // SET_REPLACE - -// The following is listed for completeness, but should never be sent directly -// by user-level code. It is sent only by library routines in response to data -// movement. -//static UCHAR ct37[]={ 5, BYP|VIP, 0x25,0,0,0,0 }; // FLOW PACKET - -// Back to normal -//static UCHAR ct38[] = {11, BTH|VAR, 0x26,0,0,0,0,0,0,0,0,0,0 }; // DEF KEY SEQ -//static UCHAR ct39[]={ 3, BTH|END, 0x27,0,0 }; // OPOSTON -//static UCHAR ct40[]={ 1, BTH|END, 0x28 }; // OPOSTOFF -static UCHAR ct41[] = { 1, BYP, 0x29 }; // RESUME -//static UCHAR ct42[]={ 2, BTH, 0x2A,0 }; // TXBAUD -//static UCHAR ct43[]={ 2, BTH, 0x2B,0 }; // RXBAUD -//static UCHAR ct44[]={ 2, BTH, 0x2C,0 }; // MS PING -//static UCHAR ct45[]={ 1, BTH, 0x2D }; // HOTENAB -//static UCHAR ct46[]={ 1, BTH, 0x2E }; // HOTDSAB -//static UCHAR ct47[]={ 7, BTH, 0x2F,0,0,0,0,0,0 }; // UNIX FLAGS -//static UCHAR ct48[]={ 1, BTH, 0x30 }; // DSRFLOWENAB -//static UCHAR ct49[]={ 1, BTH, 0x31 }; // DSRFLOWDSAB -//static UCHAR ct50[]={ 1, BTH, 0x32 }; // DTRFLOWENAB -//static UCHAR ct51[]={ 1, BTH, 0x33 }; // DTRFLOWDSAB -//static UCHAR ct52[]={ 1, BTH, 0x34 }; // BAUDTABRESET -//static UCHAR ct53[] = { 3, BTH, 0x35,0,0 }; // BAUDREMAP -static UCHAR ct54[] = { 3, BTH, 0x36,0,0 }; // CUSTOMBAUD1 -static UCHAR ct55[] = { 3, BTH, 0x37,0,0 }; // CUSTOMBAUD2 -static UCHAR ct56[] = { 2, BTH|END, 0x38,0 }; // PAUSE -static UCHAR ct57[] = { 1, BYP, 0x39 }; // SUSPEND -static UCHAR ct58[] = { 1, BYP, 0x3A }; // UNSUSPEND -static UCHAR ct59[] = { 2, BTH, 0x3B,0 }; // PARITYCHK -static UCHAR ct60[] = { 1, INL|VIP, 0x3C }; // BOOKMARKREQ -//static UCHAR ct61[]={ 2, BTH, 0x3D,0 }; // INTERNALLOOP -//static UCHAR ct62[]={ 2, BTH, 0x3E,0 }; // HOTKTIMEOUT -static UCHAR ct63[] = { 2, INL, 0x3F,0 }; // SETTXON -static UCHAR ct64[] = { 2, INL, 0x40,0 }; // SETTXOFF -//static UCHAR ct65[]={ 2, BTH, 0x41,0 }; // SETAUTORTS -//static UCHAR ct66[]={ 2, BTH, 0x42,0 }; // SETHIGHWAT -//static UCHAR ct67[]={ 2, BYP, 0x43,0 }; // STARTSELFL -//static UCHAR ct68[]={ 2, INL, 0x44,0 }; // ENDSELFL -//static UCHAR ct69[]={ 1, BYP, 0x45 }; // HWFLOW_OFF -//static UCHAR ct70[]={ 1, BTH, 0x46 }; // ODSRFL_ENAB -//static UCHAR ct71[]={ 1, BTH, 0x47 }; // ODSRFL_DSAB -//static UCHAR ct72[]={ 1, BTH, 0x48 }; // ODCDFL_ENAB -//static UCHAR ct73[]={ 1, BTH, 0x49 }; // ODCDFL_DSAB -//static UCHAR ct74[]={ 2, BTH, 0x4A,0 }; // LOADLEVEL -//static UCHAR ct75[]={ 2, BTH, 0x4B,0 }; // STATDATA -//static UCHAR ct76[]={ 1, BYP, 0x4C }; // BREAK_ON -//static UCHAR ct77[]={ 1, BYP, 0x4D }; // BREAK_OFF -//static UCHAR ct78[]={ 1, BYP, 0x4E }; // GETFC -static UCHAR ct79[] = { 2, BYP, 0x4F,0 }; // XMIT_NOW -//static UCHAR ct80[]={ 4, BTH, 0x50,0,0,0 }; // DIVISOR_LATCH -//static UCHAR ct81[]={ 1, BYP, 0x51 }; // GET_STATUS -//static UCHAR ct82[]={ 1, BYP, 0x52 }; // GET_TXCNT -//static UCHAR ct83[]={ 1, BYP, 0x53 }; // GET_RXCNT -//static UCHAR ct84[]={ 1, BYP, 0x54 }; // GET_BOXIDS -//static UCHAR ct85[]={10, BYP, 0x55,0,0,0,0,0,0,0,0,0 }; // ENAB_MULT -//static UCHAR ct86[]={ 2, BTH, 0x56,0 }; // RCV_ENABLE -static UCHAR ct87[] = { 1, BYP, 0x57 }; // HW_TEST -//static UCHAR ct88[]={ 3, BTH, 0x58,0,0 }; // RCV_THRESHOLD -//static UCHAR ct90[]={ 3, BYP, 0x5A,0,0 }; // Set SILO -//static UCHAR ct91[]={ 2, BYP, 0x5B,0 }; // timed break - -// Some composite commands as well -//static UCHAR cc01[]={ 2, BTH, 0x02,0x04 }; // DTR & RTS UP -//static UCHAR cc02[]={ 2, BTH, 0x03,0x05 }; // DTR & RTS DN - -//******** -//* Code * -//******** - -//****************************************************************************** -// Function: i2cmdUnixFlags(iflag, cflag, lflag) -// Parameters: Unix tty flags -// -// Returns: Pointer to command structure -// -// Description: -// -// This routine sets the parameters of command 47 and returns a pointer to the -// appropriate structure. -//****************************************************************************** -#if 0 -cmdSyntaxPtr -i2cmdUnixFlags(unsigned short iflag,unsigned short cflag,unsigned short lflag) -{ - cmdSyntaxPtr pCM = (cmdSyntaxPtr) ct47; - - pCM->cmd[1] = (unsigned char) iflag; - pCM->cmd[2] = (unsigned char) (iflag >> 8); - pCM->cmd[3] = (unsigned char) cflag; - pCM->cmd[4] = (unsigned char) (cflag >> 8); - pCM->cmd[5] = (unsigned char) lflag; - pCM->cmd[6] = (unsigned char) (lflag >> 8); - return pCM; -} -#endif /* 0 */ - -//****************************************************************************** -// Function: i2cmdBaudDef(which, rate) -// Parameters: ? -// -// Returns: Pointer to command structure -// -// Description: -// -// This routine sets the parameters of commands 54 or 55 (according to the -// argument which), and returns a pointer to the appropriate structure. -//****************************************************************************** -static cmdSyntaxPtr -i2cmdBaudDef(int which, unsigned short rate) -{ - cmdSyntaxPtr pCM; - - switch(which) - { - case 1: - pCM = (cmdSyntaxPtr) ct54; - break; - default: - case 2: - pCM = (cmdSyntaxPtr) ct55; - break; - } - pCM->cmd[1] = (unsigned char) rate; - pCM->cmd[2] = (unsigned char) (rate >> 8); - return pCM; -} - |