summaryrefslogtreecommitdiffstats
path: root/drivers/char/mxser.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/mxser.c')
-rw-r--r--drivers/char/mxser.c111
1 files changed, 35 insertions, 76 deletions
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 5e28d39b9e8..9dac516df00 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -856,9 +856,9 @@ static void mxser_check_modem_status(struct tty_struct *tty,
}
}
-static int mxser_startup(struct tty_struct *tty)
+static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
{
- struct mxser_port *info = tty->driver_data;
+ struct mxser_port *info = container_of(port, struct mxser_port, port);
unsigned long page;
unsigned long flags;
@@ -868,22 +868,13 @@ static int mxser_startup(struct tty_struct *tty)
spin_lock_irqsave(&info->slock, flags);
- if (info->port.flags & ASYNC_INITIALIZED) {
- free_page(page);
- spin_unlock_irqrestore(&info->slock, flags);
- return 0;
- }
-
if (!info->ioaddr || !info->type) {
set_bit(TTY_IO_ERROR, &tty->flags);
free_page(page);
spin_unlock_irqrestore(&info->slock, flags);
return 0;
}
- if (info->port.xmit_buf)
- free_page(page);
- else
- info->port.xmit_buf = (unsigned char *) page;
+ info->port.xmit_buf = (unsigned char *) page;
/*
* Clear the FIFO buffers and disable them
@@ -951,24 +942,19 @@ static int mxser_startup(struct tty_struct *tty)
* and set the speed of the serial port
*/
mxser_change_speed(tty, NULL);
- info->port.flags |= ASYNC_INITIALIZED;
spin_unlock_irqrestore(&info->slock, flags);
return 0;
}
/*
- * This routine will shutdown a serial port; interrupts maybe disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
+ * This routine will shutdown a serial port
*/
-static void mxser_shutdown(struct tty_struct *tty)
+static void mxser_shutdown_port(struct tty_port *port)
{
- struct mxser_port *info = tty->driver_data;
+ struct mxser_port *info = container_of(port, struct mxser_port, port);
unsigned long flags;
- if (!(info->port.flags & ASYNC_INITIALIZED))
- return;
-
spin_lock_irqsave(&info->slock, flags);
/*
@@ -978,7 +964,7 @@ static void mxser_shutdown(struct tty_struct *tty)
wake_up_interruptible(&info->port.delta_msr_wait);
/*
- * Free the IRQ, if necessary
+ * Free the xmit buffer, if necessary
*/
if (info->port.xmit_buf) {
free_page((unsigned long) info->port.xmit_buf);
@@ -988,10 +974,6 @@ static void mxser_shutdown(struct tty_struct *tty)
info->IER = 0;
outb(0x00, info->ioaddr + UART_IER);
- if (tty->termios->c_cflag & HUPCL)
- info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS);
- outb(info->MCR, info->ioaddr + UART_MCR);
-
/* clear Rx/Tx FIFO's */
if (info->board->chip_flag)
outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
@@ -1004,9 +986,6 @@ static void mxser_shutdown(struct tty_struct *tty)
/* read data port to reset things */
(void) inb(info->ioaddr + UART_RX);
- set_bit(TTY_IO_ERROR, &tty->flags);
-
- info->port.flags &= ~ASYNC_INITIALIZED;
if (info->board->chip_flag)
SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr);
@@ -1023,8 +1002,7 @@ static void mxser_shutdown(struct tty_struct *tty)
static int mxser_open(struct tty_struct *tty, struct file *filp)
{
struct mxser_port *info;
- unsigned long flags;
- int retval, line;
+ int line;
line = tty->index;
if (line == MXSER_PORTS)
@@ -1035,23 +1013,7 @@ static int mxser_open(struct tty_struct *tty, struct file *filp)
if (!info->ioaddr)
return -ENODEV;
- tty->driver_data = info;
- tty_port_tty_set(&info->port, tty);
- /*
- * Start up serial port
- */
- spin_lock_irqsave(&info->port.lock, flags);
- info->port.count++;
- spin_unlock_irqrestore(&info->port.lock, flags);
- retval = mxser_startup(tty);
- if (retval)
- return retval;
-
- retval = tty_port_block_til_ready(&info->port, tty, filp);
- if (retval)
- return retval;
-
- return 0;
+ return tty_port_open(&info->port, tty, filp);
}
static void mxser_flush_buffer(struct tty_struct *tty)
@@ -1075,19 +1037,11 @@ static void mxser_flush_buffer(struct tty_struct *tty)
}
-static void mxser_close_port(struct tty_struct *tty, struct tty_port *port)
+static void mxser_close_port(struct tty_port *port)
{
struct mxser_port *info = container_of(port, struct mxser_port, port);
unsigned long timeout;
/*
- * Save the termios structure, since this port may have
- * separate termios for callout and dialin.
- *
- * FIXME: Can this go ?
- */
- if (port->flags & ASYNC_NORMAL_ACTIVE)
- info->normal_termios = *tty->termios;
- /*
* At this point we stop accepting input. To do this, we
* disable the receive line status interrupts, and tell the
* interrupt driver to stop checking the data ready bit in the
@@ -1097,22 +1051,18 @@ static void mxser_close_port(struct tty_struct *tty, struct tty_port *port)
if (info->board->chip_flag)
info->IER &= ~MOXA_MUST_RECV_ISR;
- if (port->flags & ASYNC_INITIALIZED) {
- outb(info->IER, info->ioaddr + UART_IER);
- /*
- * Before we drop DTR, make sure the UART transmitter
- * has completely drained; this is especially
- * important if there is a transmit FIFO!
- */
- timeout = jiffies + HZ;
- while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
- schedule_timeout_interruptible(5);
- if (time_after(jiffies, timeout))
- break;
- }
+ outb(info->IER, info->ioaddr + UART_IER);
+ /*
+ * Before we drop DTR, make sure the UART transmitter
+ * has completely drained; this is especially
+ * important if there is a transmit FIFO!
+ */
+ timeout = jiffies + HZ;
+ while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) {
+ schedule_timeout_interruptible(5);
+ if (time_after(jiffies, timeout))
+ break;
}
- mxser_shutdown(tty);
-
}
/*
@@ -1130,8 +1080,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
return;
if (tty_port_close_start(port, tty, filp) == 0)
return;
- mxser_close_port(tty, port);
+ mutex_lock(&port->mutex);
+ mxser_close_port(port);
mxser_flush_buffer(tty);
+ mxser_shutdown_port(port);
+ clear_bit(ASYNCB_INITIALIZED, &port->flags);
+ mutex_unlock(&port->mutex);
/* Right now the tty_port set is done outside of the close_end helper
as we don't yet have everyone using refcounts */
tty_port_close_end(port, tty);
@@ -1329,9 +1283,13 @@ static int mxser_set_serial_info(struct tty_struct *tty,
mxser_change_speed(tty, NULL);
spin_unlock_irqrestore(&info->slock, sl_flags);
}
- } else
- retval = mxser_startup(tty);
-
+ } else {
+ mutex_lock(&info->port.mutex);
+ retval = mxser_activate(&info->port, tty);
+ if (retval == 0)
+ set_bit(ASYNCB_INITIALIZED, &info->port.flags);
+ mutex_unlock(&info->port.mutex);
+ }
return retval;
}
@@ -2059,7 +2017,6 @@ static void mxser_hangup(struct tty_struct *tty)
struct mxser_port *info = tty->driver_data;
mxser_flush_buffer(tty);
- mxser_shutdown(tty);
tty_port_hangup(&info->port);
}
@@ -2363,6 +2320,8 @@ static const struct tty_operations mxser_ops = {
struct tty_port_operations mxser_port_ops = {
.carrier_raised = mxser_carrier_raised,
.dtr_rts = mxser_dtr_rts,
+ .activate = mxser_activate,
+ .shutdown = mxser_shutdown_port,
};
/*
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-28 10:52:31 +0000