diff options
Diffstat (limited to 'drivers/char/pc8736x_gpio.c')
| -rw-r--r-- | drivers/char/pc8736x_gpio.c | 58 |
1 files changed, 37 insertions, 21 deletions
diff --git a/drivers/char/pc8736x_gpio.c b/drivers/char/pc8736x_gpio.c index c860de6a6fd..84e5a68635f 100644 --- a/drivers/char/pc8736x_gpio.c +++ b/drivers/char/pc8736x_gpio.c @@ -3,18 +3,18 @@ National Semiconductor PC8736x GPIO driver. Allows a user space process to play with the GPIO pins. - Copyright (c) 2005 Jim Cromie <jim.cromie@gmail.com> + Copyright (c) 2005,2006 Jim Cromie <jim.cromie@gmail.com> adapted from linux/drivers/char/scx200_gpio.c Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>, */ -#include <linux/config.h> #include <linux/fs.h> #include <linux/module.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/cdev.h> #include <linux/io.h> #include <linux/ioport.h> #include <linux/mutex.h> @@ -25,7 +25,7 @@ #define DEVNAME "pc8736x_gpio" MODULE_AUTHOR("Jim Cromie <jim.cromie@gmail.com>"); -MODULE_DESCRIPTION("NatSemi PC-8736x GPIO Pin Driver"); +MODULE_DESCRIPTION("NatSemi/Winbond PC-8736x GPIO Pin Driver"); MODULE_LICENSE("GPL"); static int major; /* default to dynamic major */ @@ -38,14 +38,14 @@ static u8 pc8736x_gpio_shadow[4]; #define SIO_BASE1 0x2E /* 1st command-reg to check */ #define SIO_BASE2 0x4E /* alt command-reg to check */ -#define SIO_BASE_OFFSET 0x20 #define SIO_SID 0x20 /* SuperI/O ID Register */ #define SIO_SID_VALUE 0xe9 /* Expected value in SuperI/O ID Register */ #define SIO_CF1 0x21 /* chip config, bit0 is chip enable */ -#define PC8736X_GPIO_SIZE 16 +#define PC8736X_GPIO_RANGE 16 /* ioaddr range */ +#define PC8736X_GPIO_CT 32 /* minors matching 4 8 bit ports */ #define SIO_UNIT_SEL 0x7 /* unit select reg */ #define SIO_UNIT_ACT 0x30 /* unit enable */ @@ -212,14 +212,12 @@ static void pc8736x_gpio_change(unsigned index) pc8736x_gpio_set(index, !pc8736x_gpio_current(index)); } -static struct nsc_gpio_ops pc8736x_access = { +static struct nsc_gpio_ops pc8736x_gpio_ops = { .owner = THIS_MODULE, .gpio_config = pc8736x_gpio_configure, .gpio_dump = nsc_gpio_dump, .gpio_get = pc8736x_gpio_get, .gpio_set = pc8736x_gpio_set, - .gpio_set_high = pc8736x_gpio_set_high, - .gpio_set_low = pc8736x_gpio_set_low, .gpio_change = pc8736x_gpio_change, .gpio_current = pc8736x_gpio_current }; @@ -227,16 +225,16 @@ static struct nsc_gpio_ops pc8736x_access = { static int pc8736x_gpio_open(struct inode *inode, struct file *file) { unsigned m = iminor(inode); - file->private_data = &pc8736x_access; + file->private_data = &pc8736x_gpio_ops; dev_dbg(&pdev->dev, "open %d\n", m); - if (m > 63) + if (m >= PC8736X_GPIO_CT) return -EINVAL; return nonseekable_open(inode, file); } -static struct file_operations pc8736x_gpio_fops = { +static const struct file_operations pc8736x_gpio_fileops = { .owner = THIS_MODULE, .open = pc8736x_gpio_open, .write = nsc_gpio_write, @@ -255,9 +253,12 @@ static void __init pc8736x_init_shadow(void) } +static struct cdev pc8736x_gpio_cdev; + static int __init pc8736x_gpio_init(void) { - int rc = 0; + int rc; + dev_t devid; pdev = platform_device_alloc(DEVNAME, 0); if (!pdev) @@ -275,7 +276,7 @@ static int __init pc8736x_gpio_init(void) dev_err(&pdev->dev, "no device found\n"); goto undo_platform_dev_add; } - pc8736x_access.dev = &pdev->dev; + pc8736x_gpio_ops.dev = &pdev->dev; /* Verify that chip and it's GPIO unit are both enabled. My BIOS does this, so I take minimum action here @@ -297,7 +298,7 @@ static int __init pc8736x_gpio_init(void) pc8736x_gpio_base = (superio_inb(SIO_BASE_HADDR) << 8 | superio_inb(SIO_BASE_LADDR)); - if (!request_region(pc8736x_gpio_base, 16, DEVNAME)) { + if (!request_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE, DEVNAME)) { rc = -ENODEV; dev_err(&pdev->dev, "GPIO ioport %x busy\n", pc8736x_gpio_base); @@ -305,10 +306,17 @@ static int __init pc8736x_gpio_init(void) } dev_info(&pdev->dev, "GPIO ioport %x reserved\n", pc8736x_gpio_base); - rc = register_chrdev(major, DEVNAME, &pc8736x_gpio_fops); + if (major) { + devid = MKDEV(major, 0); + rc = register_chrdev_region(devid, PC8736X_GPIO_CT, DEVNAME); + } else { + rc = alloc_chrdev_region(&devid, 0, PC8736X_GPIO_CT, DEVNAME); + major = MAJOR(devid); + } + if (rc < 0) { dev_err(&pdev->dev, "register-chrdev failed: %d\n", rc); - goto undo_platform_dev_add; + goto undo_request_region; } if (!major) { major = rc; @@ -316,8 +324,15 @@ static int __init pc8736x_gpio_init(void) } pc8736x_init_shadow(); + + /* ignore minor errs, and succeed */ + cdev_init(&pc8736x_gpio_cdev, &pc8736x_gpio_fileops); + cdev_add(&pc8736x_gpio_cdev, devid, PC8736X_GPIO_CT); + return 0; +undo_request_region: + release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE); undo_platform_dev_add: platform_device_del(pdev); undo_platform_dev_alloc: @@ -328,14 +343,15 @@ undo_platform_dev_alloc: static void __exit pc8736x_gpio_cleanup(void) { - dev_dbg(&pdev->dev, " cleanup\n"); + dev_dbg(&pdev->dev, "cleanup\n"); - release_region(pc8736x_gpio_base, 16); + cdev_del(&pc8736x_gpio_cdev); + unregister_chrdev_region(MKDEV(major,0), PC8736X_GPIO_CT); + release_region(pc8736x_gpio_base, PC8736X_GPIO_RANGE); - unregister_chrdev(major, DEVNAME); + platform_device_del(pdev); + platform_device_put(pdev); } -EXPORT_SYMBOL(pc8736x_access); - module_init(pc8736x_gpio_init); module_exit(pc8736x_gpio_cleanup); |