diff options
Diffstat (limited to 'drivers/char/rio/rioinit.c')
| -rw-r--r-- | drivers/char/rio/rioinit.c | 1617 |
1 files changed, 1617 insertions, 0 deletions
diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c new file mode 100644 index 00000000000..dca941ed10c --- /dev/null +++ b/drivers/char/rio/rioinit.c @@ -0,0 +1,1617 @@ +/* +** ----------------------------------------------------------------------------- +** +** Perle Specialix driver for Linux +** Ported from existing RIO Driver for SCO sources. + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +** +** Module : rioinit.c +** SID : 1.3 +** Last Modified : 11/6/98 10:33:43 +** Retrieved : 11/6/98 10:33:49 +** +** ident @(#)rioinit.c 1.3 +** +** ----------------------------------------------------------------------------- +*/ +#ifdef SCCS_LABELS +static char *_rioinit_c_sccs_ = "@(#)rioinit.c 1.3"; +#endif + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/errno.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/string.h> +#include <asm/semaphore.h> +#include <asm/uaccess.h> + +#include <linux/termios.h> +#include <linux/serial.h> + +#include <linux/generic_serial.h> + + +#include "linux_compat.h" +#include "typdef.h" +#include "pkt.h" +#include "daemon.h" +#include "rio.h" +#include "riospace.h" +#include "top.h" +#include "cmdpkt.h" +#include "map.h" +#include "riotypes.h" +#include "rup.h" +#include "port.h" +#include "riodrvr.h" +#include "rioinfo.h" +#include "func.h" +#include "errors.h" +#include "pci.h" + +#include "parmmap.h" +#include "unixrup.h" +#include "board.h" +#include "host.h" +#include "error.h" +#include "phb.h" +#include "link.h" +#include "cmdblk.h" +#include "route.h" +#include "control.h" +#include "cirrus.h" +#include "rioioctl.h" +#include "rio_linux.h" + +#undef bcopy +#define bcopy rio_pcicopy + +int RIOPCIinit(struct rio_info *p, int Mode); + +#if 0 +static void RIOAllocateInterrupts(struct rio_info *); +static int RIOReport(struct rio_info *); +static void RIOStopInterrupts(struct rio_info *, int, int); +#endif + +static int RIOScrub(int, BYTE *, int); + +#if 0 +extern int rio_intr(); + +/* +** Init time code. +*/ +void +rioinit( p, info ) +struct rio_info * p; +struct RioHostInfo * info; +{ + /* + ** Multi-Host card support - taking the easy way out - sorry ! + ** We allocate and set up the Host and Port structs when the + ** driver is called to 'install' the first host. + ** We check for this first 'call' by testing the RIOPortp pointer. + */ + if ( !p->RIOPortp ) + { + rio_dprintk (RIO_DEBUG_INIT, "Allocating and setting up driver data structures\n"); + + RIOAllocDataStructs(p); /* allocate host/port structs */ + RIOSetupDataStructs(p); /* setup topology structs */ + } + + RIOInitHosts( p, info ); /* hunt down the hardware */ + + RIOAllocateInterrupts(p); /* allocate interrupts */ + RIOReport(p); /* show what we found */ +} + +/* +** Initialise the Cards +*/ +void +RIOInitHosts(p, info) +struct rio_info * p; +struct RioHostInfo * info; +{ +/* +** 15.10.1998 ARG - ESIL 0762 part fix +** If there is no ISA card definition - we always look for PCI cards. +** As we currently only support one host card this lets an ISA card +** definition take precedence over PLUG and PLAY. +** No ISA card - we are PLUG and PLAY with PCI. +*/ + + /* + ** Note - for PCI both these will be zero, that's okay because + ** RIOPCIInit() fills them in if a card is found. + */ + p->RIOHosts[p->RIONumHosts].Ivec = info->vector; + p->RIOHosts[p->RIONumHosts].PaddrP = info->location; + + /* + ** Check that we are able to accommodate another host + */ + if ( p->RIONumHosts >= RIO_HOSTS ) + { + p->RIOFailed++; + return; + } + + if ( info->bus & ISA_BUS ) + { + rio_dprintk (RIO_DEBUG_INIT, "initialising card %d (ISA)\n", p->RIONumHosts); + RIOISAinit(p, p->mode); + } + else + { + rio_dprintk (RIO_DEBUG_INIT, "initialising card %d (PCI)\n", p->RIONumHosts); + RIOPCIinit(p, RIO_PCI_DEFAULT_MODE); + } + + rio_dprintk (RIO_DEBUG_INIT, "Total hosts initialised so far : %d\n", p->RIONumHosts); + + +#ifdef FUTURE_RELEASE + if (p->bus & EISA_BUS) + /* EISA card */ + RIOEISAinit(p, RIO_EISA_DEFAULT_MODE); + + if (p->bus & MCA_BUS) + /* MCA card */ + RIOMCAinit(p, RIO_MCA_DEFAULT_MODE); +#endif +} + +/* +** go through memory for an AT host that we pass in the device info +** structure and initialise +*/ +void +RIOISAinit(p, mode) +struct rio_info * p; +int mode; +{ + + /* XXX Need to implement this. */ +#if 0 + p->intr_tid = iointset(p->RIOHosts[p->RIONumHosts].Ivec, + (int (*)())rio_intr, (char*)p->RIONumHosts); + + rio_dprintk (RIO_DEBUG_INIT, "Set interrupt handler, intr_tid = 0x%x\n", p->intr_tid ); + + if (RIODoAT(p, p->RIOHosts[p->RIONumHosts].PaddrP, mode)) { + return; + } + else { + rio_dprintk (RIO_DEBUG_INIT, "RIODoAT failed\n"); + p->RIOFailed++; + } +#endif + +} + +/* +** RIODoAT : +** +** Map in a boards physical address, check that the board is there, +** test the board and if everything is okay assign the board an entry +** in the Rio Hosts structure. +*/ +int +RIODoAT(p, Base, mode) +struct rio_info * p; +int Base; +int mode; +{ +#define FOUND 1 +#define NOT_FOUND 0 + + caddr_t cardAddr; + + /* + ** Check to see if we actually have a board at this physical address. + */ + if ((cardAddr = RIOCheckForATCard(Base)) != 0) { + /* + ** Now test the board to see if it is working. + */ + if (RIOBoardTest(Base, cardAddr, RIO_AT, 0) == RIO_SUCCESS) { + /* + ** Fill out a slot in the Rio host structure. + */ + if (RIOAssignAT(p, Base, cardAddr, mode)) { + return(FOUND); + } + } + RIOMapout(Base, RIO_AT_MEM_SIZE, cardAddr); + } + return(NOT_FOUND); +} + +caddr_t +RIOCheckForATCard(Base) +int Base; +{ + int off; + struct DpRam *cardp; /* (Points at the host) */ + caddr_t virtAddr; + unsigned char RIOSigTab[24]; +/* +** Table of values to search for as prom signature of a host card +*/ + strcpy(RIOSigTab, "JBJGPGGHINSMJPJR"); + + /* + ** Hey! Yes, You reading this code! Yo, grab a load a this: + ** + ** IF the card is using WORD MODE rather than BYTE MODE + ** then it will occupy 128K of PHYSICAL memory area. So, + ** you might think that the following Mapin is wrong. Well, + ** it isn't, because the SECOND 64K of occupied space is an + ** EXACT COPY of the FIRST 64K. (good?), so, we need only + ** map it in in one 64K block. + */ + if (RIOMapin(Base, RIO_AT_MEM_SIZE, &virtAddr) == -1) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Couldn't map the board in!\n"); + return((caddr_t)0); + } + + /* + ** virtAddr points to the DP ram of the system. + ** We now cast this to a pointer to a RIO Host, + ** and have a rummage about in the PROM. + */ + cardp = (struct DpRam *)virtAddr; + + for (off=0; RIOSigTab[off]; off++) { + if ((RBYTE(cardp->DpSignature[off]) & 0xFF) != RIOSigTab[off]) { + /* + ** Signature mismatch - card not at this address + */ + RIOMapout(Base, RIO_AT_MEM_SIZE, virtAddr); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Couldn't match the signature 0x%x 0x%x!\n", + (int)cardp, off); + return((caddr_t)0); + } + } + + /* + ** If we get here then we must have found a valid board so return + ** its virtual address. + */ + return(virtAddr); +} +#endif + +/** +** RIOAssignAT : +** +** Fill out the fields in the p->RIOHosts structure now we know we know +** we have a board present. +** +** bits < 0 indicates 8 bit operation requested, +** bits > 0 indicates 16 bit operation. +*/ +int +RIOAssignAT(p, Base, virtAddr, mode) +struct rio_info * p; +int Base; +caddr_t virtAddr; +int mode; +{ + int bits; + struct DpRam *cardp = (struct DpRam *)virtAddr; + + if ((Base < ONE_MEG) || (mode & BYTE_ACCESS_MODE)) + bits = BYTE_OPERATION; + else + bits = WORD_OPERATION; + + /* + ** Board has passed its scrub test. Fill in all the + ** transient stuff. + */ + p->RIOHosts[p->RIONumHosts].Caddr = virtAddr; + p->RIOHosts[p->RIONumHosts].CardP = (struct DpRam *)virtAddr; + + /* + ** Revision 01 AT host cards don't support WORD operations, + */ + if ( RBYTE(cardp->DpRevision) == 01 ) + bits = BYTE_OPERATION; + + p->RIOHosts[p->RIONumHosts].Type = RIO_AT; + p->RIOHosts[p->RIONumHosts].Copy = bcopy; + /* set this later */ + p->RIOHosts[p->RIONumHosts].Slot = -1; + p->RIOHosts[p->RIONumHosts].Mode = SLOW_LINKS | SLOW_AT_BUS | bits; + WBYTE(p->RIOHosts[p->RIONumHosts].Control, + BOOT_FROM_RAM | EXTERNAL_BUS_OFF | + p->RIOHosts[p->RIONumHosts].Mode | + INTERRUPT_DISABLE ); + WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt,0xff); + WBYTE(p->RIOHosts[p->RIONumHosts].Control, + BOOT_FROM_RAM | EXTERNAL_BUS_OFF | + p->RIOHosts[p->RIONumHosts].Mode | + INTERRUPT_DISABLE ); + WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt,0xff); + p->RIOHosts[p->RIONumHosts].UniqueNum = + ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)| + ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)| + ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)| + ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Uniquenum 0x%x\n",p->RIOHosts[p->RIONumHosts].UniqueNum); + + p->RIONumHosts++; + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Tests Passed at 0x%x\n", Base); + return(1); +} +#if 0 +#ifdef FUTURE_RELEASE +int RIOMCAinit(int Mode) +{ + uchar SlotNumber; + caddr_t Caddr; + uint Paddr; + uint Ivec; + int Handle; + int ret = 0; + + /* + ** Valid mode information for MCA cards + ** is only FAST LINKS + */ + Mode = (Mode & FAST_LINKS) ? McaTpFastLinks : McaTpSlowLinks; + rio_dprintk (RIO_DEBUG_INIT, "RIOMCAinit(%d)\n",Mode); + + + /* + ** Check out each of the slots + */ + for (SlotNumber = 0; SlotNumber < McaMaxSlots; SlotNumber++) { + /* + ** Enable the slot we want to talk to + */ + outb( McaSlotSelect, SlotNumber | McaSlotEnable ); + + /* + ** Read the ID word from the slot + */ + if (((inb(McaIdHigh)<< 8)|inb(McaIdLow)) == McaRIOId) + { + rio_dprintk (RIO_DEBUG_INIT, "Potential MCA card in slot %d\n", SlotNumber); + + /* + ** Card appears to be a RIO MCA card! + */ + RIOMachineType |= (1<<RIO_MCA); + + /* + ** Just check we haven't found too many wonderful objects + */ + if ( RIONumHosts >= RIO_HOSTS ) + { + Rprintf(RIOMesgTooManyCards); + return(ret); + } + + /* + ** McaIrqEnable contains the interrupt vector, and a card + ** enable bit. + */ + Ivec = inb(McaIrqEnable); + + rio_dprintk (RIO_DEBUG_INIT, "Ivec is %x\n", Ivec); + + switch ( Ivec & McaIrqMask ) + { + case McaIrq9: + rio_dprintk (RIO_DEBUG_INIT, "IRQ9\n"); + break; + case McaIrq3: + rio_dprintk (RIO_DEBUG_INIT, "IRQ3\n"); + break; + case McaIrq4: + rio_dprintk (RIO_DEBUG_INIT, "IRQ4\n"); + break; + case McaIrq7: + rio_dprintk (RIO_DEBUG_INIT, "IRQ7\n"); + break; + case McaIrq10: + rio_dprintk (RIO_DEBUG_INIT, "IRQ10\n"); + break; + case McaIrq11: + rio_dprintk (RIO_DEBUG_INIT, "IRQ11\n"); + break; + case McaIrq12: + rio_dprintk (RIO_DEBUG_INIT, "IRQ12\n"); + break; + case McaIrq15: + rio_dprintk (RIO_DEBUG_INIT, "IRQ15\n"); + break; + } + + /* + ** If the card enable bit isn't set, then set it! + */ + if ((Ivec & McaCardEnable) != McaCardEnable) { + rio_dprintk (RIO_DEBUG_INIT, "McaCardEnable not set - setting!\n"); + outb(McaIrqEnable,Ivec|McaCardEnable); + } else + rio_dprintk (RIO_DEBUG_INIT, "McaCardEnable already set\n"); + + /* + ** Convert the IRQ enable mask into something useful + */ + Ivec = RIOMcaToIvec[Ivec & McaIrqMask]; + + /* + ** Find the physical address + */ + rio_dprintk (RIO_DEBUG_INIT, "inb(McaMemory) is %x\n", inb(McaMemory)); + Paddr = McaAddress(inb(McaMemory)); + + rio_dprintk (RIO_DEBUG_INIT, "MCA card has Ivec %d Addr %x\n", Ivec, Paddr); + + if ( Paddr != 0 ) + { + + /* + ** Tell the memory mapper that we want to talk to it + */ + Handle = RIOMapin( Paddr, RIO_MCA_MEM_SIZE, &Caddr ); + + if ( Handle == -1 ) { + rio_dprintk (RIO_DEBUG_INIT, "Couldn't map %d bytes at %x\n", RIO_MCA_MEM_SIZE, Paddr; + continue; + } + + rio_dprintk (RIO_DEBUG_INIT, "Board mapped to vaddr 0x%x\n", Caddr); + + /* + ** And check that it is actually there! + */ + if ( RIOBoardTest( Paddr,Caddr,RIO_MCA,SlotNumber ) == RIO_SUCCESS ) + { + rio_dprintk (RIO_DEBUG_INIT, "Board has passed test\n"); + rio_dprintk (RIO_DEBUG_INIT, "Slot %d. Type %d. Paddr 0x%x. Caddr 0x%x. Mode 0x%x.\n", + SlotNumber, RIO_MCA, Paddr, Caddr, Mode); + + /* + ** Board has passed its scrub test. Fill in all the + ** transient stuff. + */ + p->RIOHosts[RIONumHosts].Slot = SlotNumber; + p->RIOHosts[RIONumHosts].Ivec = Ivec; + p->RIOHosts[RIONumHosts].Type = RIO_MCA; + p->RIOHosts[RIONumHosts].Copy = bcopy; + p->RIOHosts[RIONumHosts].PaddrP = Paddr; + p->RIOHosts[RIONumHosts].Caddr = Caddr; + p->RIOHosts[RIONumHosts].CardP = (struct DpRam *)Caddr; + p->RIOHosts[RIONumHosts].Mode = Mode; + WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt , 0xff); + p->RIOHosts[RIONumHosts].UniqueNum = + ((RBYTE(p->RIOHosts[RIONumHosts].Unique[0])&0xFF)<<0)| + ((RBYTE(p->RIOHosts[RIONumHosts].Unique[1])&0xFF)<<8)| + ((RBYTE(p->RIOHosts[RIONumHosts].Unique[2])&0xFF)<<16)| + ((RBYTE(p->RIOHosts[RIONumHosts].Unique[3])&0xFF)<<24); + RIONumHosts++; + ret++; + } + else + { + /* + ** It failed the test, so ignore it. + */ + rio_dprintk (RIO_DEBUG_INIT, "TEST FAILED\n"); + RIOMapout(Paddr, RIO_MCA_MEM_SIZE, Caddr ); + } + } + else + { + rio_dprintk (RIO_DEBUG_INIT, "Slot %d - Paddr zero!\n", SlotNumber); + } + } + else + { + rio_dprintk (RIO_DEBUG_INIT, "Slot %d NOT RIO\n", SlotNumber); + } + } + /* + ** Now we have checked all the slots, turn off the MCA slot selector + */ + outb(McaSlotSelect,0); + rio_dprintk (RIO_DEBUG_INIT, "Slot %d NOT RIO\n", SlotNumber); + return ret; +} + +int RIOEISAinit( int Mode ) +{ + static int EISADone = 0; + uint Paddr; + int PollIntMixMsgDone = 0; + caddr_t Caddr; + ushort Ident; + uchar EisaSlot; + uchar Ivec; + int ret = 0; + + /* + ** The only valid mode information for EISA hosts is fast or slow + ** links. + */ + Mode = (Mode & FAST_LINKS) ? EISA_TP_FAST_LINKS : EISA_TP_SLOW_LINKS; + + if ( EISADone ) + { + rio_dprintk (RIO_DEBUG_INIT, "RIOEISAinit() - already done, return.\n"); + return(0); + } + + EISADone++; + + rio_dprintk (RIO_DEBUG_INIT, "RIOEISAinit()\n"); + + + /* + ** First check all cards to see if ANY are set for polled mode operation. + ** If so, set ALL to polled. + */ + + for ( EisaSlot=1; EisaSlot<=RIO_MAX_EISA_SLOTS; EisaSlot++ ) + { + Ident = (INBZ(EisaSlot,EISA_PRODUCT_IDENT_HI)<<8) | + INBZ(EisaSlot,EISA_PRODUCT_IDENT_LO); + + if ( Ident == RIO_EISA_IDENT ) + { + rio_dprintk (RIO_DEBUG_INIT, "Found Specialix product\n"); + + if ( INBZ(EisaSlot,EISA_PRODUCT_NUMBER) != RIO_EISA_PRODUCT_CODE ) + { + rio_dprintk (RIO_DEBUG_INIT, "Not Specialix RIO - Product number %x\n", + INBZ(EisaSlot, EISA_PRODUCT_NUMBER)); + continue; /* next slot */ + } + /* + ** Its a Specialix RIO! + */ + rio_dprintk (RIO_DEBUG_INIT, "RIO Revision %d\n", + INBZ(EisaSlot, EISA_REVISION_NUMBER)); + + RIOMachineType |= (1<<RIO_EISA); + + /* + ** Just check we haven't found too many wonderful objects + */ + if ( RIONumHosts >= RIO_HOSTS ) + { + Rprintf(RIOMesgTooManyCards); + return 0; + } + + /* + ** Ensure that the enable bit is set! + */ + OUTBZ( EisaSlot, EISA_ENABLE, RIO_EISA_ENABLE_BIT ); + + /* + ** EISA_INTERRUPT_VEC contains the interrupt vector. + */ + Ivec = INBZ(EisaSlot,EISA_INTERRUPT_VEC); + +#ifdef RIODEBUG + switch ( Ivec & EISA_INTERRUPT_MASK ) + { + case EISA_IRQ_3: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 3\n"); + break; + case EISA_IRQ_4: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 4\n"); + break; + case EISA_IRQ_5: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 5\n"); + break; + case EISA_IRQ_6: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 6\n"); + break; + case EISA_IRQ_7: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 7\n"); + break; + case EISA_IRQ_9: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 9\n"); + break; + case EISA_IRQ_10: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 10\n"); + break; + case EISA_IRQ_11: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 11\n"); + break; + case EISA_IRQ_12: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 12\n"); + break; + case EISA_IRQ_14: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 14\n"); + break; + case EISA_IRQ_15: + rio_dprintk (RIO_DEBUG_INIT, "EISA IRQ 15\n"); + break; + case EISA_POLLED: + rio_dprintk (RIO_DEBUG_INIT, "EISA POLLED\n"); + break; + default: + rio_dprintk (RIO_DEBUG_INIT, NULL,DBG_INIT|DBG_FAIL,"Shagged interrupt number!\n"); + Ivec &= EISA_CONTROL_MASK; + } +#endif + + if ( (Ivec & EISA_INTERRUPT_MASK) == + EISA_POLLED ) + { + RIOWillPoll = 1; + break; /* From EisaSlot loop */ + } + } + } + + /* + ** Do it all again now we know whether to change all cards to polled + ** mode or not + */ + + for ( EisaSlot=1; EisaSlot<=RIO_MAX_EISA_SLOTS; EisaSlot++ ) + { + Ident = (INBZ(EisaSlot,EISA_PRODUCT_IDENT_HI)<<8) | + INBZ(EisaSlot,EISA_PRODUCT_IDENT_LO); + + if ( Ident == RIO_EISA_IDENT ) + { + if ( INBZ(EisaSlot,EISA_PRODUCT_NUMBER) != RIO_EISA_PRODUCT_CODE ) + continue; /* next slot */ + + /* + ** Its a Specialix RIO! + */ + + /* + ** Ensure that the enable bit is set! + */ + OUTBZ( EisaSlot, EISA_ENABLE, RIO_EISA_ENABLE_BIT ); + + /* + ** EISA_INTERRUPT_VEC contains the interrupt vector. + */ + Ivec = INBZ(EisaSlot,EISA_INTERRUPT_VEC); + + if ( RIOWillPoll ) + { + /* + ** If we are going to operate in polled mode, but this + ** board is configured to be interrupt driven, display + ** the message explaining the situation to the punter, + ** assuming we haven't already done so. + */ + + if ( !PollIntMixMsgDone && + (Ivec & EISA_INTERRUPT_MASK) != EISA_POLLED ) + { + Rprintf(RIOMesgAllPolled); + PollIntMixMsgDone = 1; + } + + /* + ** Ungraciously ignore whatever the board reports as its + ** interrupt vector... + */ + + Ivec &= ~EISA_INTERRUPT_MASK; + + /* + ** ...and force it to dance to the poll tune. + */ + + Ivec |= EISA_POLLED; + } + + /* + ** Convert the IRQ enable mask into something useful (0-15) + */ + Ivec = RIOEisaToIvec(Ivec); + + rio_dprintk (RIO_DEBUG_INIT, "EISA host in slot %d has Ivec 0x%x\n", + EisaSlot, Ivec); + + /* + ** Find the physical address + */ + Paddr = (INBZ(EisaSlot,EISA_MEMORY_BASE_HI)<<24) | + (INBZ(EisaSlot,EISA_MEMORY_BASE_LO)<<16); + + rio_dprintk (RIO_DEBUG_INIT, "EISA card has Ivec %d Addr %x\n", Ivec, Paddr); + + if ( Paddr == 0 ) + { + rio_dprintk (RIO_DEBUG_INIT, + "Board in slot %d configured for address zero!\n", EisaSlot); + continue; + } + + /* + ** Tell the memory mapper that we want to talk to it + */ + rio_dprintk (RIO_DEBUG_INIT, "About to map EISA card \n"); + + if (RIOMapin( Paddr, RIO_EISA_MEM_SIZE, &Caddr) == -1) { + rio_dprintk (RIO_DEBUG_INIT, "Couldn't map %d bytes at %x\n", + RIO_EISA_MEM_SIZE,Paddr); + continue; + } + + rio_dprintk (RIO_DEBUG_INIT, "Board mapped to vaddr 0x%x\n", Caddr); + + /* + ** And check that it is actually there! + */ + if ( RIOBoardTest( Paddr,Caddr,RIO_EISA,EisaSlot) == RIO_SUCCESS ) + { + rio_dprintk (RIO_DEBUG_INIT, "Board has passed test\n"); + rio_dprintk (RIO_DEBUG_INIT, + "Slot %d. Ivec %d. Type %d. Paddr 0x%x. Caddr 0x%x. Mode 0x%x.\n", + EisaSlot,Ivec,RIO_EISA,Paddr,Caddr,Mode); + + /* + ** Board has passed its scrub test. Fill in all the + ** transient stuff. + */ + p->RIOHosts[RIONumHosts].Slot = EisaSlot; + p->RIOHosts[RIONumHosts].Ivec = Ivec; + p->RIOHosts[RIONumHosts].Type = RIO_EISA; + p->RIOHosts[RIONumHosts].Copy = bcopy; + p->RIOHosts[RIONumHosts].PaddrP = Paddr; + p->RIOHosts[RIONumHosts].Caddr = Caddr; + p->RIOHosts[RIONumHosts].CardP = (struct DpRam *)Caddr; + p->RIOHosts[RIONumHosts].Mode = Mode; + /* + ** because the EISA prom is mapped into IO space, we + ** need to copy the unqiue number into the memory area + ** that it would have occupied, so that the download + ** code can determine its ID and card type. + */ + WBYTE(p->RIOHosts[RIONumHosts].Unique[0],INBZ(EisaSlot,EISA_UNIQUE_NUM_0)); + WBYTE(p->RIOHosts[RIONumHosts].Unique[1],INBZ(EisaSlot,EISA_UNIQUE_NUM_1)); + WBYTE(p->RIOHosts[RIONumHosts].Unique[2],INBZ(EisaSlot,EISA_UNIQUE_NUM_2)); + WBYTE(p->RIOHosts[RIONumHosts].Unique[3],INBZ(EisaSlot,EISA_UNIQUE_NUM_3)); + p->RIOHosts[RIONumHosts].UniqueNum = + ((RBYTE(p->RIOHosts[RIONumHosts].Unique[0])&0xFF)<<0)| + ((RBYTE(p->RIOHosts[RIONumHosts].Unique[1])&0xFF)<<8)| + ((RBYTE(p->RIOHosts[RIONumHosts].Unique[2])&0xFF)<<16)| + ((RBYTE(p->RIOHosts[RIONumHosts].Unique[3])&0xFF)<<24); + INBZ(EisaSlot,EISA_INTERRUPT_RESET); + RIONumHosts++; + ret++; + } + else + { + /* + ** It failed the test, so ignore it. + */ + rio_dprintk (RIO_DEBUG_INIT, "TEST FAILED\n"); + + RIOMapout(Paddr, RIO_EISA_MEM_SIZE, Caddr ); + } + } + } + if (RIOMachineType & RIO_EISA) + return ret+1; + return ret; +} +#endif + + +#ifndef linux + +#define CONFIG_ADDRESS 0xcf8 +#define CONFIG_DATA 0xcfc +#define FORWARD_REG 0xcfa + + +static int +read_config(int bus_number, int device_num, int r_number) +{ + unsigned int cav; + unsigned int val; + +/* + Build config_address_value: + + 31 24 23 16 15 11 10 8 7 0 + ------------------------------------------------------ + |1| 0000000 | bus_number | device # | 000 | register | + ------------------------------------------------------ +*/ + + cav = r_number & 0xff; + cav |= ((device_num & 0x1f) << 11); + cav |= ((bus_number & 0xff) << 16); + cav |= 0x80000000; /* Enable bit */ + outpd(CONFIG_ADDRESS,cav); + val = inpd(CONFIG_DATA); + outpd(CONFIG_ADDRESS,0); + return val; +} + +static +write_config(bus_number,device_num,r_number,val) +{ + unsigned int cav; + +/* + Build config_address_value: + + 31 24 23 16 15 11 10 8 7 0 + ------------------------------------------------------ + |1| 0000000 | bus_number | device # | 000 | register | + ------------------------------------------------------ +*/ + + cav = r_number & 0xff; + cav |= ((device_num & 0x1f) << 11); + cav |= ((bus_number & 0xff) << 16); + cav |= 0x80000000; /* Enable bit */ + outpd(CONFIG_ADDRESS, cav); + outpd(CONFIG_DATA, val); + outpd(CONFIG_ADDRESS, 0); + return val; +} +#else +/* XXX Implement these... */ +static int +read_config(int bus_number, int device_num, int r_number) +{ + return 0; +} + +static int +write_config(int bus_number, int device_num, int r_number) +{ + return 0; +} + +#endif + +int +RIOPCIinit(p, Mode) +struct rio_info *p; +int Mode; +{ + #define MAX_PCI_SLOT 32 + #define RIO_PCI_JET_CARD 0x200011CB + + static int slot; /* count of machine's PCI slots searched so far */ + caddr_t Caddr; /* Virtual address of the current PCI host card. */ + unsigned char Ivec; /* interrupt vector for the current PCI host */ + unsigned long Paddr; /* Physical address for the current PCI host */ + int Handle; /* Handle to Virtual memory allocated for current PCI host */ + + + rio_dprintk (RIO_DEBUG_INIT, "Search for a RIO PCI card - start at slot %d\n", slot); + + /* + ** Initialise the search status + */ + p->RIOLastPCISearch = RIO_FAIL; + + while ( (slot < MAX_PCI_SLOT) & (p->RIOLastPCISearch != RIO_SUCCESS) ) + { + rio_dprintk (RIO_DEBUG_INIT, "Currently testing slot %d\n", slot); + + if (read_config(0,slot,0) == RIO_PCI_JET_CARD) { + p->RIOHosts[p->RIONumHosts].Ivec = 0; + Paddr = read_config(0,slot,0x18); + Paddr = Paddr - (Paddr & 0x1); /* Mask off the io bit */ + + if ( (Paddr == 0) || ((Paddr & 0xffff0000) == 0xffff0000) ) { + rio_dprintk (RIO_DEBUG_INIT, "Goofed up slot\n"); /* what! */ + slot++; + continue; + } + + p->RIOHosts[p->RIONumHosts].PaddrP = Paddr; + Ivec = (read_config(0,slot,0x3c) & 0xff); + + rio_dprintk (RIO_DEBUG_INIT, "PCI Host at 0x%x, Intr %d\n", (int)Paddr, Ivec); + + Handle = RIOMapin( Paddr, RIO_PCI_MEM_SIZE, &Caddr ); + if (Handle == -1) { + rio_dprintk (RIO_DEBUG_INIT, "Couldn't map %d bytes at 0x%x\n", RIO_PCI_MEM_SIZE, (int)Paddr); + slot++; + continue; + } + p->RIOHosts[p->RIONumHosts].Ivec = Ivec + 32; + p->intr_tid = iointset(p->RIOHosts[p->RIONumHosts].Ivec, + (int (*)())rio_intr, (char *)p->RIONumHosts); + if (RIOBoardTest( Paddr, Caddr, RIO_PCI, 0 ) == RIO_SUCCESS) { + rio_dprintk (RIO_DEBUG_INIT, ("Board has passed test\n"); + rio_dprintk (RIO_DEBUG_INIT, ("Paddr 0x%x. Caddr 0x%x. Mode 0x%x.\n", Paddr, Caddr, Mode); + + /* + ** Board has passed its scrub test. Fill in all the + ** transient stuff. + */ + p->RIOHosts[p->RIONumHosts].Slot = 0; + p->RIOHosts[p->RIONumHosts].Ivec = Ivec + 32; + p->RIOHosts[p->RIONumHosts].Type = RIO_PCI; + p->RIOHosts[p->RIONumHosts].Copy = rio_pcicopy; + p->RIOHosts[p->RIONumHosts].PaddrP = Paddr; + p->RIOHosts[p->RIONumHosts].Caddr = Caddr; + p->RIOHosts[p->RIONumHosts].CardP = (struct DpRam *)Caddr; + p->RIOHosts[p->RIONumHosts].Mode = Mode; + +#if 0 + WBYTE(p->RIOHosts[p->RIONumHosts].Control, + BOOT_FROM_RAM | EXTERNAL_BUS_OFF | + p->RIOHosts[p->RIONumHosts].Mode | + INTERRUPT_DISABLE ); + WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt,0xff); + WBYTE(p->RIOHosts[p->RIONumHosts].Control, + BOOT_FROM_RAM | EXTERNAL_BUS_OFF | + p->RIOHosts[p->RIONumHosts].Mode | + INTERRUPT_DISABLE ); + WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt,0xff); +#else + WBYTE(p->RIOHosts[p->RIONumHosts].ResetInt, 0xff); +#endif + p->RIOHosts[p->RIONumHosts].UniqueNum = + ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[0])&0xFF)<<0)| + ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[1])&0xFF)<<8)| + ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[2])&0xFF)<<16)| + ((RBYTE(p->RIOHosts[p->RIONumHosts].Unique[3])&0xFF)<<24); + + rio_dprintk (RIO_DEBUG_INIT, "Unique no 0x%x.\n", + p->RIOHosts[p->RIONumHosts].UniqueNum); + + p->RIOLastPCISearch = RIO_SUCCESS; + p->RIONumHosts++; + } + } + slot++; + } + + if ( slot >= MAX_PCI_SLOT ) { + rio_dprintk (RIO_DEBUG_INIT, "All %d PCI slots have tested for RIO cards !!!\n", + MAX_PCI_SLOT); + } + + + /* + ** I don't think we want to do this anymore + ** + + if (!p->RIOLastPCISearch == RIO_FAIL ) { + p->RIOFailed++; + } + + ** + */ +} + +#ifdef FUTURE_RELEASE +void riohalt( void ) +{ + int host; + for ( host=0; host<p->RIONumHosts; host++ ) + { + rio_dprintk (RIO_DEBUG_INIT, "Stop host %d\n", host); + (void)RIOBoardTest( p->RIOHosts[host].PaddrP, p->RIOHosts[host].Caddr, p->RIOHosts[host].Type,p->RIOHosts[host].Slot ); + } +} +#endif +#endif + +static uchar val[] = { +#ifdef VERY_LONG_TEST + 0x00, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, + 0xa5, 0xff, 0x5a, 0x00, 0xff, 0xc9, 0x36, +#endif + 0xff, 0x00, 0x00 }; + +#define TEST_END sizeof(val) + +/* +** RAM test a board. +** Nothing too complicated, just enough to check it out. +*/ +int +RIOBoardTest(paddr, caddr, type, slot) +paddr_t paddr; +caddr_t caddr; +uchar type; +int slot; +{ + struct DpRam *DpRam = (struct DpRam *)caddr; + char *ram[4]; + int size[4]; + int op, bank; + int nbanks; + + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Reset host type=%d, DpRam=0x%x, slot=%d\n", + type,(int)DpRam, slot); + + RIOHostReset(type, DpRam, slot); + + /* + ** Scrub the memory. This comes in several banks: + ** DPsram1 - 7000h bytes + ** DPsram2 - 200h bytes + ** DPsram3 - 7000h bytes + ** scratch - 1000h bytes + */ + + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Setup ram/size arrays\n"); + + size[0] = DP_SRAM1_SIZE; + size[1] = DP_SRAM2_SIZE; + size[2] = DP_SRAM3_SIZE; + size[3] = DP_SCRATCH_SIZE; + + ram[0] = (char *)&DpRam->DpSram1[0]; + ram[1] = (char *)&DpRam->DpSram2[0]; + ram[2] = (char *)&DpRam->DpSram3[0]; + nbanks = (type == RIO_PCI) ? 3 : 4; + if (nbanks == 4) + ram[3] = (char *)&DpRam->DpScratch[0]; + + + if (nbanks == 3) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Memory: 0x%x(0x%x), 0x%x(0x%x), 0x%x(0x%x)\n", + (int)ram[0], size[0], (int)ram[1], size[1], (int)ram[2], size[2]); + } else { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: 0x%x(0x%x), 0x%x(0x%x), 0x%x(0x%x), 0x%x(0x%x)\n", + (int)ram[0], size[0], (int)ram[1], size[1], (int)ram[2], size[2], (int)ram[3], + size[3]); + } + + /* + ** This scrub operation will test for crosstalk between + ** banks. TEST_END is a magic number, and relates to the offset + ** within the 'val' array used by Scrub. + */ + for (op=0; op<TEST_END; op++) { + for (bank=0; bank<nbanks; bank++) { + if (RIOScrub(op, (BYTE *)ram[bank], size[bank]) == RIO_FAIL) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: RIOScrub band %d, op %d failed\n", + bank, op); + return RIO_FAIL; + } + } + } + + rio_dprintk (RIO_DEBUG_INIT, "Test completed\n"); + return RIO_SUCCESS; +} + + +/* +** Scrub an area of RAM. +** Define PRETEST and POSTTEST for a more thorough checking of the +** state of the memory. +** Call with op set to an index into the above 'val' array to determine +** which value will be written into memory. +** Call with op set to zero means that the RAM will not be read and checked +** before it is written. +** Call with op not zero, and the RAM will be read and compated with val[op-1] +** to check that the data from the previous phase was retained. +*/ +static int +RIOScrub(op, ram, size) +int op; +BYTE * ram; +int size; +{ + int off; + unsigned char oldbyte; + unsigned char newbyte; + unsigned char invbyte; + unsigned short oldword; + unsigned short newword; + unsigned short invword; + unsigned short swapword; + + if (op) { + oldbyte = val[op-1]; + oldword = oldbyte | (oldbyte<<8); + } else + oldbyte = oldword = 0; /* Tell the compiler we've initilalized them. */ + newbyte = val[op]; + newword = newbyte | (newbyte<<8); + invbyte = ~newbyte; + invword = invbyte | (invbyte<<8); + + /* + ** Check that the RAM contains the value that should have been left there + ** by the previous test (not applicable for pass zero) + */ + if (op) { + for (off=0; off<size; off++) { + if (RBYTE(ram[off]) != oldbyte) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 1: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, RBYTE(ram[off])); + return RIO_FAIL; + } + } + for (off=0; off<size; off+=2) { + if (*(ushort *)&ram[off] != oldword) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: WORD at offset 0x%x should have been=%x, was=%x\n",off,oldword,*(ushort *)&ram[off]); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Pre Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, RBYTE(ram[off]), off+1, RBYTE(ram[off+1])); + return RIO_FAIL; + } + } + } + + /* + ** Now write the INVERSE of the test data into every location, using + ** BYTE write operations, first checking before each byte is written + ** that the location contains the old value still, and checking after + ** the write that the location contains the data specified - this is + ** the BYTE read/write test. + */ + for (off=0; off<size; off++) { + if (op && (RBYTE(ram[off]) != oldbyte)) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Pre Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, oldbyte, RBYTE(ram[off])); + return RIO_FAIL; + } + WBYTE(ram[off],invbyte); + if (RBYTE(ram[off]) != invbyte) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Byte Inv Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, invbyte, RBYTE(ram[off])); + return RIO_FAIL; + } + } + + /* + ** now, use WORD operations to write the test value into every location, + ** check as before that the location contains the previous test value + ** before overwriting, and that it contains the data value written + ** afterwards. + ** This is the WORD operation test. + */ + for (off=0; off<size; off+=2) { + if (*(ushort *)&ram[off] != invword) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: WORD at offset 0x%x should have been=%x, was=%x\n", off, invword, *(ushort *)&ram[off]); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Word Inv Check: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, RBYTE(ram[off]), off+1, RBYTE(ram[off+1])); + return RIO_FAIL; + } + + *(ushort *)&ram[off] = newword; + if ( *(ushort *)&ram[off] != newword ) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, *(ushort *)&ram[off]); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, RBYTE(ram[off]), off+1, RBYTE(ram[off+1])); + return RIO_FAIL; + } + } + + /* + ** now run through the block of memory again, first in byte mode + ** then in word mode, and check that all the locations contain the + ** required test data. + */ + for (off=0; off<size; off++) { + if (RBYTE(ram[off]) != newbyte) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Byte Check: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, RBYTE(ram[off])); + return RIO_FAIL; + } + } + + for (off=0; off<size; off+=2) { + if ( *(ushort *)&ram[off] != newword ) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: WORD at offset 0x%x should have been=%x, was=%x\n", off, newword, *(ushort *)&ram[off]); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: Post Word Check 2: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, RBYTE(ram[off]), off+1, RBYTE(ram[off+1])); + return RIO_FAIL; + } + } + + /* + ** time to check out byte swapping errors + */ + swapword = invbyte | (newbyte << 8); + + for (off=0; off<size; off+=2) { + WBYTE(ram[off],invbyte); + WBYTE(ram[off+1],newbyte); + } + + for ( off=0; off<size; off+=2 ) { + if (*(ushort *)&ram[off] != swapword) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: WORD at offset 0x%x should have been=%x, was=%x\n", off, swapword, *((ushort *)&ram[off])); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 1: BYTE at offset 0x%x is %x BYTE at offset 0x%x is %x\n", off, RBYTE(ram[off]), off+1, RBYTE(ram[off+1])); + return RIO_FAIL; + } + *((ushort *)&ram[off]) = ~swapword; + } + + for (off=0; off<size; off+=2) { + if (RBYTE(ram[off]) != newbyte) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off, newbyte, RBYTE(ram[off])); + return RIO_FAIL; + } + if (RBYTE(ram[off+1]) != invbyte) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: SwapWord Check 2: BYTE at offset 0x%x should have been=%x, was=%x\n", off+1, invbyte, RBYTE(ram[off+1])); + return RIO_FAIL; + } + *((ushort *)&ram[off]) = newword; + } + return RIO_SUCCESS; +} + +/* +** try to ensure that every host is either in polled mode +** or is in interrupt mode. Only allow interrupt mode if +** all hosts can interrupt (why?) +** and force into polled mode if told to. Patch up the +** interrupt vector & salute The Queen when you've done. +*/ +#if 0 +static void +RIOAllocateInterrupts(p) +struct rio_info * p; +{ + int Host; + + /* + ** Easy case - if we have been told to poll, then we poll. + */ + if (p->mode & POLLED_MODE) { + RIOStopInterrupts(p, 0, 0); + return; + } + + /* + ** check - if any host has been set to polled mode, then all must be. + */ + for (Host=0; Host<p->RIONumHosts; Host++) { + if ( (p->RIOHosts[Host].Type != RIO_AT) && + (p->RIOHosts[Host].Ivec == POLLED) ) { + RIOStopInterrupts(p, 1, Host ); + return; + } + } + for (Host=0; Host<p->RIONumHosts; Host++) { + if (p->RIOHosts[Host].Type == RIO_AT) { + if ( (p->RIOHosts[Host].Ivec - 32) == 0) { + RIOStopInterrupts(p, 2, Host ); + return; + } + } + } +} + +/* +** something has decided that we can't be doing with these +** new-fangled interrupt thingies. Set everything up to just +** poll. +*/ +static void +RIOStopInterrupts(p, Reason, Host) +struct rio_info * p; +int Reason; +int Host; +{ +#ifdef FUTURE_RELEASE + switch (Reason) { + case 0: /* forced into polling by rio_polled */ + break; + case 1: /* SCU has set 'Host' into polled mode */ + break; + case 2: /* there aren't enough interrupt vectors for 'Host' */ + break; + } +#endif + + for (Host=0; Host<p->RIONumHosts; Host++ ) { + struct Host *HostP = &p->RIOHosts[Host]; + + switch (HostP->Type) { + case RIO_AT: + /* + ** The AT host has it's interrupts disabled by clearing the + ** int_enable bit. + */ + HostP->Mode &= ~INTERRUPT_ENABLE; + HostP->Ivec = POLLED; + break; +#ifdef FUTURE_RELEASE + case RIO_EISA: + /* + ** The EISA host has it's interrupts disabled by setting the + ** Ivec to zero + */ + HostP->Ivec = POLLED; + break; +#endif + case RIO_PCI: + /* + ** The PCI host has it's interrupts disabled by clearing the + ** int_enable bit, like a regular host card. + */ + HostP->Mode &= ~RIO_PCI_INT_ENABLE; + HostP->Ivec = POLLED; + break; +#ifdef FUTURE_RELEASE + case RIO_MCA: + /* + ** There's always one, isn't there? + ** The MCA host card cannot have it's interrupts disabled. + */ + RIOPatchVec(HostP); + break; +#endif + } + } +} + +/* +** This function is called at init time to setup the data structures. +*/ +void +RIOAllocDataStructs(p) +struct rio_info * p; +{ + int port, + host, + tm; + + p->RIOPortp = (struct Port *)sysbrk(RIO_PORTS * sizeof(struct Port)); + if (!p->RIOPortp) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: No memory for port structures\n"); + p->RIOFailed++; + return; + } + bzero( p->RIOPortp, sizeof(struct Port) * RIO_PORTS ); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: allocated and cleared memory for port structs\n"); + rio_dprintk (RIO_DEBUG_INIT, "First RIO port struct @0x%x, size=0x%x bytes\n", + (int)p->RIOPortp, sizeof(struct Port)); + + for( port=0; port<RIO_PORTS; port++ ) { + p->RIOPortp[port].PortNum = port; + p->RIOPortp[port].TtyP = &p->channel[port]; + sreset (p->RIOPortp[port].InUse); /* Let the first guy uses it */ + p->RIOPortp[port].portSem = -1; /* Let the first guy takes it */ + p->RIOPortp[port].ParamSem = -1; /* Let the first guy takes it */ + p->RIOPortp[port].timeout_id = 0; /* Let the first guy takes it */ + } + + p->RIOHosts = (struct Host *)sysbrk(RIO_HOSTS * sizeof(struct Host)); + if (!p->RIOHosts) { + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: No memory for host structures\n"); + p->RIOFailed++; + return; + } + bzero(p->RIOHosts, sizeof(struct Host)*RIO_HOSTS); + rio_dprintk (RIO_DEBUG_INIT, "RIO-init: allocated and cleared memory for host structs\n"); + rio_dprintk (RIO_DEBUG_INIT, "First RIO host struct @0x%x, size=0x%x bytes\n", + (int)p->RIOHosts, sizeof(struct Host)); + + for( host=0; host<RIO_HOSTS; host++ ) { + spin_lock_init (&p->RIOHosts[host].HostLock); + p->RIOHosts[host].timeout_id = 0; /* Let the first guy takes it */ + } + /* + ** check that the buffer size is valid, round down to the next power of + ** two if necessary; if the result is zero, then, hey, no double buffers. + */ + for ( tm = 1; tm && tm <= p->RIOConf.BufferSize; tm <<= 1 ) + ; + tm >>= 1; + p->RIOBufferSize = tm; + p->RIOBufferMask = tm ? tm - 1 : 0; +} + +/* +** this function gets called whenever the data structures need to be +** re-setup, for example, after a riohalt (why did I ever invent it?) +*/ +void +RIOSetupDataStructs(p) +struct rio_info * p; +{ + int host, entry, rup; + + for ( host=0; host<RIO_HOSTS; host++ ) { + struct Host *HostP = &p->RIOHosts[host]; + for ( entry=0; entry<LINKS_PER_UNIT; entry++ ) { + HostP->Topology[entry].Unit = ROUTE_DISCONNECT; + HostP->Topology[entry].Link = NO_LINK; + } + bcopy("HOST X", HostP->Name, 7); + HostP->Name[5] = '1'+host; + for (rup=0; rup<(MAX_RUP + LINKS_PER_UNIT); rup++) { + if (rup < MAX_RUP) { + for (entry=0; entry<LINKS_PER_UNIT; entry++ ) { + HostP->Mapping[rup].Topology[entry].Unit = ROUTE_DISCONNECT; + HostP->Mapping[rup].Topology[entry].Link = NO_LINK; + } + RIODefaultName(p, HostP, rup); + } + spin_lock_init(&HostP->UnixRups[rup].RupLock); + } + } +} +#endif + +int +RIODefaultName(p, HostP, UnitId) +struct rio_info * p; +struct Host * HostP; +uint UnitId; +{ +#ifdef CHECK + CheckHost( Host ); + CheckUnitId( UnitId ); +#endif + bcopy("UNKNOWN RTA X-XX",HostP->Mapping[UnitId].Name,17); + HostP->Mapping[UnitId].Name[12]='1'+(HostP-p->RIOHosts); + if ((UnitId+1) > 9) { + HostP->Mapping[UnitId].Name[14]='0'+((UnitId+1)/10); + HostP->Mapping[UnitId].Name[15]='0'+((UnitId+1)%10); + } + else { + HostP->Mapping[UnitId].Name[14]='1'+UnitId; + HostP->Mapping[UnitId].Name[15]=0; + } + return 0; +} + +#define RIO_RELEASE "Linux" +#define RELEASE_ID "1.0" + +#if 0 +static int +RIOReport(p) +struct rio_info * p; +{ + char * RIORelease = RIO_RELEASE; + char * RIORelID = RELEASE_ID; + int host; + + rio_dprintk (RIO_DEBUG_INIT, "RIO : Release: %s ID: %s\n", RIORelease, RIORelID); + + if ( p->RIONumHosts==0 ) { + rio_dprintk (RIO_DEBUG_INIT, "\nNo Hosts configured\n"); + return(0); + } + + for ( host=0; host < p->RIONumHosts; host++ ) { + struct Host *HostP = &p->RIOHosts[host]; + switch ( HostP->Type ) { + case RIO_AT: + rio_dprintk (RIO_DEBUG_INIT, "AT BUS : found the card at 0x%x\n", HostP->PaddrP); + } + } + return 0; +} +#endif + +static struct rioVersion stVersion; + +struct rioVersion * +RIOVersid(void) +{ + strlcpy(stVersion.version, "RIO driver for linux V1.0", + sizeof(stVersion.version)); + strlcpy(stVersion.buildDate, __DATE__, + sizeof(stVersion.buildDate)); + + return &stVersion; +} + +#if 0 +int +RIOMapin(paddr, size, vaddr) +paddr_t paddr; +int size; +caddr_t * vaddr; +{ + *vaddr = (caddr_t)permap( (long)paddr, size); + return ((int)*vaddr); +} + +void +RIOMapout(paddr, size, vaddr) +paddr_t paddr; +long size; +caddr_t vaddr; +{ +} +#endif + + +void +RIOHostReset(Type, DpRamP, Slot) +uint Type; +volatile struct DpRam *DpRamP; +uint Slot; +{ + /* + ** Reset the Tpu + */ + rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: type 0x%x", Type); + switch ( Type ) { + case RIO_AT: + rio_dprintk (RIO_DEBUG_INIT, " (RIO_AT)\n"); + WBYTE(DpRamP->DpControl, BOOT_FROM_RAM | EXTERNAL_BUS_OFF | + INTERRUPT_DISABLE | BYTE_OPERATION | + SLOW_LINKS | SLOW_AT_BUS); + WBYTE(DpRamP->DpResetTpu, 0xFF); + rio_udelay (3); + + rio_dprintk (RIO_DEBUG_INIT, "RIOHostReset: Don't know if it worked. Try reset again\n"); + WBYTE(DpRamP->DpControl, BOOT_FROM_RAM | EXTERNAL_BUS_OFF | + INTERRUPT_DISABLE | BYTE_OPERATION | + SLOW_LINKS | SLOW_AT_BUS); + WBYTE(DpRamP->DpResetTpu, 0xFF); + rio_udelay (3); + break; +#ifdef FUTURE_RELEASE + case RIO_EISA: + /* + ** Bet this doesn't work! + */ + OUTBZ( Slot, EISA_CONTROL_PORT, + EISA_TP_RUN | EISA_TP_BUS_DISABLE | + EISA_TP_SLOW_LINKS | EISA_TP_BOOT_FROM_RAM ); + OUTBZ( Slot, EISA_CONTROL_PORT, + EISA_TP_RESET | EISA_TP_BUS_DISABLE | + EISA_TP_SLOW_LINKS | EISA_TP_BOOT_FROM_RAM ); + suspend( 3 ); + OUTBZ( Slot, EISA_CONTROL_PORT, + EISA_TP_RUN | EISA_TP_BUS_DISABLE | + EISA_TP_SLOW_LINKS | EISA_TP_BOOT_FROM_RAM ); + break; + case RIO_MCA: + WBYTE(DpRamP->DpControl , McaTpBootFromRam | McaTpBusDisable ); + WBYTE(DpRamP->DpResetTpu , 0xFF ); + suspend( 3 ); + WBYTE(DpRamP->DpControl , McaTpBootFromRam | McaTpBusDisable ); + WBYTE(DpRamP->DpResetTpu , 0xFF ); + suspend( 3 ); + break; +#endif + case RIO_PCI: + rio_dprintk (RIO_DEBUG_INIT, " (RIO_PCI)\n"); + DpRamP->DpControl = RIO_PCI_BOOT_FROM_RAM; + DpRamP->DpResetInt = 0xFF; + DpRamP->DpResetTpu = 0xFF; + rio_udelay (100); + /* for (i=0; i<6000; i++); */ + /* suspend( 3 ); */ + break; +#ifdef FUTURE_RELEASE + default: + Rprintf(RIOMesgNoSupport,Type,DpRamP,Slot); + return; +#endif + + default: + rio_dprintk (RIO_DEBUG_INIT, " (UNKNOWN)\n"); + break; + } + return; +} |