diff options
Diffstat (limited to 'drivers/char/synclink.c')
| -rw-r--r-- | drivers/char/synclink.c | 8214 |
1 files changed, 8214 insertions, 0 deletions
diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c new file mode 100644 index 00000000000..37c8bea8e2b --- /dev/null +++ b/drivers/char/synclink.c @@ -0,0 +1,8214 @@ +/* + * linux/drivers/char/synclink.c + * + * $Id: synclink.c,v 4.28 2004/08/11 19:30:01 paulkf Exp $ + * + * Device driver for Microgate SyncLink ISA and PCI + * high speed multiprotocol serial adapters. + * + * written by Paul Fulghum for Microgate Corporation + * paulkf@microgate.com + * + * Microgate and SyncLink are trademarks of Microgate Corporation + * + * Derived from serial.c written by Theodore Ts'o and Linus Torvalds + * + * Original release 01/11/99 + * + * This code is released under the GNU General Public License (GPL) + * + * This driver is primarily intended for use in synchronous + * HDLC mode. Asynchronous mode is also provided. + * + * When operating in synchronous mode, each call to mgsl_write() + * contains exactly one complete HDLC frame. Calling mgsl_put_char + * will start assembling an HDLC frame that will not be sent until + * mgsl_flush_chars or mgsl_write is called. + * + * Synchronous receive data is reported as complete frames. To accomplish + * this, the TTY flip buffer is bypassed (too small to hold largest + * frame and may fragment frames) and the line discipline + * receive entry point is called directly. + * + * This driver has been tested with a slightly modified ppp.c driver + * for synchronous PPP. + * + * 2000/02/16 + * Added interface for syncppp.c driver (an alternate synchronous PPP + * implementation that also supports Cisco HDLC). Each device instance + * registers as a tty device AND a network device (if dosyncppp option + * is set for the device). The functionality is determined by which + * device interface is opened. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#if defined(__i386__) +# define BREAKPOINT() asm(" int $3"); +#else +# define BREAKPOINT() { } +#endif + +#define MAX_ISA_DEVICES 10 +#define MAX_PCI_DEVICES 10 +#define MAX_TOTAL_DEVICES 20 + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/major.h> +#include <linux/string.h> +#include <linux/fcntl.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include <linux/netdevice.h> + +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <asm/serial.h> + +#include <linux/delay.h> +#include <linux/ioctl.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/dma.h> +#include <linux/bitops.h> +#include <asm/types.h> +#include <linux/termios.h> +#include <linux/workqueue.h> +#include <linux/hdlc.h> + +#ifdef CONFIG_HDLC_MODULE +#define CONFIG_HDLC 1 +#endif + +#define GET_USER(error,value,addr) error = get_user(value,addr) +#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0 +#define PUT_USER(error,value,addr) error = put_user(value,addr) +#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0 + +#include <asm/uaccess.h> + +#include "linux/synclink.h" + +#define RCLRVALUE 0xffff + +static MGSL_PARAMS default_params = { + MGSL_MODE_HDLC, /* unsigned long mode */ + 0, /* unsigned char loopback; */ + HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */ + HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */ + 0, /* unsigned long clock_speed; */ + 0xff, /* unsigned char addr_filter; */ + HDLC_CRC_16_CCITT, /* unsigned short crc_type; */ + HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */ + HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */ + 9600, /* unsigned long data_rate; */ + 8, /* unsigned char data_bits; */ + 1, /* unsigned char stop_bits; */ + ASYNC_PARITY_NONE /* unsigned char parity; */ +}; + +#define SHARED_MEM_ADDRESS_SIZE 0x40000 +#define BUFFERLISTSIZE (PAGE_SIZE) +#define DMABUFFERSIZE (PAGE_SIZE) +#define MAXRXFRAMES 7 + +typedef struct _DMABUFFERENTRY +{ + u32 phys_addr; /* 32-bit flat physical address of data buffer */ + u16 count; /* buffer size/data count */ + u16 status; /* Control/status field */ + u16 rcc; /* character count field */ + u16 reserved; /* padding required by 16C32 */ + u32 link; /* 32-bit flat link to next buffer entry */ + char *virt_addr; /* virtual address of data buffer */ + u32 phys_entry; /* physical address of this buffer entry */ +} DMABUFFERENTRY, *DMAPBUFFERENTRY; + +/* The queue of BH actions to be performed */ + +#define BH_RECEIVE 1 +#define BH_TRANSMIT 2 +#define BH_STATUS 4 + +#define IO_PIN_SHUTDOWN_LIMIT 100 + +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + +struct _input_signal_events { + int ri_up; + int ri_down; + int dsr_up; + int dsr_down; + int dcd_up; + int dcd_down; + int cts_up; + int cts_down; +}; + +/* transmit holding buffer definitions*/ +#define MAX_TX_HOLDING_BUFFERS 5 +struct tx_holding_buffer { + int buffer_size; + unsigned char * buffer; +}; + + +/* + * Device instance data structure + */ + +struct mgsl_struct { + int magic; + int flags; + int count; /* count of opens */ + int line; + int hw_version; + unsigned short close_delay; + unsigned short closing_wait; /* time to wait before closing */ + + struct mgsl_icount icount; + + struct tty_struct *tty; + int timeout; + int x_char; /* xon/xoff character */ + int blocked_open; /* # of blocked opens */ + u16 read_status_mask; + u16 ignore_status_mask; + unsigned char *xmit_buf; + int xmit_head; + int xmit_tail; + int xmit_cnt; + + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + wait_queue_head_t status_event_wait_q; + wait_queue_head_t event_wait_q; + struct timer_list tx_timer; /* HDLC transmit timeout timer */ + struct mgsl_struct *next_device; /* device list link */ + + spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */ + struct work_struct task; /* task structure for scheduling bh */ + + u32 EventMask; /* event trigger mask */ + u32 RecordedEvents; /* pending events */ + + u32 max_frame_size; /* as set by device config */ + + u32 pending_bh; + + int bh_running; /* Protection from multiple */ + int isr_overflow; + int bh_requested; + + int dcd_chkcount; /* check counts to prevent */ + int cts_chkcount; /* too many IRQs if a signal */ + int dsr_chkcount; /* is floating */ + int ri_chkcount; + + char *buffer_list; /* virtual address of Rx & Tx buffer lists */ + unsigned long buffer_list_phys; + + unsigned int rx_buffer_count; /* count of total allocated Rx buffers */ + DMABUFFERENTRY *rx_buffer_list; /* list of receive buffer entries */ + unsigned int current_rx_buffer; + + int num_tx_dma_buffers; /* number of tx dma frames required */ + int tx_dma_buffers_used; + unsigned int tx_buffer_count; /* count of total allocated Tx buffers */ + DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */ + int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */ + int current_tx_buffer; /* next tx dma buffer to be loaded */ + + unsigned char *intermediate_rxbuffer; + + int num_tx_holding_buffers; /* number of tx holding buffer allocated */ + int get_tx_holding_index; /* next tx holding buffer for adapter to load */ + int put_tx_holding_index; /* next tx holding buffer to store user request */ + int tx_holding_count; /* number of tx holding buffers waiting */ + struct tx_holding_buffer tx_holding_buffers[MAX_TX_HOLDING_BUFFERS]; + + int rx_enabled; + int rx_overflow; + int rx_rcc_underrun; + + int tx_enabled; + int tx_active; + u32 idle_mode; + + u16 cmr_value; + u16 tcsr_value; + + char device_name[25]; /* device instance name */ + + unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */ + unsigned char bus; /* expansion bus number (zero based) */ + unsigned char function; /* PCI device number */ + + unsigned int io_base; /* base I/O address of adapter */ + unsigned int io_addr_size; /* size of the I/O address range */ + int io_addr_requested; /* nonzero if I/O address requested */ + + unsigned int irq_level; /* interrupt level */ + unsigned long irq_flags; + int irq_requested; /* nonzero if IRQ requested */ + + unsigned int dma_level; /* DMA channel */ + int dma_requested; /* nonzero if dma channel requested */ + + u16 mbre_bit; + u16 loopback_bits; + u16 usc_idle_mode; + + MGSL_PARAMS params; /* communications parameters */ + + unsigned char serial_signals; /* current serial signal states */ + + int irq_occurred; /* for diagnostics use */ + unsigned int init_error; /* Initialization startup error (DIAGS) */ + int fDiagnosticsmode; /* Driver in Diagnostic mode? (DIAGS) */ + + u32 last_mem_alloc; + unsigned char* memory_base; /* shared memory address (PCI only) */ + u32 phys_memory_base; + int shared_mem_requested; + + unsigned char* lcr_base; /* local config registers (PCI only) */ + u32 phys_lcr_base; + u32 lcr_offset; + int lcr_mem_requested; + + u32 misc_ctrl_value; + char flag_buf[MAX_ASYNC_BUFFER_SIZE]; + char char_buf[MAX_ASYNC_BUFFER_SIZE]; + BOOLEAN drop_rts_on_tx_done; + + BOOLEAN loopmode_insert_requested; + BOOLEAN loopmode_send_done_requested; + + struct _input_signal_events input_signal_events; + + /* generic HDLC device parts */ + int netcount; + int dosyncppp; + spinlock_t netlock; + +#ifdef CONFIG_HDLC + struct net_device *netdev; +#endif +}; + +#define MGSL_MAGIC 0x5401 + +/* + * The size of the serial xmit buffer is 1 page, or 4096 bytes + */ +#ifndef SERIAL_XMIT_SIZE +#define SERIAL_XMIT_SIZE 4096 +#endif + +/* + * These macros define the offsets used in calculating the + * I/O address of the specified USC registers. + */ + + +#define DCPIN 2 /* Bit 1 of I/O address */ +#define SDPIN 4 /* Bit 2 of I/O address */ + +#define DCAR 0 /* DMA command/address register */ +#define CCAR SDPIN /* channel command/address register */ +#define DATAREG DCPIN + SDPIN /* serial data register */ +#define MSBONLY 0x41 +#define LSBONLY 0x40 + +/* + * These macros define the register address (ordinal number) + * used for writing address/value pairs to the USC. + */ + +#define CMR 0x02 /* Channel mode Register */ +#define CCSR 0x04 /* Channel Command/status Register */ +#define CCR 0x06 /* Channel Control Register */ +#define PSR 0x08 /* Port status Register */ +#define PCR 0x0a /* Port Control Register */ +#define TMDR 0x0c /* Test mode Data Register */ +#define TMCR 0x0e /* Test mode Control Register */ +#define CMCR 0x10 /* Clock mode Control Register */ +#define HCR 0x12 /* Hardware Configuration Register */ +#define IVR 0x14 /* Interrupt Vector Register */ +#define IOCR 0x16 /* Input/Output Control Register */ +#define ICR 0x18 /* Interrupt Control Register */ +#define DCCR 0x1a /* Daisy Chain Control Register */ +#define MISR 0x1c /* Misc Interrupt status Register */ +#define SICR 0x1e /* status Interrupt Control Register */ +#define RDR 0x20 /* Receive Data Register */ +#define RMR 0x22 /* Receive mode Register */ +#define RCSR 0x24 /* Receive Command/status Register */ +#define RICR 0x26 /* Receive Interrupt Control Register */ +#define RSR 0x28 /* Receive Sync Register */ +#define RCLR 0x2a /* Receive count Limit Register */ +#define RCCR 0x2c /* Receive Character count Register */ +#define TC0R 0x2e /* Time Constant 0 Register */ +#define TDR 0x30 /* Transmit Data Register */ +#define TMR 0x32 /* Transmit mode Register */ +#define TCSR 0x34 /* Transmit Command/status Register */ +#define TICR 0x36 /* Transmit Interrupt Control Register */ +#define TSR 0x38 /* Transmit Sync Register */ +#define TCLR 0x3a /* Transmit count Limit Register */ +#define TCCR 0x3c /* Transmit Character count Register */ +#define TC1R 0x3e /* Time Constant 1 Register */ + + +/* + * MACRO DEFINITIONS FOR DMA REGISTERS + */ + +#define DCR 0x06 /* DMA Control Register (shared) */ +#define DACR 0x08 /* DMA Array count Register (shared) */ +#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */ +#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */ +#define DICR 0x18 /* DMA Interrupt Control Register (shared) */ +#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */ +#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */ + +#define TDMR 0x02 /* Transmit DMA mode Register */ +#define TDIAR 0x1e /* Transmit DMA Interrupt Arm Register */ +#define TBCR 0x2a /* Transmit Byte count Register */ +#define TARL 0x2c /* Transmit Address Register (low) */ +#define TARU 0x2e /* Transmit Address Register (high) */ +#define NTBCR 0x3a /* Next Transmit Byte count Register */ +#define NTARL 0x3c /* Next Transmit Address Register (low) */ +#define NTARU 0x3e /* Next Transmit Address Register (high) */ + +#define RDMR 0x82 /* Receive DMA mode Register (non-shared) */ +#define RDIAR 0x9e /* Receive DMA Interrupt Arm Register */ +#define RBCR 0xaa /* Receive Byte count Register */ +#define RARL 0xac /* Receive Address Register (low) */ +#define RARU 0xae /* Receive Address Register (high) */ +#define NRBCR 0xba /* Next Receive Byte count Register */ +#define NRARL 0xbc /* Next Receive Address Register (low) */ +#define NRARU 0xbe /* Next Receive Address Register (high) */ + + +/* + * MACRO DEFINITIONS FOR MODEM STATUS BITS + */ + +#define MODEMSTATUS_DTR 0x80 +#define MODEMSTATUS_DSR 0x40 +#define MODEMSTATUS_RTS 0x20 +#define MODEMSTATUS_CTS 0x10 +#define MODEMSTATUS_RI 0x04 +#define MODEMSTATUS_DCD 0x01 + + +/* + * Channel Command/Address Register (CCAR) Command Codes + */ + +#define RTCmd_Null 0x0000 +#define RTCmd_ResetHighestIus 0x1000 +#define RTCmd_TriggerChannelLoadDma 0x2000 +#define RTCmd_TriggerRxDma 0x2800 +#define RTCmd_TriggerTxDma 0x3000 +#define RTCmd_TriggerRxAndTxDma 0x3800 +#define RTCmd_PurgeRxFifo 0x4800 +#define RTCmd_PurgeTxFifo 0x5000 +#define RTCmd_PurgeRxAndTxFifo 0x5800 +#define RTCmd_LoadRcc 0x6800 +#define RTCmd_LoadTcc 0x7000 +#define RTCmd_LoadRccAndTcc 0x7800 +#define RTCmd_LoadTC0 0x8800 +#define RTCmd_LoadTC1 0x9000 +#define RTCmd_LoadTC0AndTC1 0x9800 +#define RTCmd_SerialDataLSBFirst 0xa000 +#define RTCmd_SerialDataMSBFirst 0xa800 +#define RTCmd_SelectBigEndian 0xb000 +#define RTCmd_SelectLittleEndian 0xb800 + + +/* + * DMA Command/Address Register (DCAR) Command Codes + */ + +#define DmaCmd_Null 0x0000 +#define DmaCmd_ResetTxChannel 0x1000 +#define DmaCmd_ResetRxChannel 0x1200 +#define DmaCmd_StartTxChannel 0x2000 +#define DmaCmd_StartRxChannel 0x2200 +#define DmaCmd_ContinueTxChannel 0x3000 +#define DmaCmd_ContinueRxChannel 0x3200 +#define DmaCmd_PauseTxChannel 0x4000 +#define DmaCmd_PauseRxChannel 0x4200 +#define DmaCmd_AbortTxChannel 0x5000 +#define DmaCmd_AbortRxChannel 0x5200 +#define DmaCmd_InitTxChannel 0x7000 +#define DmaCmd_InitRxChannel 0x7200 +#define DmaCmd_ResetHighestDmaIus 0x8000 +#define DmaCmd_ResetAllChannels 0x9000 +#define DmaCmd_StartAllChannels 0xa000 +#define DmaCmd_ContinueAllChannels 0xb000 +#define DmaCmd_PauseAllChannels 0xc000 +#define DmaCmd_AbortAllChannels 0xd000 +#define DmaCmd_InitAllChannels 0xf000 + +#define TCmd_Null 0x0000 +#define TCmd_ClearTxCRC 0x2000 +#define TCmd_SelectTicrTtsaData 0x4000 +#define TCmd_SelectTicrTxFifostatus 0x5000 +#define TCmd_SelectTicrIntLevel 0x6000 +#define TCmd_SelectTicrdma_level 0x7000 +#define TCmd_SendFrame 0x8000 +#define TCmd_SendAbort 0x9000 +#define TCmd_EnableDleInsertion 0xc000 +#define TCmd_DisableDleInsertion 0xd000 +#define TCmd_ClearEofEom 0xe000 +#define TCmd_SetEofEom 0xf000 + +#define RCmd_Null 0x0000 +#define RCmd_ClearRxCRC 0x2000 +#define RCmd_EnterHuntmode 0x3000 +#define RCmd_SelectRicrRtsaData 0x4000 +#define RCmd_SelectRicrRxFifostatus 0x5000 +#define RCmd_SelectRicrIntLevel 0x6000 +#define RCmd_SelectRicrdma_level 0x7000 + +/* + * Bits for enabling and disabling IRQs in Interrupt Control Register (ICR) + */ + +#define RECEIVE_STATUS BIT5 +#define RECEIVE_DATA BIT4 +#define TRANSMIT_STATUS BIT3 +#define TRANSMIT_DATA BIT2 +#define IO_PIN BIT1 +#define MISC BIT0 + + +/* + * Receive status Bits in Receive Command/status Register RCSR + */ + +#define RXSTATUS_SHORT_FRAME BIT8 +#define RXSTATUS_CODE_VIOLATION BIT8 +#define RXSTATUS_EXITED_HUNT BIT7 +#define RXSTATUS_IDLE_RECEIVED BIT6 +#define RXSTATUS_BREAK_RECEIVED BIT5 +#define RXSTATUS_ABORT_RECEIVED BIT5 +#define RXSTATUS_RXBOUND BIT4 +#define RXSTATUS_CRC_ERROR BIT3 +#define RXSTATUS_FRAMING_ERROR BIT3 +#define RXSTATUS_ABORT BIT2 +#define RXSTATUS_PARITY_ERROR BIT2 +#define RXSTATUS_OVERRUN BIT1 +#define RXSTATUS_DATA_AVAILABLE BIT0 +#define RXSTATUS_ALL 0x01f6 +#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) ) + +/* + * Values for setting transmit idle mode in + * Transmit Control/status Register (TCSR) + */ +#define IDLEMODE_FLAGS 0x0000 +#define IDLEMODE_ALT_ONE_ZERO 0x0100 +#define IDLEMODE_ZERO 0x0200 +#define IDLEMODE_ONE 0x0300 +#define IDLEMODE_ALT_MARK_SPACE 0x0500 +#define IDLEMODE_SPACE 0x0600 +#define IDLEMODE_MARK 0x0700 +#define IDLEMODE_MASK 0x0700 + +/* + * IUSC revision identifiers + */ +#define IUSC_SL1660 0x4d44 +#define IUSC_PRE_SL1660 0x4553 + +/* + * Transmit status Bits in Transmit Command/status Register (TCSR) + */ + +#define TCSR_PRESERVE 0x0F00 + +#define TCSR_UNDERWAIT BIT11 +#define TXSTATUS_PREAMBLE_SENT BIT7 +#define TXSTATUS_IDLE_SENT BIT6 +#define TXSTATUS_ABORT_SENT BIT5 +#define TXSTATUS_EOF_SENT BIT4 +#define TXSTATUS_EOM_SENT BIT4 +#define TXSTATUS_CRC_SENT BIT3 +#define TXSTATUS_ALL_SENT BIT2 +#define TXSTATUS_UNDERRUN BIT1 +#define TXSTATUS_FIFO_EMPTY BIT0 +#define TXSTATUS_ALL 0x00fa +#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) ) + + +#define MISCSTATUS_RXC_LATCHED BIT15 +#define MISCSTATUS_RXC BIT14 +#define MISCSTATUS_TXC_LATCHED BIT13 +#define MISCSTATUS_TXC BIT12 +#define MISCSTATUS_RI_LATCHED BIT11 +#define MISCSTATUS_RI BIT10 +#define MISCSTATUS_DSR_LATCHED BIT9 +#define MISCSTATUS_DSR BIT8 +#define MISCSTATUS_DCD_LATCHED BIT7 +#define MISCSTATUS_DCD BIT6 +#define MISCSTATUS_CTS_LATCHED BIT5 +#define MISCSTATUS_CTS BIT4 +#define MISCSTATUS_RCC_UNDERRUN BIT3 +#define MISCSTATUS_DPLL_NO_SYNC BIT2 +#define MISCSTATUS_BRG1_ZERO BIT1 +#define MISCSTATUS_BRG0_ZERO BIT0 + +#define usc_UnlatchIostatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0xaaa0)) +#define usc_UnlatchMiscstatusBits(a,b) usc_OutReg((a),MISR,(u16)((b) & 0x000f)) + +#define SICR_RXC_ACTIVE BIT15 +#define SICR_RXC_INACTIVE BIT14 +#define SICR_RXC (BIT15+BIT14) +#define SICR_TXC_ACTIVE BIT13 +#define SICR_TXC_INACTIVE BIT12 +#define SICR_TXC (BIT13+BIT12) +#define SICR_RI_ACTIVE BIT11 +#define SICR_RI_INACTIVE BIT10 +#define SICR_RI (BIT11+BIT10) +#define SICR_DSR_ACTIVE BIT9 +#define SICR_DSR_INACTIVE BIT8 +#define SICR_DSR (BIT9+BIT8) +#define SICR_DCD_ACTIVE BIT7 +#define SICR_DCD_INACTIVE BIT6 +#define SICR_DCD (BIT7+BIT6) +#define SICR_CTS_ACTIVE BIT5 +#define SICR_CTS_INACTIVE BIT4 +#define SICR_CTS (BIT5+BIT4) +#define SICR_RCC_UNDERFLOW BIT3 +#define SICR_DPLL_NO_SYNC BIT2 +#define SICR_BRG1_ZERO BIT1 +#define SICR_BRG0_ZERO BIT0 + +void usc_DisableMasterIrqBit( struct mgsl_struct *info ); +void usc_EnableMasterIrqBit( struct mgsl_struct *info ); +void usc_EnableInterrupts( struct mgsl_struct *info, u16 IrqMask ); +void usc_DisableInterrupts( struct mgsl_struct *info, u16 IrqMask ); +void usc_ClearIrqPendingBits( struct mgsl_struct *info, u16 IrqMask ); + +#define usc_EnableInterrupts( a, b ) \ + usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0xc0 + (b)) ) + +#define usc_DisableInterrupts( a, b ) \ + usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0xff00) + 0x80 + (b)) ) + +#define usc_EnableMasterIrqBit(a) \ + usc_OutReg( (a), ICR, (u16)((usc_InReg((a),ICR) & 0x0f00) + 0xb000) ) + +#define usc_DisableMasterIrqBit(a) \ + usc_OutReg( (a), ICR, (u16)(usc_InReg((a),ICR) & 0x7f00) ) + +#define usc_ClearIrqPendingBits( a, b ) usc_OutReg( (a), DCCR, 0x40 + (b) ) + +/* + * Transmit status Bits in Transmit Control status Register (TCSR) + * and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) + */ + +#define TXSTATUS_PREAMBLE_SENT BIT7 +#define TXSTATUS_IDLE_SENT BIT6 +#define TXSTATUS_ABORT_SENT BIT5 +#define TXSTATUS_EOF BIT4 +#define TXSTATUS_CRC_SENT BIT3 +#define TXSTATUS_ALL_SENT BIT2 +#define TXSTATUS_UNDERRUN BIT1 +#define TXSTATUS_FIFO_EMPTY BIT0 + +#define DICR_MASTER BIT15 +#define DICR_TRANSMIT BIT0 +#define DICR_RECEIVE BIT1 + +#define usc_EnableDmaInterrupts(a,b) \ + usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) | (b)) ) + +#define usc_DisableDmaInterrupts(a,b) \ + usc_OutDmaReg( (a), DICR, (u16)(usc_InDmaReg((a),DICR) & ~(b)) ) + +#define usc_EnableStatusIrqs(a,b) \ + usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) | (b)) ) + +#define usc_DisablestatusIrqs(a,b) \ + usc_OutReg( (a), SICR, (u16)(usc_InReg((a),SICR) & ~(b)) ) + +/* Transmit status Bits in Transmit Control status Register (TCSR) */ +/* and Transmit Interrupt Control Register (TICR) (except BIT2, BIT0) */ + + +#define DISABLE_UNCONDITIONAL 0 +#define DISABLE_END_OF_FRAME 1 +#define ENABLE_UNCONDITIONAL 2 +#define ENABLE_AUTO_CTS 3 +#define ENABLE_AUTO_DCD 3 +#define usc_EnableTransmitter(a,b) \ + usc_OutReg( (a), TMR, (u16)((usc_InReg((a),TMR) & 0xfffc) | (b)) ) +#define usc_EnableReceiver(a,b) \ + usc_OutReg( (a), RMR, (u16)((usc_InReg((a),RMR) & 0xfffc) | (b)) ) + +static u16 usc_InDmaReg( struct mgsl_struct *info, u16 Port ); +static void usc_OutDmaReg( struct mgsl_struct *info, u16 Port, u16 Value ); +static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ); + +static u16 usc_InReg( struct mgsl_struct *info, u16 Port ); +static void usc_OutReg( struct mgsl_struct *info, u16 Port, u16 Value ); +static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ); +void usc_RCmd( struct mgsl_struct *info, u16 Cmd ); +void usc_TCmd( struct mgsl_struct *info, u16 Cmd ); + +#define usc_TCmd(a,b) usc_OutReg((a), TCSR, (u16)((a)->tcsr_value + (b))) +#define usc_RCmd(a,b) usc_OutReg((a), RCSR, (b)) + +#define usc_SetTransmitSyncChars(a,s0,s1) usc_OutReg((a), TSR, (u16)(((u16)s0<<8)|(u16)s1)) + +static void usc_process_rxoverrun_sync( struct mgsl_struct *info ); +static void usc_start_receiver( struct mgsl_struct *info ); +static void usc_stop_receiver( struct mgsl_struct *info ); + +static void usc_start_transmitter( struct mgsl_struct *info ); +static void usc_stop_transmitter( struct mgsl_struct *info ); +static void usc_set_txidle( struct mgsl_struct *info ); +static void usc_load_txfifo( struct mgsl_struct *info ); + +static void usc_enable_aux_clock( struct mgsl_struct *info, u32 DataRate ); +static void usc_enable_loopback( struct mgsl_struct *info, int enable ); + +static void usc_get_serial_signals( struct mgsl_struct *info ); +static void usc_set_serial_signals( struct mgsl_struct *info ); + +static void usc_reset( struct mgsl_struct *info ); + +static void usc_set_sync_mode( struct mgsl_struct *info ); +static void usc_set_sdlc_mode( struct mgsl_struct *info ); +static void usc_set_async_mode( struct mgsl_struct *info ); +static void usc_enable_async_clock( struct mgsl_struct *info, u32 DataRate ); + +static void usc_loopback_frame( struct mgsl_struct *info ); + +static void mgsl_tx_timeout(unsigned long context); + + +static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ); +static void usc_loopmode_insert_request( struct mgsl_struct * info ); +static int usc_loopmode_active( struct mgsl_struct * info); +static void usc_loopmode_send_done( struct mgsl_struct * info ); + +static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg); + +#ifdef CONFIG_HDLC +#define dev_to_port(D) (dev_to_hdlc(D)->priv) +static void hdlcdev_tx_done(struct mgsl_struct *info); +static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size); +static int hdlcdev_init(struct mgsl_struct *info); +static void hdlcdev_exit(struct mgsl_struct *info); +#endif + +/* + * Defines a BUS descriptor value for the PCI adapter + * local bus address ranges. + */ + +#define BUS_DESCRIPTOR( WrHold, WrDly, RdDly, Nwdd, Nwad, Nxda, Nrdd, Nrad ) \ +(0x00400020 + \ +((WrHold) << 30) + \ +((WrDly) << 28) + \ +((RdDly) << 26) + \ +((Nwdd) << 20) + \ +((Nwad) << 15) + \ +((Nxda) << 13) + \ +((Nrdd) << 11) + \ +((Nrad) << 6) ) + +static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit); + +/* + * Adapter diagnostic routines + */ +static BOOLEAN mgsl_register_test( struct mgsl_struct *info ); +static BOOLEAN mgsl_irq_test( struct mgsl_struct *info ); +static BOOLEAN mgsl_dma_test( struct mgsl_struct *info ); +static BOOLEAN mgsl_memory_test( struct mgsl_struct *info ); +static int mgsl_adapter_test( struct mgsl_struct *info ); + +/* + * device and resource management routines + */ +static int mgsl_claim_resources(struct mgsl_struct *info); +static void mgsl_release_resources(struct mgsl_struct *info); +static void mgsl_add_device(struct mgsl_struct *info); +static struct mgsl_struct* mgsl_allocate_device(void); + +/* + * DMA buffer manupulation functions. + */ +static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ); +static int mgsl_get_rx_frame( struct mgsl_struct *info ); +static int mgsl_get_raw_rx_frame( struct mgsl_struct *info ); +static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ); +static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ); +static int num_free_tx_dma_buffers(struct mgsl_struct *info); +static void mgsl_load_tx_dma_buffer( struct mgsl_struct *info, const char *Buffer, unsigned int BufferSize); +static void mgsl_load_pci_memory(char* TargetPtr, const char* SourcePtr, unsigned short count); + +/* + * DMA and Shared Memory buffer allocation and formatting + */ +static int mgsl_allocate_dma_buffers(struct mgsl_struct *info); +static void mgsl_free_dma_buffers(struct mgsl_struct *info); +static int mgsl_alloc_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); +static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList,int Buffercount); +static int mgsl_alloc_buffer_list_memory(struct mgsl_struct *info); +static void mgsl_free_buffer_list_memory(struct mgsl_struct *info); +static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info); +static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info); +static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info); +static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info); +static int load_next_tx_holding_buffer(struct mgsl_struct *info); +static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize); + +/* + * Bottom half interrupt handlers + */ +static void mgsl_bh_handler(void* Context); +static void mgsl_bh_receive(struct mgsl_struct *info); +static void mgsl_bh_transmit(struct mgsl_struct *info); +static void mgsl_bh_status(struct mgsl_struct *info); + +/* + * Interrupt handler routines and dispatch table. + */ +static void mgsl_isr_null( struct mgsl_struct *info ); +static void mgsl_isr_transmit_data( struct mgsl_struct *info ); +static void mgsl_isr_receive_data( struct mgsl_struct *info ); +static void mgsl_isr_receive_status( struct mgsl_struct *info ); +static void mgsl_isr_transmit_status( struct mgsl_struct *info ); +static void mgsl_isr_io_pin( struct mgsl_struct *info ); +static void mgsl_isr_misc( struct mgsl_struct *info ); +static void mgsl_isr_receive_dma( struct mgsl_struct *info ); +static void mgsl_isr_transmit_dma( struct mgsl_struct *info ); + +typedef void (*isr_dispatch_func)(struct mgsl_struct *); + +static isr_dispatch_func UscIsrTable[7] = +{ + mgsl_isr_null, + mgsl_isr_misc, + mgsl_isr_io_pin, + mgsl_isr_transmit_data, + mgsl_isr_transmit_status, + mgsl_isr_receive_data, + mgsl_isr_receive_status +}; + +/* + * ioctl call handlers + */ +static int tiocmget(struct tty_struct *tty, struct file *file); +static int tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount + __user *user_icount); +static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params); +static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params); +static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode); +static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode); +static int mgsl_txenable(struct mgsl_struct * info, int enable); +static int mgsl_txabort(struct mgsl_struct * info); +static int mgsl_rxenable(struct mgsl_struct * info, int enable); +static int mgsl_wait_event(struct mgsl_struct * info, int __user *mask); +static int mgsl_loopmode_send_done( struct mgsl_struct * info ); + +/* set non-zero on successful registration with PCI subsystem */ +static int pci_registered; + +/* + * Global linked list of SyncLink devices + */ +static struct mgsl_struct *mgsl_device_list; +static int mgsl_device_count; + +/* + * Set this param to non-zero to load eax with the + * .text section address and breakpoint on module load. + * This is useful for use with gdb and add-symbol-file command. + */ +static int break_on_load; + +/* + * Driver major number, defaults to zero to get auto + * assigned major number. May be forced as module parameter. + */ +static int ttymajor; + +/* + * Array of user specified options for ISA adapters. + */ +static int io[MAX_ISA_DEVICES]; +static int irq[MAX_ISA_DEVICES]; +static int dma[MAX_ISA_DEVICES]; +static int debug_level; +static int maxframe[MAX_TOTAL_DEVICES]; +static int dosyncppp[MAX_TOTAL_DEVICES]; +static int txdmabufs[MAX_TOTAL_DEVICES]; +static int txholdbufs[MAX_TOTAL_DEVICES]; + +module_param(break_on_load, bool, 0); +module_param(ttymajor, int, 0); +module_param_array(io, int, NULL, 0); +module_param_array(irq, int, NULL, 0); +module_param_array(dma, int, NULL, 0); +module_param(debug_level, int, 0); +module_param_array(maxframe, int, NULL, 0); +module_param_array(dosyncppp, int, NULL, 0); +module_param_array(txdmabufs, int, NULL, 0); +module_param_array(txholdbufs, int, NULL, 0); + +static char *driver_name = "SyncLink serial driver"; +static char *driver_version = "$Revision: 4.28 $"; + +static int synclink_init_one (struct pci_dev *dev, + const struct pci_device_id *ent); +static void synclink_remove_one (struct pci_dev *dev); + +static struct pci_device_id synclink_pci_tbl[] = { + { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_USC, PCI_ANY_ID, PCI_ANY_ID, }, + { PCI_VENDOR_ID_MICROGATE, 0x0210, PCI_ANY_ID, PCI_ANY_ID, }, + { 0, }, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, synclink_pci_tbl); + +MODULE_LICENSE("GPL"); + +static struct pci_driver synclink_pci_driver = { + .name = "synclink", + .id_table = synclink_pci_tbl, + .probe = synclink_init_one, + .remove = __devexit_p(synclink_remove_one), +}; + +static struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + + +static void mgsl_change_params(struct mgsl_struct *info); +static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout); + +/* + * 1st function defined in .text section. Calling this function in + * init_module() followed by a breakpoint allows a remote debugger + * (gdb) to get the .text address for the add-symbol-file command. + * This allows remote debugging of dynamically loadable modules. + */ +static void* mgsl_get_text_ptr(void) +{ + return mgsl_get_text_ptr; +} + +/* + * tmp_buf is used as a temporary buffer by mgsl_write. We need to + * lock it in case the COPY_FROM_USER blocks while swapping in a page, + * and some other program tries to do a serial write at the same time. + * Since the lock will only come under contention when the system is + * swapping and available memory is low, it makes sense to share one + * buffer across all the serial ioports, since it significantly saves + * memory if large numbers of serial ports are open. + */ +static unsigned char *tmp_buf; +static DECLARE_MUTEX(tmp_buf_sem); + +static inline int mgsl_paranoia_check(struct mgsl_struct *info, + char *name, const char *routine) +{ +#ifdef MGSL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for mgsl struct (%s) in %s\n"; + static const char *badinfo = + "Warning: null mgsl_struct for (%s) in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != MGSL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#else + if (!info) + return 1; +#endif + return 0; +} + +/** + * line discipline callback wrappers + * + * The wrappers maintain line discipline references + * while calling into the line discipline. + * + * ldisc_receive_buf - pass receive data to line discipline + */ + +static void ldisc_receive_buf(struct tty_struct *tty, + const __u8 *data, char *flags, int count) +{ + struct tty_ldisc *ld; + if (!tty) + return; + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->receive_buf) + ld->receive_buf(tty, data, flags, count); + tty_ldisc_deref(ld); + } +} + +/* mgsl_stop() throttle (stop) transmitter + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_stop(struct tty_struct *tty) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_stop")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("mgsl_stop(%s)\n",info->device_name); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (info->tx_enabled) + usc_stop_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_stop() */ + +/* mgsl_start() release (start) transmitter + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_start(struct tty_struct *tty) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_start")) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("mgsl_start(%s)\n",info->device_name); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_enabled) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_start() */ + +/* + * Bottom half work queue access functions + */ + +/* mgsl_bh_action() Return next bottom half action to perform. + * Return Value: BH action code or 0 if nothing to do. + */ +static int mgsl_bh_action(struct mgsl_struct *info) +{ + unsigned long flags; + int rc = 0; + + spin_lock_irqsave(&info->irq_spinlock,flags); + + if (info->pending_bh & BH_RECEIVE) { + info->pending_bh &= ~BH_RECEIVE; + rc = BH_RECEIVE; + } else if (info->pending_bh & BH_TRANSMIT) { + info->pending_bh &= ~BH_TRANSMIT; + rc = BH_TRANSMIT; + } else if (info->pending_bh & BH_STATUS) { + info->pending_bh &= ~BH_STATUS; + rc = BH_STATUS; + } + + if (!rc) { + /* Mark BH routine as complete */ + info->bh_running = 0; + info->bh_requested = 0; + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return rc; +} + +/* + * Perform bottom half processing of work items queued by ISR. + */ +static void mgsl_bh_handler(void* Context) +{ + struct mgsl_struct *info = (struct mgsl_struct*)Context; + int action; + + if (!info) + return; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_handler(%s) entry\n", + __FILE__,__LINE__,info->device_name); + + info->bh_running = 1; + + while((action = mgsl_bh_action(info)) != 0) { + + /* Process work item */ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_handler() work item action=%d\n", + __FILE__,__LINE__,action); + + switch (action) { + + case BH_RECEIVE: + mgsl_bh_receive(info); + break; + case BH_TRANSMIT: + mgsl_bh_transmit(info); + break; + case BH_STATUS: + mgsl_bh_status(info); + break; + default: + /* unknown work item ID */ + printk("Unknown work item ID=%08X!\n", action); + break; + } + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_handler(%s) exit\n", + __FILE__,__LINE__,info->device_name); +} + +static void mgsl_bh_receive(struct mgsl_struct *info) +{ + int (*get_rx_frame)(struct mgsl_struct *info) = + (info->params.mode == MGSL_MODE_HDLC ? mgsl_get_rx_frame : mgsl_get_raw_rx_frame); + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_receive(%s)\n", + __FILE__,__LINE__,info->device_name); + + do + { + if (info->rx_rcc_underrun) { + unsigned long flags; + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return; + } + } while(get_rx_frame(info)); +} + +static void mgsl_bh_transmit(struct mgsl_struct *info) +{ + struct tty_struct *tty = info->tty; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_transmit() entry on %s\n", + __FILE__,__LINE__,info->device_name); + + if (tty) { + tty_wakeup(tty); + wake_up_interruptible(&tty->write_wait); + } + + /* if transmitter idle and loopmode_send_done_requested + * then start echoing RxD to TxD + */ + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( !info->tx_active && info->loopmode_send_done_requested ) + usc_loopmode_send_done( info ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + +static void mgsl_bh_status(struct mgsl_struct *info) +{ + if ( debug_level >= DEBUG_LEVEL_BH ) + printk( "%s(%d):mgsl_bh_status() entry on %s\n", + __FILE__,__LINE__,info->device_name); + + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + info->dcd_chkcount = 0; + info->cts_chkcount = 0; +} + +/* mgsl_isr_receive_status() + * + * Service a receive status interrupt. The type of status + * interrupt is indicated by the state of the RCSR. + * This is only used for HDLC mode. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_receive_status( struct mgsl_struct *info ) +{ + u16 status = usc_InReg( info, RCSR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_receive_status status=%04X\n", + __FILE__,__LINE__,status); + + if ( (status & RXSTATUS_ABORT_RECEIVED) && + info->loopmode_insert_requested && + usc_loopmode_active(info) ) + { + ++info->icount.rxabort; + info->loopmode_insert_requested = FALSE; + + /* clear CMR:13 to start echoing RxD to TxD */ + info->cmr_value &= ~BIT13; + usc_OutReg(info, CMR, info->cmr_value); + + /* disable received abort irq (no longer required) */ + usc_OutReg(info, RICR, + (usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED)); + } + + if (status & (RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)) { + if (status & RXSTATUS_EXITED_HUNT) + info->icount.exithunt++; + if (status & RXSTATUS_IDLE_RECEIVED) + info->icount.rxidle++; + wake_up_interruptible(&info->event_wait_q); + } + + if (status & RXSTATUS_OVERRUN){ + info->icount.rxover++; + usc_process_rxoverrun_sync( info ); + } + + usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); + usc_UnlatchRxstatusBits( info, status ); + +} /* end of mgsl_isr_receive_status() */ + +/* mgsl_isr_transmit_status() + * + * Service a transmit status interrupt + * HDLC mode :end of transmit frame + * Async mode:all data is sent + * transmit status is indicated by bits in the TCSR. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_transmit_status( struct mgsl_struct *info ) +{ + u16 status = usc_InReg( info, TCSR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_transmit_status status=%04X\n", + __FILE__,__LINE__,status); + + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + usc_UnlatchTxstatusBits( info, status ); + + if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) ) + { + /* finished sending HDLC abort. This may leave */ + /* the TxFifo with data from the aborted frame */ + /* so purge the TxFifo. Also shutdown the DMA */ + /* channel in case there is data remaining in */ + /* the DMA buffer */ + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + } + + if ( status & TXSTATUS_EOF_SENT ) + info->icount.txok++; + else if ( status & TXSTATUS_UNDERRUN ) + info->icount.txunder++; + else if ( status & TXSTATUS_ABORT_SENT ) + info->icount.txabort++; + else + info->icount.txunder++; + + info->tx_active = 0; + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + del_timer(&info->tx_timer); + + if ( info->drop_rts_on_tx_done ) { + usc_get_serial_signals( info ); + if ( info->serial_signals & SerialSignal_RTS ) { + info->serial_signals &= ~SerialSignal_RTS; + usc_set_serial_signals( info ); + } + info->drop_rts_on_tx_done = 0; + } + +#ifdef CONFIG_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + { + if (info->tty->stopped || info->tty->hw_stopped) { + usc_stop_transmitter(info); + return; + } + info->pending_bh |= BH_TRANSMIT; + } + +} /* end of mgsl_isr_transmit_status() */ + +/* mgsl_isr_io_pin() + * + * Service an Input/Output pin interrupt. The type of + * interrupt is indicated by bits in the MISR + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_io_pin( struct mgsl_struct *info ) +{ + struct mgsl_icount *icount; + u16 status = usc_InReg( info, MISR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_io_pin status=%04X\n", + __FILE__,__LINE__,status); + + usc_ClearIrqPendingBits( info, IO_PIN ); + usc_UnlatchIostatusBits( info, status ); + + if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED | + MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) { + icount = &info->icount; + /* update input line counters */ + if (status & MISCSTATUS_RI_LATCHED) { + if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_RI); + icount->rng++; + if ( status & MISCSTATUS_RI ) + info->input_signal_events.ri_up++; + else + info->input_signal_events.ri_down++; + } + if (status & MISCSTATUS_DSR_LATCHED) { + if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_DSR); + icount->dsr++; + if ( status & MISCSTATUS_DSR ) + info->input_signal_events.dsr_up++; + else + info->input_signal_events.dsr_down++; + } + if (status & MISCSTATUS_DCD_LATCHED) { + if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_DCD); + icount->dcd++; + if (status & MISCSTATUS_DCD) { + info->input_signal_events.dcd_up++; + } else + info->input_signal_events.dcd_down++; +#ifdef CONFIG_HDLC + if (info->netcount) + hdlc_set_carrier(status & MISCSTATUS_DCD, info->netdev); +#endif + } + if (status & MISCSTATUS_CTS_LATCHED) + { + if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) + usc_DisablestatusIrqs(info,SICR_CTS); + icount->cts++; + if ( status & MISCSTATUS_CTS ) + info->input_signal_events.cts_up++; + else + info->input_signal_events.cts_down++; + } + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + if ( (info->flags & ASYNC_CHECK_CD) && + (status & MISCSTATUS_DCD_LATCHED) ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s CD now %s...", info->device_name, + (status & MISCSTATUS_DCD) ? "on" : "off"); + if (status & MISCSTATUS_DCD) + wake_up_interruptible(&info->open_wait); + else { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("doing serial hangup..."); + if (info->tty) + tty_hangup(info->tty); + } + } + + if ( (info->flags & ASYNC_CTS_FLOW) && + (status & MISCSTATUS_CTS_LATCHED) ) { + if (info->tty->hw_stopped) { + if (status & MISCSTATUS_CTS) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx start..."); + if (info->tty) + info->tty->hw_stopped = 0; + usc_start_transmitter(info); + info->pending_bh |= BH_TRANSMIT; + return; + } + } else { + if (!(status & MISCSTATUS_CTS)) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("CTS tx stop..."); + if (info->tty) + info->tty->hw_stopped = 1; + usc_stop_transmitter(info); + } + } + } + } + + info->pending_bh |= BH_STATUS; + + /* for diagnostics set IRQ flag */ + if ( status & MISCSTATUS_TXC_LATCHED ){ + usc_OutReg( info, SICR, + (unsigned short)(usc_InReg(info,SICR) & ~(SICR_TXC_ACTIVE+SICR_TXC_INACTIVE)) ); + usc_UnlatchIostatusBits( info, MISCSTATUS_TXC_LATCHED ); + info->irq_occurred = 1; + } + +} /* end of mgsl_isr_io_pin() */ + +/* mgsl_isr_transmit_data() + * + * Service a transmit data interrupt (async mode only). + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_transmit_data( struct mgsl_struct *info ) +{ + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n", + __FILE__,__LINE__,info->xmit_cnt); + + usc_ClearIrqPendingBits( info, TRANSMIT_DATA ); + + if (info->tty->stopped || info->tty->hw_stopped) { + usc_stop_transmitter(info); + return; + } + + if ( info->xmit_cnt ) + usc_load_txfifo( info ); + else + info->tx_active = 0; + + if (info->xmit_cnt < WAKEUP_CHARS) + info->pending_bh |= BH_TRANSMIT; + +} /* end of mgsl_isr_transmit_data() */ + +/* mgsl_isr_receive_data() + * + * Service a receive data interrupt. This occurs + * when operating in asynchronous interrupt transfer mode. + * The receive data FIFO is flushed to the receive data buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_receive_data( struct mgsl_struct *info ) +{ + int Fifocount; + u16 status; + unsigned char DataByte; + struct tty_struct *tty = info->tty; + struct mgsl_icount *icount = &info->icount; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_receive_data\n", + __FILE__,__LINE__); + + usc_ClearIrqPendingBits( info, RECEIVE_DATA ); + + /* select FIFO status for RICR readback */ + usc_RCmd( info, RCmd_SelectRicrRxFifostatus ); + + /* clear the Wordstatus bit so that status readback */ + /* only reflects the status of this byte */ + usc_OutReg( info, RICR+LSBONLY, (u16)(usc_InReg(info, RICR+LSBONLY) & ~BIT3 )); + + /* flush the receive FIFO */ + + while( (Fifocount = (usc_InReg(info,RICR) >> 8)) ) { + /* read one byte from RxFIFO */ + outw( (inw(info->io_base + CCAR) & 0x0780) | (RDR+LSBONLY), + info->io_base + CCAR ); + DataByte = inb( info->io_base + CCAR ); + + /* get the status of the received byte */ + status = usc_InReg(info, RCSR); + if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR + + RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) + usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + continue; + + *tty->flip.char_buf_ptr = DataByte; + icount->rx++; + + *tty->flip.flag_buf_ptr = 0; + if ( status & (RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR + + RXSTATUS_OVERRUN + RXSTATUS_BREAK_RECEIVED) ) { + printk("rxerr=%04X\n",status); + /* update error statistics */ + if ( status & RXSTATUS_BREAK_RECEIVED ) { + status &= ~(RXSTATUS_FRAMING_ERROR + RXSTATUS_PARITY_ERROR); + icount->brk++; + } else if (status & RXSTATUS_PARITY_ERROR) + icount->parity++; + else if (status & RXSTATUS_FRAMING_ERROR) + icount->frame++; + else if (status & RXSTATUS_OVERRUN) { + /* must issue purge fifo cmd before */ + /* 16C32 accepts more receive chars */ + usc_RTCmd(info,RTCmd_PurgeRxFifo); + icount->overrun++; + } + + /* discard char if tty control flags say so */ + if (status & info->ignore_status_mask) + continue; + + status &= info->read_status_mask; + + if (status & RXSTATUS_BREAK_RECEIVED) { + *tty->flip.flag_buf_ptr = TTY_BREAK; + if (info->flags & ASYNC_SAK) + do_SAK(tty); + } else if (status & RXSTATUS_PARITY_ERROR) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (status & RXSTATUS_FRAMING_ERROR) + *tty->flip.flag_buf_ptr = TTY_FRAME; + if (status & RXSTATUS_OVERRUN) { + /* Overrun is special, since it's + * reported immediately, and doesn't + * affect the current character + */ + if (tty->flip.count < TTY_FLIPBUF_SIZE) { + tty->flip.count++; + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + *tty->flip.flag_buf_ptr = TTY_OVERRUN; + } + } + } /* end of if (error) */ + + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + + if ( debug_level >= DEBUG_LEVEL_ISR ) { + printk("%s(%d):mgsl_isr_receive_data flip count=%d\n", + __FILE__,__LINE__,tty->flip.count); + printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n", + __FILE__,__LINE__,icount->rx,icount->brk, + icount->parity,icount->frame,icount->overrun); + } + + if ( tty->flip.count ) + tty_flip_buffer_push(tty); +} + +/* mgsl_isr_misc() + * + * Service a miscellaneos interrupt source. + * + * Arguments: info pointer to device extension (instance data) + * Return Value: None + */ +static void mgsl_isr_misc( struct mgsl_struct *info ) +{ + u16 status = usc_InReg( info, MISR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_misc status=%04X\n", + __FILE__,__LINE__,status); + + if ((status & MISCSTATUS_RCC_UNDERRUN) && + (info->params.mode == MGSL_MODE_HDLC)) { + + /* turn off receiver and rx DMA */ + usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); + usc_DmaCmd(info, DmaCmd_ResetRxChannel); + usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); + usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS); + usc_DisableInterrupts(info, RECEIVE_DATA + RECEIVE_STATUS); + + /* schedule BH handler to restart receiver */ + info->pending_bh |= BH_RECEIVE; + info->rx_rcc_underrun = 1; + } + + usc_ClearIrqPendingBits( info, MISC ); + usc_UnlatchMiscstatusBits( info, status ); + +} /* end of mgsl_isr_misc() */ + +/* mgsl_isr_null() + * + * Services undefined interrupt vectors from the + * USC. (hence this function SHOULD never be called) + * + * Arguments: info pointer to device extension (instance data) + * Return Value: None + */ +static void mgsl_isr_null( struct mgsl_struct *info ) +{ + +} /* end of mgsl_isr_null() */ + +/* mgsl_isr_receive_dma() + * + * Service a receive DMA channel interrupt. + * For this driver there are two sources of receive DMA interrupts + * as identified in the Receive DMA mode Register (RDMR): + * + * BIT3 EOA/EOL End of List, all receive buffers in receive + * buffer list have been filled (no more free buffers + * available). The DMA controller has shut down. + * + * BIT2 EOB End of Buffer. This interrupt occurs when a receive + * DMA buffer is terminated in response to completion + * of a good frame or a frame with errors. The status + * of the frame is stored in the buffer entry in the + * list of receive buffer entries. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_receive_dma( struct mgsl_struct *info ) +{ + u16 status; + + /* clear interrupt pending and IUS bit for Rx DMA IRQ */ + usc_OutDmaReg( info, CDIR, BIT9+BIT1 ); + + /* Read the receive DMA status to identify interrupt type. */ + /* This also clears the status bits. */ + status = usc_InDmaReg( info, RDMR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n", + __FILE__,__LINE__,info->device_name,status); + + info->pending_bh |= BH_RECEIVE; + + if ( status & BIT3 ) { + info->rx_overflow = 1; + info->icount.buf_overrun++; + } + +} /* end of mgsl_isr_receive_dma() */ + +/* mgsl_isr_transmit_dma() + * + * This function services a transmit DMA channel interrupt. + * + * For this driver there is one source of transmit DMA interrupts + * as identified in the Transmit DMA Mode Register (TDMR): + * + * BIT2 EOB End of Buffer. This interrupt occurs when a + * transmit DMA buffer has been emptied. + * + * The driver maintains enough transmit DMA buffers to hold at least + * one max frame size transmit frame. When operating in a buffered + * transmit mode, there may be enough transmit DMA buffers to hold at + * least two or more max frame size frames. On an EOB condition, + * determine if there are any queued transmit buffers and copy into + * transmit DMA buffers if we have room. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_isr_transmit_dma( struct mgsl_struct *info ) +{ + u16 status; + + /* clear interrupt pending and IUS bit for Tx DMA IRQ */ + usc_OutDmaReg(info, CDIR, BIT8+BIT0 ); + + /* Read the transmit DMA status to identify interrupt type. */ + /* This also clears the status bits. */ + + status = usc_InDmaReg( info, TDMR ); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_isr_transmit_dma(%s) status=%04X\n", + __FILE__,__LINE__,info->device_name,status); + + if ( status & BIT2 ) { + --info->tx_dma_buffers_used; + + /* if there are transmit frames queued, + * try to load the next one + */ + if ( load_next_tx_holding_buffer(info) ) { + /* if call returns non-zero value, we have + * at least one free tx holding buffer + */ + info->pending_bh |= BH_TRANSMIT; + } + } + +} /* end of mgsl_isr_transmit_dma() */ + +/* mgsl_interrupt() + * + * Interrupt service routine entry point. + * + * Arguments: + * + * irq interrupt number that caused interrupt + * dev_id device ID supplied during interrupt registration + * regs interrupted processor context + * + * Return Value: None + */ +static irqreturn_t mgsl_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct mgsl_struct * info; + u16 UscVector; + u16 DmaVector; + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_interrupt(%d)entry.\n", + __FILE__,__LINE__,irq); + + info = (struct mgsl_struct *)dev_id; + if (!info) + return IRQ_NONE; + + spin_lock(&info->irq_spinlock); + + for(;;) { + /* Read the interrupt vectors from hardware. */ + UscVector = usc_InReg(info, IVR) >> 9; + DmaVector = usc_InDmaReg(info, DIVR); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n", + __FILE__,__LINE__,info->device_name,UscVector,DmaVector); + + if ( !UscVector && !DmaVector ) + break; + + /* Dispatch interrupt vector */ + if ( UscVector ) + (*UscIsrTable[UscVector])(info); + else if ( (DmaVector&(BIT10|BIT9)) == BIT10) + mgsl_isr_transmit_dma(info); + else + mgsl_isr_receive_dma(info); + + if ( info->isr_overflow ) { + printk(KERN_ERR"%s(%d):%s isr overflow irq=%d\n", + __FILE__,__LINE__,info->device_name, irq); + usc_DisableMasterIrqBit(info); + usc_DisableDmaInterrupts(info,DICR_MASTER); + break; + } + } + + /* Request bottom half processing if there's something + * for it to do and the bh is not already running + */ + + if ( info->pending_bh && !info->bh_running && !info->bh_requested ) { + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):%s queueing bh task.\n", + __FILE__,__LINE__,info->device_name); + schedule_work(&info->task); + info->bh_requested = 1; + } + + spin_unlock(&info->irq_spinlock); + + if ( debug_level >= DEBUG_LEVEL_ISR ) + printk("%s(%d):mgsl_interrupt(%d)exit.\n", + __FILE__,__LINE__,irq); + return IRQ_HANDLED; +} /* end of mgsl_interrupt() */ + +/* startup() + * + * Initialize and start device. + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error code + */ +static int startup(struct mgsl_struct * info) +{ + int retval = 0; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):mgsl_startup(%s)\n",__FILE__,__LINE__,info->device_name); + + if (info->flags & ASYNC_INITIALIZED) + return 0; + + if (!info->xmit_buf) { + /* allocate a page of memory for a transmit buffer */ + info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); + if (!info->xmit_buf) { + printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n", + __FILE__,__LINE__,info->device_name); + return -ENOMEM; + } + } + + info->pending_bh = 0; + + init_timer(&info->tx_timer); + info->tx_timer.data = (unsigned long)info; + info->tx_timer.function = mgsl_tx_timeout; + + /* Allocate and claim adapter resources */ + retval = mgsl_claim_resources(info); + + /* perform existence check and diagnostics */ + if ( !retval ) + retval = mgsl_adapter_test(info); + + if ( retval ) { + if (capable(CAP_SYS_ADMIN) && info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + mgsl_release_resources(info); + return retval; + } + + /* program hardware for current parameters */ + mgsl_change_params(info); + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags |= ASYNC_INITIALIZED; + + return 0; + +} /* end of startup() */ + +/* shutdown() + * + * Called by mgsl_close() and mgsl_hangup() to shutdown hardware + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void shutdown(struct mgsl_struct * info) +{ + unsigned long flags; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_shutdown(%s)\n", + __FILE__,__LINE__, info->device_name ); + + /* clear status wait queue because status changes */ + /* can't happen after shutting down the hardware */ + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + del_timer(&info->tx_timer); + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = NULL; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_DisableMasterIrqBit(info); + usc_stop_receiver(info); + usc_stop_transmitter(info); + usc_DisableInterrupts(info,RECEIVE_DATA + RECEIVE_STATUS + + TRANSMIT_DATA + TRANSMIT_STATUS + IO_PIN + MISC ); + usc_DisableDmaInterrupts(info,DICR_MASTER + DICR_TRANSMIT + DICR_RECEIVE); + + /* Disable DMAEN (Port 7, Bit 14) */ + /* This disconnects the DMA request signal from the ISA bus */ + /* on the ISA adapter. This has no effect for the PCI adapter */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) | BIT14)); + + /* Disable INTEN (Port 6, Bit12) */ + /* This disconnects the IRQ request signal to the ISA bus */ + /* on the ISA adapter. This has no effect for the PCI adapter */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) | BIT12)); + + if (!info->tty || info->tty->termios->c_cflag & HUPCL) { + info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + usc_set_serial_signals(info); + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + mgsl_release_resources(info); + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; + +} /* end of shutdown() */ + +static void mgsl_program_hw(struct mgsl_struct *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + + usc_stop_receiver(info); + usc_stop_transmitter(info); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + if (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW || + info->netcount) + usc_set_sync_mode(info); + else + usc_set_async_mode(info); + + usc_set_serial_signals(info); + + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + + usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI); + usc_EnableInterrupts(info, IO_PIN); + usc_get_serial_signals(info); + + if (info->netcount || info->tty->termios->c_cflag & CREAD) + usc_start_receiver(info); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); +} + +/* Reconfigure adapter based on new parameters + */ +static void mgsl_change_params(struct mgsl_struct *info) +{ + unsigned cflag; + int bits_per_char; + + if (!info->tty || !info->tty->termios) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_change_params(%s)\n", + __FILE__,__LINE__, info->device_name ); + + cflag = info->tty->termios->c_cflag; + + /* if B0 rate (hangup) specified then negate DTR and RTS */ + /* otherwise assert DTR and RTS */ + if (cflag & CBAUD) + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + + /* byte size and parity */ + + switch (cflag & CSIZE) { + case CS5: info->params.data_bits = 5; break; + case CS6: info->params.data_bits = 6; break; + case CS7: info->params.data_bits = 7; break; + case CS8: info->params.data_bits = 8; break; + /* Never happens, but GCC is too dumb to figure it out */ + default: info->params.data_bits = 7; break; + } + + if (cflag & CSTOPB) + info->params.stop_bits = 2; + else + info->params.stop_bits = 1; + + info->params.parity = ASYNC_PARITY_NONE; + if (cflag & PARENB) { + if (cflag & PARODD) + info->params.parity = ASYNC_PARITY_ODD; + else + info->params.parity = ASYNC_PARITY_EVEN; +#ifdef CMSPAR + if (cflag & CMSPAR) + info->params.parity = ASYNC_PARITY_SPACE; +#endif + } + + /* calculate number of jiffies to transmit a full + * FIFO (32 bytes) at specified data rate + */ + bits_per_char = info->params.data_bits + + info->params.stop_bits + 1; + + /* if port data rate is set to 460800 or less then + * allow tty settings to override, otherwise keep the + * current data rate. + */ + if (info->params.data_rate <= 460800) + info->params.data_rate = tty_get_baud_rate(info->tty); + + if ( info->params.data_rate ) { + info->timeout = (32*HZ*bits_per_char) / + info->params.data_rate; + } + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + if (cflag & CRTSCTS) + info->flags |= ASYNC_CTS_FLOW; + else + info->flags &= ~ASYNC_CTS_FLOW; + + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; + + /* process tty input control flags */ + + info->read_status_mask = RXSTATUS_OVERRUN; + if (I_INPCK(info->tty)) + info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; + if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + info->read_status_mask |= RXSTATUS_BREAK_RECEIVED; + + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR; + if (I_IGNBRK(info->tty)) { + info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED; + /* If ignoring parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= RXSTATUS_OVERRUN; + } + + mgsl_program_hw(info); + +} /* end of mgsl_change_params() */ + +/* mgsl_put_char() + * + * Add a character to the transmit buffer. + * + * Arguments: tty pointer to tty information structure + * ch character to add to transmit buffer + * + * Return Value: None + */ +static void mgsl_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) { + printk( "%s(%d):mgsl_put_char(%d) on %s\n", + __FILE__,__LINE__,ch,info->device_name); + } + + if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char")) + return; + + if (!tty || !info->xmit_buf) + return; + + spin_lock_irqsave(&info->irq_spinlock,flags); + + if ( (info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active ) { + + if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) { + info->xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= SERIAL_XMIT_SIZE-1; + info->xmit_cnt++; + } + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_put_char() */ + +/* mgsl_flush_chars() + * + * Enable transmitter so remaining characters in the + * transmit buffer are sent. + * + * Arguments: tty pointer to tty information structure + * Return Value: None + */ +static void mgsl_flush_chars(struct tty_struct *tty) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n", + __FILE__,__LINE__,info->device_name,info->xmit_cnt); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars")) + return; + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) + return; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_flush_chars() entry on %s starting transmitter\n", + __FILE__,__LINE__,info->device_name ); + + spin_lock_irqsave(&info->irq_spinlock,flags); + + if (!info->tx_active) { + if ( (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) { + /* operating in synchronous (frame oriented) mode */ + /* copy data from circular xmit_buf to */ + /* transmit DMA buffer. */ + mgsl_load_tx_dma_buffer(info, + info->xmit_buf,info->xmit_cnt); + } + usc_start_transmitter(info); + } + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_flush_chars() */ + +/* mgsl_write() + * + * Send a block of data + * + * Arguments: + * + * tty pointer to tty information structure + * buf pointer to buffer containing send data + * count size of send data in bytes + * + * Return Value: number of characters written + */ +static int mgsl_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, ret = 0; + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) count=%d\n", + __FILE__,__LINE__,info->device_name,count); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_write")) + goto cleanup; + + if (!tty || !info->xmit_buf || !tmp_buf) + goto cleanup; + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* operating in synchronous (frame oriented) mode */ + /* operating in synchronous (frame oriented) mode */ + if (info->tx_active) { + + if ( info->params.mode == MGSL_MODE_HDLC ) { + ret = 0; + goto cleanup; + } + /* transmitter is actively sending data - + * if we have multiple transmit dma and + * holding buffers, attempt to queue this + * frame for transmission at a later time. + */ + if (info->tx_holding_count >= info->num_tx_holding_buffers ) { + /* no tx holding buffers available */ + ret = 0; + goto cleanup; + } + + /* queue transmit frame request */ + ret = count; + save_tx_buffer_request(info,buf,count); + + /* if we have sufficient tx dma buffers, + * load the next buffered tx request + */ + spin_lock_irqsave(&info->irq_spinlock,flags); + load_next_tx_holding_buffer(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + goto cleanup; + } + + /* if operating in HDLC LoopMode and the adapter */ + /* has yet to be inserted into the loop, we can't */ + /* transmit */ + + if ( (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) && + !usc_loopmode_active(info) ) + { + ret = 0; + goto cleanup; + } + + if ( info->xmit_cnt ) { + /* Send accumulated from send_char() calls */ + /* as frame and wait before accepting more data. */ + ret = 0; + + /* copy data from circular xmit_buf to */ + /* transmit DMA buffer. */ + mgsl_load_tx_dma_buffer(info, + info->xmit_buf,info->xmit_cnt); + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) sync xmit_cnt flushing\n", + __FILE__,__LINE__,info->device_name); + } else { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) sync transmit accepted\n", + __FILE__,__LINE__,info->device_name); + ret = count; + info->xmit_cnt = count; + mgsl_load_tx_dma_buffer(info,buf,count); + } + } else { + while (1) { + spin_lock_irqsave(&info->irq_spinlock,flags); + c = min_t(int, count, + min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) { + spin_unlock_irqrestore(&info->irq_spinlock,flags); + break; + } + memcpy(info->xmit_buf + info->xmit_head, buf, c); + info->xmit_head = ((info->xmit_head + c) & + (SERIAL_XMIT_SIZE-1)); + info->xmit_cnt += c; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + buf += c; + count -= c; + ret += c; + } + } + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_active) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +cleanup: + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_write(%s) returning=%d\n", + __FILE__,__LINE__,info->device_name,ret); + + return ret; + +} /* end of mgsl_write() */ + +/* mgsl_write_room() + * + * Return the count of free bytes in transmit buffer + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static int mgsl_write_room(struct tty_struct *tty) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + int ret; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_write_room(%s)=%d\n", + __FILE__,__LINE__, info->device_name,ret ); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* operating in synchronous (frame oriented) mode */ + if ( info->tx_active ) + return 0; + else + return HDLC_MAX_FRAME_SIZE; + } + + return ret; + +} /* end of mgsl_write_room() */ + +/* mgsl_chars_in_buffer() + * + * Return the count of bytes in transmit buffer + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static int mgsl_chars_in_buffer(struct tty_struct *tty) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_chars_in_buffer(%s)\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer")) + return 0; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n", + __FILE__,__LINE__, info->device_name,info->xmit_cnt ); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* operating in synchronous (frame oriented) mode */ + if ( info->tx_active ) + return info->max_frame_size; + else + return 0; + } + + return info->xmit_cnt; +} /* end of mgsl_chars_in_buffer() */ + +/* mgsl_flush_buffer() + * + * Discard all data in the send buffer + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_flush_buffer(struct tty_struct *tty) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_flush_buffer(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer")) + return; + + spin_lock_irqsave(&info->irq_spinlock,flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + del_timer(&info->tx_timer); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + wake_up_interruptible(&tty->write_wait); + tty_wakeup(tty); +} + +/* mgsl_send_xchar() + * + * Send a high-priority XON/XOFF character + * + * Arguments: tty pointer to tty info structure + * ch character to send + * Return Value: None + */ +static void mgsl_send_xchar(struct tty_struct *tty, char ch) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_send_xchar(%s,%d)\n", + __FILE__,__LINE__, info->device_name, ch ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar")) + return; + + info->x_char = ch; + if (ch) { + /* Make sure transmit interrupts are on */ + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_enabled) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +} /* end of mgsl_send_xchar() */ + +/* mgsl_throttle() + * + * Signal remote device to throttle send data (our receive data) + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_throttle(struct tty_struct * tty) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_throttle(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle")) + return; + + if (I_IXOFF(tty)) + mgsl_send_xchar(tty, STOP_CHAR(tty)); + + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals &= ~SerialSignal_RTS; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +} /* end of mgsl_throttle() */ + +/* mgsl_unthrottle() + * + * Signal remote device to stop throttling send data (our receive data) + * + * Arguments: tty pointer to tty info structure + * Return Value: None + */ +static void mgsl_unthrottle(struct tty_struct * tty) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_unthrottle(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + mgsl_send_xchar(tty, START_CHAR(tty)); + } + + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals |= SerialSignal_RTS; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + +} /* end of mgsl_unthrottle() */ + +/* mgsl_get_stats() + * + * get the current serial parameters information + * + * Arguments: info pointer to device instance data + * user_icount pointer to buffer to hold returned stats + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_get_params(%s)\n", + __FILE__,__LINE__, info->device_name); + + COPY_TO_USER(err,user_icount, &info->icount, sizeof(struct mgsl_icount)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_get_stats(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; + +} /* end of mgsl_get_stats() */ + +/* mgsl_get_params() + * + * get the current serial parameters information + * + * Arguments: info pointer to device instance data + * user_params pointer to buffer to hold returned params + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params) +{ + int err; + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_get_params(%s)\n", + __FILE__,__LINE__, info->device_name); + + COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_get_params(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; + +} /* end of mgsl_get_params() */ + +/* mgsl_set_params() + * + * set the serial parameters + * + * Arguments: + * + * info pointer to device instance data + * new_params user buffer containing new serial params + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_params) +{ + unsigned long flags; + MGSL_PARAMS tmp_params; + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__, + info->device_name ); + COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_set_params(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + mgsl_change_params(info); + + return 0; + +} /* end of mgsl_set_params() */ + +/* mgsl_get_txidle() + * + * get the current transmit idle mode + * + * Arguments: info pointer to device instance data + * idle_mode pointer to buffer to hold returned idle mode + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode) +{ + int err; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_get_txidle(%s)=%d\n", + __FILE__,__LINE__, info->device_name, info->idle_mode); + + COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int)); + if (err) { + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_get_txidle(%s) user buffer copy failed\n", + __FILE__,__LINE__,info->device_name); + return -EFAULT; + } + + return 0; + +} /* end of mgsl_get_txidle() */ + +/* mgsl_set_txidle() service ioctl to set transmit idle mode + * + * Arguments: info pointer to device instance data + * idle_mode new idle mode + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__, + info->device_name, idle_mode ); + + spin_lock_irqsave(&info->irq_spinlock,flags); + info->idle_mode = idle_mode; + usc_set_txidle( info ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_set_txidle() */ + +/* mgsl_txenable() + * + * enable or disable the transmitter + * + * Arguments: + * + * info pointer to device instance data + * enable 1 = enable, 0 = disable + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_txenable(struct mgsl_struct * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__, + info->device_name, enable); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( enable ) { + if ( !info->tx_enabled ) { + + usc_start_transmitter(info); + /*-------------------------------------------------- + * if HDLC/SDLC Loop mode, attempt to insert the + * station in the 'loop' by setting CMR:13. Upon + * receipt of the next GoAhead (RxAbort) sequence, + * the OnLoop indicator (CCSR:7) should go active + * to indicate that we are on the loop + *--------------------------------------------------*/ + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + usc_loopmode_insert_request( info ); + } + } else { + if ( info->tx_enabled ) + usc_stop_transmitter(info); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_txenable() */ + +/* mgsl_txabort() abort send HDLC frame + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_txabort(struct mgsl_struct * info) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__, + info->device_name); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) + { + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + usc_loopmode_cancel_transmit( info ); + else + usc_TCmd(info,TCmd_SendAbort); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_txabort() */ + +/* mgsl_rxenable() enable or disable the receiver + * + * Arguments: info pointer to device instance data + * enable 1 = enable, 0 = disable + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_rxenable(struct mgsl_struct * info, int enable) +{ + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__, + info->device_name, enable); + + spin_lock_irqsave(&info->irq_spinlock,flags); + if ( enable ) { + if ( !info->rx_enabled ) + usc_start_receiver(info); + } else { + if ( info->rx_enabled ) + usc_stop_receiver(info); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + return 0; + +} /* end of mgsl_rxenable() */ + +/* mgsl_wait_event() wait for specified event to occur + * + * Arguments: info pointer to device instance data + * mask pointer to bitmask of events to wait for + * Return Value: 0 if successful and bit mask updated with + * of events triggerred, + * otherwise error code + */ +static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr) +{ + unsigned long flags; + int s; + int rc=0; + struct mgsl_icount cprev, cnow; + int events; + int mask; + struct _input_signal_events oldsigs, newsigs; + DECLARE_WAITQUEUE(wait, current); + + COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int)); + if (rc) { + return -EFAULT; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__, + info->device_name, mask); + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* return immediately if state matches requested events */ + usc_get_serial_signals(info); + s = info->serial_signals; + events = mask & + ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); + if (events) { + spin_unlock_irqrestore(&info->irq_spinlock,flags); + goto exit; + } + + /* save current irq counts */ + cprev = info->icount; + oldsigs = info->input_signal_events; + + /* enable hunt and idle irqs if needed */ + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + u16 oldreg = usc_InReg(info,RICR); + u16 newreg = oldreg + + (mask & MgslEvent_ExitHuntMode ? RXSTATUS_EXITED_HUNT:0) + + (mask & MgslEvent_IdleReceived ? RXSTATUS_IDLE_RECEIVED:0); + if (oldreg != newreg) + usc_OutReg(info, RICR, newreg); + } + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&info->event_wait_q, &wait); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get current irq counts */ + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + newsigs = info->input_signal_events; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + /* if no change, wait aborted for some reason */ + if (newsigs.dsr_up == oldsigs.dsr_up && + newsigs.dsr_down == oldsigs.dsr_down && + newsigs.dcd_up == oldsigs.dcd_up && + newsigs.dcd_down == oldsigs.dcd_down && + newsigs.cts_up == oldsigs.cts_up && + newsigs.cts_down == oldsigs.cts_down && + newsigs.ri_up == oldsigs.ri_up && + newsigs.ri_down == oldsigs.ri_down && + cnow.exithunt == cprev.exithunt && + cnow.rxidle == cprev.rxidle) { + rc = -EIO; + break; + } + + events = mask & + ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + + (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + + (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + + (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + + (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + + (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + + (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + + (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + + (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + + (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); + if (events) + break; + + cprev = cnow; + oldsigs = newsigs; + } + + remove_wait_queue(&info->event_wait_q, &wait); + set_current_state(TASK_RUNNING); + + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!waitqueue_active(&info->event_wait_q)) { + /* disable enable exit hunt mode/idle rcvd IRQs */ + usc_OutReg(info, RICR, usc_InReg(info,RICR) & + ~(RXSTATUS_EXITED_HUNT + RXSTATUS_IDLE_RECEIVED)); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } +exit: + if ( rc == 0 ) + PUT_USER(rc, events, mask_ptr); + + return rc; + +} /* end of mgsl_wait_event() */ + +static int modem_input_wait(struct mgsl_struct *info,int arg) +{ + unsigned long flags; + int rc; + struct mgsl_icount cprev, cnow; + DECLARE_WAITQUEUE(wait, current); + + /* save current irq counts */ + spin_lock_irqsave(&info->irq_spinlock,flags); + cprev = info->icount; + add_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get new irq counts */ + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + /* if no change, wait aborted for some reason */ + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; + break; + } + + /* check for change in caller specified modem input */ + if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || + (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || + (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || + (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { + rc = 0; + break; + } + + cprev = cnow; + } + remove_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_RUNNING); + return rc; +} + +/* return the state of the serial control and status signals + */ +static int tiocmget(struct tty_struct *tty, struct file *file) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) + + ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) + + ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) + + ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) + + ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) + + ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmget() value=%08X\n", + __FILE__,__LINE__, info->device_name, result ); + return result; +} + +/* set modem control signals (DTR/RTS) + */ +static int tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):%s tiocmset(%x,%x)\n", + __FILE__,__LINE__,info->device_name, set, clear); + + if (set & TIOCM_RTS) + info->serial_signals |= SerialSignal_RTS; + if (set & TIOCM_DTR) + info->serial_signals |= SerialSignal_DTR; + if (clear & TIOCM_RTS) + info->serial_signals &= ~SerialSignal_RTS; + if (clear & TIOCM_DTR) + info->serial_signals &= ~SerialSignal_DTR; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return 0; +} + +/* mgsl_break() Set or clear transmit break condition + * + * Arguments: tty pointer to tty instance data + * break_state -1=set break condition, 0=clear + * Return Value: None + */ +static void mgsl_break(struct tty_struct *tty, int break_state) +{ + struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_break(%s,%d)\n", + __FILE__,__LINE__, info->device_name, break_state); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_break")) + return; + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (break_state == -1) + usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7)); + else + usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7)); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +} /* end of mgsl_break() */ + +/* mgsl_ioctl() Service an IOCTL request + * + * Arguments: + * + * tty pointer to tty instance data + * file pointer to associated file object for device + * cmd IOCTL command code + * arg command argument/context + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__, + info->device_name, cmd ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + return mgsl_ioctl_common(info, cmd, arg); +} + +static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg) +{ + int error; + struct mgsl_icount cnow; /* kernel counter temps */ + void __user *argp = (void __user *)arg; + struct serial_icounter_struct __user *p_cuser; /* user space */ + unsigned long flags; + + switch (cmd) { + case MGSL_IOCGPARAMS: + return mgsl_get_params(info, argp); + case MGSL_IOCSPARAMS: + return mgsl_set_params(info, argp); + case MGSL_IOCGTXIDLE: + return mgsl_get_txidle(info, argp); + case MGSL_IOCSTXIDLE: + return mgsl_set_txidle(info,(int)arg); + case MGSL_IOCTXENABLE: + return mgsl_txenable(info,(int)arg); + case MGSL_IOCRXENABLE: + return mgsl_rxenable(info,(int)arg); + case MGSL_IOCTXABORT: + return mgsl_txabort(info); + case MGSL_IOCGSTATS: + return mgsl_get_stats(info, argp); + case MGSL_IOCWAITEVENT: + return mgsl_wait_event(info, argp); + case MGSL_IOCLOOPTXDONE: + return mgsl_loopmode_send_done(info); + /* Wait for modem input (DCD,RI,DSR,CTS) change + * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS) + */ + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + case TIOCGICOUNT: + spin_lock_irqsave(&info->irq_spinlock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + p_cuser = argp; + PUT_USER(error,cnow.cts, &p_cuser->cts); + if (error) return error; + PUT_USER(error,cnow.dsr, &p_cuser->dsr); + if (error) return error; + PUT_USER(error,cnow.rng, &p_cuser->rng); + if (error) return error; + PUT_USER(error,cnow.dcd, &p_cuser->dcd); + if (error) return error; + PUT_USER(error,cnow.rx, &p_cuser->rx); + if (error) return error; + PUT_USER(error,cnow.tx, &p_cuser->tx); + if (error) return error; + PUT_USER(error,cnow.frame, &p_cuser->frame); + if (error) return error; + PUT_USER(error,cnow.overrun, &p_cuser->overrun); + if (error) return error; + PUT_USER(error,cnow.parity, &p_cuser->parity); + if (error) return error; + PUT_USER(error,cnow.brk, &p_cuser->brk); + if (error) return error; + PUT_USER(error,cnow.buf_overrun, &p_cuser->buf_overrun); + if (error) return error; + return 0; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +/* mgsl_set_termios() + * + * Set new termios settings + * + * Arguments: + * + * tty pointer to tty structure + * termios pointer to buffer to hold returned old termios + * + * Return Value: None + */ +static void mgsl_set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct mgsl_struct *info = (struct mgsl_struct *)tty->driver_data; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__, + tty->driver->name ); + + /* just return if nothing has changed */ + if ((tty->termios->c_cflag == old_termios->c_cflag) + && (RELEVANT_IFLAG(tty->termios->c_iflag) + == RELEVANT_IFLAG(old_termios->c_iflag))) + return; + + mgsl_change_params(info); + + /* Handle transition to B0 status */ + if (old_termios->c_cflag & CBAUD && + !(tty->termios->c_cflag & CBAUD)) { + info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + tty->termios->c_cflag & CBAUD) { + info->serial_signals |= SerialSignal_DTR; + if (!(tty->termios->c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) { + info->serial_signals |= SerialSignal_RTS; + } + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + + /* Handle turning off CRTSCTS */ + if (old_termios->c_cflag & CRTSCTS && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + mgsl_start(tty); + } + +} /* end of mgsl_set_termios() */ + +/* mgsl_close() + * + * Called when port is closed. Wait for remaining data to be + * sent. Disable port and free resources. + * + * Arguments: + * + * tty pointer to open tty structure + * filp pointer to open file object + * + * Return Value: None + */ +static void mgsl_close(struct tty_struct *tty, struct file * filp) +{ + struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + + if (mgsl_paranoia_check(info, tty->name, "mgsl_close")) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_close(%s) entry, count=%d\n", + __FILE__,__LINE__, info->device_name, info->count); + + if (!info->count) + return; + + if (tty_hung_up_p(filp)) + goto cleanup; + + if ((tty->count == 1) && (info->count != 1)) { + /* + * tty->count is 1 and the tty structure will be freed. + * info->count should be one in this case. + * if it's not, correct it so that the port is shutdown. + */ + printk("mgsl_close: bad refcount; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + + info->count--; + + /* if at least one open remaining, leave hardware active */ + if (info->count) + goto cleanup; + + info->flags |= ASYNC_CLOSING; + + /* set tty->closing to notify line discipline to + * only process XON/XOFF characters. Only the N_TTY + * discipline appears to use this (ppp does not). + */ + tty->closing = 1; + + /* wait for transmit data to clear all layers */ + + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) { + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_close(%s) calling tty_wait_until_sent\n", + __FILE__,__LINE__, info->device_name ); + tty_wait_until_sent(tty, info->closing_wait); + } + + if (info->flags & ASYNC_INITIALIZED) + mgsl_wait_until_sent(tty, info->timeout); + + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + + tty_ldisc_flush(tty); + + shutdown(info); + + tty->closing = 0; + info->tty = NULL; + + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + + wake_up_interruptible(&info->close_wait); + +cleanup: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__, + tty->driver->name, info->count); + +} /* end of mgsl_close() */ + +/* mgsl_wait_until_sent() + * + * Wait until the transmitter is empty. + * + * Arguments: + * + * tty pointer to tty info structure + * timeout time to wait for send completion + * + * Return Value: None + */ +static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (!info ) + return; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_wait_until_sent(%s) entry\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_wait_until_sent")) + return; + + if (!(info->flags & ASYNC_INITIALIZED)) + goto exit; + + orig_jiffies = jiffies; + + /* Set check interval to 1/5 of estimated time to + * send a character, and make it at least 1. The check + * interval should also be less than the timeout. + * Note: use tight timings here to satisfy the NIST-PCTS. + */ + + if ( info->params.data_rate ) { + char_time = info->timeout/(32 * 5); + if (!char_time) + char_time++; + } else + char_time = 1; + + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + while (info->tx_active) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } else { + while (!(usc_InReg(info,TCSR) & TXSTATUS_ALL_SENT) && + info->tx_enabled) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + } + +exit: + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_wait_until_sent(%s) exit\n", + __FILE__,__LINE__, info->device_name ); + +} /* end of mgsl_wait_until_sent() */ + +/* mgsl_hangup() + * + * Called by tty_hangup() when a hangup is signaled. + * This is the same as to closing all open files for the port. + * + * Arguments: tty pointer to associated tty object + * Return Value: None + */ +static void mgsl_hangup(struct tty_struct *tty) +{ + struct mgsl_struct * info = (struct mgsl_struct *)tty->driver_data; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_hangup(%s)\n", + __FILE__,__LINE__, info->device_name ); + + if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup")) + return; + + mgsl_flush_buffer(tty); + shutdown(info); + + info->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = NULL; + + wake_up_interruptible(&info->open_wait); + +} /* end of mgsl_hangup() */ + +/* block_til_ready() + * + * Block the current process until the specified port + * is ready to be opened. + * + * Arguments: + * + * tty pointer to tty info structure + * filp pointer to open file object + * info pointer to device instance data + * + * Return Value: 0 if success, otherwise error code + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct mgsl_struct *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0, extra_count = 0; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready on %s\n", + __FILE__,__LINE__, tty->driver->name ); + + if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ + /* nonblock mode is set or port is not enabled */ + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * mgsl_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&info->open_wait, &wait); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready before block on %s count=%d\n", + __FILE__,__LINE__, tty->driver->name, info->count ); + + spin_lock_irqsave(&info->irq_spinlock, flags); + if (!tty_hung_up_p(filp)) { + extra_count = 1; + info->count--; + } + spin_unlock_irqrestore(&info->irq_spinlock, flags); + info->blocked_open++; + + while (1) { + if (tty->termios->c_cflag & CBAUD) { + spin_lock_irqsave(&info->irq_spinlock,flags); + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + usc_set_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){ + retval = (info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal || (info->serial_signals & SerialSignal_DCD)) ) { + break; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready blocking on %s count=%d\n", + __FILE__,__LINE__, tty->driver->name, info->count ); + + schedule(); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + + if (extra_count) + info->count++; + info->blocked_open--; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready after blocking on %s count=%d\n", + __FILE__,__LINE__, tty->driver->name, info->count ); + + if (!retval) + info->flags |= ASYNC_NORMAL_ACTIVE; + + return retval; + +} /* end of block_til_ready() */ + +/* mgsl_open() + * + * Called when a port is opened. Init and enable port. + * Perform serial-specific initialization for the tty structure. + * + * Arguments: tty pointer to tty info structure + * filp associated file pointer + * + * Return Value: 0 if success, otherwise error code + */ +static int mgsl_open(struct tty_struct *tty, struct file * filp) +{ + struct mgsl_struct *info; + int retval, line; + unsigned long page; + unsigned long flags; + + /* verify range of specified line number */ + line = tty->index; + if ((line < 0) || (line >= mgsl_device_count)) { + printk("%s(%d):mgsl_open with invalid line #%d.\n", + __FILE__,__LINE__,line); + return -ENODEV; + } + + /* find the info structure for the specified line */ + info = mgsl_device_list; + while(info && info->line != line) + info = info->next_device; + if (mgsl_paranoia_check(info, tty->name, "mgsl_open")) + return -ENODEV; + + tty->driver_data = info; + info->tty = tty; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_open(%s), old ref count = %d\n", + __FILE__,__LINE__,tty->driver->name, info->count); + + /* If port is closing, signal caller to try again */ + if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){ + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); + retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); + goto cleanup; + } + + if (!tmp_buf) { + page = get_zeroed_page(GFP_KERNEL); + if (!page) { + retval = -ENOMEM; + goto cleanup; + } + if (tmp_buf) + free_page(page); + else + tmp_buf = (unsigned char *) page; + } + + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + spin_lock_irqsave(&info->netlock, flags); + if (info->netcount) { + retval = -EBUSY; + spin_unlock_irqrestore(&info->netlock, flags); + goto cleanup; + } + info->count++; + spin_unlock_irqrestore(&info->netlock, flags); + + if (info->count == 1) { + /* 1st open on this device, init hardware */ + retval = startup(info); + if (retval < 0) + goto cleanup; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):block_til_ready(%s) returned %d\n", + __FILE__,__LINE__, info->device_name, retval); + goto cleanup; + } + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s(%d):mgsl_open(%s) success\n", + __FILE__,__LINE__, info->device_name); + retval = 0; + +cleanup: + if (retval) { + if (tty->count == 1) + info->tty = NULL; /* tty layer will release tty struct */ + if(info->count) + info->count--; + } + + return retval; + +} /* end of mgsl_open() */ + +/* + * /proc fs routines.... + */ + +static inline int line_info(char *buf, struct mgsl_struct *info) +{ + char stat_buf[30]; + int ret; + unsigned long flags; + + if (info->bus_type == MGSL_BUS_TYPE_PCI) { + ret = sprintf(buf, "%s:PCI io:%04X irq:%d mem:%08X lcr:%08X", + info->device_name, info->io_base, info->irq_level, + info->phys_memory_base, info->phys_lcr_base); + } else { + ret = sprintf(buf, "%s:(E)ISA io:%04X irq:%d dma:%d", + info->device_name, info->io_base, + info->irq_level, info->dma_level); + } + + /* output current serial signal states */ + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (info->serial_signals & SerialSignal_RTS) + strcat(stat_buf, "|RTS"); + if (info->serial_signals & SerialSignal_CTS) + strcat(stat_buf, "|CTS"); + if (info->serial_signals & SerialSignal_DTR) + strcat(stat_buf, "|DTR"); + if (info->serial_signals & SerialSignal_DSR) + strcat(stat_buf, "|DSR"); + if (info->serial_signals & SerialSignal_DCD) + strcat(stat_buf, "|CD"); + if (info->serial_signals & SerialSignal_RI) + strcat(stat_buf, "|RI"); + + if (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + ret += sprintf(buf+ret, " HDLC txok:%d rxok:%d", + info->icount.txok, info->icount.rxok); + if (info->icount.txunder) + ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder); + if (info->icount.txabort) + ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort); + if (info->icount.rxshort) + ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort); + if (info->icount.rxlong) + ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong); + if (info->icount.rxover) + ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover); + if (info->icount.rxcrc) + ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc); + } else { + ret += sprintf(buf+ret, " ASYNC tx:%d rx:%d", + info->icount.tx, info->icount.rx); + if (info->icount.frame) + ret += sprintf(buf+ret, " fe:%d", info->icount.frame); + if (info->icount.parity) + ret += sprintf(buf+ret, " pe:%d", info->icount.parity); + if (info->icount.brk) + ret += sprintf(buf+ret, " brk:%d", info->icount.brk); + if (info->icount.overrun) + ret += sprintf(buf+ret, " oe:%d", info->icount.overrun); + } + + /* Append serial signal status to end */ + ret += sprintf(buf+ret, " %s\n", stat_buf+1); + + ret += sprintf(buf+ret, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + info->tx_active,info->bh_requested,info->bh_running, + info->pending_bh); + + spin_lock_irqsave(&info->irq_spinlock,flags); + { + u16 Tcsr = usc_InReg( info, TCSR ); + u16 Tdmr = usc_InDmaReg( info, TDMR ); + u16 Ticr = usc_InReg( info, TICR ); + u16 Rscr = usc_InReg( info, RCSR ); + u16 Rdmr = usc_InDmaReg( info, RDMR ); + u16 Ricr = usc_InReg( info, RICR ); + u16 Icr = usc_InReg( info, ICR ); + u16 Dccr = usc_InReg( info, DCCR ); + u16 Tmr = usc_InReg( info, TMR ); + u16 Tccr = usc_InReg( info, TCCR ); + u16 Ccar = inw( info->io_base + CCAR ); + ret += sprintf(buf+ret, "tcsr=%04X tdmr=%04X ticr=%04X rcsr=%04X rdmr=%04X\n" + "ricr=%04X icr =%04X dccr=%04X tmr=%04X tccr=%04X ccar=%04X\n", + Tcsr,Tdmr,Ticr,Rscr,Rdmr,Ricr,Icr,Dccr,Tmr,Tccr,Ccar ); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return ret; + +} /* end of line_info() */ + +/* mgsl_read_proc() + * + * Called to print information about devices + * + * Arguments: + * page page of memory to hold returned info + * start + * off + * count + * eof + * data + * + * Return Value: + */ +static int mgsl_read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int len = 0, l; + off_t begin = 0; + struct mgsl_struct *info; + + len += sprintf(page, "synclink driver:%s\n", driver_version); + + info = mgsl_device_list; + while( info ) { + l = line_info(page + len, info); + len += l; + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + info = info->next_device; + } + + *eof = 1; +done: + if (off >= len+begin) + return 0; + *start = page + (off-begin); + return ((count < begin+len-off) ? count : begin+len-off); + +} /* end of mgsl_read_proc() */ + +/* mgsl_allocate_dma_buffers() + * + * Allocate and format DMA buffers (ISA adapter) + * or format shared memory buffers (PCI adapter). + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error + */ +static int mgsl_allocate_dma_buffers(struct mgsl_struct *info) +{ + unsigned short BuffersPerFrame; + + info->last_mem_alloc = 0; + + /* Calculate the number of DMA buffers necessary to hold the */ + /* largest allowable frame size. Note: If the max frame size is */ + /* not an even multiple of the DMA buffer size then we need to */ + /* round the buffer count per frame up one. */ + + BuffersPerFrame = (unsigned short)(info->max_frame_size/DMABUFFERSIZE); + if ( info->max_frame_size % DMABUFFERSIZE ) + BuffersPerFrame++; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* + * The PCI adapter has 256KBytes of shared memory to use. + * This is 64 PAGE_SIZE buffers. + * + * The first page is used for padding at this time so the + * buffer list does not begin at offset 0 of the PCI + * adapter's shared memory. + * + * The 2nd page is used for the buffer list. A 4K buffer + * list can hold 128 DMA_BUFFER structures at 32 bytes + * each. + * + * This leaves 62 4K pages. + * + * The next N pages are used for transmit frame(s). We + * reserve enough 4K page blocks to hold the required + * number of transmit dma buffers (num_tx_dma_buffers), + * each of MaxFrameSize size. + * + * Of the remaining pages (62-N), determine how many can + * be used to receive full MaxFrameSize inbound frames + */ + info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame; + info->rx_buffer_count = 62 - info->tx_buffer_count; + } else { + /* Calculate the number of PAGE_SIZE buffers needed for */ + /* receive and transmit DMA buffers. */ + + + /* Calculate the number of DMA buffers necessary to */ + /* hold 7 max size receive frames and one max size transmit frame. */ + /* The receive buffer count is bumped by one so we avoid an */ + /* End of List condition if all receive buffers are used when */ + /* using linked list DMA buffers. */ + + info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame; + info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6; + + /* + * limit total TxBuffers & RxBuffers to 62 4K total + * (ala PCI Allocation) + */ + + if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 ) + info->rx_buffer_count = 62 - info->tx_buffer_count; + + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n", + __FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count); + + if ( mgsl_alloc_buffer_list_memory( info ) < 0 || + mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 || + mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 || + mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 || + mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) { + printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__); + return -ENOMEM; + } + + mgsl_reset_rx_dma_buffers( info ); + mgsl_reset_tx_dma_buffers( info ); + + return 0; + +} /* end of mgsl_allocate_dma_buffers() */ + +/* + * mgsl_alloc_buffer_list_memory() + * + * Allocate a common DMA buffer for use as the + * receive and transmit buffer lists. + * + * A buffer list is a set of buffer entries where each entry contains + * a pointer to an actual buffer and a pointer to the next buffer entry + * (plus some other info about the buffer). + * + * The buffer entries for a list are built to form a circular list so + * that when the entire list has been traversed you start back at the + * beginning. + * + * This function allocates memory for just the buffer entries. + * The links (pointer to next entry) are filled in with the physical + * address of the next entry so the adapter can navigate the list + * using bus master DMA. The pointers to the actual buffers are filled + * out later when the actual buffers are allocated. + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise error + */ +static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info ) +{ + unsigned int i; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* PCI adapter uses shared memory. */ + info->buffer_list = info->memory_base + info->last_mem_alloc; + info->buffer_list_phys = info->last_mem_alloc; + info->last_mem_alloc += BUFFERLISTSIZE; + } else { + /* ISA adapter uses system memory. */ + /* The buffer lists are allocated as a common buffer that both */ + /* the processor and adapter can access. This allows the driver to */ + /* inspect portions of the buffer while other portions are being */ + /* updated by the adapter using Bus Master DMA. */ + + info->buffer_list = kmalloc(BUFFERLISTSIZE, GFP_KERNEL | GFP_DMA); + if ( info->buffer_list == NULL ) + return -ENOMEM; + + info->buffer_list_phys = isa_virt_to_bus(info->buffer_list); + } + + /* We got the memory for the buffer entry lists. */ + /* Initialize the memory block to all zeros. */ + memset( info->buffer_list, 0, BUFFERLISTSIZE ); + + /* Save virtual address pointers to the receive and */ + /* transmit buffer lists. (Receive 1st). These pointers will */ + /* be used by the processor to access the lists. */ + info->rx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; + info->tx_buffer_list = (DMABUFFERENTRY *)info->buffer_list; + info->tx_buffer_list += info->rx_buffer_count; + + /* + * Build the links for the buffer entry lists such that + * two circular lists are built. (Transmit and Receive). + * + * Note: the links are physical addresses + * which are read by the adapter to determine the next + * buffer entry to use. + */ + + for ( i = 0; i < info->rx_buffer_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->rx_buffer_list[i].phys_entry = + info->buffer_list_phys + (i * sizeof(DMABUFFERENTRY)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + + info->rx_buffer_list[i].link = info->buffer_list_phys; + + if ( i < info->rx_buffer_count - 1 ) + info->rx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); + } + + for ( i = 0; i < info->tx_buffer_count; i++ ) { + /* calculate and store physical address of this buffer entry */ + info->tx_buffer_list[i].phys_entry = info->buffer_list_phys + + ((info->rx_buffer_count + i) * sizeof(DMABUFFERENTRY)); + + /* calculate and store physical address of */ + /* next entry in cirular list of entries */ + + info->tx_buffer_list[i].link = info->buffer_list_phys + + info->rx_buffer_count * sizeof(DMABUFFERENTRY); + + if ( i < info->tx_buffer_count - 1 ) + info->tx_buffer_list[i].link += (i + 1) * sizeof(DMABUFFERENTRY); + } + + return 0; + +} /* end of mgsl_alloc_buffer_list_memory() */ + +/* Free DMA buffers allocated for use as the + * receive and transmit buffer lists. + * Warning: + * + * The data transfer buffers associated with the buffer list + * MUST be freed before freeing the buffer list itself because + * the buffer list contains the information necessary to free + * the individual buffers! + */ +static void mgsl_free_buffer_list_memory( struct mgsl_struct *info ) +{ + if ( info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI ) + kfree(info->buffer_list); + + info->buffer_list = NULL; + info->rx_buffer_list = NULL; + info->tx_buffer_list = NULL; + +} /* end of mgsl_free_buffer_list_memory() */ + +/* + * mgsl_alloc_frame_memory() + * + * Allocate the frame DMA buffers used by the specified buffer list. + * Each DMA buffer will be one memory page in size. This is necessary + * because memory can fragment enough that it may be impossible + * contiguous pages. + * + * Arguments: + * + * info pointer to device instance data + * BufferList pointer to list of buffer entries + * Buffercount count of buffer entries in buffer list + * + * Return Value: 0 if success, otherwise -ENOMEM + */ +static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount) +{ + int i; + unsigned long phys_addr; + + /* Allocate page sized buffers for the receive buffer list */ + + for ( i = 0; i < Buffercount; i++ ) { + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* PCI adapter uses shared memory buffers. */ + BufferList[i].virt_addr = info->memory_base + info->last_mem_alloc; + phys_addr = info->last_mem_alloc; + info->last_mem_alloc += DMABUFFERSIZE; + } else { + /* ISA adapter uses system memory. */ + BufferList[i].virt_addr = + kmalloc(DMABUFFERSIZE, GFP_KERNEL | GFP_DMA); + if ( BufferList[i].virt_addr == NULL ) + return -ENOMEM; + phys_addr = isa_virt_to_bus(BufferList[i].virt_addr); + } + BufferList[i].phys_addr = phys_addr; + } + + return 0; + +} /* end of mgsl_alloc_frame_memory() */ + +/* + * mgsl_free_frame_memory() + * + * Free the buffers associated with + * each buffer entry of a buffer list. + * + * Arguments: + * + * info pointer to device instance data + * BufferList pointer to list of buffer entries + * Buffercount count of buffer entries in buffer list + * + * Return Value: None + */ +static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount) +{ + int i; + + if ( BufferList ) { + for ( i = 0 ; i < Buffercount ; i++ ) { + if ( BufferList[i].virt_addr ) { + if ( info->bus_type != MGSL_BUS_TYPE_PCI ) + kfree(BufferList[i].virt_addr); + BufferList[i].virt_addr = NULL; + } + } + } + +} /* end of mgsl_free_frame_memory() */ + +/* mgsl_free_dma_buffers() + * + * Free DMA buffers + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_free_dma_buffers( struct mgsl_struct *info ) +{ + mgsl_free_frame_memory( info, info->rx_buffer_list, info->rx_buffer_count ); + mgsl_free_frame_memory( info, info->tx_buffer_list, info->tx_buffer_count ); + mgsl_free_buffer_list_memory( info ); + +} /* end of mgsl_free_dma_buffers() */ + + +/* + * mgsl_alloc_intermediate_rxbuffer_memory() + * + * Allocate a buffer large enough to hold max_frame_size. This buffer + * is used to pass an assembled frame to the line discipline. + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: 0 if success, otherwise -ENOMEM + */ +static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info) +{ + info->intermediate_rxbuffer = kmalloc(info->max_frame_size, GFP_KERNEL | GFP_DMA); + if ( info->intermediate_rxbuffer == NULL ) + return -ENOMEM; + + return 0; + +} /* end of mgsl_alloc_intermediate_rxbuffer_memory() */ + +/* + * mgsl_free_intermediate_rxbuffer_memory() + * + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: None + */ +static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info) +{ + if ( info->intermediate_rxbuffer ) + kfree(info->intermediate_rxbuffer); + + info->intermediate_rxbuffer = NULL; + +} /* end of mgsl_free_intermediate_rxbuffer_memory() */ + +/* + * mgsl_alloc_intermediate_txbuffer_memory() + * + * Allocate intermdiate transmit buffer(s) large enough to hold max_frame_size. + * This buffer is used to load transmit frames into the adapter's dma transfer + * buffers when there is sufficient space. + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: 0 if success, otherwise -ENOMEM + */ +static int mgsl_alloc_intermediate_txbuffer_memory(struct mgsl_struct *info) +{ + int i; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("%s %s(%d) allocating %d tx holding buffers\n", + info->device_name, __FILE__,__LINE__,info->num_tx_holding_buffers); + + memset(info->tx_holding_buffers,0,sizeof(info->tx_holding_buffers)); + + for ( i=0; i<info->num_tx_holding_buffers; ++i) { + info->tx_holding_buffers[i].buffer = + kmalloc(info->max_frame_size, GFP_KERNEL); + if ( info->tx_holding_buffers[i].buffer == NULL ) + return -ENOMEM; + } + + return 0; + +} /* end of mgsl_alloc_intermediate_txbuffer_memory() */ + +/* + * mgsl_free_intermediate_txbuffer_memory() + * + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: None + */ +static void mgsl_free_intermediate_txbuffer_memory(struct mgsl_struct *info) +{ + int i; + + for ( i=0; i<info->num_tx_holding_buffers; ++i ) { + if ( info->tx_holding_buffers[i].buffer ) { + kfree(info->tx_holding_buffers[i].buffer); + info->tx_holding_buffers[i].buffer=NULL; + } + } + + info->get_tx_holding_index = 0; + info->put_tx_holding_index = 0; + info->tx_holding_count = 0; + +} /* end of mgsl_free_intermediate_txbuffer_memory() */ + + +/* + * load_next_tx_holding_buffer() + * + * attempts to load the next buffered tx request into the + * tx dma buffers + * + * Arguments: + * + * info pointer to device instance data + * + * Return Value: 1 if next buffered tx request loaded + * into adapter's tx dma buffer, + * 0 otherwise + */ +static int load_next_tx_holding_buffer(struct mgsl_struct *info) +{ + int ret = 0; + + if ( info->tx_holding_count ) { + /* determine if we have enough tx dma buffers + * to accommodate the next tx frame + */ + struct tx_holding_buffer *ptx = + &info->tx_holding_buffers[info->get_tx_holding_index]; + int num_free = num_free_tx_dma_buffers(info); + int num_needed = ptx->buffer_size / DMABUFFERSIZE; + if ( ptx->buffer_size % DMABUFFERSIZE ) + ++num_needed; + + if (num_needed <= num_free) { + info->xmit_cnt = ptx->buffer_size; + mgsl_load_tx_dma_buffer(info,ptx->buffer,ptx->buffer_size); + + --info->tx_holding_count; + if ( ++info->get_tx_holding_index >= info->num_tx_holding_buffers) + info->get_tx_holding_index=0; + + /* restart transmit timer */ + mod_timer(&info->tx_timer, jiffies + msecs_to_jiffies(5000)); + + ret = 1; + } + } + + return ret; +} + +/* + * save_tx_buffer_request() + * + * attempt to store transmit frame request for later transmission + * + * Arguments: + * + * info pointer to device instance data + * Buffer pointer to buffer containing frame to load + * BufferSize size in bytes of frame in Buffer + * + * Return Value: 1 if able to store, 0 otherwise + */ +static int save_tx_buffer_request(struct mgsl_struct *info,const char *Buffer, unsigned int BufferSize) +{ + struct tx_holding_buffer *ptx; + + if ( info->tx_holding_count >= info->num_tx_holding_buffers ) { + return 0; /* all buffers in use */ + } + + ptx = &info->tx_holding_buffers[info->put_tx_holding_index]; + ptx->buffer_size = BufferSize; + memcpy( ptx->buffer, Buffer, BufferSize); + + ++info->tx_holding_count; + if ( ++info->put_tx_holding_index >= info->num_tx_holding_buffers) + info->put_tx_holding_index=0; + + return 1; +} + +static int mgsl_claim_resources(struct mgsl_struct *info) +{ + if (request_region(info->io_base,info->io_addr_size,"synclink") == NULL) { + printk( "%s(%d):I/O address conflict on device %s Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->io_base); + return -ENODEV; + } + info->io_addr_requested = 1; + + if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags, + info->device_name, info ) < 0 ) { + printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n", + __FILE__,__LINE__,info->device_name, info->irq_level ); + goto errout; + } + info->irq_requested = 1; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) { + printk( "%s(%d):mem addr conflict device %s Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base); + goto errout; + } + info->shared_mem_requested = 1; + if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclink") == NULL) { + printk( "%s(%d):lcr mem addr conflict device %s Addr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base + info->lcr_offset); + goto errout; + } + info->lcr_mem_requested = 1; + + info->memory_base = ioremap(info->phys_memory_base,0x40000); + if (!info->memory_base) { + printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + goto errout; + } + + if ( !mgsl_memory_test(info) ) { + printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_memory_base ); + goto errout; + } + + info->lcr_base = ioremap(info->phys_lcr_base,PAGE_SIZE) + info->lcr_offset; + if (!info->lcr_base) { + printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n", + __FILE__,__LINE__,info->device_name, info->phys_lcr_base ); + goto errout; + } + + } else { + /* claim DMA channel */ + + if (request_dma(info->dma_level,info->device_name) < 0){ + printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n", + __FILE__,__LINE__,info->device_name, info->dma_level ); + mgsl_release_resources( info ); + return -ENODEV; + } + info->dma_requested = 1; + + /* ISA adapter uses bus master DMA */ + set_dma_mode(info->dma_level,DMA_MODE_CASCADE); + enable_dma(info->dma_level); + } + + if ( mgsl_allocate_dma_buffers(info) < 0 ) { + printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n", + __FILE__,__LINE__,info->device_name, info->dma_level ); + goto errout; + } + + return 0; +errout: + mgsl_release_resources(info); + return -ENODEV; + +} /* end of mgsl_claim_resources() */ + +static void mgsl_release_resources(struct mgsl_struct *info) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_release_resources(%s) entry\n", + __FILE__,__LINE__,info->device_name ); + + if ( info->irq_requested ) { + free_irq(info->irq_level, info); + info->irq_requested = 0; + } + if ( info->dma_requested ) { + disable_dma(info->dma_level); + free_dma(info->dma_level); + info->dma_requested = 0; + } + mgsl_free_dma_buffers(info); + mgsl_free_intermediate_rxbuffer_memory(info); + mgsl_free_intermediate_txbuffer_memory(info); + + if ( info->io_addr_requested ) { + release_region(info->io_base,info->io_addr_size); + info->io_addr_requested = 0; + } + if ( info->shared_mem_requested ) { + release_mem_region(info->phys_memory_base,0x40000); + info->shared_mem_requested = 0; + } + if ( info->lcr_mem_requested ) { + release_mem_region(info->phys_lcr_base + info->lcr_offset,128); + info->lcr_mem_requested = 0; + } + if (info->memory_base){ + iounmap(info->memory_base); + info->memory_base = NULL; + } + if (info->lcr_base){ + iounmap(info->lcr_base - info->lcr_offset); + info->lcr_base = NULL; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_release_resources(%s) exit\n", + __FILE__,__LINE__,info->device_name ); + +} /* end of mgsl_release_resources() */ + +/* mgsl_add_device() + * + * Add the specified device instance data structure to the + * global linked list of devices and increment the device count. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_add_device( struct mgsl_struct *info ) +{ + info->next_device = NULL; + info->line = mgsl_device_count; + sprintf(info->device_name,"ttySL%d",info->line); + + if (info->line < MAX_TOTAL_DEVICES) { + if (maxframe[info->line]) + info->max_frame_size = maxframe[info->line]; + info->dosyncppp = dosyncppp[info->line]; + + if (txdmabufs[info->line]) { + info->num_tx_dma_buffers = txdmabufs[info->line]; + if (info->num_tx_dma_buffers < 1) + info->num_tx_dma_buffers = 1; + } + + if (txholdbufs[info->line]) { + info->num_tx_holding_buffers = txholdbufs[info->line]; + if (info->num_tx_holding_buffers < 1) + info->num_tx_holding_buffers = 1; + else if (info->num_tx_holding_buffers > MAX_TX_HOLDING_BUFFERS) + info->num_tx_holding_buffers = MAX_TX_HOLDING_BUFFERS; + } + } + + mgsl_device_count++; + + if ( !mgsl_device_list ) + mgsl_device_list = info; + else { + struct mgsl_struct *current_dev = mgsl_device_list; + while( current_dev->next_device ) + current_dev = current_dev->next_device; + current_dev->next_device = info; + } + + if ( info->max_frame_size < 4096 ) + info->max_frame_size = 4096; + else if ( info->max_frame_size > 65535 ) + info->max_frame_size = 65535; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n", + info->hw_version + 1, info->device_name, info->io_base, info->irq_level, + info->phys_memory_base, info->phys_lcr_base, + info->max_frame_size ); + } else { + printk( "SyncLink ISA %s: IO=%04X IRQ=%d DMA=%d MaxFrameSize=%u\n", + info->device_name, info->io_base, info->irq_level, info->dma_level, + info->max_frame_size ); + } + +#ifdef CONFIG_HDLC + hdlcdev_init(info); +#endif + +} /* end of mgsl_add_device() */ + +/* mgsl_allocate_device() + * + * Allocate and initialize a device instance structure + * + * Arguments: none + * Return Value: pointer to mgsl_struct if success, otherwise NULL + */ +static struct mgsl_struct* mgsl_allocate_device(void) +{ + struct mgsl_struct *info; + + info = (struct mgsl_struct *)kmalloc(sizeof(struct mgsl_struct), + GFP_KERNEL); + + if (!info) { + printk("Error can't allocate device instance data\n"); + } else { + memset(info, 0, sizeof(struct mgsl_struct)); + info->magic = MGSL_MAGIC; + INIT_WORK(&info->task, mgsl_bh_handler, info); + info->max_frame_size = 4096; + info->close_delay = 5*HZ/10; + info->closing_wait = 30*HZ; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->irq_spinlock); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->num_tx_dma_buffers = 1; + info->num_tx_holding_buffers = 0; + } + + return info; + +} /* end of mgsl_allocate_device()*/ + +static struct tty_operations mgsl_ops = { + .open = mgsl_open, + .close = mgsl_close, + .write = mgsl_write, + .put_char = mgsl_put_char, + .flush_chars = mgsl_flush_chars, + .write_room = mgsl_write_room, + .chars_in_buffer = mgsl_chars_in_buffer, + .flush_buffer = mgsl_flush_buffer, + .ioctl = mgsl_ioctl, + .throttle = mgsl_throttle, + .unthrottle = mgsl_unthrottle, + .send_xchar = mgsl_send_xchar, + .break_ctl = mgsl_break, + .wait_until_sent = mgsl_wait_until_sent, + .read_proc = mgsl_read_proc, + .set_termios = mgsl_set_termios, + .stop = mgsl_stop, + .start = mgsl_start, + .hangup = mgsl_hangup, + .tiocmget = tiocmget, + .tiocmset = tiocmset, +}; + +/* + * perform tty device initialization + */ +static int mgsl_init_tty(void) +{ + int rc; + + serial_driver = alloc_tty_driver(128); + if (!serial_driver) + return -ENOMEM; + + serial_driver->owner = THIS_MODULE; + serial_driver->driver_name = "synclink"; + serial_driver->name = "ttySL"; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &mgsl_ops); + if ((rc = tty_register_driver(serial_driver)) < 0) { + printk("%s(%d):Couldn't register serial driver\n", + __FILE__,__LINE__); + put_tty_driver(serial_driver); + serial_driver = NULL; + return rc; + } + + printk("%s %s, tty major#%d\n", + driver_name, driver_version, + serial_driver->major); + return 0; +} + +/* enumerate user specified ISA adapters + */ +static void mgsl_enum_isa_devices(void) +{ + struct mgsl_struct *info; + int i; + + /* Check for user specified ISA devices */ + + for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk("ISA device specified io=%04X,irq=%d,dma=%d\n", + io[i], irq[i], dma[i] ); + + info = mgsl_allocate_device(); + if ( !info ) { + /* error allocating device instance data */ + if ( debug_level >= DEBUG_LEVEL_ERROR ) + printk( "can't allocate device instance data.\n"); + continue; + } + + /* Copy user configuration info to device instance data */ + info->io_base = (unsigned int)io[i]; + info->irq_level = (unsigned int)irq[i]; + info->irq_level = irq_canonicalize(info->irq_level); + info->dma_level = (unsigned int)dma[i]; + info->bus_type = MGSL_BUS_TYPE_ISA; + info->io_addr_size = 16; + info->irq_flags = 0; + + mgsl_add_device( info ); + } +} + +static void synclink_cleanup(void) +{ + int rc; + struct mgsl_struct *info; + struct mgsl_struct *tmp; + + printk("Unloading %s: %s\n", driver_name, driver_version); + + if (serial_driver) { + if ((rc = tty_unregister_driver(serial_driver))) + printk("%s(%d) failed to unregister tty driver err=%d\n", + __FILE__,__LINE__,rc); + put_tty_driver(serial_driver); + } + + info = mgsl_device_list; + while(info) { +#ifdef CONFIG_HDLC + hdlcdev_exit(info); +#endif + mgsl_release_resources(info); + tmp = info; + info = info->next_device; + kfree(tmp); + } + + if (tmp_buf) { + free_page((unsigned long) tmp_buf); + tmp_buf = NULL; + } + + if (pci_registered) + pci_unregister_driver(&synclink_pci_driver); +} + +static int __init synclink_init(void) +{ + int rc; + + if (break_on_load) { + mgsl_get_text_ptr(); + BREAKPOINT(); + } + + printk("%s %s\n", driver_name, driver_version); + + mgsl_enum_isa_devices(); + if ((rc = pci_register_driver(&synclink_pci_driver)) < 0) + printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc); + else + pci_registered = 1; + + if ((rc = mgsl_init_tty()) < 0) + goto error; + + return 0; + +error: + synclink_cleanup(); + return rc; +} + +static void __exit synclink_exit(void) +{ + synclink_cleanup(); +} + +module_init(synclink_init); +module_exit(synclink_exit); + +/* + * usc_RTCmd() + * + * Issue a USC Receive/Transmit command to the + * Channel Command/Address Register (CCAR). + * + * Notes: + * + * The command is encoded in the most significant 5 bits <15..11> + * of the CCAR value. Bits <10..7> of the CCAR must be preserved + * and Bits <6..0> must be written as zeros. + * + * Arguments: + * + * info pointer to device information structure + * Cmd command mask (use symbolic macros) + * + * Return Value: + * + * None + */ +static void usc_RTCmd( struct mgsl_struct *info, u16 Cmd ) +{ + /* output command to CCAR in bits <15..11> */ + /* preserve bits <10..7>, bits <6..0> must be zero */ + + outw( Cmd + info->loopback_bits, info->io_base + CCAR ); + + /* Read to flush write to CCAR */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + inw( info->io_base + CCAR ); + +} /* end of usc_RTCmd() */ + +/* + * usc_DmaCmd() + * + * Issue a DMA command to the DMA Command/Address Register (DCAR). + * + * Arguments: + * + * info pointer to device information structure + * Cmd DMA command mask (usc_DmaCmd_XX Macros) + * + * Return Value: + * + * None + */ +static void usc_DmaCmd( struct mgsl_struct *info, u16 Cmd ) +{ + /* write command mask to DCAR */ + outw( Cmd + info->mbre_bit, info->io_base ); + + /* Read to flush write to DCAR */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + inw( info->io_base ); + +} /* end of usc_DmaCmd() */ + +/* + * usc_OutDmaReg() + * + * Write a 16-bit value to a USC DMA register + * + * Arguments: + * + * info pointer to device info structure + * RegAddr register address (number) for write + * RegValue 16-bit value to write to register + * + * Return Value: + * + * None + * + */ +static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) +{ + /* Note: The DCAR is located at the adapter base address */ + /* Note: must preserve state of BIT8 in DCAR */ + + outw( RegAddr + info->mbre_bit, info->io_base ); + outw( RegValue, info->io_base ); + + /* Read to flush write to DCAR */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + inw( info->io_base ); + +} /* end of usc_OutDmaReg() */ + +/* + * usc_InDmaReg() + * + * Read a 16-bit value from a DMA register + * + * Arguments: + * + * info pointer to device info structure + * RegAddr register address (number) to read from + * + * Return Value: + * + * The 16-bit value read from register + * + */ +static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr ) +{ + /* Note: The DCAR is located at the adapter base address */ + /* Note: must preserve state of BIT8 in DCAR */ + + outw( RegAddr + info->mbre_bit, info->io_base ); + return inw( info->io_base ); + +} /* end of usc_InDmaReg() */ + +/* + * + * usc_OutReg() + * + * Write a 16-bit value to a USC serial channel register + * + * Arguments: + * + * info pointer to device info structure + * RegAddr register address (number) to write to + * RegValue 16-bit value to write to register + * + * Return Value: + * + * None + * + */ +static void usc_OutReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue ) +{ + outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); + outw( RegValue, info->io_base + CCAR ); + + /* Read to flush write to CCAR */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + inw( info->io_base + CCAR ); + +} /* end of usc_OutReg() */ + +/* + * usc_InReg() + * + * Reads a 16-bit value from a USC serial channel register + * + * Arguments: + * + * info pointer to device extension + * RegAddr register address (number) to read from + * + * Return Value: + * + * 16-bit value read from register + */ +static u16 usc_InReg( struct mgsl_struct *info, u16 RegAddr ) +{ + outw( RegAddr + info->loopback_bits, info->io_base + CCAR ); + return inw( info->io_base + CCAR ); + +} /* end of usc_InReg() */ + +/* usc_set_sdlc_mode() + * + * Set up the adapter for SDLC DMA communications. + * + * Arguments: info pointer to device instance data + * Return Value: NONE + */ +static void usc_set_sdlc_mode( struct mgsl_struct *info ) +{ + u16 RegValue; + int PreSL1660; + + /* + * determine if the IUSC on the adapter is pre-SL1660. If + * not, take advantage of the UnderWait feature of more + * modern chips. If an underrun occurs and this bit is set, + * the transmitter will idle the programmed idle pattern + * until the driver has time to service the underrun. Otherwise, + * the dma controller may get the cycles previously requested + * and begin transmitting queued tx data. + */ + usc_OutReg(info,TMCR,0x1f); + RegValue=usc_InReg(info,TMDR); + if ( RegValue == IUSC_PRE_SL1660 ) + PreSL1660 = 1; + else + PreSL1660 = 0; + + + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + { + /* + ** Channel Mode Register (CMR) + ** + ** <15..14> 10 Tx Sub Modes, Send Flag on Underrun + ** <13> 0 0 = Transmit Disabled (initially) + ** <12> 0 1 = Consecutive Idles share common 0 + ** <11..8> 1110 Transmitter Mode = HDLC/SDLC Loop + ** <7..4> 0000 Rx Sub Modes, addr/ctrl field handling + ** <3..0> 0110 Receiver Mode = HDLC/SDLC + ** + ** 1000 1110 0000 0110 = 0x8e06 + */ + RegValue = 0x8e06; + + /*-------------------------------------------------- + * ignore user options for UnderRun Actions and + * preambles + *--------------------------------------------------*/ + } + else + { + /* Channel mode Register (CMR) + * + * <15..14> 00 Tx Sub modes, Underrun Action + * <13> 0 1 = Send Preamble before opening flag + * <12> 0 1 = Consecutive Idles share common 0 + * <11..8> 0110 Transmitter mode = HDLC/SDLC + * <7..4> 0000 Rx Sub modes, addr/ctrl field handling + * <3..0> 0110 Receiver mode = HDLC/SDLC + * + * 0000 0110 0000 0110 = 0x0606 + */ + if (info->params.mode == MGSL_MODE_RAW) { + RegValue = 0x0001; /* Set Receive mode = external sync */ + + usc_OutReg( info, IOCR, /* Set IOCR DCD is RxSync Detect Input */ + (unsigned short)((usc_InReg(info, IOCR) & ~(BIT13|BIT12)) | BIT12)); + + /* + * TxSubMode: + * CMR <15> 0 Don't send CRC on Tx Underrun + * CMR <14> x undefined + * CMR <13> 0 Send preamble before openning sync + * CMR <12> 0 Send 8-bit syncs, 1=send Syncs per TxLength + * + * TxMode: + * CMR <11-8) 0100 MonoSync + * + * 0x00 0100 xxxx xxxx 04xx + */ + RegValue |= 0x0400; + } + else { + + RegValue = 0x0606; + + if ( info->params.flags & HDLC_FLAG_UNDERRUN_ABORT15 ) + RegValue |= BIT14; + else if ( info->params.flags & HDLC_FLAG_UNDERRUN_FLAG ) + RegValue |= BIT15; + else if ( info->params.flags & HDLC_FLAG_UNDERRUN_CRC ) + RegValue |= BIT15 + BIT14; + } + + if ( info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE ) + RegValue |= BIT13; + } + + if ( info->params.mode == MGSL_MODE_HDLC && + (info->params.flags & HDLC_FLAG_SHARE_ZERO) ) + RegValue |= BIT12; + + if ( info->params.addr_filter != 0xff ) + { + /* set up receive address filtering */ + usc_OutReg( info, RSR, info->params.addr_filter ); + RegValue |= BIT4; + } + + usc_OutReg( info, CMR, RegValue ); + info->cmr_value = RegValue; + + /* Receiver mode Register (RMR) + * + * <15..13> 000 encoding + * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) + * <10> 1 1 = Set CRC to all 1s (use for SDLC/HDLC) + * <9> 0 1 = Include Receive chars in CRC + * <8> 1 1 = Use Abort/PE bit as abort indicator + * <7..6> 00 Even parity + * <5> 0 parity disabled + * <4..2> 000 Receive Char Length = 8 bits + * <1..0> 00 Disable Receiver + * + * 0000 0101 0000 0000 = 0x0500 + */ + + RegValue = 0x0500; + + switch ( info->params.encoding ) { + case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; + case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break; + case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break; + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break; + } + + if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) + RegValue |= BIT9; + else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) + RegValue |= ( BIT12 | BIT10 | BIT9 ); + + usc_OutReg( info, RMR, RegValue ); + + /* Set the Receive count Limit Register (RCLR) to 0xffff. */ + /* When an opening flag of an SDLC frame is recognized the */ + /* Receive Character count (RCC) is loaded with the value in */ + /* RCLR. The RCC is decremented for each received byte. The */ + /* value of RCC is stored after the closing flag of the frame */ + /* allowing the frame size to be computed. */ + + usc_OutReg( info, RCLR, RCLRVALUE ); + + usc_RCmd( info, RCmd_SelectRicrdma_level ); + + /* Receive Interrupt Control Register (RICR) + * + * <15..8> ? RxFIFO DMA Request Level + * <7> 0 Exited Hunt IA (Interrupt Arm) + * <6> 0 Idle Received IA + * <5> 0 Break/Abort IA + * <4> 0 Rx Bound IA + * <3> 1 Queued status reflects oldest 2 bytes in FIFO + * <2> 0 Abort/PE IA + * <1> 1 Rx Overrun IA + * <0> 0 Select TC0 value for readback + * + * 0000 0000 0000 1000 = 0x000a + */ + + /* Carry over the Exit Hunt and Idle Received bits */ + /* in case they have been armed by usc_ArmEvents. */ + + RegValue = usc_InReg( info, RICR ) & 0xc0; + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + usc_OutReg( info, RICR, (u16)(0x030a | RegValue) ); + else + usc_OutReg( info, RICR, (u16)(0x140a | RegValue) ); + + /* Unlatch all Rx status bits and clear Rx status IRQ Pending */ + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); + + /* Transmit mode Register (TMR) + * + * <15..13> 000 encoding + * <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1) + * <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC) + * <9> 0 1 = Tx CRC Enabled + * <8> 0 1 = Append CRC to end of transmit frame + * <7..6> 00 Transmit parity Even + * <5> 0 Transmit parity Disabled + * <4..2> 000 Tx Char Length = 8 bits + * <1..0> 00 Disable Transmitter + * + * 0000 0100 0000 0000 = 0x0400 + */ + + RegValue = 0x0400; + + switch ( info->params.encoding ) { + case HDLC_ENCODING_NRZB: RegValue |= BIT13; break; + case HDLC_ENCODING_NRZI_MARK: RegValue |= BIT14; break; + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT14 + BIT13; break; + case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT15; break; + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT15 + BIT13; break; + case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT15 + BIT14 + BIT13; break; + } + + if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_16_CCITT ) + RegValue |= BIT9 + BIT8; + else if ( (info->params.crc_type & HDLC_CRC_MASK) == HDLC_CRC_32_CCITT ) + RegValue |= ( BIT12 | BIT10 | BIT9 | BIT8); + + usc_OutReg( info, TMR, RegValue ); + + usc_set_txidle( info ); + + + usc_TCmd( info, TCmd_SelectTicrdma_level ); + + /* Transmit Interrupt Control Register (TICR) + * + * <15..8> ? Transmit FIFO DMA Level + * <7> 0 Present IA (Interrupt Arm) + * <6> 0 Idle Sent IA + * <5> 1 Abort Sent IA + * <4> 1 EOF/EOM Sent IA + * <3> 0 CRC Sent IA + * <2> 1 1 = Wait for SW Trigger to Start Frame + * <1> 1 Tx Underrun IA + * <0> 0 TC0 constant on read back + * + * 0000 0000 0011 0110 = 0x0036 + */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + usc_OutReg( info, TICR, 0x0736 ); + else + usc_OutReg( info, TICR, 0x1436 ); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + + /* + ** Transmit Command/Status Register (TCSR) + ** + ** <15..12> 0000 TCmd + ** <11> 0/1 UnderWait + ** <10..08> 000 TxIdle + ** <7> x PreSent + ** <6> x IdleSent + ** <5> x AbortSent + ** <4> x EOF/EOM Sent + ** <3> x CRC Sent + ** <2> x All Sent + ** <1> x TxUnder + ** <0> x TxEmpty + ** + ** 0000 0000 0000 0000 = 0x0000 + */ + info->tcsr_value = 0; + + if ( !PreSL1660 ) + info->tcsr_value |= TCSR_UNDERWAIT; + + usc_OutReg( info, TCSR, info->tcsr_value ); + + /* Clock mode Control Register (CMCR) + * + * <15..14> 00 counter 1 Source = Disabled + * <13..12> 00 counter 0 Source = Disabled + * <11..10> 11 BRG1 Input is TxC Pin + * <9..8> 11 BRG0 Input is TxC Pin + * <7..6> 01 DPLL Input is BRG1 Output + * <5..3> XXX TxCLK comes from Port 0 + * <2..0> XXX RxCLK comes from Port 1 + * + * 0000 1111 0111 0111 = 0x0f77 + */ + + RegValue = 0x0f40; + + if ( info->params.flags & HDLC_FLAG_RXC_DPLL ) + RegValue |= 0x0003; /* RxCLK from DPLL */ + else if ( info->params.flags & HDLC_FLAG_RXC_BRG ) + RegValue |= 0x0004; /* RxCLK from BRG0 */ + else if ( info->params.flags & HDLC_FLAG_RXC_TXCPIN) + RegValue |= 0x0006; /* RxCLK from TXC Input */ + else + RegValue |= 0x0007; /* RxCLK from Port1 */ + + if ( info->params.flags & HDLC_FLAG_TXC_DPLL ) + RegValue |= 0x0018; /* TxCLK from DPLL */ + else if ( info->params.flags & HDLC_FLAG_TXC_BRG ) + RegValue |= 0x0020; /* TxCLK from BRG0 */ + else if ( info->params.flags & HDLC_FLAG_TXC_RXCPIN) + RegValue |= 0x0038; /* RxCLK from TXC Input */ + else + RegValue |= 0x0030; /* TxCLK from Port0 */ + + usc_OutReg( info, CMCR, RegValue ); + + + /* Hardware Configuration Register (HCR) + * + * <15..14> 00 CTR0 Divisor:00=32,01=16,10=8,11=4 + * <13> 0 CTR1DSel:0=CTR0Div determines CTR0Div + * <12> 0 CVOK:0=report code violation in biphase + * <11..10> 00 DPLL Divisor:00=32,01=16,10=8,11=4 + * <9..8> XX DPLL mode:00=disable,01=NRZ,10=Biphase,11=Biphase Level + * <7..6> 00 reserved + * <5> 0 BRG1 mode:0=continuous,1=single cycle + * <4> X BRG1 Enable + * <3..2> 00 reserved + * <1> 0 BRG0 mode:0=continuous,1=single cycle + * <0> 0 BRG0 Enable + */ + + RegValue = 0x0000; + + if ( info->params.flags & (HDLC_FLAG_RXC_DPLL + HDLC_FLAG_TXC_DPLL) ) { + u32 XtalSpeed; + u32 DpllDivisor; + u16 Tc; + + /* DPLL is enabled. Use BRG1 to provide continuous reference clock */ + /* for DPLL. DPLL mode in HCR is dependent on the encoding used. */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + XtalSpeed = 11059200; + else + XtalSpeed = 14745600; + + if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) { + DpllDivisor = 16; + RegValue |= BIT10; + } + else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) { + DpllDivisor = 8; + RegValue |= BIT11; + } + else + DpllDivisor = 32; + + /* Tc = (Xtal/Speed) - 1 */ + /* If twice the remainder of (Xtal/Speed) is greater than Speed */ + /* then rounding up gives a more precise time constant. Instead */ + /* of rounding up and then subtracting 1 we just don't subtract */ + /* the one in this case. */ + + /*-------------------------------------------------- + * ejz: for DPLL mode, application should use the + * same clock speed as the partner system, even + * though clocking is derived from the input RxData. + * In case the user uses a 0 for the clock speed, + * default to 0xffffffff and don't try to divide by + * zero + *--------------------------------------------------*/ + if ( info->params.clock_speed ) + { + Tc = (u16)((XtalSpeed/DpllDivisor)/info->params.clock_speed); + if ( !((((XtalSpeed/DpllDivisor) % info->params.clock_speed) * 2) + / info->params.clock_speed) ) + Tc--; + } + else + Tc = -1; + + + /* Write 16-bit Time Constant for BRG1 */ + usc_OutReg( info, TC1R, Tc ); + + RegValue |= BIT4; /* enable BRG1 */ + + switch ( info->params.encoding ) { + case HDLC_ENCODING_NRZ: + case HDLC_ENCODING_NRZB: + case HDLC_ENCODING_NRZI_MARK: + case HDLC_ENCODING_NRZI_SPACE: RegValue |= BIT8; break; + case HDLC_ENCODING_BIPHASE_MARK: + case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT9; break; + case HDLC_ENCODING_BIPHASE_LEVEL: + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: RegValue |= BIT9 + BIT8; break; + } + } + + usc_OutReg( info, HCR, RegValue ); + + + /* Channel Control/status Register (CCSR) + * + * <15> X RCC FIFO Overflow status (RO) + * <14> X RCC FIFO Not Empty status (RO) + * <13> 0 1 = Clear RCC FIFO (WO) + * <12> X DPLL Sync (RW) + * <11> X DPLL 2 Missed Clocks status (RO) + * <10> X DPLL 1 Missed Clock status (RO) + * <9..8> 00 DPLL Resync on rising and falling edges (RW) + * <7> X SDLC Loop On status (RO) + * <6> X SDLC Loop Send status (RO) + * <5> 1 Bypass counters for TxClk and RxClk (RW) + * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) + * <1..0> 00 reserved + * + * 0000 0000 0010 0000 = 0x0020 + */ + + usc_OutReg( info, CCSR, 0x1020 ); + + + if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) { + usc_OutReg( info, SICR, + (u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) ); + } + + + /* enable Master Interrupt Enable bit (MIE) */ + usc_EnableMasterIrqBit( info ); + + usc_ClearIrqPendingBits( info, RECEIVE_STATUS + RECEIVE_DATA + + TRANSMIT_STATUS + TRANSMIT_DATA + MISC); + + /* arm RCC underflow interrupt */ + usc_OutReg(info, SICR, (u16)(usc_InReg(info,SICR) | BIT3)); + usc_EnableInterrupts(info, MISC); + + info->mbre_bit = 0; + outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ + usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ + info->mbre_bit = BIT8; + outw( BIT8, info->io_base ); /* set Master Bus Enable (DCAR) */ + + if (info->bus_type == MGSL_BUS_TYPE_ISA) { + /* Enable DMAEN (Port 7, Bit 14) */ + /* This connects the DMA request signal to the ISA bus */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT15) & ~BIT14)); + } + + /* DMA Control Register (DCR) + * + * <15..14> 10 Priority mode = Alternating Tx/Rx + * 01 Rx has priority + * 00 Tx has priority + * + * <13> 1 Enable Priority Preempt per DCR<15..14> + * (WARNING DCR<11..10> must be 00 when this is 1) + * 0 Choose activate channel per DCR<11..10> + * + * <12> 0 Little Endian for Array/List + * <11..10> 00 Both Channels can use each bus grant + * <9..6> 0000 reserved + * <5> 0 7 CLK - Minimum Bus Re-request Interval + * <4> 0 1 = drive D/C and S/D pins + * <3> 1 1 = Add one wait state to all DMA cycles. + * <2> 0 1 = Strobe /UAS on every transfer. + * <1..0> 11 Addr incrementing only affects LS24 bits + * + * 0110 0000 0000 1011 = 0x600b + */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* PCI adapter does not need DMA wait state */ + usc_OutDmaReg( info, DCR, 0xa00b ); + } + else + usc_OutDmaReg( info, DCR, 0x800b ); + + + /* Receive DMA mode Register (RDMR) + * + * <15..14> 11 DMA mode = Linked List Buffer mode + * <13> 1 RSBinA/L = store Rx status Block in Arrary/List entry + * <12> 1 Clear count of List Entry after fetching + * <11..10> 00 Address mode = Increment + * <9> 1 Terminate Buffer on RxBound + * <8> 0 Bus Width = 16bits + * <7..0> ? status Bits (write as 0s) + * + * 1111 0010 0000 0000 = 0xf200 + */ + + usc_OutDmaReg( info, RDMR, 0xf200 ); + + + /* Transmit DMA mode Register (TDMR) + * + * <15..14> 11 DMA mode = Linked List Buffer mode + * <13> 1 TCBinA/L = fetch Tx Control Block from List entry + * <12> 1 Clear count of List Entry after fetching + * <11..10> 00 Address mode = Increment + * <9> 1 Terminate Buffer on end of frame + * <8> 0 Bus Width = 16bits + * <7..0> ? status Bits (Read Only so write as 0) + * + * 1111 0010 0000 0000 = 0xf200 + */ + + usc_OutDmaReg( info, TDMR, 0xf200 ); + + + /* DMA Interrupt Control Register (DICR) + * + * <15> 1 DMA Interrupt Enable + * <14> 0 1 = Disable IEO from USC + * <13> 0 1 = Don't provide vector during IntAck + * <12> 1 1 = Include status in Vector + * <10..2> 0 reserved, Must be 0s + * <1> 0 1 = Rx DMA Interrupt Enabled + * <0> 0 1 = Tx DMA Interrupt Enabled + * + * 1001 0000 0000 0000 = 0x9000 + */ + + usc_OutDmaReg( info, DICR, 0x9000 ); + + usc_InDmaReg( info, RDMR ); /* clear pending receive DMA IRQ bits */ + usc_InDmaReg( info, TDMR ); /* clear pending transmit DMA IRQ bits */ + usc_OutDmaReg( info, CDIR, 0x0303 ); /* clear IUS and Pending for Tx and Rx */ + + /* Channel Control Register (CCR) + * + * <15..14> 10 Use 32-bit Tx Control Blocks (TCBs) + * <13> 0 Trigger Tx on SW Command Disabled + * <12> 0 Flag Preamble Disabled + * <11..10> 00 Preamble Length + * <9..8> 00 Preamble Pattern + * <7..6> 10 Use 32-bit Rx status Blocks (RSBs) + * <5> 0 Trigger Rx on SW Command Disabled + * <4..0> 0 reserved + * + * 1000 0000 1000 0000 = 0x8080 + */ + + RegValue = 0x8080; + + switch ( info->params.preamble_length ) { + case HDLC_PREAMBLE_LENGTH_16BITS: RegValue |= BIT10; break; + case HDLC_PREAMBLE_LENGTH_32BITS: RegValue |= BIT11; break; + case HDLC_PREAMBLE_LENGTH_64BITS: RegValue |= BIT11 + BIT10; break; + } + + switch ( info->params.preamble ) { + case HDLC_PREAMBLE_PATTERN_FLAGS: RegValue |= BIT8 + BIT12; break; + case HDLC_PREAMBLE_PATTERN_ONES: RegValue |= BIT8; break; + case HDLC_PREAMBLE_PATTERN_10: RegValue |= BIT9; break; + case HDLC_PREAMBLE_PATTERN_01: RegValue |= BIT9 + BIT8; break; + } + + usc_OutReg( info, CCR, RegValue ); + + + /* + * Burst/Dwell Control Register + * + * <15..8> 0x20 Maximum number of transfers per bus grant + * <7..0> 0x00 Maximum number of clock cycles per bus grant + */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + /* don't limit bus occupancy on PCI adapter */ + usc_OutDmaReg( info, BDCR, 0x0000 ); + } + else + usc_OutDmaReg( info, BDCR, 0x2000 ); + + usc_stop_transmitter(info); + usc_stop_receiver(info); + +} /* end of usc_set_sdlc_mode() */ + +/* usc_enable_loopback() + * + * Set the 16C32 for internal loopback mode. + * The TxCLK and RxCLK signals are generated from the BRG0 and + * the TxD is looped back to the RxD internally. + * + * Arguments: info pointer to device instance data + * enable 1 = enable loopback, 0 = disable + * Return Value: None + */ +static void usc_enable_loopback(struct mgsl_struct *info, int enable) +{ + if (enable) { + /* blank external TXD output */ + usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7+BIT6)); + + /* Clock mode Control Register (CMCR) + * + * <15..14> 00 counter 1 Disabled + * <13..12> 00 counter 0 Disabled + * <11..10> 11 BRG1 Input is TxC Pin + * <9..8> 11 BRG0 Input is TxC Pin + * <7..6> 01 DPLL Input is BRG1 Output + * <5..3> 100 TxCLK comes from BRG0 + * <2..0> 100 RxCLK comes from BRG0 + * + * 0000 1111 0110 0100 = 0x0f64 + */ + + usc_OutReg( info, CMCR, 0x0f64 ); + + /* Write 16-bit Time Constant for BRG0 */ + /* use clock speed if available, otherwise use 8 for diagnostics */ + if (info->params.clock_speed) { + if (info->bus_type == MGSL_BUS_TYPE_PCI) + usc_OutReg(info, TC0R, (u16)((11059200/info->params.clock_speed)-1)); + else + usc_OutReg(info, TC0R, (u16)((14745600/info->params.clock_speed)-1)); + } else + usc_OutReg(info, TC0R, (u16)8); + + /* Hardware Configuration Register (HCR) Clear Bit 1, BRG0 + mode = Continuous Set Bit 0 to enable BRG0. */ + usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); + + /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ + usc_OutReg(info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004)); + + /* set Internal Data loopback mode */ + info->loopback_bits = 0x300; + outw( 0x0300, info->io_base + CCAR ); + } else { + /* enable external TXD output */ + usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7+BIT6)); + + /* clear Internal Data loopback mode */ + info->loopback_bits = 0; + outw( 0,info->io_base + CCAR ); + } + +} /* end of usc_enable_loopback() */ + +/* usc_enable_aux_clock() + * + * Enabled the AUX clock output at the specified frequency. + * + * Arguments: + * + * info pointer to device extension + * data_rate data rate of clock in bits per second + * A data rate of 0 disables the AUX clock. + * + * Return Value: None + */ +static void usc_enable_aux_clock( struct mgsl_struct *info, u32 data_rate ) +{ + u32 XtalSpeed; + u16 Tc; + + if ( data_rate ) { + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + XtalSpeed = 11059200; + else + XtalSpeed = 14745600; + + + /* Tc = (Xtal/Speed) - 1 */ + /* If twice the remainder of (Xtal/Speed) is greater than Speed */ + /* then rounding up gives a more precise time constant. Instead */ + /* of rounding up and then subtracting 1 we just don't subtract */ + /* the one in this case. */ + + + Tc = (u16)(XtalSpeed/data_rate); + if ( !(((XtalSpeed % data_rate) * 2) / data_rate) ) + Tc--; + + /* Write 16-bit Time Constant for BRG0 */ + usc_OutReg( info, TC0R, Tc ); + + /* + * Hardware Configuration Register (HCR) + * Clear Bit 1, BRG0 mode = Continuous + * Set Bit 0 to enable BRG0. + */ + + usc_OutReg( info, HCR, (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); + + /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ + usc_OutReg( info, IOCR, (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); + } else { + /* data rate == 0 so turn off BRG0 */ + usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); + } + +} /* end of usc_enable_aux_clock() */ + +/* + * + * usc_process_rxoverrun_sync() + * + * This function processes a receive overrun by resetting the + * receive DMA buffers and issuing a Purge Rx FIFO command + * to allow the receiver to continue receiving. + * + * Arguments: + * + * info pointer to device extension + * + * Return Value: None + */ +static void usc_process_rxoverrun_sync( struct mgsl_struct *info ) +{ + int start_index; + int end_index; + int frame_start_index; + int start_of_frame_found = FALSE; + int end_of_frame_found = FALSE; + int reprogram_dma = FALSE; + + DMABUFFERENTRY *buffer_list = info->rx_buffer_list; + u32 phys_addr; + + usc_DmaCmd( info, DmaCmd_PauseRxChannel ); + usc_RCmd( info, RCmd_EnterHuntmode ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + /* CurrentRxBuffer points to the 1st buffer of the next */ + /* possibly available receive frame. */ + + frame_start_index = start_index = end_index = info->current_rx_buffer; + + /* Search for an unfinished string of buffers. This means */ + /* that a receive frame started (at least one buffer with */ + /* count set to zero) but there is no terminiting buffer */ + /* (status set to non-zero). */ + + while( !buffer_list[end_index].count ) + { + /* Count field has been reset to zero by 16C32. */ + /* This buffer is currently in use. */ + + if ( !start_of_frame_found ) + { + start_of_frame_found = TRUE; + frame_start_index = end_index; + end_of_frame_found = FALSE; + } + + if ( buffer_list[end_index].status ) + { + /* Status field has been set by 16C32. */ + /* This is the last buffer of a received frame. */ + + /* We want to leave the buffers for this frame intact. */ + /* Move on to next possible frame. */ + + start_of_frame_found = FALSE; + end_of_frame_found = TRUE; + } + + /* advance to next buffer entry in linked list */ + end_index++; + if ( end_index == info->rx_buffer_count ) + end_index = 0; + + if ( start_index == end_index ) + { + /* The entire list has been searched with all Counts == 0 and */ + /* all Status == 0. The receive buffers are */ + /* completely screwed, reset all receive buffers! */ + mgsl_reset_rx_dma_buffers( info ); + frame_start_index = 0; + start_of_frame_found = FALSE; + reprogram_dma = TRUE; + break; + } + } + + if ( start_of_frame_found && !end_of_frame_found ) + { + /* There is an unfinished string of receive DMA buffers */ + /* as a result of the receiver overrun. */ + + /* Reset the buffers for the unfinished frame */ + /* and reprogram the receive DMA controller to start */ + /* at the 1st buffer of unfinished frame. */ + + start_index = frame_start_index; + + do + { + *((unsigned long *)&(info->rx_buffer_list[start_index++].count)) = DMABUFFERSIZE; + + /* Adjust index for wrap around. */ + if ( start_index == info->rx_buffer_count ) + start_index = 0; + + } while( start_index != end_index ); + + reprogram_dma = TRUE; + } + + if ( reprogram_dma ) + { + usc_UnlatchRxstatusBits(info,RXSTATUS_ALL); + usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS); + usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS); + + usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); + + /* This empties the receive FIFO and loads the RCC with RCLR */ + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + + /* program 16C32 with physical address of 1st DMA buffer entry */ + phys_addr = info->rx_buffer_list[frame_start_index].phys_entry; + usc_OutDmaReg( info, NRARL, (u16)phys_addr ); + usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); + usc_EnableInterrupts( info, RECEIVE_STATUS ); + + /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ + /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ + + usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 ); + usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); + usc_DmaCmd( info, DmaCmd_InitRxChannel ); + if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) + usc_EnableReceiver(info,ENABLE_AUTO_DCD); + else + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + } + else + { + /* This empties the receive FIFO and loads the RCC with RCLR */ + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + } + +} /* end of usc_process_rxoverrun_sync() */ + +/* usc_stop_receiver() + * + * Disable USC receiver + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_stop_receiver( struct mgsl_struct *info ) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_stop_receiver(%s)\n", + __FILE__,__LINE__, info->device_name ); + + /* Disable receive DMA channel. */ + /* This also disables receive DMA channel interrupts */ + usc_DmaCmd( info, DmaCmd_ResetRxChannel ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); + usc_DisableInterrupts( info, RECEIVE_DATA + RECEIVE_STATUS ); + + usc_EnableReceiver(info,DISABLE_UNCONDITIONAL); + + /* This empties the receive FIFO and loads the RCC with RCLR */ + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + info->rx_enabled = 0; + info->rx_overflow = 0; + info->rx_rcc_underrun = 0; + +} /* end of stop_receiver() */ + +/* usc_start_receiver() + * + * Enable the USC receiver + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_start_receiver( struct mgsl_struct *info ) +{ + u32 phys_addr; + + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_start_receiver(%s)\n", + __FILE__,__LINE__, info->device_name ); + + mgsl_reset_rx_dma_buffers( info ); + usc_stop_receiver( info ); + + usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) ); + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + if ( info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW ) { + /* DMA mode Transfers */ + /* Program the DMA controller. */ + /* Enable the DMA controller end of buffer interrupt. */ + + /* program 16C32 with physical address of 1st DMA buffer entry */ + phys_addr = info->rx_buffer_list[0].phys_entry; + usc_OutDmaReg( info, NRARL, (u16)phys_addr ); + usc_OutDmaReg( info, NRARU, (u16)(phys_addr >> 16) ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_DATA + RECEIVE_STATUS ); + usc_EnableInterrupts( info, RECEIVE_STATUS ); + + /* 1. Arm End of Buffer (EOB) Receive DMA Interrupt (BIT2 of RDIAR) */ + /* 2. Enable Receive DMA Interrupts (BIT1 of DICR) */ + + usc_OutDmaReg( info, RDIAR, BIT3 + BIT2 ); + usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT1) ); + usc_DmaCmd( info, DmaCmd_InitRxChannel ); + if ( info->params.flags & HDLC_FLAG_AUTO_DCD ) + usc_EnableReceiver(info,ENABLE_AUTO_DCD); + else + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + } else { + usc_UnlatchRxstatusBits(info, RXSTATUS_ALL); + usc_ClearIrqPendingBits(info, RECEIVE_DATA + RECEIVE_STATUS); + usc_EnableInterrupts(info, RECEIVE_DATA); + + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + usc_RCmd( info, RCmd_EnterHuntmode ); + + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + } + + usc_OutReg( info, CCSR, 0x1020 ); + + info->rx_enabled = 1; + +} /* end of usc_start_receiver() */ + +/* usc_start_transmitter() + * + * Enable the USC transmitter and send a transmit frame if + * one is loaded in the DMA buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_start_transmitter( struct mgsl_struct *info ) +{ + u32 phys_addr; + unsigned int FrameSize; + + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_start_transmitter(%s)\n", + __FILE__,__LINE__, info->device_name ); + + if ( info->xmit_cnt ) { + + /* If auto RTS enabled and RTS is inactive, then assert */ + /* RTS and set a flag indicating that the driver should */ + /* negate RTS when the transmission completes. */ + + info->drop_rts_on_tx_done = 0; + + if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) { + usc_get_serial_signals( info ); + if ( !(info->serial_signals & SerialSignal_RTS) ) { + info->serial_signals |= SerialSignal_RTS; + usc_set_serial_signals( info ); + info->drop_rts_on_tx_done = 1; + } + } + + + if ( info->params.mode == MGSL_MODE_ASYNC ) { + if ( !info->tx_active ) { + usc_UnlatchTxstatusBits(info, TXSTATUS_ALL); + usc_ClearIrqPendingBits(info, TRANSMIT_STATUS + TRANSMIT_DATA); + usc_EnableInterrupts(info, TRANSMIT_DATA); + usc_load_txfifo(info); + } + } else { + /* Disable transmit DMA controller while programming. */ + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + + /* Transmit DMA buffer is loaded, so program USC */ + /* to send the frame contained in the buffers. */ + + FrameSize = info->tx_buffer_list[info->start_tx_dma_buffer].rcc; + + /* if operating in Raw sync mode, reset the rcc component + * of the tx dma buffer entry, otherwise, the serial controller + * will send a closing sync char after this count. + */ + if ( info->params.mode == MGSL_MODE_RAW ) + info->tx_buffer_list[info->start_tx_dma_buffer].rcc = 0; + + /* Program the Transmit Character Length Register (TCLR) */ + /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ + usc_OutReg( info, TCLR, (u16)FrameSize ); + + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + /* Program the address of the 1st DMA Buffer Entry in linked list */ + phys_addr = info->tx_buffer_list[info->start_tx_dma_buffer].phys_entry; + usc_OutDmaReg( info, NTARL, (u16)phys_addr ); + usc_OutDmaReg( info, NTARU, (u16)(phys_addr >> 16) ); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + usc_EnableInterrupts( info, TRANSMIT_STATUS ); + + if ( info->params.mode == MGSL_MODE_RAW && + info->num_tx_dma_buffers > 1 ) { + /* When running external sync mode, attempt to 'stream' transmit */ + /* by filling tx dma buffers as they become available. To do this */ + /* we need to enable Tx DMA EOB Status interrupts : */ + /* */ + /* 1. Arm End of Buffer (EOB) Transmit DMA Interrupt (BIT2 of TDIAR) */ + /* 2. Enable Transmit DMA Interrupts (BIT0 of DICR) */ + + usc_OutDmaReg( info, TDIAR, BIT2|BIT3 ); + usc_OutDmaReg( info, DICR, (u16)(usc_InDmaReg(info,DICR) | BIT0) ); + } + + /* Initialize Transmit DMA Channel */ + usc_DmaCmd( info, DmaCmd_InitTxChannel ); + + usc_TCmd( info, TCmd_SendFrame ); + + info->tx_timer.expires = jiffies + msecs_to_jiffies(5000); + add_timer(&info->tx_timer); + } + info->tx_active = 1; + } + + if ( !info->tx_enabled ) { + info->tx_enabled = 1; + if ( info->params.flags & HDLC_FLAG_AUTO_CTS ) + usc_EnableTransmitter(info,ENABLE_AUTO_CTS); + else + usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); + } + +} /* end of usc_start_transmitter() */ + +/* usc_stop_transmitter() + * + * Stops the transmitter and DMA + * + * Arguments: info pointer to device isntance data + * Return Value: None + */ +static void usc_stop_transmitter( struct mgsl_struct *info ) +{ + if (debug_level >= DEBUG_LEVEL_ISR) + printk("%s(%d):usc_stop_transmitter(%s)\n", + __FILE__,__LINE__, info->device_name ); + + del_timer(&info->tx_timer); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA ); + usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA ); + + usc_EnableTransmitter(info,DISABLE_UNCONDITIONAL); + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + info->tx_enabled = 0; + info->tx_active = 0; + +} /* end of usc_stop_transmitter() */ + +/* usc_load_txfifo() + * + * Fill the transmit FIFO until the FIFO is full or + * there is no more data to load. + * + * Arguments: info pointer to device extension (instance data) + * Return Value: None + */ +static void usc_load_txfifo( struct mgsl_struct *info ) +{ + int Fifocount; + u8 TwoBytes[2]; + + if ( !info->xmit_cnt && !info->x_char ) + return; + + /* Select transmit FIFO status readback in TICR */ + usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); + + /* load the Transmit FIFO until FIFOs full or all data sent */ + + while( (Fifocount = usc_InReg(info, TICR) >> 8) && info->xmit_cnt ) { + /* there is more space in the transmit FIFO and */ + /* there is more data in transmit buffer */ + + if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) { + /* write a 16-bit word from transmit buffer to 16C32 */ + + TwoBytes[0] = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + TwoBytes[1] = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + + outw( *((u16 *)TwoBytes), info->io_base + DATAREG); + + info->xmit_cnt -= 2; + info->icount.tx += 2; + } else { + /* only 1 byte left to transmit or 1 FIFO slot left */ + + outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY), + info->io_base + CCAR ); + + if (info->x_char) { + /* transmit pending high priority char */ + outw( info->x_char,info->io_base + CCAR ); + info->x_char = 0; + } else { + outw( info->xmit_buf[info->xmit_tail++],info->io_base + CCAR ); + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + info->icount.tx++; + } + } + +} /* end of usc_load_txfifo() */ + +/* usc_reset() + * + * Reset the adapter to a known state and prepare it for further use. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_reset( struct mgsl_struct *info ) +{ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) { + int i; + u32 readval; + + /* Set BIT30 of Misc Control Register */ + /* (Local Control Register 0x50) to force reset of USC. */ + + volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50); + u32 *LCR0BRDR = (u32 *)(info->lcr_base + 0x28); + + info->misc_ctrl_value |= BIT30; + *MiscCtrl = info->misc_ctrl_value; + + /* + * Force at least 170ns delay before clearing + * reset bit. Each read from LCR takes at least + * 30ns so 10 times for 300ns to be safe. + */ + for(i=0;i<10;i++) + readval = *MiscCtrl; + + info->misc_ctrl_value &= ~BIT30; + *MiscCtrl = info->misc_ctrl_value; + + *LCR0BRDR = BUS_DESCRIPTOR( + 1, // Write Strobe Hold (0-3) + 2, // Write Strobe Delay (0-3) + 2, // Read Strobe Delay (0-3) + 0, // NWDD (Write data-data) (0-3) + 4, // NWAD (Write Addr-data) (0-31) + 0, // NXDA (Read/Write Data-Addr) (0-3) + 0, // NRDD (Read Data-Data) (0-3) + 5 // NRAD (Read Addr-Data) (0-31) + ); + } else { + /* do HW reset */ + outb( 0,info->io_base + 8 ); + } + + info->mbre_bit = 0; + info->loopback_bits = 0; + info->usc_idle_mode = 0; + + /* + * Program the Bus Configuration Register (BCR) + * + * <15> 0 Don't use separate address + * <14..6> 0 reserved + * <5..4> 00 IAckmode = Default, don't care + * <3> 1 Bus Request Totem Pole output + * <2> 1 Use 16 Bit data bus + * <1> 0 IRQ Totem Pole output + * <0> 0 Don't Shift Right Addr + * + * 0000 0000 0000 1100 = 0x000c + * + * By writing to io_base + SDPIN the Wait/Ack pin is + * programmed to work as a Wait pin. + */ + + outw( 0x000c,info->io_base + SDPIN ); + + + outw( 0,info->io_base ); + outw( 0,info->io_base + CCAR ); + + /* select little endian byte ordering */ + usc_RTCmd( info, RTCmd_SelectLittleEndian ); + + + /* Port Control Register (PCR) + * + * <15..14> 11 Port 7 is Output (~DMAEN, Bit 14 : 0 = Enabled) + * <13..12> 11 Port 6 is Output (~INTEN, Bit 12 : 0 = Enabled) + * <11..10> 00 Port 5 is Input (No Connect, Don't Care) + * <9..8> 00 Port 4 is Input (No Connect, Don't Care) + * <7..6> 11 Port 3 is Output (~RTS, Bit 6 : 0 = Enabled ) + * <5..4> 11 Port 2 is Output (~DTR, Bit 4 : 0 = Enabled ) + * <3..2> 01 Port 1 is Input (Dedicated RxC) + * <1..0> 01 Port 0 is Input (Dedicated TxC) + * + * 1111 0000 1111 0101 = 0xf0f5 + */ + + usc_OutReg( info, PCR, 0xf0f5 ); + + + /* + * Input/Output Control Register + * + * <15..14> 00 CTS is active low input + * <13..12> 00 DCD is active low input + * <11..10> 00 TxREQ pin is input (DSR) + * <9..8> 00 RxREQ pin is input (RI) + * <7..6> 00 TxD is output (Transmit Data) + * <5..3> 000 TxC Pin in Input (14.7456MHz Clock) + * <2..0> 100 RxC is Output (drive with BRG0) + * + * 0000 0000 0000 0100 = 0x0004 + */ + + usc_OutReg( info, IOCR, 0x0004 ); + +} /* end of usc_reset() */ + +/* usc_set_async_mode() + * + * Program adapter for asynchronous communications. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_set_async_mode( struct mgsl_struct *info ) +{ + u16 RegValue; + + /* disable interrupts while programming USC */ + usc_DisableMasterIrqBit( info ); + + outw( 0, info->io_base ); /* clear Master Bus Enable (DCAR) */ + usc_DmaCmd( info, DmaCmd_ResetAllChannels ); /* disable both DMA channels */ + + usc_loopback_frame( info ); + + /* Channel mode Register (CMR) + * + * <15..14> 00 Tx Sub modes, 00 = 1 Stop Bit + * <13..12> 00 00 = 16X Clock + * <11..8> 0000 Transmitter mode = Asynchronous + * <7..6> 00 reserved? + * <5..4> 00 Rx Sub modes, 00 = 16X Clock + * <3..0> 0000 Receiver mode = Asynchronous + * + * 0000 0000 0000 0000 = 0x0 + */ + + RegValue = 0; + if ( info->params.stop_bits != 1 ) + RegValue |= BIT14; + usc_OutReg( info, CMR, RegValue ); + + + /* Receiver mode Register (RMR) + * + * <15..13> 000 encoding = None + * <12..08> 00000 reserved (Sync Only) + * <7..6> 00 Even parity + * <5> 0 parity disabled + * <4..2> 000 Receive Char Length = 8 bits + * <1..0> 00 Disable Receiver + * + * 0000 0000 0000 0000 = 0x0 + */ + + RegValue = 0; + + if ( info->params.data_bits != 8 ) + RegValue |= BIT4+BIT3+BIT2; + + if ( info->params.parity != ASYNC_PARITY_NONE ) { + RegValue |= BIT5; + if ( info->params.parity != ASYNC_PARITY_ODD ) + RegValue |= BIT6; + } + + usc_OutReg( info, RMR, RegValue ); + + + /* Set IRQ trigger level */ + + usc_RCmd( info, RCmd_SelectRicrIntLevel ); + + + /* Receive Interrupt Control Register (RICR) + * + * <15..8> ? RxFIFO IRQ Request Level + * + * Note: For async mode the receive FIFO level must be set + * to 0 to aviod the situation where the FIFO contains fewer bytes + * than the trigger level and no more data is expected. + * + * <7> 0 Exited Hunt IA (Interrupt Arm) + * <6> 0 Idle Received IA + * <5> 0 Break/Abort IA + * <4> 0 Rx Bound IA + * <3> 0 Queued status reflects oldest byte in FIFO + * <2> 0 Abort/PE IA + * <1> 0 Rx Overrun IA + * <0> 0 Select TC0 value for readback + * + * 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB) + */ + + usc_OutReg( info, RICR, 0x0000 ); + + usc_UnlatchRxstatusBits( info, RXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, RECEIVE_STATUS ); + + + /* Transmit mode Register (TMR) + * + * <15..13> 000 encoding = None + * <12..08> 00000 reserved (Sync Only) + * <7..6> 00 Transmit parity Even + * <5> 0 Transmit parity Disabled + * <4..2> 000 Tx Char Length = 8 bits + * <1..0> 00 Disable Transmitter + * + * 0000 0000 0000 0000 = 0x0 + */ + + RegValue = 0; + + if ( info->params.data_bits != 8 ) + RegValue |= BIT4+BIT3+BIT2; + + if ( info->params.parity != ASYNC_PARITY_NONE ) { + RegValue |= BIT5; + if ( info->params.parity != ASYNC_PARITY_ODD ) + RegValue |= BIT6; + } + + usc_OutReg( info, TMR, RegValue ); + + usc_set_txidle( info ); + + + /* Set IRQ trigger level */ + + usc_TCmd( info, TCmd_SelectTicrIntLevel ); + + + /* Transmit Interrupt Control Register (TICR) + * + * <15..8> ? Transmit FIFO IRQ Level + * <7> 0 Present IA (Interrupt Arm) + * <6> 1 Idle Sent IA + * <5> 0 Abort Sent IA + * <4> 0 EOF/EOM Sent IA + * <3> 0 CRC Sent IA + * <2> 0 1 = Wait for SW Trigger to Start Frame + * <1> 0 Tx Underrun IA + * <0> 0 TC0 constant on read back + * + * 0000 0000 0100 0000 = 0x0040 + */ + + usc_OutReg( info, TICR, 0x1f40 ); + + usc_UnlatchTxstatusBits( info, TXSTATUS_ALL ); + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS ); + + usc_enable_async_clock( info, info->params.data_rate ); + + + /* Channel Control/status Register (CCSR) + * + * <15> X RCC FIFO Overflow status (RO) + * <14> X RCC FIFO Not Empty status (RO) + * <13> 0 1 = Clear RCC FIFO (WO) + * <12> X DPLL in Sync status (RO) + * <11> X DPLL 2 Missed Clocks status (RO) + * <10> X DPLL 1 Missed Clock status (RO) + * <9..8> 00 DPLL Resync on rising and falling edges (RW) + * <7> X SDLC Loop On status (RO) + * <6> X SDLC Loop Send status (RO) + * <5> 1 Bypass counters for TxClk and RxClk (RW) + * <4..2> 000 Last Char of SDLC frame has 8 bits (RW) + * <1..0> 00 reserved + * + * 0000 0000 0010 0000 = 0x0020 + */ + + usc_OutReg( info, CCSR, 0x0020 ); + + usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA + + RECEIVE_DATA + RECEIVE_STATUS ); + + usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA + + RECEIVE_DATA + RECEIVE_STATUS ); + + usc_EnableMasterIrqBit( info ); + + if (info->bus_type == MGSL_BUS_TYPE_ISA) { + /* Enable INTEN (Port 6, Bit12) */ + /* This connects the IRQ request signal to the ISA bus */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12)); + } + +} /* end of usc_set_async_mode() */ + +/* usc_loopback_frame() + * + * Loop back a small (2 byte) dummy SDLC frame. + * Interrupts and DMA are NOT used. The purpose of this is to + * clear any 'stale' status info left over from running in async mode. + * + * The 16C32 shows the strange behaviour of marking the 1st + * received SDLC frame with a CRC error even when there is no + * CRC error. To get around this a small dummy from of 2 bytes + * is looped back when switching from async to sync mode. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_loopback_frame( struct mgsl_struct *info ) +{ + int i; + unsigned long oldmode = info->params.mode; + + info->params.mode = MGSL_MODE_HDLC; + + usc_DisableMasterIrqBit( info ); + + usc_set_sdlc_mode( info ); + usc_enable_loopback( info, 1 ); + + /* Write 16-bit Time Constant for BRG0 */ + usc_OutReg( info, TC0R, 0 ); + + /* Channel Control Register (CCR) + * + * <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs) + * <13> 0 Trigger Tx on SW Command Disabled + * <12> 0 Flag Preamble Disabled + * <11..10> 00 Preamble Length = 8-Bits + * <9..8> 01 Preamble Pattern = flags + * <7..6> 10 Don't use 32-bit Rx status Blocks (RSBs) + * <5> 0 Trigger Rx on SW Command Disabled + * <4..0> 0 reserved + * + * 0000 0001 0000 0000 = 0x0100 + */ + + usc_OutReg( info, CCR, 0x0100 ); + + /* SETUP RECEIVER */ + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + usc_EnableReceiver(info,ENABLE_UNCONDITIONAL); + + /* SETUP TRANSMITTER */ + /* Program the Transmit Character Length Register (TCLR) */ + /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ + usc_OutReg( info, TCLR, 2 ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + /* unlatch Tx status bits, and start transmit channel. */ + usc_UnlatchTxstatusBits(info,TXSTATUS_ALL); + outw(0,info->io_base + DATAREG); + + /* ENABLE TRANSMITTER */ + usc_TCmd( info, TCmd_SendFrame ); + usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL); + + /* WAIT FOR RECEIVE COMPLETE */ + for (i=0 ; i<1000 ; i++) + if (usc_InReg( info, RCSR ) & (BIT8 + BIT4 + BIT3 + BIT1)) + break; + + /* clear Internal Data loopback mode */ + usc_enable_loopback(info, 0); + + usc_EnableMasterIrqBit(info); + + info->params.mode = oldmode; + +} /* end of usc_loopback_frame() */ + +/* usc_set_sync_mode() Programs the USC for SDLC communications. + * + * Arguments: info pointer to adapter info structure + * Return Value: None + */ +static void usc_set_sync_mode( struct mgsl_struct *info ) +{ + usc_loopback_frame( info ); + usc_set_sdlc_mode( info ); + + if (info->bus_type == MGSL_BUS_TYPE_ISA) { + /* Enable INTEN (Port 6, Bit12) */ + /* This connects the IRQ request signal to the ISA bus */ + usc_OutReg(info, PCR, (u16)((usc_InReg(info, PCR) | BIT13) & ~BIT12)); + } + + usc_enable_aux_clock(info, info->params.clock_speed); + + if (info->params.loopback) + usc_enable_loopback(info,1); + +} /* end of mgsl_set_sync_mode() */ + +/* usc_set_txidle() Set the HDLC idle mode for the transmitter. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_set_txidle( struct mgsl_struct *info ) +{ + u16 usc_idle_mode = IDLEMODE_FLAGS; + + /* Map API idle mode to USC register bits */ + + switch( info->idle_mode ){ + case HDLC_TXIDLE_FLAGS: usc_idle_mode = IDLEMODE_FLAGS; break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: usc_idle_mode = IDLEMODE_ALT_ONE_ZERO; break; + case HDLC_TXIDLE_ZEROS: usc_idle_mode = IDLEMODE_ZERO; break; + case HDLC_TXIDLE_ONES: usc_idle_mode = IDLEMODE_ONE; break; + case HDLC_TXIDLE_ALT_MARK_SPACE: usc_idle_mode = IDLEMODE_ALT_MARK_SPACE; break; + case HDLC_TXIDLE_SPACE: usc_idle_mode = IDLEMODE_SPACE; break; + case HDLC_TXIDLE_MARK: usc_idle_mode = IDLEMODE_MARK; break; + } + + info->usc_idle_mode = usc_idle_mode; + //usc_OutReg(info, TCSR, usc_idle_mode); + info->tcsr_value &= ~IDLEMODE_MASK; /* clear idle mode bits */ + info->tcsr_value += usc_idle_mode; + usc_OutReg(info, TCSR, info->tcsr_value); + + /* + * if SyncLink WAN adapter is running in external sync mode, the + * transmitter has been set to Monosync in order to try to mimic + * a true raw outbound bit stream. Monosync still sends an open/close + * sync char at the start/end of a frame. Try to match those sync + * patterns to the idle mode set here + */ + if ( info->params.mode == MGSL_MODE_RAW ) { + unsigned char syncpat = 0; + switch( info->idle_mode ) { + case HDLC_TXIDLE_FLAGS: + syncpat = 0x7e; + break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: + syncpat = 0x55; + break; + case HDLC_TXIDLE_ZEROS: + case HDLC_TXIDLE_SPACE: + syncpat = 0x00; + break; + case HDLC_TXIDLE_ONES: + case HDLC_TXIDLE_MARK: + syncpat = 0xff; + break; + case HDLC_TXIDLE_ALT_MARK_SPACE: + syncpat = 0xaa; + break; + } + + usc_SetTransmitSyncChars(info,syncpat,syncpat); + } + +} /* end of usc_set_txidle() */ + +/* usc_get_serial_signals() + * + * Query the adapter for the state of the V24 status (input) signals. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_get_serial_signals( struct mgsl_struct *info ) +{ + u16 status; + + /* clear all serial signals except DTR and RTS */ + info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS; + + /* Read the Misc Interrupt status Register (MISR) to get */ + /* the V24 status signals. */ + + status = usc_InReg( info, MISR ); + + /* set serial signal bits to reflect MISR */ + + if ( status & MISCSTATUS_CTS ) + info->serial_signals |= SerialSignal_CTS; + + if ( status & MISCSTATUS_DCD ) + info->serial_signals |= SerialSignal_DCD; + + if ( status & MISCSTATUS_RI ) + info->serial_signals |= SerialSignal_RI; + + if ( status & MISCSTATUS_DSR ) + info->serial_signals |= SerialSignal_DSR; + +} /* end of usc_get_serial_signals() */ + +/* usc_set_serial_signals() + * + * Set the state of DTR and RTS based on contents of + * serial_signals member of device extension. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void usc_set_serial_signals( struct mgsl_struct *info ) +{ + u16 Control; + unsigned char V24Out = info->serial_signals; + + /* get the current value of the Port Control Register (PCR) */ + + Control = usc_InReg( info, PCR ); + + if ( V24Out & SerialSignal_RTS ) + Control &= ~(BIT6); + else + Control |= BIT6; + + if ( V24Out & SerialSignal_DTR ) + Control &= ~(BIT4); + else + Control |= BIT4; + + usc_OutReg( info, PCR, Control ); + +} /* end of usc_set_serial_signals() */ + +/* usc_enable_async_clock() + * + * Enable the async clock at the specified frequency. + * + * Arguments: info pointer to device instance data + * data_rate data rate of clock in bps + * 0 disables the AUX clock. + * Return Value: None + */ +static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate ) +{ + if ( data_rate ) { + /* + * Clock mode Control Register (CMCR) + * + * <15..14> 00 counter 1 Disabled + * <13..12> 00 counter 0 Disabled + * <11..10> 11 BRG1 Input is TxC Pin + * <9..8> 11 BRG0 Input is TxC Pin + * <7..6> 01 DPLL Input is BRG1 Output + * <5..3> 100 TxCLK comes from BRG0 + * <2..0> 100 RxCLK comes from BRG0 + * + * 0000 1111 0110 0100 = 0x0f64 + */ + + usc_OutReg( info, CMCR, 0x0f64 ); + + + /* + * Write 16-bit Time Constant for BRG0 + * Time Constant = (ClkSpeed / data_rate) - 1 + * ClkSpeed = 921600 (ISA), 691200 (PCI) + */ + + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + usc_OutReg( info, TC0R, (u16)((691200/data_rate) - 1) ); + else + usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) ); + + + /* + * Hardware Configuration Register (HCR) + * Clear Bit 1, BRG0 mode = Continuous + * Set Bit 0 to enable BRG0. + */ + + usc_OutReg( info, HCR, + (u16)((usc_InReg( info, HCR ) & ~BIT1) | BIT0) ); + + + /* Input/Output Control Reg, <2..0> = 100, Drive RxC pin with BRG0 */ + + usc_OutReg( info, IOCR, + (u16)((usc_InReg(info, IOCR) & 0xfff8) | 0x0004) ); + } else { + /* data rate == 0 so turn off BRG0 */ + usc_OutReg( info, HCR, (u16)(usc_InReg( info, HCR ) & ~BIT0) ); + } + +} /* end of usc_enable_async_clock() */ + +/* + * Buffer Structures: + * + * Normal memory access uses virtual addresses that can make discontiguous + * physical memory pages appear to be contiguous in the virtual address + * space (the processors memory mapping handles the conversions). + * + * DMA transfers require physically contiguous memory. This is because + * the DMA system controller and DMA bus masters deal with memory using + * only physical addresses. + * + * This causes a problem under Windows NT when large DMA buffers are + * needed. Fragmentation of the nonpaged pool prevents allocations of + * physically contiguous buffers larger than the PAGE_SIZE. + * + * However the 16C32 supports Bus Master Scatter/Gather DMA which + * allows DMA transfers to physically discontiguous buffers. Information + * about each data transfer buffer is contained in a memory structure + * called a 'buffer entry'. A list of buffer entries is maintained + * to track and control the use of the data transfer buffers. + * + * To support this strategy we will allocate sufficient PAGE_SIZE + * contiguous memory buffers to allow for the total required buffer + * space. + * + * The 16C32 accesses the list of buffer entries using Bus Master + * DMA. Control information is read from the buffer entries by the + * 16C32 to control data transfers. status information is written to + * the buffer entries by the 16C32 to indicate the status of completed + * transfers. + * + * The CPU writes control information to the buffer entries to control + * the 16C32 and reads status information from the buffer entries to + * determine information about received and transmitted frames. + * + * Because the CPU and 16C32 (adapter) both need simultaneous access + * to the buffer entries, the buffer entry memory is allocated with + * HalAllocateCommonBuffer(). This restricts the size of the buffer + * entry list to PAGE_SIZE. + * + * The actual data buffers on the other hand will only be accessed + * by the CPU or the adapter but not by both simultaneously. This allows + * Scatter/Gather packet based DMA procedures for using physically + * discontiguous pages. + */ + +/* + * mgsl_reset_tx_dma_buffers() + * + * Set the count for all transmit buffers to 0 to indicate the + * buffer is available for use and set the current buffer to the + * first buffer. This effectively makes all buffers free and + * discards any data in buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_reset_tx_dma_buffers( struct mgsl_struct *info ) +{ + unsigned int i; + + for ( i = 0; i < info->tx_buffer_count; i++ ) { + *((unsigned long *)&(info->tx_buffer_list[i].count)) = 0; + } + + info->current_tx_buffer = 0; + info->start_tx_dma_buffer = 0; + info->tx_dma_buffers_used = 0; + + info->get_tx_holding_index = 0; + info->put_tx_holding_index = 0; + info->tx_holding_count = 0; + +} /* end of mgsl_reset_tx_dma_buffers() */ + +/* + * num_free_tx_dma_buffers() + * + * returns the number of free tx dma buffers available + * + * Arguments: info pointer to device instance data + * Return Value: number of free tx dma buffers + */ +static int num_free_tx_dma_buffers(struct mgsl_struct *info) +{ + return info->tx_buffer_count - info->tx_dma_buffers_used; +} + +/* + * mgsl_reset_rx_dma_buffers() + * + * Set the count for all receive buffers to DMABUFFERSIZE + * and set the current buffer to the first buffer. This effectively + * makes all buffers free and discards any data in buffers. + * + * Arguments: info pointer to device instance data + * Return Value: None + */ +static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info ) +{ + unsigned int i; + + for ( i = 0; i < info->rx_buffer_count; i++ ) { + *((unsigned long *)&(info->rx_buffer_list[i].count)) = DMABUFFERSIZE; +// info->rx_buffer_list[i].count = DMABUFFERSIZE; +// info->rx_buffer_list[i].status = 0; + } + + info->current_rx_buffer = 0; + +} /* end of mgsl_reset_rx_dma_buffers() */ + +/* + * mgsl_free_rx_frame_buffers() + * + * Free the receive buffers used by a received SDLC + * frame such that the buffers can be reused. + * + * Arguments: + * + * info pointer to device instance data + * StartIndex index of 1st receive buffer of frame + * EndIndex index of last receive buffer of frame + * + * Return Value: None + */ +static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex ) +{ + int Done = 0; + DMABUFFERENTRY *pBufEntry; + unsigned int Index; + + /* Starting with 1st buffer entry of the frame clear the status */ + /* field and set the count field to DMA Buffer Size. */ + + Index = StartIndex; + + while( !Done ) { + pBufEntry = &(info->rx_buffer_list[Index]); + + if ( Index == EndIndex ) { + /* This is the last buffer of the frame! */ + Done = 1; + } + + /* reset current buffer for reuse */ +// pBufEntry->status = 0; +// pBufEntry->count = DMABUFFERSIZE; + *((unsigned long *)&(pBufEntry->count)) = DMABUFFERSIZE; + + /* advance to next buffer entry in linked list */ + Index++; + if ( Index == info->rx_buffer_count ) + Index = 0; + } + + /* set current buffer to next buffer after last buffer of frame */ + info->current_rx_buffer = Index; + +} /* end of free_rx_frame_buffers() */ + +/* mgsl_get_rx_frame() + * + * This function attempts to return a received SDLC frame from the + * receive DMA buffers. Only frames received without errors are returned. + * + * Arguments: info pointer to device extension + * Return Value: 1 if frame returned, otherwise 0 + */ +static int mgsl_get_rx_frame(struct mgsl_struct *info) +{ + unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */ + unsigned short status; + DMABUFFERENTRY *pBufEntry; + unsigned int framesize = 0; + int ReturnCode = 0; + unsigned long flags; + struct tty_struct *tty = info->tty; + int return_frame = 0; + + /* + * current_rx_buffer points to the 1st buffer of the next available + * receive frame. To find the last buffer of the frame look for + * a non-zero status field in the buffer entries. (The status + * field is set by the 16C32 after completing a receive frame. + */ + + StartIndex = EndIndex = info->current_rx_buffer; + + while( !info->rx_buffer_list[EndIndex].status ) { + /* + * If the count field of the buffer entry is non-zero then + * this buffer has not been used. (The 16C32 clears the count + * field when it starts using the buffer.) If an unused buffer + * is encountered then there are no frames available. + */ + + if ( info->rx_buffer_list[EndIndex].count ) + goto Cleanup; + + /* advance to next buffer entry in linked list */ + EndIndex++; + if ( EndIndex == info->rx_buffer_count ) + EndIndex = 0; + + /* if entire list searched then no frame available */ + if ( EndIndex == StartIndex ) { + /* If this occurs then something bad happened, + * all buffers have been 'used' but none mark + * the end of a frame. Reset buffers and receiver. + */ + + if ( info->rx_enabled ){ + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + goto Cleanup; + } + } + + + /* check status of receive frame */ + + status = info->rx_buffer_list[EndIndex].status; + + if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN + + RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) { + if ( status & RXSTATUS_SHORT_FRAME ) + info->icount.rxshort++; + else if ( status & RXSTATUS_ABORT ) + info->icount.rxabort++; + else if ( status & RXSTATUS_OVERRUN ) + info->icount.rxover++; + else { + info->icount.rxcrc++; + if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) + return_frame = 1; + } + framesize = 0; +#ifdef CONFIG_HDLC + { + struct net_device_stats *stats = hdlc_stats(info->netdev); + stats->rx_errors++; + stats->rx_frame_errors++; + } +#endif + } else + return_frame = 1; + + if ( return_frame ) { + /* receive frame has no errors, get frame size. + * The frame size is the starting value of the RCC (which was + * set to 0xffff) minus the ending value of the RCC (decremented + * once for each receive character) minus 2 for the 16-bit CRC. + */ + + framesize = RCLRVALUE - info->rx_buffer_list[EndIndex].rcc; + + /* adjust frame size for CRC if any */ + if ( info->params.crc_type == HDLC_CRC_16_CCITT ) + framesize -= 2; + else if ( info->params.crc_type == HDLC_CRC_32_CCITT ) + framesize -= 4; + } + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n", + __FILE__,__LINE__,info->device_name,status,framesize); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr, + min_t(int, framesize, DMABUFFERSIZE),0); + + if (framesize) { + if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) && + ((framesize+1) > info->max_frame_size) ) || + (framesize > info->max_frame_size) ) + info->icount.rxlong++; + else { + /* copy dma buffer(s) to contiguous intermediate buffer */ + int copy_count = framesize; + int index = StartIndex; + unsigned char *ptmp = info->intermediate_rxbuffer; + + if ( !(status & RXSTATUS_CRC_ERROR)) + info->icount.rxok++; + + while(copy_count) { + int partial_count; + if ( copy_count > DMABUFFERSIZE ) + partial_count = DMABUFFERSIZE; + else + partial_count = copy_count; + + pBufEntry = &(info->rx_buffer_list[index]); + memcpy( ptmp, pBufEntry->virt_addr, partial_count ); + ptmp += partial_count; + copy_count -= partial_count; + + if ( ++index == info->rx_buffer_count ) + index = 0; + } + + if ( info->params.crc_type & HDLC_CRC_RETURN_EX ) { + ++framesize; + *ptmp = (status & RXSTATUS_CRC_ERROR ? + RX_CRC_ERROR : + RX_OK); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + printk("%s(%d):mgsl_get_rx_frame(%s) rx frame status=%d\n", + __FILE__,__LINE__,info->device_name, + *ptmp); + } + +#ifdef CONFIG_HDLC + if (info->netcount) + hdlcdev_rx(info,info->intermediate_rxbuffer,framesize); + else +#endif + ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); + } + } + /* Free the buffers used by this frame. */ + mgsl_free_rx_frame_buffers( info, StartIndex, EndIndex ); + + ReturnCode = 1; + +Cleanup: + + if ( info->rx_enabled && info->rx_overflow ) { + /* The receiver needs to restarted because of + * a receive overflow (buffer or FIFO). If the + * receive buffers are now empty, then restart receiver. + */ + + if ( !info->rx_buffer_list[EndIndex].status && + info->rx_buffer_list[EndIndex].count ) { + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + } + + return ReturnCode; + +} /* end of mgsl_get_rx_frame() */ + +/* mgsl_get_raw_rx_frame() + * + * This function attempts to return a received frame from the + * receive DMA buffers when running in external loop mode. In this mode, + * we will return at most one DMABUFFERSIZE frame to the application. + * The USC receiver is triggering off of DCD going active to start a new + * frame, and DCD going inactive to terminate the frame (similar to + * processing a closing flag character). + * + * In this routine, we will return DMABUFFERSIZE "chunks" at a time. + * If DCD goes inactive, the last Rx DMA Buffer will have a non-zero + * status field and the RCC field will indicate the length of the + * entire received frame. We take this RCC field and get the modulus + * of RCC and DMABUFFERSIZE to determine if number of bytes in the + * last Rx DMA buffer and return that last portion of the frame. + * + * Arguments: info pointer to device extension + * Return Value: 1 if frame returned, otherwise 0 + */ +static int mgsl_get_raw_rx_frame(struct mgsl_struct *info) +{ + unsigned int CurrentIndex, NextIndex; + unsigned short status; + DMABUFFERENTRY *pBufEntry; + unsigned int framesize = 0; + int ReturnCode = 0; + unsigned long flags; + struct tty_struct *tty = info->tty; + + /* + * current_rx_buffer points to the 1st buffer of the next available + * receive frame. The status field is set by the 16C32 after + * completing a receive frame. If the status field of this buffer + * is zero, either the USC is still filling this buffer or this + * is one of a series of buffers making up a received frame. + * + * If the count field of this buffer is zero, the USC is either + * using this buffer or has used this buffer. Look at the count + * field of the next buffer. If that next buffer's count is + * non-zero, the USC is still actively using the current buffer. + * Otherwise, if the next buffer's count field is zero, the + * current buffer is complete and the USC is using the next + * buffer. + */ + CurrentIndex = NextIndex = info->current_rx_buffer; + ++NextIndex; + if ( NextIndex == info->rx_buffer_count ) + NextIndex = 0; + + if ( info->rx_buffer_list[CurrentIndex].status != 0 || + (info->rx_buffer_list[CurrentIndex].count == 0 && + info->rx_buffer_list[NextIndex].count == 0)) { + /* + * Either the status field of this dma buffer is non-zero + * (indicating the last buffer of a receive frame) or the next + * buffer is marked as in use -- implying this buffer is complete + * and an intermediate buffer for this received frame. + */ + + status = info->rx_buffer_list[CurrentIndex].status; + + if ( status & (RXSTATUS_SHORT_FRAME + RXSTATUS_OVERRUN + + RXSTATUS_CRC_ERROR + RXSTATUS_ABORT) ) { + if ( status & RXSTATUS_SHORT_FRAME ) + info->icount.rxshort++; + else if ( status & RXSTATUS_ABORT ) + info->icount.rxabort++; + else if ( status & RXSTATUS_OVERRUN ) + info->icount.rxover++; + else + info->icount.rxcrc++; + framesize = 0; + } else { + /* + * A receive frame is available, get frame size and status. + * + * The frame size is the starting value of the RCC (which was + * set to 0xffff) minus the ending value of the RCC (decremented + * once for each receive character) minus 2 or 4 for the 16-bit + * or 32-bit CRC. + * + * If the status field is zero, this is an intermediate buffer. + * It's size is 4K. + * + * If the DMA Buffer Entry's Status field is non-zero, the + * receive operation completed normally (ie: DCD dropped). The + * RCC field is valid and holds the received frame size. + * It is possible that the RCC field will be zero on a DMA buffer + * entry with a non-zero status. This can occur if the total + * frame size (number of bytes between the time DCD goes active + * to the time DCD goes inactive) exceeds 65535 bytes. In this + * case the 16C32 has underrun on the RCC count and appears to + * stop updating this counter to let us know the actual received + * frame size. If this happens (non-zero status and zero RCC), + * simply return the entire RxDMA Buffer + */ + if ( status ) { + /* + * In the event that the final RxDMA Buffer is + * terminated with a non-zero status and the RCC + * field is zero, we interpret this as the RCC + * having underflowed (received frame > 65535 bytes). + * + * Signal the event to the user by passing back + * a status of RxStatus_CrcError returning the full + * buffer and let the app figure out what data is + * actually valid + */ + if ( info->rx_buffer_list[CurrentIndex].rcc ) + framesize = RCLRVALUE - info->rx_buffer_list[CurrentIndex].rcc; + else + framesize = DMABUFFERSIZE; + } + else + framesize = DMABUFFERSIZE; + } + + if ( framesize > DMABUFFERSIZE ) { + /* + * if running in raw sync mode, ISR handler for + * End Of Buffer events terminates all buffers at 4K. + * If this frame size is said to be >4K, get the + * actual number of bytes of the frame in this buffer. + */ + framesize = framesize % DMABUFFERSIZE; + } + + + if ( debug_level >= DEBUG_LEVEL_BH ) + printk("%s(%d):mgsl_get_raw_rx_frame(%s) status=%04X size=%d\n", + __FILE__,__LINE__,info->device_name,status,framesize); + + if ( debug_level >= DEBUG_LEVEL_DATA ) + mgsl_trace_block(info,info->rx_buffer_list[CurrentIndex].virt_addr, + min_t(int, framesize, DMABUFFERSIZE),0); + + if (framesize) { + /* copy dma buffer(s) to contiguous intermediate buffer */ + /* NOTE: we never copy more than DMABUFFERSIZE bytes */ + + pBufEntry = &(info->rx_buffer_list[CurrentIndex]); + memcpy( info->intermediate_rxbuffer, pBufEntry->virt_addr, framesize); + info->icount.rxok++; + + ldisc_receive_buf(tty, info->intermediate_rxbuffer, info->flag_buf, framesize); + } + + /* Free the buffers used by this frame. */ + mgsl_free_rx_frame_buffers( info, CurrentIndex, CurrentIndex ); + + ReturnCode = 1; + } + + + if ( info->rx_enabled && info->rx_overflow ) { + /* The receiver needs to restarted because of + * a receive overflow (buffer or FIFO). If the + * receive buffers are now empty, then restart receiver. + */ + + if ( !info->rx_buffer_list[CurrentIndex].status && + info->rx_buffer_list[CurrentIndex].count ) { + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_start_receiver(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + } + + return ReturnCode; + +} /* end of mgsl_get_raw_rx_frame() */ + +/* mgsl_load_tx_dma_buffer() + * + * Load the transmit DMA buffer with the specified data. + * + * Arguments: + * + * info pointer to device extension + * Buffer pointer to buffer containing frame to load + * BufferSize size in bytes of frame in Buffer + * + * Return Value: None + */ +static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info, + const char *Buffer, unsigned int BufferSize) +{ + unsigned short Copycount; + unsigned int i = 0; + DMABUFFERENTRY *pBufEntry; + + if ( debug_level >= DEBUG_LEVEL_DATA ) + mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1); + + if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { + /* set CMR:13 to start transmit when + * next GoAhead (abort) is received + */ + info->cmr_value |= BIT13; + } + + /* begin loading the frame in the next available tx dma + * buffer, remember it's starting location for setting + * up tx dma operation + */ + i = info->current_tx_buffer; + info->start_tx_dma_buffer = i; + + /* Setup the status and RCC (Frame Size) fields of the 1st */ + /* buffer entry in the transmit DMA buffer list. */ + + info->tx_buffer_list[i].status = info->cmr_value & 0xf000; + info->tx_buffer_list[i].rcc = BufferSize; + info->tx_buffer_list[i].count = BufferSize; + + /* Copy frame data from 1st source buffer to the DMA buffers. */ + /* The frame data may span multiple DMA buffers. */ + + while( BufferSize ){ + /* Get a pointer to next DMA buffer entry. */ + pBufEntry = &info->tx_buffer_list[i++]; + + if ( i == info->tx_buffer_count ) + i=0; + + /* Calculate the number of bytes that can be copied from */ + /* the source buffer to this DMA buffer. */ + if ( BufferSize > DMABUFFERSIZE ) + Copycount = DMABUFFERSIZE; + else + Copycount = BufferSize; + + /* Actually copy data from source buffer to DMA buffer. */ + /* Also set the data count for this individual DMA buffer. */ + if ( info->bus_type == MGSL_BUS_TYPE_PCI ) + mgsl_load_pci_memory(pBufEntry->virt_addr, Buffer,Copycount); + else + memcpy(pBufEntry->virt_addr, Buffer, Copycount); + + pBufEntry->count = Copycount; + + /* Advance source pointer and reduce remaining data count. */ + Buffer += Copycount; + BufferSize -= Copycount; + + ++info->tx_dma_buffers_used; + } + + /* remember next available tx dma buffer */ + info->current_tx_buffer = i; + +} /* end of mgsl_load_tx_dma_buffer() */ + +/* + * mgsl_register_test() + * + * Performs a register test of the 16C32. + * + * Arguments: info pointer to device instance data + * Return Value: TRUE if test passed, otherwise FALSE + */ +static BOOLEAN mgsl_register_test( struct mgsl_struct *info ) +{ + static unsigned short BitPatterns[] = + { 0x0000, 0xffff, 0xaaaa, 0x5555, 0x1234, 0x6969, 0x9696, 0x0f0f }; + static unsigned int Patterncount = sizeof(BitPatterns)/sizeof(unsigned short); + unsigned int i; + BOOLEAN rc = TRUE; + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset(info); + + /* Verify the reset state of some registers. */ + + if ( (usc_InReg( info, SICR ) != 0) || + (usc_InReg( info, IVR ) != 0) || + (usc_InDmaReg( info, DIVR ) != 0) ){ + rc = FALSE; + } + + if ( rc == TRUE ){ + /* Write bit patterns to various registers but do it out of */ + /* sync, then read back and verify values. */ + + for ( i = 0 ; i < Patterncount ; i++ ) { + usc_OutReg( info, TC0R, BitPatterns[i] ); + usc_OutReg( info, TC1R, BitPatterns[(i+1)%Patterncount] ); + usc_OutReg( info, TCLR, BitPatterns[(i+2)%Patterncount] ); + usc_OutReg( info, RCLR, BitPatterns[(i+3)%Patterncount] ); + usc_OutReg( info, RSR, BitPatterns[(i+4)%Patterncount] ); + usc_OutDmaReg( info, TBCR, BitPatterns[(i+5)%Patterncount] ); + + if ( (usc_InReg( info, TC0R ) != BitPatterns[i]) || + (usc_InReg( info, TC1R ) != BitPatterns[(i+1)%Patterncount]) || + (usc_InReg( info, TCLR ) != BitPatterns[(i+2)%Patterncount]) || + (usc_InReg( info, RCLR ) != BitPatterns[(i+3)%Patterncount]) || + (usc_InReg( info, RSR ) != BitPatterns[(i+4)%Patterncount]) || + (usc_InDmaReg( info, TBCR ) != BitPatterns[(i+5)%Patterncount]) ){ + rc = FALSE; + break; + } + } + } + + usc_reset(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return rc; + +} /* end of mgsl_register_test() */ + +/* mgsl_irq_test() Perform interrupt test of the 16C32. + * + * Arguments: info pointer to device instance data + * Return Value: TRUE if test passed, otherwise FALSE + */ +static BOOLEAN mgsl_irq_test( struct mgsl_struct *info ) +{ + unsigned long EndTime; + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset(info); + + /* + * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition. + * The ISR sets irq_occurred to 1. + */ + + info->irq_occurred = FALSE; + + /* Enable INTEN gate for ISA adapter (Port 6, Bit12) */ + /* Enable INTEN (Port 6, Bit12) */ + /* This connects the IRQ request signal to the ISA bus */ + /* on the ISA adapter. This has no effect for the PCI adapter */ + usc_OutReg( info, PCR, (unsigned short)((usc_InReg(info, PCR) | BIT13) & ~BIT12) ); + + usc_EnableMasterIrqBit(info); + usc_EnableInterrupts(info, IO_PIN); + usc_ClearIrqPendingBits(info, IO_PIN); + + usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED); + usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + EndTime=100; + while( EndTime-- && !info->irq_occurred ) { + msleep_interruptible(10); + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + if ( !info->irq_occurred ) + return FALSE; + else + return TRUE; + +} /* end of mgsl_irq_test() */ + +/* mgsl_dma_test() + * + * Perform a DMA test of the 16C32. A small frame is + * transmitted via DMA from a transmit buffer to a receive buffer + * using single buffer DMA mode. + * + * Arguments: info pointer to device instance data + * Return Value: TRUE if test passed, otherwise FALSE + */ +static BOOLEAN mgsl_dma_test( struct mgsl_struct *info ) +{ + unsigned short FifoLevel; + unsigned long phys_addr; + unsigned int FrameSize; + unsigned int i; + char *TmpPtr; + BOOLEAN rc = TRUE; + unsigned short status=0; + unsigned long EndTime; + unsigned long flags; + MGSL_PARAMS tmp_params; + + /* save current port options */ + memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS)); + /* load default port options */ + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + +#define TESTFRAMESIZE 40 + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* setup 16C32 for SDLC DMA transfer mode */ + + usc_reset(info); + usc_set_sdlc_mode(info); + usc_enable_loopback(info,1); + + /* Reprogram the RDMR so that the 16C32 does NOT clear the count + * field of the buffer entry after fetching buffer address. This + * way we can detect a DMA failure for a DMA read (which should be + * non-destructive to system memory) before we try and write to + * memory (where a failure could corrupt system memory). + */ + + /* Receive DMA mode Register (RDMR) + * + * <15..14> 11 DMA mode = Linked List Buffer mode + * <13> 1 RSBinA/L = store Rx status Block in List entry + * <12> 0 1 = Clear count of List Entry after fetching + * <11..10> 00 Address mode = Increment + * <9> 1 Terminate Buffer on RxBound + * <8> 0 Bus Width = 16bits + * <7..0> ? status Bits (write as 0s) + * + * 1110 0010 0000 0000 = 0xe200 + */ + + usc_OutDmaReg( info, RDMR, 0xe200 ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /* SETUP TRANSMIT AND RECEIVE DMA BUFFERS */ + + FrameSize = TESTFRAMESIZE; + + /* setup 1st transmit buffer entry: */ + /* with frame size and transmit control word */ + + info->tx_buffer_list[0].count = FrameSize; + info->tx_buffer_list[0].rcc = FrameSize; + info->tx_buffer_list[0].status = 0x4000; + + /* build a transmit frame in 1st transmit DMA buffer */ + + TmpPtr = info->tx_buffer_list[0].virt_addr; + for (i = 0; i < FrameSize; i++ ) + *TmpPtr++ = i; + + /* setup 1st receive buffer entry: */ + /* clear status, set max receive buffer size */ + + info->rx_buffer_list[0].status = 0; + info->rx_buffer_list[0].count = FrameSize + 4; + + /* zero out the 1st receive buffer */ + + memset( info->rx_buffer_list[0].virt_addr, 0, FrameSize + 4 ); + + /* Set count field of next buffer entries to prevent */ + /* 16C32 from using buffers after the 1st one. */ + + info->tx_buffer_list[1].count = 0; + info->rx_buffer_list[1].count = 0; + + + /***************************/ + /* Program 16C32 receiver. */ + /***************************/ + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* setup DMA transfers */ + usc_RTCmd( info, RTCmd_PurgeRxFifo ); + + /* program 16C32 receiver with physical address of 1st DMA buffer entry */ + phys_addr = info->rx_buffer_list[0].phys_entry; + usc_OutDmaReg( info, NRARL, (unsigned short)phys_addr ); + usc_OutDmaReg( info, NRARU, (unsigned short)(phys_addr >> 16) ); + + /* Clear the Rx DMA status bits (read RDMR) and start channel */ + usc_InDmaReg( info, RDMR ); + usc_DmaCmd( info, DmaCmd_InitRxChannel ); + + /* Enable Receiver (RMR <1..0> = 10) */ + usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /*************************************************************/ + /* WAIT FOR RECEIVER TO DMA ALL PARAMETERS FROM BUFFER ENTRY */ + /*************************************************************/ + + /* Wait 100ms for interrupt. */ + EndTime = jiffies + msecs_to_jiffies(100); + + for(;;) { + if (time_after(jiffies, EndTime)) { + rc = FALSE; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + status = usc_InDmaReg( info, RDMR ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + if ( !(status & BIT4) && (status & BIT5) ) { + /* INITG (BIT 4) is inactive (no entry read in progress) AND */ + /* BUSY (BIT 5) is active (channel still active). */ + /* This means the buffer entry read has completed. */ + break; + } + } + + + /******************************/ + /* Program 16C32 transmitter. */ + /******************************/ + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* Program the Transmit Character Length Register (TCLR) */ + /* and clear FIFO (TCC is loaded with TCLR on FIFO clear) */ + + usc_OutReg( info, TCLR, (unsigned short)info->tx_buffer_list[0].count ); + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + + /* Program the address of the 1st DMA Buffer Entry in linked list */ + + phys_addr = info->tx_buffer_list[0].phys_entry; + usc_OutDmaReg( info, NTARL, (unsigned short)phys_addr ); + usc_OutDmaReg( info, NTARU, (unsigned short)(phys_addr >> 16) ); + + /* unlatch Tx status bits, and start transmit channel. */ + + usc_OutReg( info, TCSR, (unsigned short)(( usc_InReg(info, TCSR) & 0x0f00) | 0xfa) ); + usc_DmaCmd( info, DmaCmd_InitTxChannel ); + + /* wait for DMA controller to fill transmit FIFO */ + + usc_TCmd( info, TCmd_SelectTicrTxFifostatus ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /**********************************/ + /* WAIT FOR TRANSMIT FIFO TO FILL */ + /**********************************/ + + /* Wait 100ms */ + EndTime = jiffies + msecs_to_jiffies(100); + + for(;;) { + if (time_after(jiffies, EndTime)) { + rc = FALSE; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + FifoLevel = usc_InReg(info, TICR) >> 8; + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + if ( FifoLevel < 16 ) + break; + else + if ( FrameSize < 32 ) { + /* This frame is smaller than the entire transmit FIFO */ + /* so wait for the entire frame to be loaded. */ + if ( FifoLevel <= (32 - FrameSize) ) + break; + } + } + + + if ( rc == TRUE ) + { + /* Enable 16C32 transmitter. */ + + spin_lock_irqsave(&info->irq_spinlock,flags); + + /* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */ + usc_TCmd( info, TCmd_SendFrame ); + usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + + /******************************/ + /* WAIT FOR TRANSMIT COMPLETE */ + /******************************/ + + /* Wait 100ms */ + EndTime = jiffies + msecs_to_jiffies(100); + + /* While timer not expired wait for transmit complete */ + + spin_lock_irqsave(&info->irq_spinlock,flags); + status = usc_InReg( info, TCSR ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + while ( !(status & (BIT6+BIT5+BIT4+BIT2+BIT1)) ) { + if (time_after(jiffies, EndTime)) { + rc = FALSE; + break; + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + status = usc_InReg( info, TCSR ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + } + } + + + if ( rc == TRUE ){ + /* CHECK FOR TRANSMIT ERRORS */ + if ( status & (BIT5 + BIT1) ) + rc = FALSE; + } + + if ( rc == TRUE ) { + /* WAIT FOR RECEIVE COMPLETE */ + + /* Wait 100ms */ + EndTime = jiffies + msecs_to_jiffies(100); + + /* Wait for 16C32 to write receive status to buffer entry. */ + status=info->rx_buffer_list[0].status; + while ( status == 0 ) { + if (time_after(jiffies, EndTime)) { + rc = FALSE; + break; + } + status=info->rx_buffer_list[0].status; + } + } + + + if ( rc == TRUE ) { + /* CHECK FOR RECEIVE ERRORS */ + status = info->rx_buffer_list[0].status; + + if ( status & (BIT8 + BIT3 + BIT1) ) { + /* receive error has occurred */ + rc = FALSE; + } else { + if ( memcmp( info->tx_buffer_list[0].virt_addr , + info->rx_buffer_list[0].virt_addr, FrameSize ) ){ + rc = FALSE; + } + } + } + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_reset( info ); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + /* restore current port options */ + memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS)); + + return rc; + +} /* end of mgsl_dma_test() */ + +/* mgsl_adapter_test() + * + * Perform the register, IRQ, and DMA tests for the 16C32. + * + * Arguments: info pointer to device instance data + * Return Value: 0 if success, otherwise -ENODEV + */ +static int mgsl_adapter_test( struct mgsl_struct *info ) +{ + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):Testing device %s\n", + __FILE__,__LINE__,info->device_name ); + + if ( !mgsl_register_test( info ) ) { + info->init_error = DiagStatus_AddressFailure; + printk( "%s(%d):Register test failure for device %s Addr=%04X\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->io_base) ); + return -ENODEV; + } + + if ( !mgsl_irq_test( info ) ) { + info->init_error = DiagStatus_IrqFailure; + printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) ); + return -ENODEV; + } + + if ( !mgsl_dma_test( info ) ) { + info->init_error = DiagStatus_DmaFailure; + printk( "%s(%d):DMA test failure for device %s DMA=%d\n", + __FILE__,__LINE__,info->device_name, (unsigned short)(info->dma_level) ); + return -ENODEV; + } + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):device %s passed diagnostics\n", + __FILE__,__LINE__,info->device_name ); + + return 0; + +} /* end of mgsl_adapter_test() */ + +/* mgsl_memory_test() + * + * Test the shared memory on a PCI adapter. + * + * Arguments: info pointer to device instance data + * Return Value: TRUE if test passed, otherwise FALSE + */ +static BOOLEAN mgsl_memory_test( struct mgsl_struct *info ) +{ + static unsigned long BitPatterns[] = { 0x0, 0x55555555, 0xaaaaaaaa, + 0x66666666, 0x99999999, 0xffffffff, 0x12345678 }; + unsigned long Patterncount = sizeof(BitPatterns)/sizeof(unsigned long); + unsigned long i; + unsigned long TestLimit = SHARED_MEM_ADDRESS_SIZE/sizeof(unsigned long); + unsigned long * TestAddr; + + if ( info->bus_type != MGSL_BUS_TYPE_PCI ) + return TRUE; + + TestAddr = (unsigned long *)info->memory_base; + + /* Test data lines with test pattern at one location. */ + + for ( i = 0 ; i < Patterncount ; i++ ) { + *TestAddr = BitPatterns[i]; + if ( *TestAddr != BitPatterns[i] ) + return FALSE; + } + + /* Test address lines with incrementing pattern over */ + /* entire address range. */ + + for ( i = 0 ; i < TestLimit ; i++ ) { + *TestAddr = i * 4; + TestAddr++; + } + + TestAddr = (unsigned long *)info->memory_base; + + for ( i = 0 ; i < TestLimit ; i++ ) { + if ( *TestAddr != i * 4 ) + return FALSE; + TestAddr++; + } + + memset( info->memory_base, 0, SHARED_MEM_ADDRESS_SIZE ); + + return TRUE; + +} /* End Of mgsl_memory_test() */ + + +/* mgsl_load_pci_memory() + * + * Load a large block of data into the PCI shared memory. + * Use this instead of memcpy() or memmove() to move data + * into the PCI shared memory. + * + * Notes: + * + * This function prevents the PCI9050 interface chip from hogging + * the adapter local bus, which can starve the 16C32 by preventing + * 16C32 bus master cycles. + * + * The PCI9050 documentation says that the 9050 will always release + * control of the local bus after completing the current read + * or write operation. + * + * It appears that as long as the PCI9050 write FIFO is full, the + * PCI9050 treats all of the writes as a single burst transaction + * and will not release the bus. This causes DMA latency problems + * at high speeds when copying large data blocks to the shared + * memory. + * + * This function in effect, breaks the a large shared memory write + * into multiple transations by interleaving a shared memory read + * which will flush the write FIFO and 'complete' the write + * transation. This allows any pending DMA request to gain control + * of the local bus in a timely fasion. + * + * Arguments: + * + * TargetPtr pointer to target address in PCI shared memory + * SourcePtr pointer to source buffer for data + * count count in bytes of data to copy + * + * Return Value: None + */ +static void mgsl_load_pci_memory( char* TargetPtr, const char* SourcePtr, + unsigned short count ) +{ + /* 16 32-bit writes @ 60ns each = 960ns max latency on local bus */ +#define PCI_LOAD_INTERVAL 64 + + unsigned short Intervalcount = count / PCI_LOAD_INTERVAL; + unsigned short Index; + unsigned long Dummy; + + for ( Index = 0 ; Index < Intervalcount ; Index++ ) + { + memcpy(TargetPtr, SourcePtr, PCI_LOAD_INTERVAL); + Dummy = *((volatile unsigned long *)TargetPtr); + TargetPtr += PCI_LOAD_INTERVAL; + SourcePtr += PCI_LOAD_INTERVAL; + } + + memcpy( TargetPtr, SourcePtr, count % PCI_LOAD_INTERVAL ); + +} /* End Of mgsl_load_pci_memory() */ + +static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int count, int xmit) +{ + int i; + int linecount; + if (xmit) + printk("%s tx data:\n",info->device_name); + else + printk("%s rx data:\n",info->device_name); + + while(count) { + if (count > 16) + linecount = 16; + else + linecount = count; + + for(i=0;i<linecount;i++) + printk("%02X ",(unsigned char)data[i]); + for(;i<17;i++) + printk(" "); + for(i=0;i<linecount;i++) { + if (data[i]>=040 && data[i]<=0176) + printk("%c",data[i]); + else + printk("."); + } + printk("\n"); + + data += linecount; + count -= linecount; + } +} /* end of mgsl_trace_block() */ + +/* mgsl_tx_timeout() + * + * called when HDLC frame times out + * update stats and do tx completion processing + * + * Arguments: context pointer to device instance data + * Return Value: None + */ +static void mgsl_tx_timeout(unsigned long context) +{ + struct mgsl_struct *info = (struct mgsl_struct*)context; + unsigned long flags; + + if ( debug_level >= DEBUG_LEVEL_INFO ) + printk( "%s(%d):mgsl_tx_timeout(%s)\n", + __FILE__,__LINE__,info->device_name); + if(info->tx_active && + (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW) ) { + info->icount.txtimeout++; + } + spin_lock_irqsave(&info->irq_spinlock,flags); + info->tx_active = 0; + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + if ( info->params.flags & HDLC_FLAG_HDLC_LOOPMODE ) + usc_loopmode_cancel_transmit( info ); + + spin_unlock_irqrestore(&info->irq_spinlock,flags); + +#ifdef CONFIG_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + mgsl_bh_transmit(info); + +} /* end of mgsl_tx_timeout() */ + +/* signal that there are no more frames to send, so that + * line is 'released' by echoing RxD to TxD when current + * transmission is complete (or immediately if no tx in progress). + */ +static int mgsl_loopmode_send_done( struct mgsl_struct * info ) +{ + unsigned long flags; + + spin_lock_irqsave(&info->irq_spinlock,flags); + if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) { + if (info->tx_active) + info->loopmode_send_done_requested = TRUE; + else + usc_loopmode_send_done(info); + } + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return 0; +} + +/* release the line by echoing RxD to TxD + * upon completion of a transmit frame + */ +static void usc_loopmode_send_done( struct mgsl_struct * info ) +{ + info->loopmode_send_done_requested = FALSE; + /* clear CMR:13 to 0 to start echoing RxData to TxData */ + info->cmr_value &= ~BIT13; + usc_OutReg(info, CMR, info->cmr_value); +} + +/* abort a transmit in progress while in HDLC LoopMode + */ +static void usc_loopmode_cancel_transmit( struct mgsl_struct * info ) +{ + /* reset tx dma channel and purge TxFifo */ + usc_RTCmd( info, RTCmd_PurgeTxFifo ); + usc_DmaCmd( info, DmaCmd_ResetTxChannel ); + usc_loopmode_send_done( info ); +} + +/* for HDLC/SDLC LoopMode, setting CMR:13 after the transmitter is enabled + * is an Insert Into Loop action. Upon receipt of a GoAhead sequence (RxAbort) + * we must clear CMR:13 to begin repeating TxData to RxData + */ +static void usc_loopmode_insert_request( struct mgsl_struct * info ) +{ + info->loopmode_insert_requested = TRUE; + + /* enable RxAbort irq. On next RxAbort, clear CMR:13 to + * begin repeating TxData on RxData (complete insertion) + */ + usc_OutReg( info, RICR, + (usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) ); + + /* set CMR:13 to insert into loop on next GoAhead (RxAbort) */ + info->cmr_value |= BIT13; + usc_OutReg(info, CMR, info->cmr_value); +} + +/* return 1 if station is inserted into the loop, otherwise 0 + */ +static int usc_loopmode_active( struct mgsl_struct * info) +{ + return usc_InReg( info, CCSR ) & BIT7 ? 1 : 0 ; +} + +#ifdef CONFIG_HDLC + +/** + * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) + * set encoding and frame check sequence (FCS) options + * + * dev pointer to network device structure + * encoding serial encoding setting + * parity FCS setting + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned char new_encoding; + unsigned short new_crctype; + + /* return error if TTY interface open */ + if (info->count) + return -EBUSY; + + switch (encoding) + { + case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; + case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; + case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; + case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; + case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; + default: return -EINVAL; + } + + switch (parity) + { + case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; + case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; + case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; + default: return -EINVAL; + } + + info->params.encoding = new_encoding; + info->params.crc_type = new_crctype;; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + mgsl_program_hw(info); + + return 0; +} + +/** + * called by generic HDLC layer to send frame + * + * skb socket buffer containing HDLC frame + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + struct net_device_stats *stats = hdlc_stats(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name); + + /* stop sending until this frame completes */ + netif_stop_queue(dev); + + /* copy data to device buffers */ + info->xmit_cnt = skb->len; + mgsl_load_tx_dma_buffer(info, skb->data, skb->len); + + /* update network statistics */ + stats->tx_packets++; + stats->tx_bytes += skb->len; + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); + + /* save start time for transmit timeout detection */ + dev->trans_start = jiffies; + + /* start hardware transmitter if necessary */ + spin_lock_irqsave(&info->irq_spinlock,flags); + if (!info->tx_active) + usc_start_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + return 0; +} + +/** + * called by network layer when interface enabled + * claim resources and initialize hardware + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_open(struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + int rc; + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); + + /* generic HDLC layer open processing */ + if ((rc = hdlc_open(dev))) + return rc; + + /* arbitrate between network and tty opens */ + spin_lock_irqsave(&info->netlock, flags); + if (info->count != 0 || info->netcount != 0) { + printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name); + spin_unlock_irqrestore(&info->netlock, flags); + return -EBUSY; + } + info->netcount=1; + spin_unlock_irqrestore(&info->netlock, flags); + + /* claim resources and init adapter */ + if ((rc = startup(info)) != 0) { + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + return rc; + } + + /* assert DTR and RTS, apply hardware settings */ + info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR; + mgsl_program_hw(info); + + /* enable network layer transmit */ + dev->trans_start = jiffies; + netif_start_queue(dev); + + /* inform generic HDLC layer of current DCD status */ + spin_lock_irqsave(&info->irq_spinlock, flags); + usc_get_serial_signals(info); + spin_unlock_irqrestore(&info->irq_spinlock, flags); + hdlc_set_carrier(info->serial_signals & SerialSignal_DCD, dev); + + return 0; +} + +/** + * called by network layer when interface is disabled + * shutdown hardware and release resources + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_close(struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name); + + netif_stop_queue(dev); + + /* shutdown adapter and release resources */ + shutdown(info); + + hdlc_close(dev); + + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + + return 0; +} + +/** + * called by network layer to process IOCTL call to network device + * + * dev pointer to network device structure + * ifr pointer to network interface request structure + * cmd IOCTL command code + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings new_line; + sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; + struct mgsl_struct *info = dev_to_port(dev); + unsigned int flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name); + + /* return error if TTY interface open */ + if (info->count) + return -EBUSY; + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + switch(ifr->ifr_settings.type) { + case IF_GET_IFACE: /* return current sync_serial_settings */ + + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + + flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + + switch (flags){ + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; + case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; + default: new_line.clock_type = CLOCK_DEFAULT; + } + + new_line.clock_rate = info->params.clock_speed; + new_line.loopback = info->params.loopback ? 1:0; + + if (copy_to_user(line, &new_line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ + + if(!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&new_line, line, size)) + return -EFAULT; + + switch (new_line.clock_type) + { + case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; + case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; + case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; + case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; + case CLOCK_DEFAULT: flags = info->params.flags & + (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; + default: return -EINVAL; + } + + if (new_line.loopback != 0 && new_line.loopback != 1) + return -EINVAL; + + info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + info->params.flags |= flags; + + info->params.loopback = new_line.loopback; + + if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) + info->params.clock_speed = new_line.clock_rate; + else + info->params.clock_speed = 0; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + mgsl_program_hw(info); + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +/** + * called by network layer when transmit timeout is detected + * + * dev pointer to network device structure + */ +static void hdlcdev_tx_timeout(struct net_device *dev) +{ + struct mgsl_struct *info = dev_to_port(dev); + struct net_device_stats *stats = hdlc_stats(dev); + unsigned long flags; + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_tx_timeout(%s)\n",dev->name); + + stats->tx_errors++; + stats->tx_aborted_errors++; + + spin_lock_irqsave(&info->irq_spinlock,flags); + usc_stop_transmitter(info); + spin_unlock_irqrestore(&info->irq_spinlock,flags); + + netif_wake_queue(dev); +} + +/** + * called by device driver when transmit completes + * reenable network layer transmit if stopped + * + * info pointer to device instance information + */ +static void hdlcdev_tx_done(struct mgsl_struct *info) +{ + if (netif_queue_stopped(info->netdev)) + netif_wake_queue(info->netdev); +} + +/** + * called by device driver when frame received + * pass frame to network layer + * + * info pointer to device instance information + * buf pointer to buffer contianing frame data + * size count of data bytes in buf + */ +static void hdlcdev_rx(struct mgsl_struct *info, char *buf, int size) +{ + struct sk_buff *skb = dev_alloc_skb(size); + struct net_device *dev = info->netdev; + struct net_device_stats *stats = hdlc_stats(dev); + + if (debug_level >= DEBUG_LEVEL_INFO) + printk("hdlcdev_rx(%s)\n",dev->name); + + if (skb == NULL) { + printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name); + stats->rx_dropped++; + return; + } + + memcpy(skb_put(skb, size),buf,size); + + skb->protocol = hdlc_type_trans(skb, info->netdev); + + stats->rx_packets++; + stats->rx_bytes += size; + + netif_rx(skb); + + info->netdev->last_rx = jiffies; +} + +/** + * called by device driver when adding device instance + * do generic HDLC initialization + * + * info pointer to device instance information + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_init(struct mgsl_struct *info) +{ + int rc; + struct net_device *dev; + hdlc_device *hdlc; + + /* allocate and initialize network and HDLC layer objects */ + + if (!(dev = alloc_hdlcdev(info))) { + printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); + return -ENOMEM; + } + + /* for network layer reporting purposes only */ + dev->base_addr = info->io_base; + dev->irq = info->irq_level; + dev->dma = info->dma_level; + + /* network layer callbacks and settings */ + dev->do_ioctl = hdlcdev_ioctl; + dev->open = hdlcdev_open; + dev->stop = hdlcdev_close; + dev->tx_timeout = hdlcdev_tx_timeout; + dev->watchdog_timeo = 10*HZ; + dev->tx_queue_len = 50; + + /* generic HDLC layer callbacks and settings */ + hdlc = dev_to_hdlc(dev); + hdlc->attach = hdlcdev_attach; + hdlc->xmit = hdlcdev_xmit; + + /* register objects with HDLC layer */ + if ((rc = register_hdlc_device(dev))) { + printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + free_netdev(dev); + return rc; + } + + info->netdev = dev; + return 0; +} + +/** + * called by device driver when removing device instance + * do generic HDLC cleanup + * + * info pointer to device instance information + */ +static void hdlcdev_exit(struct mgsl_struct *info) +{ + unregister_hdlc_device(info->netdev); + free_netdev(info->netdev); + info->netdev = NULL; +} + +#endif /* CONFIG_HDLC */ + + +static int __devinit synclink_init_one (struct pci_dev *dev, + const struct pci_device_id *ent) +{ + struct mgsl_struct *info; + + if (pci_enable_device(dev)) { + printk("error enabling pci device %p\n", dev); + return -EIO; + } + + if (!(info = mgsl_allocate_device())) { + printk("can't allocate device instance data.\n"); + return -EIO; + } + + /* Copy user configuration info to device instance data */ + + info->io_base = pci_resource_start(dev, 2); + info->irq_level = dev->irq; + info->phys_memory_base = pci_resource_start(dev, 3); + + /* Because veremap only works on page boundaries we must map + * a larger area than is actually implemented for the LCR + * memory range. We map a full page starting at the page boundary. + */ + info->phys_lcr_base = pci_resource_start(dev, 0); + info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1); + info->phys_lcr_base &= ~(PAGE_SIZE-1); + + info->bus_type = MGSL_BUS_TYPE_PCI; + info->io_addr_size = 8; + info->irq_flags = SA_SHIRQ; + + if (dev->device == 0x0210) { + /* Version 1 PCI9030 based universal PCI adapter */ + info->misc_ctrl_value = 0x007c4080; + info->hw_version = 1; + } else { + /* Version 0 PCI9050 based 5V PCI adapter + * A PCI9050 bug prevents reading LCR registers if + * LCR base address bit 7 is set. Maintain shadow + * value so we can write to LCR misc control reg. + */ + info->misc_ctrl_value = 0x087e4546; + info->hw_version = 0; + } + + mgsl_add_device(info); + + return 0; +} + +static void __devexit synclink_remove_one (struct pci_dev *dev) +{ +} + |