diff options
Diffstat (limited to 'drivers/char/tpm/tpm_infineon.c')
-rw-r--r-- | drivers/char/tpm/tpm_infineon.c | 157 |
1 files changed, 59 insertions, 98 deletions
diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index 5c3aeaffaf8..d356f53c49b 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -5,6 +5,7 @@ * Specifications at www.trustedcomputinggroup.org * * Copyright (C) 2005, Marcel Selhorst <selhorst@crypto.rub.de> + * Sirrix AG - security technologies, http://www.sirrix.com and * Applied Data Security Group, Ruhr-University Bochum, Germany * Project-Homepage: http://www.prosec.rub.de/tpm * @@ -31,7 +32,8 @@ /* These values will be filled after PnP-call */ static int TPM_INF_DATA = 0; static int TPM_INF_ADDR = 0; -static int pnp_registered = 0; +static int TPM_INF_BASE = 0; +static int TPM_INF_PORT_LEN = 0; /* TPM header definitions */ enum infineon_tpm_header { @@ -143,11 +145,9 @@ static int wait(struct tpm_chip *chip, int wait_for_bit) } if (i == TPM_MAX_TRIES) { /* timeout occurs */ if (wait_for_bit == STAT_XFE) - dev_err(chip->dev, - "Timeout in wait(STAT_XFE)\n"); + dev_err(chip->dev, "Timeout in wait(STAT_XFE)\n"); if (wait_for_bit == STAT_RDA) - dev_err(chip->dev, - "Timeout in wait(STAT_RDA)\n"); + dev_err(chip->dev, "Timeout in wait(STAT_RDA)\n"); return -EIO; } return 0; @@ -221,8 +221,7 @@ recv_begin: } if ((size == 0x6D00) && (buf[1] == 0x80)) { - dev_err(chip->dev, - "Error handling on vendor layer!\n"); + dev_err(chip->dev, "Error handling on vendor layer!\n"); return -EIO; } @@ -318,7 +317,7 @@ static void tpm_inf_cancel(struct tpm_chip *chip) static u8 tpm_inf_status(struct tpm_chip *chip) { - return inb(chip->vendor->base + 1); + return inb(chip->vendor->base + STAT); } static DEVICE_ATTR(pubek, S_IRUGO, tpm_show_pubek, NULL); @@ -362,30 +361,11 @@ static const struct pnp_device_id tpm_pnp_tbl[] = { {"IFX0102", 0}, {"", 0} }; + MODULE_DEVICE_TABLE(pnp, tpm_pnp_tbl); static int __devinit tpm_inf_pnp_probe(struct pnp_dev *dev, - const struct pnp_device_id *dev_id) -{ - if (pnp_port_valid(dev, 0)) { - TPM_INF_ADDR = (pnp_port_start(dev, 0) & 0xff); - TPM_INF_DATA = ((TPM_INF_ADDR + 1) & 0xff); - tpm_inf.base = pnp_port_start(dev, 1); - dev_info(&dev->dev, "Found %s with ID %s\n", - dev->name, dev_id->id); - return 0; - } - return -ENODEV; -} - -static struct pnp_driver tpm_inf_pnp = { - .name = "tpm_inf_pnp", - .id_table = tpm_pnp_tbl, - .probe = tpm_inf_pnp_probe, -}; - -static int __devinit tpm_inf_probe(struct pci_dev *pci_dev, - const struct pci_device_id *pci_id) + const struct pnp_device_id *dev_id) { int rc = 0; u8 iol, ioh; @@ -394,30 +374,28 @@ static int __devinit tpm_inf_probe(struct pci_dev *pci_dev, int productid[2]; char chipname[20]; - rc = pci_enable_device(pci_dev); - if (rc) - return rc; - - dev_info(&pci_dev->dev, "LPC-bus found at 0x%x\n", pci_id->device); - - /* read IO-ports from PnP */ - rc = pnp_register_driver(&tpm_inf_pnp); - if (rc < 0) { - dev_err(&pci_dev->dev, - "Error %x from pnp_register_driver!\n",rc); - goto error2; - } - if (!rc) { - dev_info(&pci_dev->dev, "No Infineon TPM found!\n"); - goto error; + /* read IO-ports through PnP */ + if (pnp_port_valid(dev, 0) && pnp_port_valid(dev, 1) && + !(pnp_port_flags(dev, 0) & IORESOURCE_DISABLED)) { + TPM_INF_ADDR = pnp_port_start(dev, 0); + TPM_INF_DATA = (TPM_INF_ADDR + 1); + TPM_INF_BASE = pnp_port_start(dev, 1); + TPM_INF_PORT_LEN = pnp_port_len(dev, 1); + if (!TPM_INF_PORT_LEN) + return -EINVAL; + dev_info(&dev->dev, "Found %s with ID %s\n", + dev->name, dev_id->id); + if (!((TPM_INF_BASE >> 8) & 0xff)) + return -EINVAL; + /* publish my base address and request region */ + tpm_inf.base = TPM_INF_BASE; + if (request_region + (tpm_inf.base, TPM_INF_PORT_LEN, "tpm_infineon0") == NULL) { + release_region(tpm_inf.base, TPM_INF_PORT_LEN); + return -EINVAL; + } } else { - pnp_registered = 1; - } - - /* Make sure, we have received valid config ports */ - if (!TPM_INF_ADDR) { - dev_err(&pci_dev->dev, "No valid IO-ports received!\n"); - goto error; + return -EINVAL; } /* query chip for its vendor, its version number a.s.o. */ @@ -449,10 +427,6 @@ static int __devinit tpm_inf_probe(struct pci_dev *pci_dev, if ((vendorid[0] << 8 | vendorid[1]) == (TPM_INFINEON_DEV_VEN_VALUE)) { - if (tpm_inf.base == 0) { - dev_err(&pci_dev->dev, "No IO-ports found!\n"); - goto error; - } /* configure TPM with IO-ports */ outb(IOLIMH, TPM_INF_ADDR); outb(((tpm_inf.base >> 8) & 0xff), TPM_INF_DATA); @@ -466,10 +440,11 @@ static int __devinit tpm_inf_probe(struct pci_dev *pci_dev, iol = inb(TPM_INF_DATA); if ((ioh << 8 | iol) != tpm_inf.base) { - dev_err(&pci_dev->dev, + dev_err(&dev->dev, "Could not set IO-ports to %04x\n", tpm_inf.base); - goto error; + release_region(tpm_inf.base, TPM_INF_PORT_LEN); + return -EIO; } /* activate register */ @@ -481,7 +456,7 @@ static int __devinit tpm_inf_probe(struct pci_dev *pci_dev, outb(RESET_LP_IRQC_DISABLE, tpm_inf.base + CMD); /* Finally, we're done, print some infos */ - dev_info(&pci_dev->dev, "TPM found: " + dev_info(&dev->dev, "TPM found: " "config base 0x%x, " "io base 0x%x, " "chip version %02x%02x, " @@ -489,67 +464,53 @@ static int __devinit tpm_inf_probe(struct pci_dev *pci_dev, "product id %02x%02x" "%s\n", TPM_INF_ADDR, - tpm_inf.base, + TPM_INF_BASE, version[0], version[1], vendorid[0], vendorid[1], productid[0], productid[1], chipname); - rc = tpm_register_hardware(&pci_dev->dev, &tpm_inf); - if (rc < 0) - goto error; + rc = tpm_register_hardware(&dev->dev, &tpm_inf); + if (rc < 0) { + release_region(tpm_inf.base, TPM_INF_PORT_LEN); + return -ENODEV; + } return 0; } else { - dev_info(&pci_dev->dev, "No Infineon TPM found!\n"); -error: - pnp_unregister_driver(&tpm_inf_pnp); -error2: - pci_disable_device(pci_dev); - pnp_registered = 0; + dev_info(&dev->dev, "No Infineon TPM found!\n"); return -ENODEV; } } -static __devexit void tpm_inf_remove(struct pci_dev* pci_dev) +static __devexit void tpm_inf_pnp_remove(struct pnp_dev *dev) { - struct tpm_chip* chip = pci_get_drvdata(pci_dev); + struct tpm_chip *chip = pnp_get_drvdata(dev); - if( chip ) + if (chip) { + release_region(chip->vendor->base, TPM_INF_PORT_LEN); tpm_remove_hardware(chip->dev); + } } -static struct pci_device_id tpm_pci_tbl[] __devinitdata = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)}, - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_2)}, - {0,} -}; - -MODULE_DEVICE_TABLE(pci, tpm_pci_tbl); - -static struct pci_driver inf_pci_driver = { - .name = "tpm_inf", - .id_table = tpm_pci_tbl, - .probe = tpm_inf_probe, - .remove = __devexit_p(tpm_inf_remove), - .suspend = tpm_pm_suspend, - .resume = tpm_pm_resume, +static struct pnp_driver tpm_inf_pnp = { + .name = "tpm_inf_pnp", + .driver = { + .owner = THIS_MODULE, + .suspend = tpm_pm_suspend, + .resume = tpm_pm_resume, + }, + .id_table = tpm_pnp_tbl, + .probe = tpm_inf_pnp_probe, + .remove = tpm_inf_pnp_remove, }; static int __init init_inf(void) { - return pci_register_driver(&inf_pci_driver); + return pnp_register_driver(&tpm_inf_pnp); } static void __exit cleanup_inf(void) { - if (pnp_registered) - pnp_unregister_driver(&tpm_inf_pnp); - pci_unregister_driver(&inf_pci_driver); + pnp_unregister_driver(&tpm_inf_pnp); } module_init(init_inf); @@ -557,5 +518,5 @@ module_exit(cleanup_inf); MODULE_AUTHOR("Marcel Selhorst <selhorst@crypto.rub.de>"); MODULE_DESCRIPTION("Driver for Infineon TPM SLD 9630 TT 1.1 / SLB 9635 TT 1.2"); -MODULE_VERSION("1.5"); +MODULE_VERSION("1.6"); MODULE_LICENSE("GPL"); |