diff options
Diffstat (limited to 'drivers/char/watchdog/Kconfig')
-rw-r--r-- | drivers/char/watchdog/Kconfig | 150 |
1 files changed, 66 insertions, 84 deletions
diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 60198a78974..1cad32c62ed 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -2,9 +2,7 @@ # Watchdog device configuration # -menu "Watchdog Cards" - -config WATCHDOG +menuconfig WATCHDOG bool "Watchdog Timer Support" ---help--- If you say Y here (and to one of the following options) and create a @@ -28,9 +26,10 @@ config WATCHDOG If unsure, say N. +if WATCHDOG + config WATCHDOG_NOWAYOUT bool "Disable watchdog shutdown on close" - depends on WATCHDOG help The default watchdog behaviour (which you get if you say N here) is to stop the timer if the process managing it closes the file @@ -43,13 +42,11 @@ config WATCHDOG_NOWAYOUT # comment "Watchdog Device Drivers" - depends on WATCHDOG # Architecture Independent config SOFT_WATCHDOG tristate "Software watchdog" - depends on WATCHDOG help A software monitoring watchdog. This will fail to reboot your system from some situations that the hardware watchdog will recover @@ -62,14 +59,14 @@ config SOFT_WATCHDOG config AT91RM9200_WATCHDOG tristate "AT91RM9200 watchdog" - depends on WATCHDOG && ARCH_AT91RM9200 + depends on ARCH_AT91RM9200 help Watchdog timer embedded into AT91RM9200 chips. This will reboot your system when the timeout is reached. config 21285_WATCHDOG tristate "DC21285 watchdog" - depends on WATCHDOG && FOOTBRIDGE + depends on FOOTBRIDGE help The Intel Footbridge chip contains a built-in watchdog circuit. Say Y here if you wish to use this. Alternatively say M to compile the @@ -83,7 +80,7 @@ config 21285_WATCHDOG config 977_WATCHDOG tristate "NetWinder WB83C977 watchdog" - depends on WATCHDOG && FOOTBRIDGE && ARCH_NETWINDER + depends on FOOTBRIDGE && ARCH_NETWINDER help Say Y here to include support for the WB977 watchdog included in NetWinder machines. Alternatively say M to compile the driver as @@ -93,7 +90,7 @@ config 977_WATCHDOG config IXP2000_WATCHDOG tristate "IXP2000 Watchdog" - depends on WATCHDOG && ARCH_IXP2000 + depends on ARCH_IXP2000 help Say Y here if to include support for the watchdog timer in the Intel IXP2000(2400, 2800, 2850) network processors. @@ -104,7 +101,7 @@ config IXP2000_WATCHDOG config IXP4XX_WATCHDOG tristate "IXP4xx Watchdog" - depends on WATCHDOG && ARCH_IXP4XX + depends on ARCH_IXP4XX help Say Y here if to include support for the watchdog timer in the Intel IXP4xx network processors. This driver can @@ -120,7 +117,7 @@ config IXP4XX_WATCHDOG config S3C2410_WATCHDOG tristate "S3C2410 Watchdog" - depends on WATCHDOG && ARCH_S3C2410 + depends on ARCH_S3C2410 help Watchdog timer block in the Samsung S3C2410 chips. This will reboot the system when the timer expires with the watchdog @@ -136,7 +133,7 @@ config S3C2410_WATCHDOG config SA1100_WATCHDOG tristate "SA1100/PXA2xx watchdog" - depends on WATCHDOG && ( ARCH_SA1100 || ARCH_PXA ) + depends on ARCH_SA1100 || ARCH_PXA help Watchdog timer embedded into SA11x0 and PXA2xx chips. This will reboot your system when timeout is reached. @@ -148,7 +145,7 @@ config SA1100_WATCHDOG config MPCORE_WATCHDOG tristate "MPcore watchdog" - depends on WATCHDOG && ARM_MPCORE_PLATFORM && LOCAL_TIMERS + depends on ARM_MPCORE_PLATFORM && LOCAL_TIMERS help Watchdog timer embedded into the MPcore system. @@ -157,7 +154,7 @@ config MPCORE_WATCHDOG config EP93XX_WATCHDOG tristate "EP93xx Watchdog" - depends on WATCHDOG && ARCH_EP93XX + depends on ARCH_EP93XX help Say Y here if to include support for the watchdog timer embedded in the Cirrus Logic EP93xx family of devices. @@ -167,14 +164,14 @@ config EP93XX_WATCHDOG config OMAP_WATCHDOG tristate "OMAP Watchdog" - depends on WATCHDOG && (ARCH_OMAP16XX || ARCH_OMAP24XX) + depends on ARCH_OMAP16XX || ARCH_OMAP24XX help Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to enable the OMAP1610/OMAP1710 watchdog timer. config PNX4008_WATCHDOG tristate "PNX4008 Watchdog" - depends on WATCHDOG && ARCH_PNX4008 + depends on ARCH_PNX4008 help Say Y here if to include support for the watchdog timer in the PNX4008 processor. @@ -187,7 +184,7 @@ config PNX4008_WATCHDOG config ACQUIRE_WDT tristate "Acquire SBC Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the hardware watchdog on Single Board Computers produced by Acquire Inc (and others). This watchdog @@ -201,7 +198,7 @@ config ACQUIRE_WDT config ADVANTECH_WDT tristate "Advantech SBC Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 help If you are configuring a Linux kernel for the Advantech single-board computer, say `Y' here to support its built-in watchdog timer @@ -210,7 +207,7 @@ config ADVANTECH_WDT config ALIM1535_WDT tristate "ALi M1535 PMU Watchdog Timer" - depends on WATCHDOG && X86 && PCI + depends on X86 && PCI ---help--- This is the driver for the hardware watchdog on the ALi M1535 PMU. @@ -221,7 +218,7 @@ config ALIM1535_WDT config ALIM7101_WDT tristate "ALi M7101 PMU Computer Watchdog" - depends on WATCHDOG && X86 && PCI + depends on X86 && PCI help This is the driver for the hardware watchdog on the ALi M7101 PMU as used in the x86 Cobalt servers. @@ -233,7 +230,7 @@ config ALIM7101_WDT config SC520_WDT tristate "AMD Elan SC520 processor Watchdog" - depends on WATCHDOG && X86 + depends on X86 help This is the driver for the hardware watchdog built in to the AMD "Elan" SC520 microcomputer commonly used in embedded systems. @@ -246,7 +243,7 @@ config SC520_WDT config EUROTECH_WDT tristate "Eurotech CPU-1220/1410 Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 help Enable support for the watchdog timer on the Eurotech CPU-1220 and CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product @@ -254,7 +251,7 @@ config EUROTECH_WDT config IB700_WDT tristate "IB700 SBC Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the hardware watchdog on the IB700 Single Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog @@ -270,7 +267,7 @@ config IB700_WDT config IBMASR tristate "IBM Automatic Server Restart" - depends on WATCHDOG && X86 + depends on X86 help This is the driver for the IBM Automatic Server Restart watchdog timer built-in into some eServer xSeries machines. @@ -280,7 +277,7 @@ config IBMASR config WAFER_WDT tristate "ICP Wafer 5823 Single Board Computer Watchdog" - depends on WATCHDOG && X86 + depends on X86 help This is a driver for the hardware watchdog on the ICP Wafer 5823 Single Board Computer (and probably other similar models). @@ -290,7 +287,7 @@ config WAFER_WDT config I6300ESB_WDT tristate "Intel 6300ESB Timer/Watchdog" - depends on WATCHDOG && X86 && PCI + depends on X86 && PCI ---help--- Hardware driver for the watchdog timer built into the Intel 6300ESB controller hub. @@ -298,31 +295,9 @@ config I6300ESB_WDT To compile this driver as a module, choose M here: the module will be called i6300esb. -config I8XX_TCO - tristate "Intel i8xx TCO Timer/Watchdog" - depends on WATCHDOG && (X86 || IA64) && PCI - default n - ---help--- - Hardware driver for the TCO timer built into the Intel 82801 - I/O Controller Hub family. The TCO (Total Cost of Ownership) - timer is a watchdog timer that will reboot the machine after - its second expiration. The expiration time can be configured - with the "heartbeat" parameter. - - On some motherboards the driver may fail to reset the chipset's - NO_REBOOT flag which prevents the watchdog from rebooting the - machine. If this is the case you will get a kernel message like - "failed to reset NO_REBOOT flag, reboot disabled by hardware". - - To compile this driver as a module, choose M here: the - module will be called i8xx_tco. - - Note: This driver will be removed in the near future. Please - use the Intel TCO Timer/Watchdog driver. - config ITCO_WDT tristate "Intel TCO Timer/Watchdog" - depends on WATCHDOG && (X86 || IA64) && PCI + depends on (X86 || IA64) && PCI ---help--- Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller @@ -351,7 +326,7 @@ config ITCO_VENDOR_SUPPORT config SC1200_WDT tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" - depends on WATCHDOG && X86 + depends on X86 help This is a driver for National Semiconductor PC87307/PC97307 hardware watchdog cards as found on the SC1200. This watchdog is mainly used @@ -365,7 +340,7 @@ config SC1200_WDT config SCx200_WDT tristate "National Semiconductor SCx200 Watchdog" - depends on WATCHDOG && SCx200 && PCI + depends on SCx200 && PCI help Enable the built-in watchdog timer support on the National Semiconductor SCx200 processors. @@ -374,7 +349,7 @@ config SCx200_WDT config PC87413_WDT tristate "NS PC87413 watchdog" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the hardware watchdog on the PC87413 chipset This watchdog simply watches your kernel to make sure it doesn't @@ -388,7 +363,7 @@ config PC87413_WDT config 60XX_WDT tristate "SBC-60XX Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 help This driver can be used with the watchdog timer found on some single board computers, namely the 6010 PII based computer. @@ -402,7 +377,7 @@ config 60XX_WDT config SBC8360_WDT tristate "SBC8360 Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the hardware watchdog on the SBC8360 Single @@ -415,7 +390,7 @@ config SBC8360_WDT config CPU5_WDT tristate "SMA CPU5 Watchdog" - depends on WATCHDOG && X86 + depends on X86 ---help--- TBD. To compile this driver as a module, choose M here: the @@ -423,7 +398,7 @@ config CPU5_WDT config SMSC37B787_WDT tristate "Winbond SMsC37B787 Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the hardware watchdog component on the Winbond SMsC37B787 chipset as used on the NetRunner Mainboard @@ -443,7 +418,7 @@ config SMSC37B787_WDT config W83627HF_WDT tristate "W83627HF Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the hardware watchdog on the W83627HF chipset as used in Advantech PC-9578 and Tyan S2721-533 motherboards @@ -458,7 +433,7 @@ config W83627HF_WDT config W83697HF_WDT tristate "W83697HF/W83697HG Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the hardware watchdog on the W83697HF/HG chipset as used in Dedibox/VIA motherboards (and likely others). @@ -473,7 +448,7 @@ config W83697HF_WDT config W83877F_WDT tristate "W83877F (EMACS) Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the hardware watchdog on the W83877F chipset as used in EMACS PC-104 motherboards (and likely others). This @@ -488,7 +463,7 @@ config W83877F_WDT config W83977F_WDT tristate "W83977F (PCM-5335) Watchdog Timer" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the hardware watchdog on the W83977F I/O chip as used in AAEON's PCM-5335 SBC (and likely others). This @@ -501,7 +476,7 @@ config W83977F_WDT config MACHZ_WDT tristate "ZF MachZ Watchdog" - depends on WATCHDOG && X86 + depends on X86 ---help--- If you are using a ZF Micro MachZ processor, say Y here, otherwise N. This is the driver for the watchdog timer built-in on that @@ -514,7 +489,7 @@ config MACHZ_WDT config SBC_EPX_C3_WATCHDOG tristate "Winsystems SBC EPX-C3 watchdog" - depends on WATCHDOG && X86 + depends on X86 ---help--- This is the driver for the built-in watchdog timer on the EPX-C3 Single-board computer made by Winsystems, Inc. @@ -537,19 +512,19 @@ config SBC_EPX_C3_WATCHDOG config 8xx_WDT tristate "MPC8xx Watchdog Timer" - depends on WATCHDOG && 8xx + depends on 8xx config 83xx_WDT tristate "MPC83xx Watchdog Timer" - depends on WATCHDOG && PPC_83xx + depends on PPC_83xx config MV64X60_WDT tristate "MV64X60 (Marvell Discovery) Watchdog Timer" - depends on WATCHDOG && MV64X60 + depends on MV64X60 config BOOKE_WDT bool "PowerPC Book-E Watchdog Timer" - depends on WATCHDOG && (BOOKE || 4xx) + depends on BOOKE || 4xx ---help--- Please see Documentation/watchdog/watchdog-api.txt for more information. @@ -558,7 +533,7 @@ config BOOKE_WDT config WATCHDOG_RTAS tristate "RTAS watchdog" - depends on WATCHDOG && PPC_RTAS + depends on PPC_RTAS help This driver adds watchdog support for the RTAS watchdog. @@ -569,16 +544,23 @@ config WATCHDOG_RTAS config INDYDOG tristate "Indy/I2 Hardware Watchdog" - depends on WATCHDOG && SGI_IP22 + depends on SGI_IP22 help Hardware driver for the Indy's/I2's watchdog. This is a watchdog timer that will reboot the machine after a 60 second timer expired and no process has written to /dev/watchdog during that time. +config WDT_MTX1 + tristate "MTX-1 Hardware Watchdog" + depends on MIPS_MTX1 + help + Hardware driver for the MTX-1 boards. This is a watchdog timer that + will reboot the machine after a 100 seconds timer expired. + config WDT_RM9K_GPI tristate "RM9000/GPI hardware watchdog" - depends on WATCHDOG && CPU_RM9000 + depends on CPU_RM9000 help Watchdog implementation using the GPI hardware found on PMC-Sierra RM9xxx CPUs. @@ -590,7 +572,7 @@ config WDT_RM9K_GPI config ZVM_WATCHDOG tristate "z/VM Watchdog Timer" - depends on WATCHDOG && S390 + depends on S390 help IBM s/390 and zSeries machines running under z/VM 5.1 or later provide a virtual watchdog timer to their guest that cause a @@ -604,7 +586,7 @@ config ZVM_WATCHDOG config SH_WDT tristate "SuperH Watchdog" - depends on WATCHDOG && SUPERH + depends on SUPERH help This driver adds watchdog support for the integrated watchdog in the SuperH processors. If you have one of these processors and wish @@ -631,7 +613,7 @@ config SH_WDT_MMAP config WATCHDOG_CP1XXX tristate "CP1XXX Hardware Watchdog support" - depends on WATCHDOG && SPARC64 && PCI + depends on SPARC64 && PCI ---help--- This is the driver for the hardware watchdog timers present on Sun Microsystems CompactPCI models CP1400 and CP1500. @@ -645,7 +627,7 @@ config WATCHDOG_CP1XXX config WATCHDOG_RIO tristate "RIO Hardware Watchdog support" - depends on WATCHDOG && SPARC64 && PCI + depends on SPARC64 && PCI help Say Y here to support the hardware watchdog capability on Sun RIO machines. The watchdog timeout period is normally one minute but @@ -656,11 +638,11 @@ config WATCHDOG_RIO # comment "ISA-based Watchdog Cards" - depends on WATCHDOG && ISA + depends on ISA config PCWATCHDOG tristate "Berkshire Products ISA-PC Watchdog" - depends on WATCHDOG && ISA + depends on ISA ---help--- This is the driver for the Berkshire Products ISA-PC Watchdog card. This card simply watches your kernel to make sure it doesn't freeze, @@ -676,7 +658,7 @@ config PCWATCHDOG config MIXCOMWD tristate "Mixcom Watchdog" - depends on WATCHDOG && ISA + depends on ISA ---help--- This is a driver for the Mixcom hardware watchdog cards. This watchdog simply watches your kernel to make sure it doesn't freeze, @@ -690,7 +672,7 @@ config MIXCOMWD config WDT tristate "WDT Watchdog timer" - depends on WATCHDOG && ISA + depends on ISA ---help--- If you have a WDT500P or WDT501P watchdog board, say Y here, otherwise N. It is not possible to probe for this board, which means @@ -720,11 +702,11 @@ config WDT_501 # comment "PCI-based Watchdog Cards" - depends on WATCHDOG && PCI + depends on PCI config PCIPCWATCHDOG tristate "Berkshire Products PCI-PC Watchdog" - depends on WATCHDOG && PCI + depends on PCI ---help--- This is the driver for the Berkshire Products PCI-PC Watchdog card. This card simply watches your kernel to make sure it doesn't freeze, @@ -739,7 +721,7 @@ config PCIPCWATCHDOG config WDTPCI tristate "PCI-WDT500/501 Watchdog timer" - depends on WATCHDOG && PCI + depends on PCI ---help--- If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N. @@ -766,11 +748,11 @@ config WDT_501_PCI # comment "USB-based Watchdog Cards" - depends on WATCHDOG && USB + depends on USB config USBPCWATCHDOG tristate "Berkshire Products USB-PC Watchdog" - depends on WATCHDOG && USB + depends on USB ---help--- This is the driver for the Berkshire Products USB-PC Watchdog card. This card simply watches your kernel to make sure it doesn't freeze, @@ -783,4 +765,4 @@ config USBPCWATCHDOG Most people will say N. -endmenu +endif # WATCHDOG |