23 files changed, 171 insertions, 361 deletions

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 43643033a3a..ee946865d6c 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -66,21 +66,6 @@ config TTY_PRINTK
 
 	  If unsure, say N.
 
-config BRIQ_PANEL
-	tristate 'Total Impact briQ front panel driver'
-	depends on PPC_CHRP
-	---help---
-	  The briQ is a small footprint CHRP computer with a frontpanel VFD, a
-	  tristate led and two switches. It is the size of a CDROM drive.
-
-	  If you have such one and want anything showing on the VFD then you
-	  must answer Y here.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called briq_panel.
-
-	  It's safe to say N here.
-
 config BFIN_OTP
 	tristate "Blackfin On-Chip OTP Memory Support"
 	depends on BLACKFIN && (BF51x || BF52x || BF54x)
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 32762ba769c..0dc5d7ce486 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_UV_MMTIMER)	+= uv_mmtimer.o
 obj-$(CONFIG_VIOTAPE)		+= viotape.o
 obj-$(CONFIG_IBM_BSR)		+= bsr.o
 obj-$(CONFIG_SGI_MBCS)		+= mbcs.o
-obj-$(CONFIG_BRIQ_PANEL)	+= briq_panel.o
 obj-$(CONFIG_BFIN_OTP)		+= bfin-otp.o
 
 obj-$(CONFIG_PRINTER)		+= lp.o
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 780498d7658..444f8b6ab41 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -33,7 +33,7 @@
 #define ULI_X86_64_ENU_SCR_REG		0x54
 
 static struct resource *aperture_resource;
-static int __initdata agp_try_unsupported = 1;
+static bool __initdata agp_try_unsupported = 1;
 static int agp_bridges_found;
 
 static void amd64_tlbflush(struct agp_memory *temp)
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 4b71647782d..317c28ce832 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -194,10 +194,10 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge)
 
 err_out:
 	if (bridge->driver->needs_scratch_page) {
-		void *va = page_address(bridge->scratch_page_page);
+		struct page *page = bridge->scratch_page_page;
 
-		bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
-		bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
+		bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP);
+		bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE);
 	}
 	if (got_gatt)
 		bridge->driver->free_gatt_table(bridge);
@@ -221,10 +221,10 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge)
 
 	if (bridge->driver->agp_destroy_page &&
 	    bridge->driver->needs_scratch_page) {
-		void *va = page_address(bridge->scratch_page_page);
+		struct page *page = bridge->scratch_page_page;
 
-		bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP);
-		bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE);
+		bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP);
+		bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE);
 	}
 }
 
diff --git a/drivers/char/agp/sis-agp.c b/drivers/char/agp/sis-agp.c
index 29aacd81de7..08704ae5395 100644
--- a/drivers/char/agp/sis-agp.c
+++ b/drivers/char/agp/sis-agp.c
@@ -17,7 +17,7 @@
 #define PCI_DEVICE_ID_SI_662	0x0662
 #define PCI_DEVICE_ID_SI_671	0x0671
 
-static int __devinitdata agp_sis_force_delay = 0;
+static bool __devinitdata agp_sis_force_delay = 0;
 static int __devinitdata agp_sis_agp_spec = -1;
 
 static int sis_fetch_size(void)
diff --git a/drivers/char/briq_panel.c b/drivers/char/briq_panel.c
deleted file mode 100644
index 095ab90535c..00000000000
--- a/drivers/char/briq_panel.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * Drivers for the Total Impact PPC based computer "BRIQ"
- * by Dr. Karsten Jeppesen
- *
- */
-
-#include <linux/module.h>
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/tty.h>
-#include <linux/timer.h>
-#include <linux/kernel.h>
-#include <linux/wait.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/miscdevice.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-
-#define		BRIQ_PANEL_MINOR	156
-#define		BRIQ_PANEL_VFD_IOPORT	0x0390
-#define		BRIQ_PANEL_LED_IOPORT	0x0398
-#define		BRIQ_PANEL_VER		"1.1 (04/20/2002)"
-#define		BRIQ_PANEL_MSG0		"Loading Linux"
-
-static int		vfd_is_open;
-static unsigned char	vfd[40];
-static int		vfd_cursor;
-static unsigned char	ledpb, led;
-
-static void update_vfd(void)
-{
-	int	i;
-
-	/* cursor home */
-	outb(0x02, BRIQ_PANEL_VFD_IOPORT);
-	for (i=0; i<20; i++)
-		outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
-	/* cursor to next line */
-	outb(0xc0, BRIQ_PANEL_VFD_IOPORT);
-	for (i=20; i<40; i++)
-		outb(vfd[i], BRIQ_PANEL_VFD_IOPORT + 1);
-
-}
-
-static void set_led(char state)
-{
-	if (state == 'R')
-		led = 0x01;
-	else if (state == 'G')
-		led = 0x02;
-	else if (state == 'Y')
-		led = 0x03;
-	else if (state == 'X')
-		led = 0x00;
-	outb(led, BRIQ_PANEL_LED_IOPORT);
-}
-
-static int briq_panel_open(struct inode *ino, struct file *filep)
-{
-	tty_lock();
-	/* enforce single access, vfd_is_open is protected by BKL */
-	if (vfd_is_open) {
-		tty_unlock();
-		return -EBUSY;
-	}
-	vfd_is_open = 1;
-
-	tty_unlock();
-	return 0;
-}
-
-static int briq_panel_release(struct inode *ino, struct file *filep)
-{
-	if (!vfd_is_open)
-		return -ENODEV;
-
-	vfd_is_open = 0;
-
-	return 0;
-}
-
-static ssize_t briq_panel_read(struct file *file, char __user *buf, size_t count,
-			 loff_t *ppos)
-{
-	unsigned short c;
-	unsigned char cp;
-
-	if (!vfd_is_open)
-		return -ENODEV;
-
-	c = (inb(BRIQ_PANEL_LED_IOPORT) & 0x000c) | (ledpb & 0x0003);
-	set_led(' ');
-	/* upper button released */
-	if ((!(ledpb & 0x0004)) && (c & 0x0004)) {
-		cp = ' ';
-		ledpb = c;
-		if (copy_to_user(buf, &cp, 1))
-			return -EFAULT;
-		return 1;
-	}
-	/* lower button released */
-	else if ((!(ledpb & 0x0008)) && (c & 0x0008)) {
-		cp = '\r';
-		ledpb = c;
-		if (copy_to_user(buf, &cp, 1))
-			return -EFAULT;
-		return 1;
-	} else {
-		ledpb = c;
-		return 0;
-	}
-}
-
-static void scroll_vfd( void )
-{
-	int	i;
-
-	for (i=0; i<20; i++) {
-		vfd[i] = vfd[i+20];
-		vfd[i+20] = ' ';
-	}
-	vfd_cursor = 20;
-}
-
-static ssize_t briq_panel_write(struct file *file, const char __user *buf, size_t len,
-			  loff_t *ppos)
-{
-	size_t indx = len;
-	int i, esc = 0;
-
-	if (!vfd_is_open)
-		return -EBUSY;
-
-	for (;;) {
-		char c;
-		if (!indx)
-			break;
-		if (get_user(c, buf))
-			return -EFAULT;
-		if (esc) {
-			set_led(c);
-			esc = 0;
-		} else if (c == 27) {
-			esc = 1;
-		} else if (c == 12) {
-			/* do a form feed */
-			for (i=0; i<40; i++)
-				vfd[i] = ' ';
-			vfd_cursor = 0;
-		} else if (c == 10) {
-			if (vfd_cursor < 20)
-				vfd_cursor = 20;
-			else if (vfd_cursor < 40)
-				vfd_cursor = 40;
-			else if (vfd_cursor < 60)
-				vfd_cursor = 60;
-			if (vfd_cursor > 59)
-				scroll_vfd();
-		} else {
-			/* just a character */
-			if (vfd_cursor > 39)
-				scroll_vfd();
-			vfd[vfd_cursor++] = c;
-		}
-		indx--;
-		buf++;
-	}
-	update_vfd();
-
-	return len;
-}
-
-static const struct file_operations briq_panel_fops = {
-	.owner		= THIS_MODULE,
-	.read		= briq_panel_read,
-	.write		= briq_panel_write,
-	.open		= briq_panel_open,
-	.release	= briq_panel_release,
-	.llseek		= noop_llseek,
-};
-
-static struct miscdevice briq_panel_miscdev = {
-	BRIQ_PANEL_MINOR,
-	"briq_panel",
-	&briq_panel_fops
-};
-
-static int __init briq_panel_init(void)
-{
-	struct device_node *root = of_find_node_by_path("/");
-	const char *machine;
-	int i;
-
-	machine = of_get_property(root, "model", NULL);
-	if (!machine || strncmp(machine, "TotalImpact,BRIQ-1", 18) != 0) {
-		of_node_put(root);
-		return -ENODEV;
-	}
-	of_node_put(root);
-
-	printk(KERN_INFO
-		"briq_panel: v%s Dr. Karsten Jeppesen (kj@totalimpact.com)\n",
-		BRIQ_PANEL_VER);
-
-	if (!request_region(BRIQ_PANEL_VFD_IOPORT, 4, "BRIQ Front Panel"))
-		return -EBUSY;
-
-	if (!request_region(BRIQ_PANEL_LED_IOPORT, 2, "BRIQ Front Panel")) {
-		release_region(BRIQ_PANEL_VFD_IOPORT, 4);
-		return -EBUSY;
-	}
-	ledpb = inb(BRIQ_PANEL_LED_IOPORT) & 0x000c;
-
-	if (misc_register(&briq_panel_miscdev) < 0) {
-		release_region(BRIQ_PANEL_VFD_IOPORT, 4);
-		release_region(BRIQ_PANEL_LED_IOPORT, 2);
-		return -EBUSY;
-	}
-
-	outb(0x38, BRIQ_PANEL_VFD_IOPORT);	/* Function set */
-	outb(0x01, BRIQ_PANEL_VFD_IOPORT);	/* Clear display */
-	outb(0x0c, BRIQ_PANEL_VFD_IOPORT);	/* Display on */
-	outb(0x06, BRIQ_PANEL_VFD_IOPORT);	/* Entry normal */
-	for (i=0; i<40; i++)
-		vfd[i]=' ';
-#ifndef MODULE
-	vfd[0] = 'L';
-	vfd[1] = 'o';
-	vfd[2] = 'a';
-	vfd[3] = 'd';
-	vfd[4] = 'i';
-	vfd[5] = 'n';
-	vfd[6] = 'g';
-	vfd[7] = ' ';
-	vfd[8] = '.';
-	vfd[9] = '.';
-	vfd[10] = '.';
-#endif /* !MODULE */
-
-	update_vfd();
-
-	return 0;
-}
-
-static void __exit briq_panel_exit(void)
-{
-	misc_deregister(&briq_panel_miscdev);
-	release_region(BRIQ_PANEL_VFD_IOPORT, 4);
-	release_region(BRIQ_PANEL_LED_IOPORT, 2);
-}
-
-module_init(briq_panel_init);
-module_exit(briq_panel_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Karsten Jeppesen <karsten@jeppesens.com>");
-MODULE_DESCRIPTION("Driver for the Total Impact briQ front panel");
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index fd699ccecf5..723725bbb96 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -47,7 +47,7 @@ static void register_buffer(u8 *buf, size_t size)
 	sg_init_one(&sg, buf, size);
 
 	/* There should always be room for one buffer. */
-	if (virtqueue_add_buf(vq, &sg, 0, 1, buf) < 0)
+	if (virtqueue_add_buf(vq, &sg, 0, 1, buf, GFP_KERNEL) < 0)
 		BUG();
 
 	virtqueue_kick(vq);
diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
index 6e40072fbf6..40cc0cf2ded 100644
--- a/drivers/char/i8k.c
+++ b/drivers/char/i8k.c
@@ -69,19 +69,19 @@ MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)");
 MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops");
 MODULE_LICENSE("GPL");
 
-static int force;
+static bool force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Force loading without checking for supported models");
 
-static int ignore_dmi;
+static bool ignore_dmi;
 module_param(ignore_dmi, bool, 0);
 MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match");
 
-static int restricted;
+static bool restricted;
 module_param(restricted, bool, 0);
 MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set");
 
-static int power_status;
+static bool power_status;
 module_param(power_status, bool, 0600);
 MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k");
 
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 9397ab49b72..50fcf9c0456 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -1227,7 +1227,7 @@ static int smi_num; /* Used to sequence the SMIs */
 #define DEFAULT_REGSPACING	1
 #define DEFAULT_REGSIZE		1
 
-static int           si_trydefaults = 1;
+static bool          si_trydefaults = 1;
 static char          *si_type[SI_MAX_PARMS];
 #define MAX_SI_TYPE_STR 30
 static char          si_type_str[MAX_SI_TYPE_STR];
diff --git a/drivers/char/lp.c b/drivers/char/lp.c
index 97c3edb95ae..f4348560706 100644
--- a/drivers/char/lp.c
+++ b/drivers/char/lp.c
@@ -829,7 +829,7 @@ static struct console lpcons = {
 
 static int parport_nr[LP_NO] = { [0 ... LP_NO-1] = LP_PARPORT_UNSPEC };
 static char *parport[LP_NO];
-static int reset;
+static bool reset;
 
 module_param_array(parport, charp, NULL, 0);
 module_param(reset, bool, 0);
diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c
index da3cfee782d..eaade8a1ecd 100644
--- a/drivers/char/nvram.c
+++ b/drivers/char/nvram.c
@@ -94,7 +94,7 @@
 /* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
  * rtc_lock held. Due to the index-port/data-port design of the RTC, we
  * don't want two different things trying to get to it at once. (e.g. the
- * periodic 11 min sync from time.c vs. this driver.)
+ * periodic 11 min sync from kernel/time/ntp.c vs. this driver.)
  */
 
 #include <linux/types.h>
diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c
index a12f52400db..bf586ae1ee8 100644
--- a/drivers/char/nwflash.c
+++ b/drivers/char/nwflash.c
@@ -51,7 +51,7 @@ static int write_block(unsigned long p, const char __user *buf, int count);
 #define KFLASH_ID	0x89A6		//Intel flash
 #define KFLASH_ID4	0xB0D4		//Intel flash 4Meg
 
-static int flashdebug;		//if set - we will display progress msgs
+static bool flashdebug;		//if set - we will display progress msgs
 
 static int gbWriteEnable;
 static int gbWriteBase64Enable;
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index 15781396af2..f6453df4921 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -439,7 +439,7 @@ static int mgslpc_device_count = 0;
  * .text section address and breakpoint on module load.
  * This is useful for use with gdb and add-symbol-file command.
  */
-static int break_on_load=0;
+static bool break_on_load=0;
 
 /*
  * Driver major number, defaults to zero to get auto
@@ -2484,7 +2484,7 @@ static int mgslpc_open(struct tty_struct *tty, struct file * filp)
 
 	/* verify range of specified line number */
 	line = tty->index;
-	if ((line < 0) || (line >= mgslpc_device_count)) {
+	if (line >= mgslpc_device_count) {
 		printk("%s(%d):mgslpc_open with invalid line #%d.\n",
 			__FILE__,__LINE__,line);
 		return -ENODEV;
@@ -2836,7 +2836,6 @@ static int __init synclink_cs_init(void)
 
     /* Initialize the tty_driver structure */
 
-    serial_driver->owner = THIS_MODULE;
     serial_driver->driver_name = "synclink_cs";
     serial_driver->name = "ttySLP";
     serial_driver->major = ttymajor;
diff --git a/drivers/char/ramoops.c b/drivers/char/ramoops.c
index 7c7f42a1f88..2a5e45d2a9f 100644
--- a/drivers/char/ramoops.c
+++ b/drivers/char/ramoops.c
@@ -26,7 +26,6 @@
 #include <linux/module.h>
 #include <linux/kmsg_dump.h>
 #include <linux/time.h>
-#include <linux/err.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/platform_device.h>
@@ -83,8 +82,7 @@ static void ramoops_do_dump(struct kmsg_dumper *dumper,
 	struct timeval timestamp;
 
 	if (reason != KMSG_DUMP_OOPS &&
-	    reason != KMSG_DUMP_PANIC &&
-	    reason != KMSG_DUMP_KEXEC)
+	    reason != KMSG_DUMP_PANIC)
 		return;
 
 	/* Only dump oopses if dump_oops is set */
@@ -126,8 +124,8 @@ static int __init ramoops_probe(struct platform_device *pdev)
 		goto fail3;
 	}
 
-	rounddown_pow_of_two(pdata->mem_size);
-	rounddown_pow_of_two(pdata->record_size);
+	pdata->mem_size = rounddown_pow_of_two(pdata->mem_size);
+	pdata->record_size = rounddown_pow_of_two(pdata->record_size);
 
 	/* Check for the minimum memory size */
 	if (pdata->mem_size < MIN_MEM_SIZE &&
@@ -148,14 +146,6 @@ static int __init ramoops_probe(struct platform_device *pdev)
 	cxt->phys_addr = pdata->mem_address;
 	cxt->record_size = pdata->record_size;
 	cxt->dump_oops = pdata->dump_oops;
-	/*
-	 * Update the module parameter variables as well so they are visible
-	 * through /sys/module/ramoops/parameters/
-	 */
-	mem_size = pdata->mem_size;
-	mem_address = pdata->mem_address;
-	record_size = pdata->record_size;
-	dump_oops = pdata->dump_oops;
 
 	if (!request_mem_region(cxt->phys_addr, cxt->size, "ramoops")) {
 		pr_err("request mem region failed\n");
@@ -176,6 +166,15 @@ static int __init ramoops_probe(struct platform_device *pdev)
 		goto fail1;
 	}
 
+	/*
+	 * Update the module parameter variables as well so they are visible
+	 * through /sys/module/ramoops/parameters/
+	 */
+	mem_size = pdata->mem_size;
+	mem_address = pdata->mem_address;
+	record_size = pdata->record_size;
+	dump_oops = pdata->dump_oops;
+
 	return 0;
 
 fail1:
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 85da8740586..54ca8b23cde 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -387,7 +387,7 @@ static DECLARE_WAIT_QUEUE_HEAD(random_write_wait);
 static struct fasync_struct *fasync;
 
 #if 0
-static int debug;
+static bool debug;
 module_param(debug, bool, 0644);
 #define DEBUG_ENT(fmt, arg...) do { \
 	if (debug) \
@@ -965,6 +965,7 @@ EXPORT_SYMBOL(get_random_bytes);
  */
 static void init_std_data(struct entropy_store *r)
 {
+	int i;
 	ktime_t now;
 	unsigned long flags;
 
@@ -974,6 +975,11 @@ static void init_std_data(struct entropy_store *r)
 
 	now = ktime_get_real();
 	mix_pool_bytes(r, &now, sizeof(now));
+	for (i = r->poolinfo->POOLBYTES; i > 0; i -= sizeof flags) {
+		if (!arch_get_random_long(&flags))
+			break;
+		mix_pool_bytes(r, &flags, sizeof(flags));
+	}
 	mix_pool_bytes(r, utsname(), sizeof(*(utsname())));
 }
 
diff --git a/drivers/char/rtc.c b/drivers/char/rtc.c
index ccd124ab7ca..872e09a02d2 100644
--- a/drivers/char/rtc.c
+++ b/drivers/char/rtc.c
@@ -57,8 +57,8 @@
  *	Note that *all* calls to CMOS_READ and CMOS_WRITE are done with
  *	interrupts disabled. Due to the index-port/data-port (0x70/0x71)
  *	design of the RTC, we don't want two different things trying to
- *	get to it at once. (e.g. the periodic 11 min sync from time.c vs.
- *	this driver.)
+ *	get to it at once. (e.g. the periodic 11 min sync from
+ *      kernel/time/ntp.c vs. this driver.)
  */
 
 #include <linux/interrupt.h>
diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c
index 0c964cdcc22..ce29e7cce52 100644
--- a/drivers/char/tlclk.c
+++ b/drivers/char/tlclk.c
@@ -797,7 +797,7 @@ static int __init tlclk_init(void)
 	telclk_interrupt = (inb(TLCLK_REG7) & 0x0f);
 
 	if (0x0F == telclk_interrupt ) { /* not MCPBL0010 ? */
-		printk(KERN_ERR "telclk_interrup = 0x%x non-mcpbl0010 hw.\n",
+		printk(KERN_ERR "telclk_interrupt = 0x%x non-mcpbl0010 hw.\n",
 			telclk_interrupt);
 		ret = -ENXIO;
 		goto out3;
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index 6a8771f47a5..32362cf35b8 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -846,6 +846,15 @@ int tpm_do_selftest(struct tpm_chip *chip)
 
 	do {
 		rc = __tpm_pcr_read(chip, 0, digest);
+		if (rc == TPM_ERR_DISABLED || rc == TPM_ERR_DEACTIVATED) {
+			dev_info(chip->dev,
+				 "TPM is disabled/deactivated (0x%X)\n", rc);
+			/* TPM is disabled and/or deactivated; driver can
+			 * proceed and TPM does handle commands for
+			 * suspend/resume correctly
+			 */
+			return 0;
+		}
 		if (rc != TPM_WARN_DOING_SELFTEST)
 			return rc;
 		msleep(delay_msec);
diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
index 8c1df302fbb..01054713828 100644
--- a/drivers/char/tpm/tpm.h
+++ b/drivers/char/tpm/tpm.h
@@ -39,6 +39,9 @@ enum tpm_addr {
 };
 
 #define TPM_WARN_DOING_SELFTEST 0x802
+#define TPM_ERR_DEACTIVATED     0x6
+#define TPM_ERR_DISABLED        0x7
+
 #define TPM_HEADER_SIZE		10
 extern ssize_t tpm_show_pubek(struct device *, struct device_attribute *attr,
 				char *);
diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c
index 10cc44ceb5d..70fac9abb0e 100644
--- a/drivers/char/tpm/tpm_tis.c
+++ b/drivers/char/tpm/tpm_tis.c
@@ -76,7 +76,7 @@ enum tis_defaults {
 #define	TPM_RID(l)			(0x0F04 | ((l) << 12))
 
 static LIST_HEAD(tis_chips);
-static DEFINE_SPINLOCK(tis_lock);
+static DEFINE_MUTEX(tis_lock);
 
 #if defined(CONFIG_PNP) && defined(CONFIG_ACPI)
 static int is_itpm(struct pnp_dev *dev)
@@ -255,7 +255,7 @@ out:
 	return size;
 }
 
-static int itpm;
+static bool itpm;
 module_param(itpm, bool, 0444);
 MODULE_PARM_DESC(itpm, "Force iTPM workarounds (found on some Lenovo laptops)");
 
@@ -500,7 +500,7 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int interrupts = 1;
+static bool interrupts = 1;
 module_param(interrupts, bool, 0444);
 MODULE_PARM_DESC(interrupts, "Enable interrupts");
 
@@ -689,9 +689,9 @@ static int tpm_tis_init(struct device *dev, resource_size_t start,
 	}
 
 	INIT_LIST_HEAD(&chip->vendor.list);
-	spin_lock(&tis_lock);
+	mutex_lock(&tis_lock);
 	list_add(&chip->vendor.list, &tis_chips);
-	spin_unlock(&tis_lock);
+	mutex_unlock(&tis_lock);
 
 
 	return 0;
@@ -828,7 +828,7 @@ static struct platform_driver tis_drv = {
 
 static struct platform_device *pdev;
 
-static int force;
+static bool force;
 module_param(force, bool, 0444);
 MODULE_PARM_DESC(force, "Force device probe rather than using ACPI entry");
 static int __init init_tis(void)
@@ -855,7 +855,7 @@ static void __exit cleanup_tis(void)
 {
 	struct tpm_vendor_specific *i, *j;
 	struct tpm_chip *chip;
-	spin_lock(&tis_lock);
+	mutex_lock(&tis_lock);
 	list_for_each_entry_safe(i, j, &tis_chips, list) {
 		chip = to_tpm_chip(i);
 		tpm_remove_hardware(chip->dev);
@@ -871,7 +871,7 @@ static void __exit cleanup_tis(void)
 		iounmap(i->iobase);
 		list_del(&i->list);
 	}
-	spin_unlock(&tis_lock);
+	mutex_unlock(&tis_lock);
 #ifdef CONFIG_PNP
 	if (!force) {
 		pnp_unregister_driver(&tis_pnp_driver);
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index eedd5474850..46b77ede84c 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -184,12 +184,10 @@ static int __init ttyprintk_init(void)
 	if (!ttyprintk_driver)
 		return ret;
 
-	ttyprintk_driver->owner = THIS_MODULE;
 	ttyprintk_driver->driver_name = "ttyprintk";
 	ttyprintk_driver->name = "ttyprintk";
 	ttyprintk_driver->major = TTYAUX_MAJOR;
 	ttyprintk_driver->minor_start = 3;
-	ttyprintk_driver->num = 1;
 	ttyprintk_driver->type = TTY_DRIVER_TYPE_CONSOLE;
 	ttyprintk_driver->init_termios = tty_std_termios;
 	ttyprintk_driver->init_termios.c_oflag = OPOST | OCRNL | ONOCR | ONLRET;
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index ad6e64a2912..8b34c65511e 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -976,7 +976,7 @@ int __init viotap_init(void)
 
 	tape_class = class_create(THIS_MODULE, "tape");
 	if (IS_ERR(tape_class)) {
-		printk(VIOTAPE_KERN_WARN "Unable to allocat class\n");
+		printk(VIOTAPE_KERN_WARN "Unable to allocate class\n");
 		ret = PTR_ERR(tape_class);
 		goto unreg_chrdev;
 	}
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 8e3c46d67cb..b58b5618706 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -392,7 +392,7 @@ static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf)
 
 	sg_init_one(sg, buf->buf, buf->size);
 
-	ret = virtqueue_add_buf(vq, sg, 0, 1, buf);
+	ret = virtqueue_add_buf(vq, sg, 0, 1, buf, GFP_ATOMIC);
 	virtqueue_kick(vq);
 	return ret;
 }
@@ -457,7 +457,7 @@ static ssize_t __send_control_msg(struct ports_device *portdev, u32 port_id,
 	vq = portdev->c_ovq;
 
 	sg_init_one(sg, &cpkt, sizeof(cpkt));
-	if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt) >= 0) {
+	if (virtqueue_add_buf(vq, sg, 1, 0, &cpkt, GFP_ATOMIC) >= 0) {
 		virtqueue_kick(vq);
 		while (!virtqueue_get_buf(vq, &len))
 			cpu_relax();
@@ -506,7 +506,7 @@ static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count,
 	reclaim_consumed_buffers(port);
 
 	sg_init_one(sg, in_buf, in_count);
-	ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf);
+	ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf, GFP_ATOMIC);
 
 	/* Tell Host to go! */
 	virtqueue_kick(out_vq);
@@ -1271,6 +1271,20 @@ static void remove_port(struct kref *kref)
 	kfree(port);
 }
 
+static void remove_port_data(struct port *port)
+{
+	struct port_buffer *buf;
+
+	/* Remove unused data this port might have received. */
+	discard_port_data(port);
+
+	reclaim_consumed_buffers(port);
+
+	/* Remove buffers we queued up for the Host to send us data in. */
+	while ((buf = virtqueue_detach_unused_buf(port->in_vq)))
+		free_buf(buf);
+}
+
 /*
  * Port got unplugged.  Remove port from portdev's list and drop the
  * kref reference.  If no userspace has this port opened, it will
@@ -1278,8 +1292,6 @@ static void remove_port(struct kref *kref)
  */
 static void unplug_port(struct port *port)
 {
-	struct port_buffer *buf;
-
 	spin_lock_irq(&port->portdev->ports_lock);
 	list_del(&port->list);
 	spin_unlock_irq(&port->portdev->ports_lock);
@@ -1300,14 +1312,7 @@ static void unplug_port(struct port *port)
 		hvc_remove(port->cons.hvc);
 	}
 
-	/* Remove unused data this port might have received. */
-	discard_port_data(port);
-
-	reclaim_consumed_buffers(port);
-
-	/* Remove buffers we queued up for the Host to send us data in. */
-	while ((buf = virtqueue_detach_unused_buf(port->in_vq)))
-		free_buf(buf);
+	remove_port_data(port);
 
 	/*
 	 * We should just assume the device itself has gone off --
@@ -1659,6 +1664,28 @@ static const struct file_operations portdev_fops = {
 	.owner = THIS_MODULE,
 };
 
+static void remove_vqs(struct ports_device *portdev)
+{
+	portdev->vdev->config->del_vqs(portdev->vdev);
+	kfree(portdev->in_vqs);
+	kfree(portdev->out_vqs);
+}
+
+static void remove_controlq_data(struct ports_device *portdev)
+{
+	struct port_buffer *buf;
+	unsigned int len;
+
+	if (!use_multiport(portdev))
+		return;
+
+	while ((buf = virtqueue_get_buf(portdev->c_ivq, &len)))
+		free_buf(buf);
+
+	while ((buf = virtqueue_detach_unused_buf(portdev->c_ivq)))
+		free_buf(buf);
+}
+
 /*
  * Once we're further in boot, we get probed like any other virtio
  * device.
@@ -1764,9 +1791,7 @@ free_vqs:
 	/* The host might want to notify mgmt sw about device add failure */
 	__send_control_msg(portdev, VIRTIO_CONSOLE_BAD_ID,
 			   VIRTIO_CONSOLE_DEVICE_READY, 0);
-	vdev->config->del_vqs(vdev);
-	kfree(portdev->in_vqs);
-	kfree(portdev->out_vqs);
+	remove_vqs(portdev);
 free_chrdev:
 	unregister_chrdev(portdev->chr_major, "virtio-portsdev");
 free:
@@ -1804,21 +1829,8 @@ static void virtcons_remove(struct virtio_device *vdev)
 	 * have to just stop using the port, as the vqs are going
 	 * away.
 	 */
-	if (use_multiport(portdev)) {
-		struct port_buffer *buf;
-		unsigned int len;
-
-		while ((buf = virtqueue_get_buf(portdev->c_ivq, &len)))
-			free_buf(buf);
-
-		while ((buf = virtqueue_detach_unused_buf(portdev->c_ivq)))
-			free_buf(buf);
-	}
-
-	vdev->config->del_vqs(vdev);
-	kfree(portdev->in_vqs);
-	kfree(portdev->out_vqs);
-
+	remove_controlq_data(portdev);
+	remove_vqs(portdev);
 	kfree(portdev);
 }
 
@@ -1832,6 +1844,68 @@ static unsigned int features[] = {
 	VIRTIO_CONSOLE_F_MULTIPORT,
 };
 
+#ifdef CONFIG_PM
+static int virtcons_freeze(struct virtio_device *vdev)
+{
+	struct ports_device *portdev;
+	struct port *port;
+
+	portdev = vdev->priv;
+
+	vdev->config->reset(vdev);
+
+	virtqueue_disable_cb(portdev->c_ivq);
+	cancel_work_sync(&portdev->control_work);
+	/*
+	 * Once more: if control_work_handler() was running, it would
+	 * enable the cb as the last step.
+	 */
+	virtqueue_disable_cb(portdev->c_ivq);
+	remove_controlq_data(portdev);
+
+	list_for_each_entry(port, &portdev->ports, list) {
+		virtqueue_disable_cb(port->in_vq);
+		virtqueue_disable_cb(port->out_vq);
+		/*
+		 * We'll ask the host later if the new invocation has
+		 * the port opened or closed.
+		 */
+		port->host_connected = false;
+		remove_port_data(port);
+	}
+	remove_vqs(portdev);
+
+	return 0;
+}
+
+static int virtcons_restore(struct virtio_device *vdev)
+{
+	struct ports_device *portdev;
+	struct port *port;
+	int ret;
+
+	portdev = vdev->priv;
+
+	ret = init_vqs(portdev);
+	if (ret)
+		return ret;
+
+	if (use_multiport(portdev))
+		fill_queue(portdev->c_ivq, &portdev->cvq_lock);
+
+	list_for_each_entry(port, &portdev->ports, list) {
+		port->in_vq = portdev->in_vqs[port->id];
+		port->out_vq = portdev->out_vqs[port->id];
+
+		fill_queue(port->in_vq, &port->inbuf_lock);
+
+		/* Get port open/close status on the host */
+		send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1);
+	}
+	return 0;
+}
+#endif
+
 static struct virtio_driver virtio_console = {
 	.feature_table = features,
 	.feature_table_size = ARRAY_SIZE(features),
@@ -1841,6 +1915,10 @@ static struct virtio_driver virtio_console = {
 	.probe =	virtcons_probe,
 	.remove =	virtcons_remove,
 	.config_changed = config_intr,
+#ifdef CONFIG_PM
+	.freeze =	virtcons_freeze,
+	.restore =	virtcons_restore,
+#endif
 };
 
 static int __init init(void)