diff options
Diffstat (limited to 'drivers/char')
| -rw-r--r-- | drivers/char/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/char/agp/intel-agp.c | 15 | ||||
| -rw-r--r-- | drivers/char/hvc_beat.c | 4 | ||||
| -rw-r--r-- | drivers/char/hvc_console.c | 9 | ||||
| -rw-r--r-- | drivers/char/hvc_console.h | 9 | ||||
| -rw-r--r-- | drivers/char/hvc_iseries.c | 2 | ||||
| -rw-r--r-- | drivers/char/hvc_iucv.c | 2 | ||||
| -rw-r--r-- | drivers/char/hvc_rtas.c | 2 | ||||
| -rw-r--r-- | drivers/char/hvc_udbg.c | 2 | ||||
| -rw-r--r-- | drivers/char/hvc_vio.c | 2 | ||||
| -rw-r--r-- | drivers/char/hvc_xen.c | 2 | ||||
| -rw-r--r-- | drivers/char/hw_random/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/char/hw_random/Makefile | 1 | ||||
| -rw-r--r-- | drivers/char/hw_random/nomadik-rng.c | 103 | ||||
| -rw-r--r-- | drivers/char/pcmcia/cm4000_cs.c | 2 | ||||
| -rw-r--r-- | drivers/char/virtio_console.c | 1578 | ||||
| -rw-r--r-- | drivers/char/vme_scc.c | 12 |
17 files changed, 1585 insertions, 180 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index e023682be2c..3141dd3b6e5 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -666,6 +666,14 @@ config VIRTIO_CONSOLE help Virtio console for use with lguest and other hypervisors. + Also serves as a general-purpose serial device for data + transfer between the guest and host. Character devices at + /dev/vportNpn will be created when corresponding ports are + found, where N is the device number and n is the port number + within that device. If specified by the host, a sysfs + attribute called 'name' will be populated with a name for + the port which can be used by udev scripts to create a + symlink to the device. config HVCS tristate "IBM Hypervisor Virtual Console Server support" diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 3999a5f25f3..8a713f1e965 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -8,6 +8,7 @@ #include <linux/kernel.h> #include <linux/pagemap.h> #include <linux/agp_backend.h> +#include <asm/smp.h> #include "agp.h" /* @@ -815,12 +816,6 @@ static void intel_i830_setup_flush(void) intel_i830_fini_flush(); } -static void -do_wbinvd(void *null) -{ - wbinvd(); -} - /* The chipset_flush interface needs to get data that has already been * flushed out of the CPU all the way out to main memory, because the GPU * doesn't snoop those buffers. @@ -837,12 +832,10 @@ static void intel_i830_chipset_flush(struct agp_bridge_data *bridge) memset(pg, 0, 1024); - if (cpu_has_clflush) { + if (cpu_has_clflush) clflush_cache_range(pg, 1024); - } else { - if (on_each_cpu(do_wbinvd, NULL, 1) != 0) - printk(KERN_ERR "Timed out waiting for cache flush.\n"); - } + else if (wbinvd_on_all_cpus() != 0) + printk(KERN_ERR "Timed out waiting for cache flush.\n"); } /* The intel i830 automatically initializes the agp aperture during POST. diff --git a/drivers/char/hvc_beat.c b/drivers/char/hvc_beat.c index 0afc8b82212..5fe4631e2a6 100644 --- a/drivers/char/hvc_beat.c +++ b/drivers/char/hvc_beat.c @@ -84,7 +84,7 @@ static int hvc_beat_put_chars(uint32_t vtermno, const char *buf, int cnt) return cnt; } -static struct hv_ops hvc_beat_get_put_ops = { +static const struct hv_ops hvc_beat_get_put_ops = { .get_chars = hvc_beat_get_chars, .put_chars = hvc_beat_put_chars, }; @@ -99,7 +99,7 @@ static int hvc_beat_config(char *p) static int __init hvc_beat_console_init(void) { - if (hvc_beat_useit && machine_is_compatible("Beat")) { + if (hvc_beat_useit && of_machine_is_compatible("Beat")) { hvc_instantiate(0, 0, &hvc_beat_get_put_ops); } return 0; diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index 416d3423150..4c3b59be286 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -125,7 +125,7 @@ static struct hvc_struct *hvc_get_by_index(int index) * console interfaces but can still be used as a tty device. This has to be * static because kmalloc will not work during early console init. */ -static struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES]; +static const struct hv_ops *cons_ops[MAX_NR_HVC_CONSOLES]; static uint32_t vtermnos[MAX_NR_HVC_CONSOLES] = {[0 ... MAX_NR_HVC_CONSOLES - 1] = -1}; @@ -247,7 +247,7 @@ static void destroy_hvc_struct(struct kref *kref) * vty adapters do NOT get an hvc_instantiate() callback since they * appear after early console init. */ -int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops) +int hvc_instantiate(uint32_t vtermno, int index, const struct hv_ops *ops) { struct hvc_struct *hp; @@ -748,8 +748,9 @@ static const struct tty_operations hvc_ops = { .chars_in_buffer = hvc_chars_in_buffer, }; -struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data, - struct hv_ops *ops, int outbuf_size) +struct hvc_struct *hvc_alloc(uint32_t vtermno, int data, + const struct hv_ops *ops, + int outbuf_size) { struct hvc_struct *hp; int i; diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h index 10950ca706d..54381eba4e4 100644 --- a/drivers/char/hvc_console.h +++ b/drivers/char/hvc_console.h @@ -55,7 +55,7 @@ struct hvc_struct { int outbuf_size; int n_outbuf; uint32_t vtermno; - struct hv_ops *ops; + const struct hv_ops *ops; int irq_requested; int data; struct winsize ws; @@ -76,11 +76,12 @@ struct hv_ops { }; /* Register a vterm and a slot index for use as a console (console_init) */ -extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops); +extern int hvc_instantiate(uint32_t vtermno, int index, + const struct hv_ops *ops); /* register a vterm for hvc tty operation (module_init or hotplug add) */ -extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int data, - struct hv_ops *ops, int outbuf_size); +extern struct hvc_struct * hvc_alloc(uint32_t vtermno, int data, + const struct hv_ops *ops, int outbuf_size); /* remove a vterm from hvc tty operation (module_exit or hotplug remove) */ extern int hvc_remove(struct hvc_struct *hp); diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index 936d05bf37f..fd0242676a2 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -197,7 +197,7 @@ done: return sent; } -static struct hv_ops hvc_get_put_ops = { +static const struct hv_ops hvc_get_put_ops = { .get_chars = get_chars, .put_chars = put_chars, .notifier_add = notifier_add_irq, diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c index fe62bd0e17b..21681a81cc3 100644 --- a/drivers/char/hvc_iucv.c +++ b/drivers/char/hvc_iucv.c @@ -922,7 +922,7 @@ static int hvc_iucv_pm_restore_thaw(struct device *dev) /* HVC operations */ -static struct hv_ops hvc_iucv_ops = { +static const struct hv_ops hvc_iucv_ops = { .get_chars = hvc_iucv_get_chars, .put_chars = hvc_iucv_put_chars, .notifier_add = hvc_iucv_notifier_add, diff --git a/drivers/char/hvc_rtas.c b/drivers/char/hvc_rtas.c index 88590d04004..61c4a61558d 100644 --- a/drivers/char/hvc_rtas.c +++ b/drivers/char/hvc_rtas.c @@ -71,7 +71,7 @@ static int hvc_rtas_read_console(uint32_t vtermno, char *buf, int count) return i; } -static struct hv_ops hvc_rtas_get_put_ops = { +static const struct hv_ops hvc_rtas_get_put_ops = { .get_chars = hvc_rtas_read_console, .put_chars = hvc_rtas_write_console, }; diff --git a/drivers/char/hvc_udbg.c b/drivers/char/hvc_udbg.c index bd63ba878a5..b0957e61a7b 100644 --- a/drivers/char/hvc_udbg.c +++ b/drivers/char/hvc_udbg.c @@ -58,7 +58,7 @@ static int hvc_udbg_get(uint32_t vtermno, char *buf, int count) return i; } -static struct hv_ops hvc_udbg_ops = { +static const struct hv_ops hvc_udbg_ops = { .get_chars = hvc_udbg_get, .put_chars = hvc_udbg_put, }; diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c index 10be343d6ae..27370e99c66 100644 --- a/drivers/char/hvc_vio.c +++ b/drivers/char/hvc_vio.c @@ -77,7 +77,7 @@ static int filtered_get_chars(uint32_t vtermno, char *buf, int count) return got; } -static struct hv_ops hvc_get_put_ops = { +static const struct hv_ops hvc_get_put_ops = { .get_chars = filtered_get_chars, .put_chars = hvc_put_chars, .notifier_add = notifier_add_irq, diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index b1a71638c77..60446f82a3f 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -122,7 +122,7 @@ static int read_console(uint32_t vtermno, char *buf, int len) return recv; } -static struct hv_ops hvc_ops = { +static const struct hv_ops hvc_ops = { .get_chars = read_console, .put_chars = write_console, .notifier_add = notifier_add_irq, diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 87060266ef9..6ea1014697d 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -186,3 +186,15 @@ config HW_RANDOM_MXC_RNGA module will be called mxc-rnga. If unsure, say Y. + +config HW_RANDOM_NOMADIK + tristate "ST-Ericsson Nomadik Random Number Generator support" + depends on HW_RANDOM && PLAT_NOMADIK + ---help--- + This driver provides kernel-side support for the Random Number + Generator hardware found on ST-Ericsson SoCs (8815 and 8500). + + To compile this driver as a module, choose M here: the + module will be called nomadik-rng. + + If unsure, say Y. diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile index 5eeb1303f0d..4273308aa1e 100644 --- a/drivers/char/hw_random/Makefile +++ b/drivers/char/hw_random/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o obj-$(CONFIG_HW_RANDOM_TX4939) += tx4939-rng.o obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o obj-$(CONFIG_HW_RANDOM_OCTEON) += octeon-rng.o +obj-$(CONFIG_HW_RANDOM_NOMADIK) += nomadik-rng.o diff --git a/drivers/char/hw_random/nomadik-rng.c b/drivers/char/hw_random/nomadik-rng.c new file mode 100644 index 00000000000..a8b4c401014 --- /dev/null +++ b/drivers/char/hw_random/nomadik-rng.c @@ -0,0 +1,103 @@ +/* + * Nomadik RNG support + * Copyright 2009 Alessandro Rubini + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/hw_random.h> +#include <linux/io.h> + +static int nmk_rng_read(struct hwrng *rng, void *data, size_t max, bool wait) +{ + void __iomem *base = (void __iomem *)rng->priv; + + /* + * The register is 32 bits and gives 16 random bits (low half). + * A subsequent read will delay the core for 400ns, so we just read + * once and accept the very unlikely very small delay, even if wait==0. + */ + *(u16 *)data = __raw_readl(base + 8) & 0xffff; + return 2; +} + +/* we have at most one RNG per machine, granted */ +static struct hwrng nmk_rng = { + .name = "nomadik", + .read = nmk_rng_read, +}; + +static int nmk_rng_probe(struct amba_device *dev, struct amba_id *id) +{ + void __iomem *base; + int ret; + + ret = amba_request_regions(dev, dev->dev.init_name); + if (ret) + return ret; + ret = -ENOMEM; + base = ioremap(dev->res.start, resource_size(&dev->res)); + if (!base) + goto out_release; + nmk_rng.priv = (unsigned long)base; + ret = hwrng_register(&nmk_rng); + if (ret) + goto out_unmap; + return 0; + +out_unmap: + iounmap(base); +out_release: + amba_release_regions(dev); + return ret; +} + +static int nmk_rng_remove(struct amba_device *dev) +{ + void __iomem *base = (void __iomem *)nmk_rng.priv; + hwrng_unregister(&nmk_rng); + iounmap(base); + amba_release_regions(dev); + return 0; +} + +static struct amba_id nmk_rng_ids[] = { + { + .id = 0x000805e1, + .mask = 0x000fffff, /* top bits are rev and cfg: accept all */ + }, + {0, 0}, +}; + +static struct amba_driver nmk_rng_driver = { + .drv = { + .owner = THIS_MODULE, + .name = "rng", + }, + .probe = nmk_rng_probe, + .remove = nmk_rng_remove, + .id_table = nmk_rng_ids, +}; + +static int __init nmk_rng_init(void) +{ + return amba_driver_register(&nmk_rng_driver); +} + +static void __devexit nmk_rng_exit(void) +{ + amba_driver_unregister(&nmk_rng_driver); +} + +module_init(nmk_rng_init); +module_exit(nmk_rng_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 2db4c0a29b0..c9bc896d68a 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1047,7 +1047,7 @@ release_io: static ssize_t cmm_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos) { - struct cm4000_dev *dev = (struct cm4000_dev *) filp->private_data; + struct cm4000_dev *dev = filp->private_data; unsigned int iobase = dev->p_dev->io.BasePort1; unsigned short s; unsigned char tmp; diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index a035ae39a35..213373b5f17 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1,18 +1,6 @@ -/*D:300 - * The Guest console driver - * - * Writing console drivers is one of the few remaining Dark Arts in Linux. - * Fortunately for us, the path of virtual consoles has been well-trodden by - * the PowerPC folks, who wrote "hvc_console.c" to generically support any - * virtual console. We use that infrastructure which only requires us to write - * the basic put_chars and get_chars functions and call the right register - * functions. - :*/ - -/*M:002 The console can be flooded: while the Guest is processing input the - * Host can send more. Buffering in the Host could alleviate this, but it is a - * difficult problem in general. :*/ -/* Copyright (C) 2006, 2007 Rusty Russell, IBM Corporation +/* + * Copyright (C) 2006, 2007, 2009 Rusty Russell, IBM Corporation + * Copyright (C) 2009, 2010 Red Hat, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -28,142 +16,694 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/cdev.h> +#include <linux/debugfs.h> +#include <linux/device.h> #include <linux/err.h> +#include <linux/fs.h> #include <linux/init.h> +#include <linux/list.h> +#include <linux/poll.h> +#include <linux/sched.h> +#include <linux/spinlock.h> #include <linux/virtio.h> #include <linux/virtio_console.h> +#include <linux/wait.h> +#include <linux/workqueue.h> #include "hvc_console.h" -/*D:340 These represent our input and output console queues, and the virtio - * operations for them. */ -static struct virtqueue *in_vq, *out_vq; -static struct virtio_device *vdev; +/* + * This is a global struct for storing common data for all the devices + * this driver handles. + * + * Mainly, it has a linked list for all the consoles in one place so + * that callbacks from hvc for get_chars(), put_chars() work properly + * across multiple devices and multiple ports per device. + */ +struct ports_driver_data { + /* Used for registering chardevs */ + struct class *class; + + /* Used for exporting per-port information to debugfs */ + struct dentry *debugfs_dir; + + /* Number of devices this driver is handling */ + unsigned int index; + + /* + * This is used to keep track of the number of hvc consoles + * spawned by this driver. This number is given as the first + * argument to hvc_alloc(). To correctly map an initial + * console spawned via hvc_instantiate to the console being + * hooked up via hvc_alloc, we need to pass the same vtermno. + * + * We also just assume the first console being initialised was + * the first one that got used as the initial console. + */ + unsigned int next_vtermno; + + /* All the console devices handled by this driver */ + struct list_head consoles; +}; +static struct ports_driver_data pdrvdata; + +DEFINE_SPINLOCK(pdrvdata_lock); + +/* This struct holds information that's relevant only for console ports */ +struct console { + /* We'll place all consoles in a list in the pdrvdata struct */ + struct list_head list; + + /* The hvc device associated with this console port */ + struct hvc_struct *hvc; + + /* + * This number identifies the number that we used to register + * with hvc in hvc_instantiate() and hvc_alloc(); this is the + * number passed on by the hvc callbacks to us to + * differentiate between the other console ports handled by + * this driver + */ + u32 vtermno; +}; + +struct port_buffer { + char *buf; + + /* size of the buffer in *buf above */ + size_t size; + + /* used length of the buffer */ + size_t len; + /* offset in the buf from which to consume data */ + size_t offset; +}; + +/* + * This is a per-device struct that stores data common to all the + * ports for that device (vdev->priv). + */ +struct ports_device { + /* + * Workqueue handlers where we process deferred work after + * notification + */ + struct work_struct control_work; + struct work_struct config_work; + + struct list_head ports; + + /* To protect the list of ports */ + spinlock_t ports_lock; + + /* To protect the vq operations for the control channel */ + spinlock_t cvq_lock; + + /* The current config space is stored here */ + struct virtio_console_config config; + + /* The virtio device we're associated with */ + struct virtio_device *vdev; + + /* + * A couple of virtqueues for the control channel: one for + * guest->host transfers, one for host->guest transfers + */ + struct virtqueue *c_ivq, *c_ovq; + + /* Array of per-port IO virtqueues */ + struct virtqueue **in_vqs, **out_vqs; + + /* Used for numbering devices for sysfs and debugfs */ + unsigned int drv_index; + + /* Major number for this device. Ports will be created as minors. */ + int chr_major; +}; + +/* This struct holds the per-port data */ +struct port { + /* Next port in the list, head is in the ports_device */ + struct list_head list; + + /* Pointer to the parent virtio_console device */ + struct ports_device *portdev; + + /* The current buffer from which data has to be fed to readers */ + struct port_buffer *inbuf; + + /* + * To protect the operations on the in_vq associated with this + * port. Has to be a spinlock because it can be called from + * interrupt context (get_char()). + */ + spinlock_t inbuf_lock; + + /* The IO vqs for this port */ + struct virtqueue *in_vq, *out_vq; + + /* File in the debugfs directory that exposes this port's information */ + struct dentry *debugfs_file; + + /* + * The entries in this struct will be valid if this port is + * hooked up to an hvc console + */ + struct console cons; + + /* Each port associates with a separate char device */ + struct cdev cdev; + struct device *dev; + + /* A waitqueue for poll() or blocking read operations */ + wait_queue_head_t waitqueue; + + /* The 'name' of the port that we expose via sysfs properties */ + char *name; + + /* The 'id' to identify the port with the Host */ + u32 id; + + /* Is the host device open */ + bool host_connected; + + /* We should allow only one process to open a port */ + bool guest_connected; +}; + +/* This is the very early arch-specified put chars function. */ +static int (*early_put_chars)(u32, const char *, int); + +static struct port *find_port_by_vtermno(u32 vtermno) +{ + struct port *port; + struct console *cons; + unsigned long flags; + + spin_lock_irqsave(&pdrvdata_lock, flags); + list_for_each_entry(cons, &pdrvdata.consoles, list) { + if (cons->vtermno == vtermno) { + port = container_of(cons, struct port, cons); + goto out; + } + } + port = NULL; +out: + spin_unlock_irqrestore(&pdrvdata_lock, flags); + return port; +} + +static struct port *find_port_by_id(struct ports_device *portdev, u32 id) +{ + struct port *port; + unsigned long flags; + + spin_lock_irqsave(&portdev->ports_lock, flags); + list_for_each_entry(port, &portdev->ports, list) + if (port->id == id) + goto out; + port = NULL; +out: + spin_unlock_irqrestore(&portdev->ports_lock, flags); + + return port; +} + +static struct port *find_port_by_vq(struct ports_device *portdev, + struct virtqueue *vq) +{ + struct port *port; + unsigned long flags; + + spin_lock_irqsave(&portdev->ports_lock, flags); + list_for_each_entry(port, &portdev->ports, list) + if (port->in_vq == vq || port->out_vq == vq) + goto out; + port = NULL; +out: + spin_unlock_irqrestore(&portdev->ports_lock, flags); + return port; +} + +static bool is_console_port(struct port *port) +{ + if (port->cons.hvc) + return true; + return false; +} + +static inline bool use_multiport(struct ports_device *portdev) +{ + /* + * This condition can be true when put_chars is called from + * early_init + */ + if (!portdev->vdev) + return 0; + return portdev->vdev->features[0] & (1 << VIRTIO_CONSOLE_F_MULTIPORT); +} -/* This is our input buffer, and how much data is left in it. */ -static unsigned int in_len; -static char *in, *inbuf; +static void free_buf(struct port_buffer *buf) +{ + kfree(buf->buf); + kfree(buf); +} + +static struct port_buffer *alloc_buf(size_t buf_size) +{ + struct port_buffer *buf; -/* The operations for our console. */ -static struct hv_ops virtio_cons; + buf = kmalloc(sizeof(*buf), GFP_KERNEL); + if (!buf) + goto fail; + buf->buf = kzalloc(buf_size, GFP_KERNEL); + if (!buf->buf) + goto free_buf; + buf->len = 0; + buf->offset = 0; + buf->size = buf_size; + return buf; + +free_buf: + kfree(buf); +fail: + return NULL; +} + +/* Callers should take appropriate locks */ +static void *get_inbuf(struct port *port) +{ + struct port_buffer *buf; + struct virtqueue *vq; + unsigned int len; -/* The hvc device */ -static struct hvc_struct *hvc; + vq = port->in_vq; + buf = vq->vq_ops->get_buf(vq, &len); + if (buf) { + buf->len = len; + buf->offset = 0; + } + return buf; +} -/*D:310 The put_chars() callback is pretty straightforward. +/* + * Create a scatter-gather list representing our input buffer and put + * it in the queue. * - * We turn the characters into a scatter-gather list, add it to the output - * queue and then kick the Host. Then we sit here waiting for it to finish: - * inefficient in theory, but in practice implementations will do it - * immediately (lguest's Launcher does). */ -static int put_chars(u32 vtermno, const char *buf, int count) + * Callers should take appropriate locks. + */ +static int add_inbuf(struct virtqueue *vq, struct port_buffer *buf) { struct scatterlist sg[1]; + int ret; + + sg_init_one(sg, buf->buf, buf->size); + + ret = vq->vq_ops->add_buf(vq, sg, 0, 1, buf); + vq->vq_ops->kick(vq); + return ret; +} + +/* Discard any unread data this port has. Callers lockers. */ +static void discard_port_data(struct port *port) +{ + struct port_buffer *buf; + struct virtqueue *vq; unsigned int len; + int ret; - /* This is a convenient routine to initialize a single-elem sg list */ - sg_init_one(sg, buf, count); + vq = port->in_vq; + if (port->inbuf) + buf = port->inbuf; + else + buf = vq->vq_ops->get_buf(vq, &len); - /* add_buf wants a token to identify this buffer: we hand it any - * non-NULL pointer, since there's only ever one buffer. */ - if (out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, (void *)1) >= 0) { - /* Tell Host to go! */ - out_vq->vq_ops->kick(out_vq); - /* Chill out until it's done with the buffer. */ - while (!out_vq->vq_ops->get_buf(out_vq, &len)) - cpu_relax(); + ret = 0; + while (buf) { + if (add_inbuf(vq, buf) < 0) { + ret++; + free_buf(buf); + } + buf = vq->vq_ops->get_buf(vq, &len); } + port->inbuf = NULL; + if (ret) + dev_warn(port->dev, "Errors adding %d buffers back to vq\n", + ret); +} - /* We're expected to return the amount of data we wrote: all of it. */ - return count; +static bool port_has_data(struct port *port) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&port->inbuf_lock, flags); + if (port->inbuf) { + ret = true; + goto out; + } + port->inbuf = get_inbuf(port); + if (port->inbuf) { + ret = true; + goto out; + } + ret = false; +out: + spin_unlock_irqrestore(&port->inbuf_lock, flags); + return ret; } -/* Create a scatter-gather list representing our input buffer and put it in the - * queue. */ -static void add_inbuf(void) +static ssize_t send_control_msg(struct port *port, unsigned int event, + unsigned int value) { struct scatterlist sg[1]; - sg_init_one(sg, inbuf, PAGE_SIZE); + struct virtio_console_control cpkt; + struct virtqueue *vq; + int len; + + if (!use_multiport(port->portdev)) + return 0; + + cpkt.id = port->id; + cpkt.event = event; + cpkt.value = value; + + vq = port->portdev->c_ovq; - /* We should always be able to add one buffer to an empty queue. */ - if (in_vq->vq_ops->add_buf(in_vq, sg, 0, 1, inbuf) < 0) - BUG(); - in_vq->vq_ops->kick(in_vq); + sg_init_one(sg, &cpkt, sizeof(cpkt)); + if (vq->vq_ops->add_buf(vq, sg, 1, 0, &cpkt) >= 0) { + vq->vq_ops->kick(vq); + while (!vq->vq_ops->get_buf(vq, &len)) + cpu_relax(); + } + return 0; } -/*D:350 get_chars() is the callback from the hvc_console infrastructure when - * an interrupt is received. - * - * Most of the code deals with the fact that the hvc_console() infrastructure - * only asks us for 16 bytes at a time. We keep in_offset and in_used fields - * for partially-filled buffers. */ -static int get_chars(u32 vtermno, char *buf, int count) +static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count) { - /* If we don't have an input queue yet, we can't get input. */ - BUG_ON(!in_vq); + struct scatterlist sg[1]; + struct virtqueue *out_vq; + ssize_t ret; + unsigned int len; + + out_vq = port->out_vq; + + sg_init_one(sg, in_buf, in_count); + ret = out_vq->vq_ops->add_buf(out_vq, sg, 1, 0, in_buf); + + /* Tell Host to go! */ + out_vq->vq_ops->kick(out_vq); + + if (ret < 0) { + len = 0; + goto fail; + } + + /* + * Wait till the host acknowledges it pushed out the data we + * sent. Also ensure we return to userspace the number of + * bytes that were successfully consumed by the host. + */ + while (!out_vq->vq_ops->get_buf(out_vq, &len)) + cpu_relax(); +fail: + /* We're expected to return the amount of data we wrote */ + return len; +} + +/* + * Give out the data that's requested from the buffer that we have + * queued up. + */ +static ssize_t fill_readbuf(struct port *port, char *out_buf, size_t out_count, + bool to_user) +{ + struct port_buffer *buf; + unsigned long flags; + + if (!out_count || !port_has_data(port)) + return 0; + + buf = port->inbuf; + out_count = min(out_count, buf->len - buf->offset); + + if (to_user) { + ssize_t ret; + + ret = copy_to_user(out_buf, buf->buf + buf->offset, out_count); + if (ret) + return -EFAULT; + } else { + memcpy(out_buf, buf->buf + buf->offset, out_count); + } + + buf->offset += out_count; + + if (buf->offset == buf->len) { + /* + * We're done using all the data in this buffer. + * Re-queue so that the Host can send us more data. + */ + spin_lock_irqsave(&port->inbuf_lock, flags); + port->inbuf = NULL; + + if (add_inbuf(port->in_vq, buf) < 0) + dev_warn(port->dev, "failed add_buf\n"); + + spin_unlock_irqrestore(&port->inbuf_lock, flags); + } + /* Return the number of bytes actually copied */ + return out_count; +} - /* No buffer? Try to get one. */ - if (!in_len) { - in = in_vq->vq_ops->get_buf(in_vq, &in_len); - if (!in) +/* The condition that must be true for polling to end */ +static bool wait_is_over(struct port *port) +{ + return port_has_data(port) || !port->host_connected; +} + +static ssize_t port_fops_read(struct file *filp, char __user *ubuf, + size_t count, loff_t *offp) +{ + struct port *port; + ssize_t ret; + + port = filp->private_data; + + if (!port_has_data(port)) { + /* + * If nothing's connected on the host just return 0 in + * case of list_empty; this tells the userspace app + * that there's no connection + */ + if (!port->host_connected) return 0; + if (filp->f_flags & O_NONBLOCK) + return -EAGAIN; + + ret = wait_event_interruptible(port->waitqueue, + wait_is_over(port)); + if (ret < 0) + return ret; + } + /* + * We could've received a disconnection message while we were + * waiting for more data. + * + * This check is not clubbed in the if() statement above as we + * might receive some data as well as the host could get + * disconnected after we got woken up from our wait. So we + * really want to give off whatever data we have and only then + * check for host_connected. + */ + if (!port_has_data(port) && !port->host_connected) + return 0; + + return fill_readbuf(port, ubuf, count, true); +} + +static ssize_t port_fops_write(struct file *filp, const char __user *ubuf, + size_t count, loff_t *offp) +{ + struct port *port; + char *buf; + ssize_t ret; + + port = filp->private_data; + + count = min((size_t)(32 * 1024), count); + + buf = kmalloc(count, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = copy_from_user(buf, ubuf, count); + if (ret) { + ret = -EFAULT; + goto free_buf; } - /* You want more than we have to give? Well, try wanting less! */ - if (in_len < count) - count = in_len; + ret = send_buf(port, buf, count); +free_buf: + kfree(buf); + return ret; +} + +static unsigned int port_fops_poll(struct file *filp, poll_table *wait) +{ + struct port *port; + unsigned int ret; + + port = filp->private_data; + poll_wait(filp, &port->waitqueue, wait); + + ret = 0; + if (port->inbuf) + ret |= POLLIN | POLLRDNORM; + if (port->host_connected) + ret |= POLLOUT; + if (!port->host_connected) + ret |= POLLHUP; + + return ret; +} + +static int port_fops_release(struct inode *inode, struct file *filp) +{ + struct port *port; + + port = filp->private_data; + + /* Notify host of port being closed */ + send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0); + + spin_lock_irq(&port->inbuf_lock); + port->guest_connected = false; + + discard_port_data(port); + + spin_unlock_irq(&port->inbuf_lock); + + return 0; +} + +static int port_fops_open(struct inode *inode, struct file *filp) +{ + struct cdev *cdev = inode->i_cdev; + struct port *port; + + port = container_of(cdev, struct port, cdev); + filp->private_data = port; + + /* + * Don't allow opening of console port devices -- that's done + * via /dev/hvc + */ + if (is_console_port(port)) + return -ENXIO; + + /* Allow only one process to open a particular port at a time */ + spin_lock_irq(&port->inbuf_lock); + if (port->guest_connected) { + spin_unlock_irq(&port->inbuf_lock); + return -EMFILE; + } - /* Copy across to their buffer and increment offset. */ - memcpy(buf, in, count); - in += count; - in_len -= count; + port->guest_connected = true; + spin_unlock_irq(&port->inbuf_lock); - /* Finished? Re-register buffer so Host will use it again. */ - if (in_len == 0) - add_inbuf(); + /* Notify host of port being opened */ + send_control_msg(filp->private_data, VIRTIO_CONSOLE_PORT_OPEN, 1); - return count; + return 0; } -/*:*/ -/*D:320 Console drivers are initialized very early so boot messages can go out, - * so we do things slightly differently from the generic virtio initialization - * of the net and block drivers. +/* + * The file operations that we support: programs in the guest can open + * a console device, read from it, write to it, poll for data and + * close it. The devices are at + * /dev/vport<device number>p<port number> + */ +static const struct file_operations port_fops = { + .owner = THIS_MODULE, + .open = port_fops_open, + .read = port_fops_read, + .write = port_fops_write, + .poll = port_fops_poll, + .release = port_fops_release, +}; + +/* + * The put_chars() callback is pretty straightforward. * - * At this stage, the console is output-only. It's too early to set up a - * virtqueue, so we let the drivers do some boutique early-output thing. */ -int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)) + * We turn the characters into a scatter-gather list, add it to the + * output queue and then kick the Host. Then we sit here waiting for + * it to finish: inefficient in theory, but in practice + * implementations will do it immediately (lguest's Launcher does). + */ +static int put_chars(u32 vtermno, const char *buf, int count) { - virtio_cons.put_chars = put_chars; - return hvc_instantiate(0, 0, &virtio_cons); + struct port *port; + + port = find_port_by_vtermno(vtermno); + if (!port) + return 0; + + if (unlikely(early_put_chars)) + return early_put_chars(vtermno, buf, count); + + return send_buf(port, (void *)buf, count); } /* - * virtio console configuration. This supports: - * - console resize + * get_chars() is the callback from the hvc_console infrastructure + * when an interrupt is received. + * + * We call out to fill_readbuf that gets us the required data from the + * buffers that are queued up. */ -static void virtcons_apply_config(struct virtio_device *dev) +static int get_chars(u32 vtermno, char *buf, int count) { + struct port *port; + + port = find_port_by_vtermno(vtermno); + if (!port) + return 0; + + /* If we don't have an input queue yet, we can't get input. */ + BUG_ON(!port->in_vq); + + return fill_readbuf(port, buf, count, false); +} + +static void resize_console(struct port *port) +{ + struct virtio_device *vdev; struct winsize ws; - if (virtio_has_feature(dev, VIRTIO_CONSOLE_F_SIZE)) { - dev->config->get(dev, - offsetof(struct virtio_console_config, cols), - &ws.ws_col, sizeof(u16)); - dev->config->get(dev, - offsetof(struct virtio_console_config, rows), - &ws.ws_row, sizeof(u16)); - hvc_resize(hvc, ws); + vdev = port->portdev->vdev; + if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_SIZE)) { + vdev->config->get(vdev, + offsetof(struct virtio_console_config, cols), + &ws.ws_col, sizeof(u16)); + vdev->config->get(vdev, + offsetof(struct virtio_console_config, rows), + &ws.ws_row, sizeof(u16)); + hvc_resize(port->cons.hvc, ws); } } -/* - * we support only one console, the hvc struct is a global var - * We set the configuration at this point, since we now have a tty - */ +/* We set the configuration at this point, since we now have a tty */ static int notifier_add_vio(struct hvc_struct *hp, int data) { + struct port *port; + + port = find_port_by_vtermno(hp->vtermno); + if (!port) + return -EINVAL; + hp->irq_requested = 1; - virtcons_apply_config(vdev); + resize_console(port); return 0; } @@ -173,79 +713,797 @@ static void notifier_del_vio(struct hvc_struct *hp, int data) hp->irq_requested = 0; } -static void hvc_handle_input(struct virtqueue *vq) +/* The operations for console ports. */ +static const struct hv_ops hv_ops = { + .get_chars = get_chars, + .put_chars = put_chars, + .notifier_add = notifier_add_vio, + .notifier_del = notifier_del_vio, + .notifier_hangup = notifier_del_vio, +}; + +/* + * Console drivers are initialized very early so boot messages can go + * out, so we do things slightly differently from the generic virtio + * initialization of the net and block drivers. + * + * At this stage, the console is output-only. It's too early to set + * up a virtqueue, so we let the drivers do some boutique early-output + * thing. + */ +int __init virtio_cons_early_init(int (*put_chars)(u32, const char *, int)) { - if (hvc_poll(hvc)) + early_put_chars = put_chars; + return hvc_instantiate(0, 0, &hv_ops); +} + +int init_port_console(struct port *port) +{ + int ret; + + /* + * The Host's telling us this port is a console port. Hook it + * up with an hvc console. + * + * To set up and manage our virtual console, we call + * hvc_alloc(). + * + * The first argument of hvc_alloc() is the virtual console + * number. The second argument is the parameter for the + * notification mechanism (like irq number). We currently + * leave this as zero, virtqueues have implicit notifications. + * + * The third argument is a "struct hv_ops" containing the + * put_chars() get_chars(), notifier_add() and notifier_del() + * pointers. The final argument is the output buffer size: we + * can do any size, so we put PAGE_SIZE here. + */ + port->cons.vtermno = pdrvdata.next_vtermno; + + port->cons.hvc = hvc_alloc(port->cons.vtermno, 0, &hv_ops, PAGE_SIZE); + if (IS_ERR(port->cons.hvc)) { + ret = PTR_ERR(port->cons.hvc); + dev_err(port->dev, + "error %d allocating hvc for port\n", ret); + port->cons.hvc = NULL; + return ret; + } + spin_lock_irq(&pdrvdata_lock); + pdrvdata.next_vtermno++; + list_add_tail(&port->cons.list, &pdrvdata.consoles); + spin_unlock_irq(&pdrvdata_lock); + port->guest_connected = true; + + /* Notify host of port being opened */ + send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 1); + + return 0; +} + +static ssize_t show_port_name(struct device *dev, + struct device_attribute *attr, char *buffer) +{ + struct port *port; + + port = dev_get_drvdata(dev); + + return sprintf(buffer, "%s\n", port->name); +} + +static DEVICE_ATTR(name, S_IRUGO, show_port_name, NULL); + +static struct attribute *port_sysfs_entries[] = { + &dev_attr_name.attr, + NULL +}; + +static struct attribute_group port_attribute_group = { + .name = NULL, /* put in device directory */ + .attrs = port_sysfs_entries, +}; + +static int debugfs_open(struct inode *inode, struct file *filp) +{ + filp->private_data = inode->i_private; + return 0; +} + +static ssize_t debugfs_read(struct file *filp, char __user *ubuf, + size_t count, loff_t *offp) +{ + struct port *port; + char *buf; + ssize_t ret, out_offset, out_count; + + out_count = 1024; + buf = kmalloc(out_count, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + port = filp->private_data; + out_offset = 0; + out_offset += snprintf(buf + out_offset, out_count, + "name: %s\n", port->name ? port->name : ""); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "guest_connected: %d\n", port->guest_connected); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "host_connected: %d\n", port->host_connected); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "is_console: %s\n", + is_console_port(port) ? "yes" : "no"); + out_offset += snprintf(buf + out_offset, out_count - out_offset, + "console_vtermno: %u\n", port->cons.vtermno); + + ret = simple_read_from_buffer(ubuf, count, offp, buf, out_offset); + kfree(buf); + return ret; +} + +static const struct file_operations port_debugfs_ops = { + .owner = THIS_MODULE, + .open = debugfs_open, + .read = debugfs_read, +}; + +/* Remove all port-specific data. */ +static int remove_port(struct port *port) +{ + struct port_buffer *buf; + + spin_lock_irq(&port->portdev->ports_lock); + list_del(&port->list); + spin_unlock_irq(&port->portdev->ports_lock); + + if (is_console_port(port)) { + spin_lock_irq(&pdrvdata_lock); + list_del(&port->cons.list); + spin_unlock_irq(&pdrvdata_lock); + hvc_remove(port->cons.hvc); + } + if (port->guest_connected) + send_control_msg(port, VIRTIO_CONSOLE_PORT_OPEN, 0); + + sysfs_remove_group(&port->dev->kobj, &port_attribute_group); + device_destroy(pdrvdata.class, port->dev->devt); + cdev_del(&port->cdev); + + /* Remove unused data this port might have received. */ + discard_port_data(port); + + /* Remove buffers we queued up for the Host to send us data in. */ + while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq))) + free_buf(buf); + + kfree(port->name); + + debugfs_remove(port->debugfs_file); + + kfree(port); + return 0; +} + +/* Any private messages that the Host and Guest want to share */ +static void handle_control_message(struct ports_device *portdev, + struct port_buffer *buf) +{ + struct virtio_console_control *cpkt; + struct port *port; + size_t name_size; + int err; + + cpkt = (struct virtio_console_control *)(buf->buf + buf->offset); + + port = find_port_by_id(portdev, cpkt->id); + if (!port) { + /* No valid header at start of buffer. Drop it. */ + dev_dbg(&portdev->vdev->dev, + "Invalid index %u in control packet\n", cpkt->id); + return; + } + + switch (cpkt->event) { + case VIRTIO_CONSOLE_CONSOLE_PORT: + if (!cpkt->value) + break; + if (is_console_port(port)) + break; + + init_port_console(port); + /* + * Could remove the port here in case init fails - but + * have to notify the host first. + */ + break; + case VIRTIO_CONSOLE_RESIZE: + if (!is_console_port(port)) + break; + port->cons.hvc->irq_requested = 1; + resize_console(port); + break; + case VIRTIO_CONSOLE_PORT_OPEN: + port->host_connected = cpkt->value; + wake_up_interruptible(&port->waitqueue); + break; + case VIRTIO_CONSOLE_PORT_NAME: + /* + * Skip the size of the header and the cpkt to get the size + * of the name that was sent + */ + name_size = buf->len - buf->offset - sizeof(*cpkt) + 1; + + port->name = kmalloc(name_size, GFP_KERNEL); + if (!port->name) { + dev_err(port->dev, + "Not enough space to store port name\n"); + break; + } + strncpy(port->name, buf->buf + buf->offset + sizeof(*cpkt), + name_size - 1); + port->name[name_size - 1] = 0; + + /* + * Since we only have one sysfs attribute, 'name', + * create it only if we have a name for the port. + */ + err = sysfs_create_group(&port->dev->kobj, + &port_attribute_group); + if (err) + dev_err(port->dev, + "Error %d creating sysfs device attributes\n", + err); + + break; + case VIRTIO_CONSOLE_PORT_REMOVE: + /* + * Hot unplug the port. We don't decrement nr_ports + * since we don't want to deal with extra complexities + * of using the lowest-available port id: We can just + * pick up the nr_ports number as the id and not have + * userspace send it to us. This helps us in two + * ways: + * + * - We don't need to have a 'port_id' field in the + * config space when a port is hot-added. This is a + * good thing as we might queue up multiple hotplug + * requests issued in our workqueue. + * + * - Another way to deal with this would have been to + * use a bitmap of the active ports and select the + * lowest non-active port from that map. That + * bloats the already tight config space and we + * would end up artificially limiting the + * max. number of ports to sizeof(bitmap). Right + * now we can support 2^32 ports (as the port id is + * stored in a u32 type). + * + */ + remove_port(port); + break; + } +} + +static void control_work_handler(struct work_struct *work) +{ + struct ports_device *portdev; + struct virtqueue *vq; + struct port_buffer *buf; + unsigned int len; + + portdev = container_of(work, struct ports_device, control_work); + vq = portdev->c_ivq; + + spin_lock(&portdev->cvq_lock); + while ((buf = vq->vq_ops->get_buf(vq, &len))) { + spin_unlock(&portdev->cvq_lock); + + buf->len = len; + buf->offset = 0; + + handle_control_message(portdev, buf); + + spin_lock(&portdev->cvq_lock); + if (add_inbuf(portdev->c_ivq, buf) < 0) { + dev_warn(&portdev->vdev->dev, + "Error adding buffer to queue\n"); + free_buf(buf); + } + } + spin_unlock(&portdev->cvq_lock); +} + +static void in_intr(struct virtqueue *vq) +{ + struct port *port; + unsigned long flags; + + port = find_port_by_vq(vq->vdev->priv, vq); + if (!port) + return; + + spin_lock_irqsave(&port->inbuf_lock, flags); + if (!port->inbuf) + port->inbuf = get_inbuf(port); + + /* + * Don't queue up data when port is closed. This condition + * can be reached when a console port is not yet connected (no + * tty is spawned) and the host sends out data to console + * ports. For generic serial ports, the host won't + * (shouldn't) send data till the guest is connected. + */ + if (!port->guest_connected) + discard_port_data(port); + + spin_unlock_irqrestore(&port->inbuf_lock, flags); + + wake_up_interruptible(&port->waitqueue); + + if (is_console_port(port) && hvc_poll(port->cons.hvc)) hvc_kick(); } -/*D:370 Once we're further in boot, we get probed like any other virtio device. - * At this stage we set up the output virtqueue. - * - * To set up and manage our virtual console, we call hvc_alloc(). Since we - * never remove the console device we never need this pointer again. +static void control_intr(struct virtqueue *vq) +{ + struct ports_device *portdev; + + portdev = vq->vdev->priv; + schedule_work(&portdev->control_work); +} + +static void config_intr(struct virtio_device *vdev) +{ + struct ports_device *portdev; + + portdev = vdev->priv; + if (use_multiport(portdev)) { + /* Handle port hot-add */ + schedule_work(&portdev->config_work); + } + /* + * We'll use this way of resizing only for legacy support. + * For newer userspace (VIRTIO_CONSOLE_F_MULTPORT+), use + * control messages to indicate console size changes so that + * it can be done per-port + */ + resize_console(find_port_by_id(portdev, 0)); +} + +static unsigned int fill_queue(struct virtqueue *vq, spinlock_t *lock) +{ + struct port_buffer *buf; + unsigned int ret; + int err; + + ret = 0; + do { + buf = alloc_buf(PAGE_SIZE); + if (!buf) + break; + + spin_lock_irq(lock); + err = add_inbuf(vq, buf); + if (err < 0) { + spin_unlock_irq(lock); + free_buf(buf); + break; + } + ret++; + spin_unlock_irq(lock); + } while (err > 0); + + return ret; +} + +static int add_port(struct ports_device *portdev, u32 id) +{ + char debugfs_name[16]; + struct port *port; + struct port_buffer *buf; + dev_t devt; + int err; + + port = kmalloc(sizeof(*port), GFP_KERNEL); + if (!port) { + err = -ENOMEM; + goto fail; + } + + port->portdev = portdev; + port->id = id; + + port->name = NULL; + port->inbuf = NULL; + port->cons.hvc = NULL; + + port->host_connected = port->guest_connected = false; + + port->in_vq = portdev->in_vqs[port->id]; + port->out_vq = portdev->out_vqs[port->id]; + + cdev_init(&port->cdev, &port_fops); + + devt = MKDEV(portdev->chr_major, id); + err = cdev_add(&port->cdev, devt, 1); + if (err < 0) { + dev_err(&port->portdev->vdev->dev, + "Error %d adding cdev for port %u\n", err, id); + goto free_port; + } + port->dev = device_create(pdrvdata.class, &port->portdev->vdev->dev, + devt, port, "vport%up%u", + port->portdev->drv_index, id); + if (IS_ERR(port->dev)) { + err = PTR_ERR(port->dev); + dev_err(&port->portdev->vdev->dev, + "Error %d creating device for port %u\n", + err, id); + goto free_cdev; + } + + spin_lock_init(&port->inbuf_lock); + init_waitqueue_head(&port->waitqueue); + + /* Fill the in_vq with buffers so the host can send us data. */ + err = fill_queue(port->in_vq, &port->inbuf_lock); + if (!err) { + dev_err(port->dev, "Error allocating inbufs\n"); + err = -ENOMEM; + goto free_device; + } + + /* + * If we're not using multiport support, this has to be a console port + */ + if (!use_multiport(port->portdev)) { + err = init_port_console(port); + if (err) + goto free_inbufs; + } + + spin_lock_irq(&portdev->ports_lock); + list_add_tail(&port->list, &port->portdev->ports); + spin_unlock_irq(&portdev->ports_lock); + + /* + * Tell the Host we're set so that it can send us various + * configuration parameters for this port (eg, port name, + * caching, whether this is a console port, etc.) + */ + send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); + + if (pdrvdata.debugfs_dir) { + /* + * Finally, create the debugfs file that we can use to + * inspect a port's state at any time + */ + sprintf(debugfs_name, "vport%up%u", + port->portdev->drv_index, id); + port->debugfs_file = debugfs_create_file(debugfs_name, 0444, + pdrvdata.debugfs_dir, + port, + &port_debugfs_ops); + } + return 0; + +free_inbufs: + while ((buf = port->in_vq->vq_ops->detach_unused_buf(port->in_vq))) + free_buf(buf); +free_device: + device_destroy(pdrvdata.class, port->dev->devt); +free_cdev: + cdev_del(&port->cdev); +free_port: + kfree(port); +fail: + return err; +} + +/* + * The workhandler for config-space updates. * - * Finally we put our input buffer in the input queue, ready to receive. */ -static int __devinit virtcons_probe(struct virtio_device *dev) + * This is called when ports are hot-added. + */ +static void config_work_handler(struct work_struct *work) +{ + struct virtio_console_config virtconconf; + struct ports_device *portdev; + struct virtio_device *vdev; + int err; + + portdev = container_of(work, struct ports_device, config_work); + + vdev = portdev->vdev; + vdev->config->get(vdev, + offsetof(struct virtio_console_config, nr_ports), + &virtconconf.nr_ports, + sizeof(virtconconf.nr_ports)); + + if (portdev->config.nr_ports == virtconconf.nr_ports) { + /* + * Port 0 got hot-added. Since we already did all the + * other initialisation for it, just tell the Host + * that the port is ready if we find the port. In + * case the port was hot-removed earlier, we call + * add_port to add the port. + */ + struct port *port; + + port = find_port_by_id(portdev, 0); + if (!port) + add_port(portdev, 0); + else + send_control_msg(port, VIRTIO_CONSOLE_PORT_READY, 1); + return; + } + if (virtconconf.nr_ports > portdev->config.max_nr_ports) { + dev_warn(&vdev->dev, + "More ports specified (%u) than allowed (%u)", + portdev->config.nr_ports + 1, + portdev->config.max_nr_ports); + return; + } + if (virtconconf.nr_ports < portdev->config.nr_ports) + return; + + /* Hot-add ports */ + while (virtconconf.nr_ports - portdev->config.nr_ports) { + err = add_port(portdev, portdev->config.nr_ports); + if (err) + break; + portdev->config.nr_ports++; + } +} + +static int init_vqs(struct ports_device *portdev) { - vq_callback_t *callbacks[] = { hvc_handle_input, NULL}; - const char *names[] = { "input", "output" }; - struct virtqueue *vqs[2]; + vq_callback_t **io_callbacks; + char **io_names; + struct virtqueue **vqs; + u32 i, j, nr_ports, nr_queues; int err; - vdev = dev; + nr_ports = portdev->config.max_nr_ports; + nr_queues = use_multiport(portdev) ? (nr_ports + 1) * 2 : 2; - /* This is the scratch page we use to receive console input */ - inbuf = kmalloc(PAGE_SIZE, GFP_KERNEL); - if (!inbuf) { + vqs = kmalloc(nr_queues * sizeof(struct virtqueue *), GFP_KERNEL); + if (!vqs) { err = -ENOMEM; goto fail; } + io_callbacks = kmalloc(nr_queues * sizeof(vq_callback_t *), GFP_KERNEL); + if (!io_callbacks) { + err = -ENOMEM; + goto free_vqs; + } + io_names = kmalloc(nr_queues * sizeof(char *), GFP_KERNEL); + if (!io_names) { + err = -ENOMEM; + goto free_callbacks; + } + portdev->in_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), + GFP_KERNEL); + if (!portdev->in_vqs) { + err = -ENOMEM; + goto free_names; + } + portdev->out_vqs = kmalloc(nr_ports * sizeof(struct virtqueue *), + GFP_KERNEL); + if (!portdev->out_vqs) { + err = -ENOMEM; + goto free_invqs; + } + + /* + * For backward compat (newer host but older guest), the host + * spawns a console port first and also inits the vqs for port + * 0 before others. + */ + j = 0; + io_callbacks[j] = in_intr; + io_callbacks[j + 1] = NULL; + io_names[j] = "input"; + io_names[j + 1] = "output"; + j += 2; + if (use_multiport(portdev)) { + io_callbacks[j] = control_intr; + io_callbacks[j + 1] = NULL; + io_names[j] = "control-i"; + io_names[j + 1] = "control-o"; + + for (i = 1; i < nr_ports; i++) { + j += 2; + io_callbacks[j] = in_intr; + io_callbacks[j + 1] = NULL; + io_names[j] = "input"; + io_names[j + 1] = "output"; + } + } /* Find the queues. */ - /* FIXME: This is why we want to wean off hvc: we do nothing - * when input comes in. */ - err = vdev->config->find_vqs(vdev, 2, vqs, callbacks, names); + err = portdev->vdev->config->find_vqs(portdev->vdev, nr_queues, vqs, + io_callbacks, + (const char **)io_names); if (err) + goto free_outvqs; + + j = 0; + portdev->in_vqs[0] = vqs[0]; + portdev->out_vqs[0] = vqs[1]; + j += 2; + if (use_multiport(portdev)) { + portdev->c_ivq = vqs[j]; + portdev->c_ovq = vqs[j + 1]; + + for (i = 1; i < nr_ports; i++) { + j += 2; + portdev->in_vqs[i] = vqs[j]; + portdev->out_vqs[i] = vqs[j + 1]; + } + } + kfree(io_callbacks); + kfree(io_names); + kfree(vqs); + + return 0; + +free_names: + kfree(io_names); +free_callbacks: + kfree(io_callbacks); +free_outvqs: + kfree(portdev->out_vqs); +free_invqs: + kfree(portdev->in_vqs); +free_vqs: + kfree(vqs); +fail: + return err; +} + +static const struct file_operations portdev_fops = { + .owner = THIS_MODULE, +}; + +/* + * Once we're further in boot, we get probed like any other virtio + * device. + * + * If the host also supports multiple console ports, we check the + * config space to see how many ports the host has spawned. We + * initialize each port found. + */ +static int __devinit virtcons_probe(struct virtio_device *vdev) +{ + struct ports_device *portdev; + u32 i; + int err; + bool multiport; + + portdev = kmalloc(sizeof(*portdev), GFP_KERNEL); + if (!portdev) { + err = -ENOMEM; + goto fail; + } + + /* Attach this portdev to this virtio_device, and vice-versa. */ + portdev->vdev = vdev; + vdev->priv = portdev; + + spin_lock_irq(&pdrvdata_lock); + portdev->drv_index = pdrvdata.index++; + spin_unlock_irq(&pdrvdata_lock); + + portdev->chr_major = register_chrdev(0, "virtio-portsdev", + &portdev_fops); + if (portdev->chr_major < 0) { + dev_err(&vdev->dev, + "Error %d registering chrdev for device %u\n", + portdev->chr_major, portdev->drv_index); + err = portdev->chr_major; goto free; + } - in_vq = vqs[0]; - out_vq = vqs[1]; + multiport = false; + portdev->config.nr_ports = 1; + portdev->config.max_nr_ports = 1; + if (virtio_has_feature(vdev, VIRTIO_CONSOLE_F_MULTIPORT)) { + multiport = true; + vdev->features[0] |= 1 << VIRTIO_CONSOLE_F_MULTIPORT; - /* Start using the new console output. */ - virtio_cons.get_chars = get_chars; - virtio_cons.put_chars = put_chars; - virtio_cons.notifier_add = notifier_add_vio; - virtio_cons.notifier_del = notifier_del_vio; - virtio_cons.notifier_hangup = notifier_del_vio; - - /* The first argument of hvc_alloc() is the virtual console number, so - * we use zero. The second argument is the parameter for the - * notification mechanism (like irq number). We currently leave this - * as zero, virtqueues have implicit notifications. - * - * The third argument is a "struct hv_ops" containing the put_chars() - * get_chars(), notifier_add() and notifier_del() pointers. - * The final argument is the output buffer size: we can do any size, - * so we put PAGE_SIZE here. */ - hvc = hvc_alloc(0, 0, &virtio_cons, PAGE_SIZE); - if (IS_ERR(hvc)) { - err = PTR_ERR(hvc); - goto free_vqs; + vdev->config->get(vdev, offsetof(struct virtio_console_config, + nr_ports), + &portdev->config.nr_ports, + sizeof(portdev->config.nr_ports)); + vdev->config->get(vdev, offsetof(struct virtio_console_config, + max_nr_ports), + &portdev->config.max_nr_ports, + sizeof(portdev->config.max_nr_ports)); + if (portdev->config.nr_ports > portdev->config.max_nr_ports) { + dev_warn(&vdev->dev, + "More ports (%u) specified than allowed (%u). Will init %u ports.", + portdev->config.nr_ports, + portdev->config.max_nr_ports, + portdev->config.max_nr_ports); + + portdev->config.nr_ports = portdev->config.max_nr_ports; + } + } + + /* Let the Host know we support multiple ports.*/ + vdev->config->finalize_features(vdev); + + err = init_vqs(portdev); + if (err < 0) { + dev_err(&vdev->dev, "Error %d initializing vqs\n", err); + goto free_chrdev; + } + + spin_lock_init(&portdev->ports_lock); + INIT_LIST_HEAD(&portdev->ports); + + if (multiport) { + spin_lock_init(&portdev->cvq_lock); + INIT_WORK(&portdev->control_work, &control_work_handler); + INIT_WORK(&portdev->config_work, &config_work_handler); + + err = fill_queue(portdev->c_ivq, &portdev->cvq_lock); + if (!err) { + dev_err(&vdev->dev, + "Error allocating buffers for control queue\n"); + err = -ENOMEM; + goto free_vqs; + } } - /* Register the input buffer the first time. */ - add_inbuf(); + for (i = 0; i < portdev->config.nr_ports; i++) + add_port(portdev, i); + + /* Start using the new console output. */ + early_put_chars = NULL; return 0; free_vqs: vdev->config->del_vqs(vdev); + kfree(portdev->in_vqs); + kfree(portdev->out_vqs); +free_chrdev: + unregister_chrdev(portdev->chr_major, "virtio-portsdev"); free: - kfree(inbuf); + kfree(portdev); fail: return err; } +static void virtcons_remove(struct virtio_device *vdev) +{ + struct ports_device *portdev; + struct port *port, *port2; + struct port_buffer *buf; + unsigned int len; + + portdev = vdev->priv; + + cancel_work_sync(&portdev->control_work); + cancel_work_sync(&portdev->config_work); + + list_for_each_entry_safe(port, port2, &portdev->ports, list) + remove_port(port); + + unregister_chrdev(portdev->chr_major, "virtio-portsdev"); + + while ((buf = portdev->c_ivq->vq_ops->get_buf(portdev->c_ivq, &len))) + free_buf(buf); + + while ((buf = portdev->c_ivq->vq_ops->detach_unused_buf(portdev->c_ivq))) + free_buf(buf); + + vdev->config->del_vqs(vdev); + kfree(portdev->in_vqs); + kfree(portdev->out_vqs); + + kfree(portdev); +} + static struct virtio_device_id id_table[] = { { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID }, { 0 }, @@ -253,6 +1511,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_CONSOLE_F_SIZE, + VIRTIO_CONSOLE_F_MULTIPORT, }; static struct virtio_driver virtio_console = { @@ -262,14 +1521,41 @@ static struct virtio_driver virtio_console = { .driver.owner = THIS_MODULE, .id_table = id_table, .probe = virtcons_probe, - .config_changed = virtcons_apply_config, + .remove = virtcons_remove, + .config_changed = config_intr, }; static int __init init(void) { + int err; + + pdrvdata.class = class_create(THIS_MODULE, "virtio-ports"); + if (IS_ERR(pdrvdata.class)) { + err = PTR_ERR(pdrvdata.class); + pr_err("Error %d creating virtio-ports class\n", err); + return err; + } + + pdrvdata.debugfs_dir = debugfs_create_dir("virtio-ports", NULL); + if (!pdrvdata.debugfs_dir) { + pr_warning("Error %ld creating debugfs dir for virtio-ports\n", + PTR_ERR(pdrvdata.debugfs_dir)); + } + INIT_LIST_HEAD(&pdrvdata.consoles); + return register_virtio_driver(&virtio_console); } + +static void __exit fini(void) +{ + unregister_virtio_driver(&virtio_console); + + class_destroy(pdrvdata.class); + if (pdrvdata.debugfs_dir) + debugfs_remove_recursive(pdrvdata.debugfs_dir); +} module_init(init); +module_exit(fini); MODULE_DEVICE_TABLE(virtio, id_table); MODULE_DESCRIPTION("Virtio console driver"); diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c index 994e1a58b98..8b24729fec8 100644 --- a/drivers/char/vme_scc.c +++ b/drivers/char/vme_scc.c @@ -136,7 +136,7 @@ static const struct tty_port_operations scc_port_ops = { * vme_scc_init() and support functions *---------------------------------------------------------------------------*/ -static int scc_init_drivers(void) +static int __init scc_init_drivers(void) { int error; @@ -172,7 +172,7 @@ static int scc_init_drivers(void) /* ports[] array is indexed by line no (i.e. [0] for ttyS0, [1] for ttyS1). */ -static void scc_init_portstructs(void) +static void __init scc_init_portstructs(void) { struct scc_port *port; int i; @@ -195,7 +195,7 @@ static void scc_init_portstructs(void) #ifdef CONFIG_MVME147_SCC -static int mvme147_scc_init(void) +static int __init mvme147_scc_init(void) { struct scc_port *port; int error; @@ -298,7 +298,7 @@ fail: #ifdef CONFIG_MVME162_SCC -static int mvme162_scc_init(void) +static int __init mvme162_scc_init(void) { struct scc_port *port; int error; @@ -404,7 +404,7 @@ fail: #ifdef CONFIG_BVME6000_SCC -static int bvme6000_scc_init(void) +static int __init bvme6000_scc_init(void) { struct scc_port *port; int error; @@ -503,7 +503,7 @@ fail_free_b_rx: #endif -static int vme_scc_init(void) +static int __init vme_scc_init(void) { int res = -ENODEV; |