diff options
Diffstat (limited to 'drivers/clk/keystone/pll.c')
-rw-r--r-- | drivers/clk/keystone/pll.c | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/drivers/clk/keystone/pll.c b/drivers/clk/keystone/pll.c new file mode 100644 index 00000000000..47a1bd9f172 --- /dev/null +++ b/drivers/clk/keystone/pll.c @@ -0,0 +1,305 @@ +/* + * PLL clock driver for Keystone devices + * + * Copyright (C) 2013 Texas Instruments Inc. + * Murali Karicheri <m-karicheri2@ti.com> + * Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/of_address.h> +#include <linux/of.h> +#include <linux/module.h> + +#define PLLM_LOW_MASK 0x3f +#define PLLM_HIGH_MASK 0x7ffc0 +#define MAIN_PLLM_HIGH_MASK 0x7f000 +#define PLLM_HIGH_SHIFT 6 +#define PLLD_MASK 0x3f + +/** + * struct clk_pll_data - pll data structure + * @has_pllctrl: If set to non zero, lower 6 bits of multiplier is in pllm + * register of pll controller, else it is in the pll_ctrl0((bit 11-6) + * @phy_pllm: Physical address of PLLM in pll controller. Used when + * has_pllctrl is non zero. + * @phy_pll_ctl0: Physical address of PLL ctrl0. This could be that of + * Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL + * or PA PLL available on keystone2. These PLLs are controlled by + * this register. Main PLL is controlled by a PLL controller. + * @pllm: PLL register map address + * @pll_ctl0: PLL controller map address + * @pllm_lower_mask: multiplier lower mask + * @pllm_upper_mask: multiplier upper mask + * @pllm_upper_shift: multiplier upper shift + * @plld_mask: divider mask + * @postdiv: Post divider + */ +struct clk_pll_data { + bool has_pllctrl; + u32 phy_pllm; + u32 phy_pll_ctl0; + void __iomem *pllm; + void __iomem *pll_ctl0; + u32 pllm_lower_mask; + u32 pllm_upper_mask; + u32 pllm_upper_shift; + u32 plld_mask; + u32 postdiv; +}; + +/** + * struct clk_pll - Main pll clock + * @hw: clk_hw for the pll + * @pll_data: PLL driver specific data + */ +struct clk_pll { + struct clk_hw hw; + struct clk_pll_data *pll_data; +}; + +#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw) + +static unsigned long clk_pllclk_recalc(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_pll *pll = to_clk_pll(hw); + struct clk_pll_data *pll_data = pll->pll_data; + unsigned long rate = parent_rate; + u32 mult = 0, prediv, postdiv, val; + + /* + * get bits 0-5 of multiplier from pllctrl PLLM register + * if has_pllctrl is non zero + */ + if (pll_data->has_pllctrl) { + val = readl(pll_data->pllm); + mult = (val & pll_data->pllm_lower_mask); + } + + /* bit6-12 of PLLM is in Main PLL control register */ + val = readl(pll_data->pll_ctl0); + mult |= ((val & pll_data->pllm_upper_mask) + >> pll_data->pllm_upper_shift); + prediv = (val & pll_data->plld_mask); + postdiv = pll_data->postdiv; + + rate /= (prediv + 1); + rate = (rate * (mult + 1)); + rate /= postdiv; + + return rate; +} + +static const struct clk_ops clk_pll_ops = { + .recalc_rate = clk_pllclk_recalc, +}; + +static struct clk *clk_register_pll(struct device *dev, + const char *name, + const char *parent_name, + struct clk_pll_data *pll_data) +{ + struct clk_init_data init; + struct clk_pll *pll; + struct clk *clk; + + pll = kzalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &clk_pll_ops; + init.flags = 0; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + pll->pll_data = pll_data; + pll->hw.init = &init; + + clk = clk_register(NULL, &pll->hw); + if (IS_ERR(clk)) + goto out; + + return clk; +out: + kfree(pll); + return NULL; +} + +/** + * _of_clk_init - PLL initialisation via DT + * @node: device tree node for this clock + * @pllctrl: If true, lower 6 bits of multiplier is in pllm register of + * pll controller, else it is in the control regsiter0(bit 11-6) + */ +static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl) +{ + struct clk_pll_data *pll_data; + const char *parent_name; + struct clk *clk; + int i; + + pll_data = kzalloc(sizeof(*pll_data), GFP_KERNEL); + if (!pll_data) { + pr_err("%s: Out of memory\n", __func__); + return; + } + + parent_name = of_clk_get_parent_name(node, 0); + if (of_property_read_u32(node, "fixed-postdiv", &pll_data->postdiv)) + goto out; + + i = of_property_match_string(node, "reg-names", "control"); + pll_data->pll_ctl0 = of_iomap(node, i); + if (!pll_data->pll_ctl0) { + pr_err("%s: ioremap failed\n", __func__); + goto out; + } + + pll_data->pllm_lower_mask = PLLM_LOW_MASK; + pll_data->pllm_upper_shift = PLLM_HIGH_SHIFT; + pll_data->plld_mask = PLLD_MASK; + pll_data->has_pllctrl = pllctrl; + if (!pll_data->has_pllctrl) { + pll_data->pllm_upper_mask = PLLM_HIGH_MASK; + } else { + pll_data->pllm_upper_mask = MAIN_PLLM_HIGH_MASK; + i = of_property_match_string(node, "reg-names", "multiplier"); + pll_data->pllm = of_iomap(node, i); + if (!pll_data->pllm) { + iounmap(pll_data->pll_ctl0); + goto out; + } + } + + clk = clk_register_pll(NULL, node->name, parent_name, pll_data); + if (clk) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + return; + } + +out: + pr_err("%s: error initializing pll %s\n", __func__, node->name); + kfree(pll_data); +} + +/** + * of_keystone_pll_clk_init - PLL initialisation DT wrapper + * @node: device tree node for this clock + */ +static void __init of_keystone_pll_clk_init(struct device_node *node) +{ + _of_pll_clk_init(node, false); +} +CLK_OF_DECLARE(keystone_pll_clock, "ti,keystone,pll-clock", + of_keystone_pll_clk_init); + +/** + * of_keystone_pll_main_clk_init - Main PLL initialisation DT wrapper + * @node: device tree node for this clock + */ +static void __init of_keystone_main_pll_clk_init(struct device_node *node) +{ + _of_pll_clk_init(node, true); +} +CLK_OF_DECLARE(keystone_main_pll_clock, "ti,keystone,main-pll-clock", + of_keystone_main_pll_clk_init); + +/** + * of_pll_div_clk_init - PLL divider setup function + * @node: device tree node for this clock + */ +static void __init of_pll_div_clk_init(struct device_node *node) +{ + const char *parent_name; + void __iomem *reg; + u32 shift, mask; + struct clk *clk; + const char *clk_name = node->name; + + of_property_read_string(node, "clock-output-names", &clk_name); + reg = of_iomap(node, 0); + if (!reg) { + pr_err("%s: ioremap failed\n", __func__); + return; + } + + parent_name = of_clk_get_parent_name(node, 0); + if (!parent_name) { + pr_err("%s: missing parent clock\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-shift", &shift)) { + pr_err("%s: missing 'shift' property\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-mask", &mask)) { + pr_err("%s: missing 'bit-mask' property\n", __func__); + return; + } + + clk = clk_register_divider(NULL, clk_name, parent_name, 0, reg, shift, + mask, 0, NULL); + if (clk) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + else + pr_err("%s: error registering divider %s\n", __func__, clk_name); +} +CLK_OF_DECLARE(pll_divider_clock, "ti,keystone,pll-divider-clock", of_pll_div_clk_init); + +/** + * of_pll_mux_clk_init - PLL mux setup function + * @node: device tree node for this clock + */ +static void __init of_pll_mux_clk_init(struct device_node *node) +{ + void __iomem *reg; + u32 shift, mask; + struct clk *clk; + const char *parents[2]; + const char *clk_name = node->name; + + of_property_read_string(node, "clock-output-names", &clk_name); + reg = of_iomap(node, 0); + if (!reg) { + pr_err("%s: ioremap failed\n", __func__); + return; + } + + parents[0] = of_clk_get_parent_name(node, 0); + parents[1] = of_clk_get_parent_name(node, 1); + if (!parents[0] || !parents[1]) { + pr_err("%s: missing parent clocks\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-shift", &shift)) { + pr_err("%s: missing 'shift' property\n", __func__); + return; + } + + if (of_property_read_u32(node, "bit-mask", &mask)) { + pr_err("%s: missing 'bit-mask' property\n", __func__); + return; + } + + clk = clk_register_mux(NULL, clk_name, (const char **)&parents, + ARRAY_SIZE(parents) , 0, reg, shift, mask, + 0, NULL); + if (clk) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + else + pr_err("%s: error registering mux %s\n", __func__, clk_name); +} +CLK_OF_DECLARE(pll_mux_clock, "ti,keystone,pll-mux-clock", of_pll_mux_clk_init); |