summaryrefslogtreecommitdiffstats
path: root/drivers/clk/keystone
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/clk/keystone')
-rw-r--r--drivers/clk/keystone/Makefile1
-rw-r--r--drivers/clk/keystone/gate.c264
-rw-r--r--drivers/clk/keystone/pll.c305
3 files changed, 570 insertions, 0 deletions
diff --git a/drivers/clk/keystone/Makefile b/drivers/clk/keystone/Makefile
new file mode 100644
index 00000000000..0477cf63f13
--- /dev/null
+++ b/drivers/clk/keystone/Makefile
@@ -0,0 +1 @@
+obj-y += pll.o gate.o
diff --git a/drivers/clk/keystone/gate.c b/drivers/clk/keystone/gate.c
new file mode 100644
index 00000000000..1f333bcfc22
--- /dev/null
+++ b/drivers/clk/keystone/gate.c
@@ -0,0 +1,264 @@
+/*
+ * Clock driver for Keystone 2 based devices
+ *
+ * Copyright (C) 2013 Texas Instruments.
+ * Murali Karicheri <m-karicheri2@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/module.h>
+
+/* PSC register offsets */
+#define PTCMD 0x120
+#define PTSTAT 0x128
+#define PDSTAT 0x200
+#define PDCTL 0x300
+#define MDSTAT 0x800
+#define MDCTL 0xa00
+
+/* PSC module states */
+#define PSC_STATE_SWRSTDISABLE 0
+#define PSC_STATE_SYNCRST 1
+#define PSC_STATE_DISABLE 2
+#define PSC_STATE_ENABLE 3
+
+#define MDSTAT_STATE_MASK 0x3f
+#define MDSTAT_MCKOUT BIT(12)
+#define PDSTAT_STATE_MASK 0x1f
+#define MDCTL_FORCE BIT(31)
+#define MDCTL_LRESET BIT(8)
+#define PDCTL_NEXT BIT(0)
+
+/* Maximum timeout to bail out state transition for module */
+#define STATE_TRANS_MAX_COUNT 0xffff
+
+static void __iomem *domain_transition_base;
+
+/**
+ * struct clk_psc_data - PSC data
+ * @control_base: Base address for a PSC control
+ * @domain_base: Base address for a PSC domain
+ * @domain_id: PSC domain id number
+ */
+struct clk_psc_data {
+ void __iomem *control_base;
+ void __iomem *domain_base;
+ u32 domain_id;
+};
+
+/**
+ * struct clk_psc - PSC clock structure
+ * @hw: clk_hw for the psc
+ * @psc_data: PSC driver specific data
+ * @lock: Spinlock used by the driver
+ */
+struct clk_psc {
+ struct clk_hw hw;
+ struct clk_psc_data *psc_data;
+ spinlock_t *lock;
+};
+
+static DEFINE_SPINLOCK(psc_lock);
+
+#define to_clk_psc(_hw) container_of(_hw, struct clk_psc, hw)
+
+static void psc_config(void __iomem *control_base, void __iomem *domain_base,
+ u32 next_state, u32 domain_id)
+{
+ u32 ptcmd, pdstat, pdctl, mdstat, mdctl, ptstat;
+ u32 count = STATE_TRANS_MAX_COUNT;
+
+ mdctl = readl(control_base + MDCTL);
+ mdctl &= ~MDSTAT_STATE_MASK;
+ mdctl |= next_state;
+ /* For disable, we always put the module in local reset */
+ if (next_state == PSC_STATE_DISABLE)
+ mdctl &= ~MDCTL_LRESET;
+ writel(mdctl, control_base + MDCTL);
+
+ pdstat = readl(domain_base + PDSTAT);
+ if (!(pdstat & PDSTAT_STATE_MASK)) {
+ pdctl = readl(domain_base + PDCTL);
+ pdctl |= PDCTL_NEXT;
+ writel(pdctl, domain_base + PDCTL);
+ }
+
+ ptcmd = 1 << domain_id;
+ writel(ptcmd, domain_transition_base + PTCMD);
+ do {
+ ptstat = readl(domain_transition_base + PTSTAT);
+ } while (((ptstat >> domain_id) & 1) && count--);
+
+ count = STATE_TRANS_MAX_COUNT;
+ do {
+ mdstat = readl(control_base + MDSTAT);
+ } while (!((mdstat & MDSTAT_STATE_MASK) == next_state) && count--);
+}
+
+static int keystone_clk_is_enabled(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ struct clk_psc_data *data = psc->psc_data;
+ u32 mdstat = readl(data->control_base + MDSTAT);
+
+ return (mdstat & MDSTAT_MCKOUT) ? 1 : 0;
+}
+
+static int keystone_clk_enable(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ struct clk_psc_data *data = psc->psc_data;
+ unsigned long flags = 0;
+
+ if (psc->lock)
+ spin_lock_irqsave(psc->lock, flags);
+
+ psc_config(data->control_base, data->domain_base,
+ PSC_STATE_ENABLE, data->domain_id);
+
+ if (psc->lock)
+ spin_unlock_irqrestore(psc->lock, flags);
+
+ return 0;
+}
+
+static void keystone_clk_disable(struct clk_hw *hw)
+{
+ struct clk_psc *psc = to_clk_psc(hw);
+ struct clk_psc_data *data = psc->psc_data;
+ unsigned long flags = 0;
+
+ if (psc->lock)
+ spin_lock_irqsave(psc->lock, flags);
+
+ psc_config(data->control_base, data->domain_base,
+ PSC_STATE_DISABLE, data->domain_id);
+
+ if (psc->lock)
+ spin_unlock_irqrestore(psc->lock, flags);
+}
+
+static const struct clk_ops clk_psc_ops = {
+ .enable = keystone_clk_enable,
+ .disable = keystone_clk_disable,
+ .is_enabled = keystone_clk_is_enabled,
+};
+
+/**
+ * clk_register_psc - register psc clock
+ * @dev: device that is registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @psc_data: platform data to configure this clock
+ * @lock: spinlock used by this clock
+ */
+static struct clk *clk_register_psc(struct device *dev,
+ const char *name,
+ const char *parent_name,
+ struct clk_psc_data *psc_data,
+ spinlock_t *lock)
+{
+ struct clk_init_data init;
+ struct clk_psc *psc;
+ struct clk *clk;
+
+ psc = kzalloc(sizeof(*psc), GFP_KERNEL);
+ if (!psc)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_psc_ops;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ psc->psc_data = psc_data;
+ psc->lock = lock;
+ psc->hw.init = &init;
+
+ clk = clk_register(NULL, &psc->hw);
+ if (IS_ERR(clk))
+ kfree(psc);
+
+ return clk;
+}
+
+/**
+ * of_psc_clk_init - initialize psc clock through DT
+ * @node: device tree node for this clock
+ * @lock: spinlock used by this clock
+ */
+static void __init of_psc_clk_init(struct device_node *node, spinlock_t *lock)
+{
+ const char *clk_name = node->name;
+ const char *parent_name;
+ struct clk_psc_data *data;
+ struct clk *clk;
+ int i;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data) {
+ pr_err("%s: Out of memory\n", __func__);
+ return;
+ }
+
+ i = of_property_match_string(node, "reg-names", "control");
+ data->control_base = of_iomap(node, i);
+ if (!data->control_base) {
+ pr_err("%s: control ioremap failed\n", __func__);
+ goto out;
+ }
+
+ i = of_property_match_string(node, "reg-names", "domain");
+ data->domain_base = of_iomap(node, i);
+ if (!data->domain_base) {
+ pr_err("%s: domain ioremap failed\n", __func__);
+ iounmap(data->control_base);
+ goto out;
+ }
+
+ of_property_read_u32(node, "domain-id", &data->domain_id);
+
+ /* Domain transition registers at fixed address space of domain_id 0 */
+ if (!domain_transition_base && !data->domain_id)
+ domain_transition_base = data->domain_base;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ parent_name = of_clk_get_parent_name(node, 0);
+ if (!parent_name) {
+ pr_err("%s: Parent clock not found\n", __func__);
+ goto out;
+ }
+
+ clk = clk_register_psc(NULL, clk_name, parent_name, data, lock);
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ return;
+ }
+
+ pr_err("%s: error registering clk %s\n", __func__, node->name);
+out:
+ kfree(data);
+ return;
+}
+
+/**
+ * of_keystone_psc_clk_init - initialize psc clock through DT
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_psc_clk_init(struct device_node *node)
+{
+ of_psc_clk_init(node, &psc_lock);
+}
+CLK_OF_DECLARE(keystone_gate_clk, "ti,keystone,psc-clock",
+ of_keystone_psc_clk_init);
diff --git a/drivers/clk/keystone/pll.c b/drivers/clk/keystone/pll.c
new file mode 100644
index 00000000000..47a1bd9f172
--- /dev/null
+++ b/drivers/clk/keystone/pll.c
@@ -0,0 +1,305 @@
+/*
+ * PLL clock driver for Keystone devices
+ *
+ * Copyright (C) 2013 Texas Instruments Inc.
+ * Murali Karicheri <m-karicheri2@ti.com>
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/module.h>
+
+#define PLLM_LOW_MASK 0x3f
+#define PLLM_HIGH_MASK 0x7ffc0
+#define MAIN_PLLM_HIGH_MASK 0x7f000
+#define PLLM_HIGH_SHIFT 6
+#define PLLD_MASK 0x3f
+
+/**
+ * struct clk_pll_data - pll data structure
+ * @has_pllctrl: If set to non zero, lower 6 bits of multiplier is in pllm
+ * register of pll controller, else it is in the pll_ctrl0((bit 11-6)
+ * @phy_pllm: Physical address of PLLM in pll controller. Used when
+ * has_pllctrl is non zero.
+ * @phy_pll_ctl0: Physical address of PLL ctrl0. This could be that of
+ * Main PLL or any other PLLs in the device such as ARM PLL, DDR PLL
+ * or PA PLL available on keystone2. These PLLs are controlled by
+ * this register. Main PLL is controlled by a PLL controller.
+ * @pllm: PLL register map address
+ * @pll_ctl0: PLL controller map address
+ * @pllm_lower_mask: multiplier lower mask
+ * @pllm_upper_mask: multiplier upper mask
+ * @pllm_upper_shift: multiplier upper shift
+ * @plld_mask: divider mask
+ * @postdiv: Post divider
+ */
+struct clk_pll_data {
+ bool has_pllctrl;
+ u32 phy_pllm;
+ u32 phy_pll_ctl0;
+ void __iomem *pllm;
+ void __iomem *pll_ctl0;
+ u32 pllm_lower_mask;
+ u32 pllm_upper_mask;
+ u32 pllm_upper_shift;
+ u32 plld_mask;
+ u32 postdiv;
+};
+
+/**
+ * struct clk_pll - Main pll clock
+ * @hw: clk_hw for the pll
+ * @pll_data: PLL driver specific data
+ */
+struct clk_pll {
+ struct clk_hw hw;
+ struct clk_pll_data *pll_data;
+};
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+static unsigned long clk_pllclk_recalc(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pll *pll = to_clk_pll(hw);
+ struct clk_pll_data *pll_data = pll->pll_data;
+ unsigned long rate = parent_rate;
+ u32 mult = 0, prediv, postdiv, val;
+
+ /*
+ * get bits 0-5 of multiplier from pllctrl PLLM register
+ * if has_pllctrl is non zero
+ */
+ if (pll_data->has_pllctrl) {
+ val = readl(pll_data->pllm);
+ mult = (val & pll_data->pllm_lower_mask);
+ }
+
+ /* bit6-12 of PLLM is in Main PLL control register */
+ val = readl(pll_data->pll_ctl0);
+ mult |= ((val & pll_data->pllm_upper_mask)
+ >> pll_data->pllm_upper_shift);
+ prediv = (val & pll_data->plld_mask);
+ postdiv = pll_data->postdiv;
+
+ rate /= (prediv + 1);
+ rate = (rate * (mult + 1));
+ rate /= postdiv;
+
+ return rate;
+}
+
+static const struct clk_ops clk_pll_ops = {
+ .recalc_rate = clk_pllclk_recalc,
+};
+
+static struct clk *clk_register_pll(struct device *dev,
+ const char *name,
+ const char *parent_name,
+ struct clk_pll_data *pll_data)
+{
+ struct clk_init_data init;
+ struct clk_pll *pll;
+ struct clk *clk;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+ init.ops = &clk_pll_ops;
+ init.flags = 0;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ pll->pll_data = pll_data;
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ goto out;
+
+ return clk;
+out:
+ kfree(pll);
+ return NULL;
+}
+
+/**
+ * _of_clk_init - PLL initialisation via DT
+ * @node: device tree node for this clock
+ * @pllctrl: If true, lower 6 bits of multiplier is in pllm register of
+ * pll controller, else it is in the control regsiter0(bit 11-6)
+ */
+static void __init _of_pll_clk_init(struct device_node *node, bool pllctrl)
+{
+ struct clk_pll_data *pll_data;
+ const char *parent_name;
+ struct clk *clk;
+ int i;
+
+ pll_data = kzalloc(sizeof(*pll_data), GFP_KERNEL);
+ if (!pll_data) {
+ pr_err("%s: Out of memory\n", __func__);
+ return;
+ }
+
+ parent_name = of_clk_get_parent_name(node, 0);
+ if (of_property_read_u32(node, "fixed-postdiv", &pll_data->postdiv))
+ goto out;
+
+ i = of_property_match_string(node, "reg-names", "control");
+ pll_data->pll_ctl0 = of_iomap(node, i);
+ if (!pll_data->pll_ctl0) {
+ pr_err("%s: ioremap failed\n", __func__);
+ goto out;
+ }
+
+ pll_data->pllm_lower_mask = PLLM_LOW_MASK;
+ pll_data->pllm_upper_shift = PLLM_HIGH_SHIFT;
+ pll_data->plld_mask = PLLD_MASK;
+ pll_data->has_pllctrl = pllctrl;
+ if (!pll_data->has_pllctrl) {
+ pll_data->pllm_upper_mask = PLLM_HIGH_MASK;
+ } else {
+ pll_data->pllm_upper_mask = MAIN_PLLM_HIGH_MASK;
+ i = of_property_match_string(node, "reg-names", "multiplier");
+ pll_data->pllm = of_iomap(node, i);
+ if (!pll_data->pllm) {
+ iounmap(pll_data->pll_ctl0);
+ goto out;
+ }
+ }
+
+ clk = clk_register_pll(NULL, node->name, parent_name, pll_data);
+ if (clk) {
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ return;
+ }
+
+out:
+ pr_err("%s: error initializing pll %s\n", __func__, node->name);
+ kfree(pll_data);
+}
+
+/**
+ * of_keystone_pll_clk_init - PLL initialisation DT wrapper
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_pll_clk_init(struct device_node *node)
+{
+ _of_pll_clk_init(node, false);
+}
+CLK_OF_DECLARE(keystone_pll_clock, "ti,keystone,pll-clock",
+ of_keystone_pll_clk_init);
+
+/**
+ * of_keystone_pll_main_clk_init - Main PLL initialisation DT wrapper
+ * @node: device tree node for this clock
+ */
+static void __init of_keystone_main_pll_clk_init(struct device_node *node)
+{
+ _of_pll_clk_init(node, true);
+}
+CLK_OF_DECLARE(keystone_main_pll_clock, "ti,keystone,main-pll-clock",
+ of_keystone_main_pll_clk_init);
+
+/**
+ * of_pll_div_clk_init - PLL divider setup function
+ * @node: device tree node for this clock
+ */
+static void __init of_pll_div_clk_init(struct device_node *node)
+{
+ const char *parent_name;
+ void __iomem *reg;
+ u32 shift, mask;
+ struct clk *clk;
+ const char *clk_name = node->name;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ reg = of_iomap(node, 0);
+ if (!reg) {
+ pr_err("%s: ioremap failed\n", __func__);
+ return;
+ }
+
+ parent_name = of_clk_get_parent_name(node, 0);
+ if (!parent_name) {
+ pr_err("%s: missing parent clock\n", __func__);
+ return;
+ }
+
+ if (of_property_read_u32(node, "bit-shift", &shift)) {
+ pr_err("%s: missing 'shift' property\n", __func__);
+ return;
+ }
+
+ if (of_property_read_u32(node, "bit-mask", &mask)) {
+ pr_err("%s: missing 'bit-mask' property\n", __func__);
+ return;
+ }
+
+ clk = clk_register_divider(NULL, clk_name, parent_name, 0, reg, shift,
+ mask, 0, NULL);
+ if (clk)
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ else
+ pr_err("%s: error registering divider %s\n", __func__, clk_name);
+}
+CLK_OF_DECLARE(pll_divider_clock, "ti,keystone,pll-divider-clock", of_pll_div_clk_init);
+
+/**
+ * of_pll_mux_clk_init - PLL mux setup function
+ * @node: device tree node for this clock
+ */
+static void __init of_pll_mux_clk_init(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 shift, mask;
+ struct clk *clk;
+ const char *parents[2];
+ const char *clk_name = node->name;
+
+ of_property_read_string(node, "clock-output-names", &clk_name);
+ reg = of_iomap(node, 0);
+ if (!reg) {
+ pr_err("%s: ioremap failed\n", __func__);
+ return;
+ }
+
+ parents[0] = of_clk_get_parent_name(node, 0);
+ parents[1] = of_clk_get_parent_name(node, 1);
+ if (!parents[0] || !parents[1]) {
+ pr_err("%s: missing parent clocks\n", __func__);
+ return;
+ }
+
+ if (of_property_read_u32(node, "bit-shift", &shift)) {
+ pr_err("%s: missing 'shift' property\n", __func__);
+ return;
+ }
+
+ if (of_property_read_u32(node, "bit-mask", &mask)) {
+ pr_err("%s: missing 'bit-mask' property\n", __func__);
+ return;
+ }
+
+ clk = clk_register_mux(NULL, clk_name, (const char **)&parents,
+ ARRAY_SIZE(parents) , 0, reg, shift, mask,
+ 0, NULL);
+ if (clk)
+ of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ else
+ pr_err("%s: error registering mux %s\n", __func__, clk_name);
+}
+CLK_OF_DECLARE(pll_mux_clock, "ti,keystone,pll-mux-clock", of_pll_mux_clk_init);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-20 11:28:58 +0000