diff options
Diffstat (limited to 'drivers/clk/sunxi')
| -rw-r--r-- | drivers/clk/sunxi/clk-sunxi.c | 28 |
1 files changed, 16 insertions, 12 deletions
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index d4694937276..570202582dc 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -245,9 +245,9 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate, } /** - * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6 - * PLL6 rate is calculated as follows - * rate = parent_rate * n * (k + 1) / 2 + * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6x2 + * PLL6x2 rate is calculated as follows + * rate = parent_rate * (n + 1) * (k + 1) * parent_rate is always 24Mhz */ @@ -256,13 +256,7 @@ static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, { u8 div; - /* - * We always have 24MHz / 2, so we can just say that our - * parent clock is 12MHz. - */ - parent_rate = parent_rate / 2; - - /* Normalize value to a parent_rate multiple (24M / 2) */ + /* Normalize value to a parent_rate multiple (24M) */ div = *freq / parent_rate; *freq = parent_rate * div; @@ -274,7 +268,7 @@ static void sun6i_a31_get_pll6_factors(u32 *freq, u32 parent_rate, if (*k > 3) *k = 3; - *n = DIV_ROUND_UP(div, (*k+1)); + *n = DIV_ROUND_UP(div, (*k+1)) - 1; } /** @@ -445,6 +439,7 @@ static struct clk_factors_config sun6i_a31_pll6_config = { .nwidth = 5, .kshift = 4, .kwidth = 2, + .n_start = 1, }; static struct clk_factors_config sun4i_apb1_config = { @@ -504,6 +499,7 @@ static const struct factors_data sun6i_a31_pll6_data __initconst = { .enable = 31, .table = &sun6i_a31_pll6_config, .getter = sun6i_a31_get_pll6_factors, + .name = "pll6x2", }; static const struct factors_data sun4i_apb1_data __initconst = { @@ -942,6 +938,14 @@ static const struct divs_data pll6_divs_data __initconst = { } }; +static const struct divs_data sun6i_a31_pll6_divs_data __initconst = { + .factors = &sun6i_a31_pll6_data, + .ndivs = 1, + .div = { + { .fixed = 2 }, /* normal output */ + } +}; + /** * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks * @@ -1082,7 +1086,6 @@ static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,}, {.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,}, {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, - {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} @@ -1101,6 +1104,7 @@ static const struct of_device_id clk_div_match[] __initconst = { static const struct of_device_id clk_divs_match[] __initconst = { {.compatible = "allwinner,sun4i-a10-pll5-clk", .data = &pll5_divs_data,}, {.compatible = "allwinner,sun4i-a10-pll6-clk", .data = &pll6_divs_data,}, + {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_divs_data,}, {} }; |