diff options
Diffstat (limited to 'drivers/clk/sunxi')
| -rw-r--r-- | drivers/clk/sunxi/Makefile | 2 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-factors.c | 101 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-factors.h | 16 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-mod0.c | 283 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-sun6i-apb0-gates.c | 1 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-sun6i-apb0.c | 1 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-sun6i-ar100.c | 1 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-sun8i-apb0.c | 1 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-sun8i-mbus.c | 78 | ||||
| -rw-r--r-- | drivers/clk/sunxi/clk-sunxi.c | 161 |
10 files changed, 485 insertions, 160 deletions
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile index 6850cba3587..7ddc2b55384 100644 --- a/drivers/clk/sunxi/Makefile +++ b/drivers/clk/sunxi/Makefile @@ -5,6 +5,8 @@ obj-y += clk-sunxi.o clk-factors.o obj-y += clk-a10-hosc.o obj-y += clk-a20-gmac.o +obj-y += clk-mod0.o +obj-y += clk-sun8i-mbus.o obj-$(CONFIG_MFD_SUN6I_PRCM) += \ clk-sun6i-ar100.o clk-sun6i-apb0.o clk-sun6i-apb0-gates.o \ diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c index 2057c8ac648..f83ba097126 100644 --- a/drivers/clk/sunxi/clk-factors.c +++ b/drivers/clk/sunxi/clk-factors.c @@ -9,18 +9,18 @@ */ #include <linux/clk-provider.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/io.h> #include <linux/module.h> +#include <linux/of_address.h> #include <linux/slab.h> -#include <linux/io.h> -#include <linux/err.h> #include <linux/string.h> -#include <linux/delay.h> - #include "clk-factors.h" /* - * DOC: basic adjustable factor-based clock that cannot gate + * DOC: basic adjustable factor-based clock * * Traits of this clock: * prepare - clk_prepare only ensures that parents are prepared @@ -32,6 +32,8 @@ #define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw) +#define FACTORS_MAX_PARENTS 5 + #define SETMASK(len, pos) (((1U << (len)) - 1) << (pos)) #define CLRMASK(len, pos) (~(SETMASK(len, pos))) #define FACTOR_GET(bit, len, reg) (((reg) & SETMASK(len, bit)) >> (bit)) @@ -147,9 +149,96 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate, return 0; } -const struct clk_ops clk_factors_ops = { +static const struct clk_ops clk_factors_ops = { .determine_rate = clk_factors_determine_rate, .recalc_rate = clk_factors_recalc_rate, .round_rate = clk_factors_round_rate, .set_rate = clk_factors_set_rate, }; + +struct clk * __init sunxi_factors_register(struct device_node *node, + const struct factors_data *data, + spinlock_t *lock) +{ + struct clk *clk; + struct clk_factors *factors; + struct clk_gate *gate = NULL; + struct clk_mux *mux = NULL; + struct clk_hw *gate_hw = NULL; + struct clk_hw *mux_hw = NULL; + const char *clk_name = node->name; + const char *parents[FACTORS_MAX_PARENTS]; + void __iomem *reg; + int i = 0; + + reg = of_iomap(node, 0); + + /* if we have a mux, we will have >1 parents */ + while (i < FACTORS_MAX_PARENTS && + (parents[i] = of_clk_get_parent_name(node, i)) != NULL) + i++; + + /* + * some factor clocks, such as pll5 and pll6, may have multiple + * outputs, and have their name designated in factors_data + */ + if (data->name) + clk_name = data->name; + else + of_property_read_string(node, "clock-output-names", &clk_name); + + factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); + if (!factors) + return NULL; + + /* set up factors properties */ + factors->reg = reg; + factors->config = data->table; + factors->get_factors = data->getter; + factors->lock = lock; + + /* Add a gate if this factor clock can be gated */ + if (data->enable) { + gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); + if (!gate) { + kfree(factors); + return NULL; + } + + /* set up gate properties */ + gate->reg = reg; + gate->bit_idx = data->enable; + gate->lock = factors->lock; + gate_hw = &gate->hw; + } + + /* Add a mux if this factor clock can be muxed */ + if (data->mux) { + mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); + if (!mux) { + kfree(factors); + kfree(gate); + return NULL; + } + + /* set up gate properties */ + mux->reg = reg; + mux->shift = data->mux; + mux->mask = SUNXI_FACTORS_MUX_MASK; + mux->lock = factors->lock; + mux_hw = &mux->hw; + } + + clk = clk_register_composite(NULL, clk_name, + parents, i, + mux_hw, &clk_mux_ops, + &factors->hw, &clk_factors_ops, + gate_hw, &clk_gate_ops, 0); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + clk_register_clkdev(clk, clk_name, NULL); + } + + return clk; +} diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h index d2d0efa3937..9913840018d 100644 --- a/drivers/clk/sunxi/clk-factors.h +++ b/drivers/clk/sunxi/clk-factors.h @@ -3,9 +3,12 @@ #include <linux/clk-provider.h> #include <linux/clkdev.h> +#include <linux/spinlock.h> #define SUNXI_FACTORS_NOT_APPLICABLE (0) +#define SUNXI_FACTORS_MUX_MASK 0x3 + struct clk_factors_config { u8 nshift; u8 nwidth; @@ -18,6 +21,14 @@ struct clk_factors_config { u8 n_start; }; +struct factors_data { + int enable; + int mux; + struct clk_factors_config *table; + void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); + const char *name; +}; + struct clk_factors { struct clk_hw hw; void __iomem *reg; @@ -26,5 +37,8 @@ struct clk_factors { spinlock_t *lock; }; -extern const struct clk_ops clk_factors_ops; +struct clk * __init sunxi_factors_register(struct device_node *node, + const struct factors_data *data, + spinlock_t *lock); + #endif diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c new file mode 100644 index 00000000000..4a563850ee6 --- /dev/null +++ b/drivers/clk/sunxi/clk-mod0.c @@ -0,0 +1,283 @@ +/* + * Copyright 2013 Emilio López + * + * Emilio López <emilio@elopez.com.ar> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of_address.h> + +#include "clk-factors.h" + +/** + * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks + * MOD0 rate is calculated as follows + * rate = (parent_rate >> p) / (m + 1); + */ + +static void sun4i_a10_get_mod0_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div, calcm, calcp; + + /* These clocks can only divide, so we will never be able to achieve + * frequencies higher than the parent frequency */ + if (*freq > parent_rate) + *freq = parent_rate; + + div = DIV_ROUND_UP(parent_rate, *freq); + + if (div < 16) + calcp = 0; + else if (div / 2 < 16) + calcp = 1; + else if (div / 4 < 16) + calcp = 2; + else + calcp = 3; + + calcm = DIV_ROUND_UP(div, 1 << calcp); + + *freq = (parent_rate >> calcp) / calcm; + + /* we were called to round the frequency, we can now return */ + if (n == NULL) + return; + + *m = calcm - 1; + *p = calcp; +} + +/* user manual says "n" but it's really "p" */ +static struct clk_factors_config sun4i_a10_mod0_config = { + .mshift = 0, + .mwidth = 4, + .pshift = 16, + .pwidth = 2, +}; + +static const struct factors_data sun4i_a10_mod0_data __initconst = { + .enable = 31, + .mux = 24, + .table = &sun4i_a10_mod0_config, + .getter = sun4i_a10_get_mod0_factors, +}; + +static DEFINE_SPINLOCK(sun4i_a10_mod0_lock); + +static void __init sun4i_a10_mod0_setup(struct device_node *node) +{ + sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun4i_a10_mod0_lock); +} +CLK_OF_DECLARE(sun4i_a10_mod0, "allwinner,sun4i-a10-mod0-clk", sun4i_a10_mod0_setup); + +static DEFINE_SPINLOCK(sun5i_a13_mbus_lock); + +static void __init sun5i_a13_mbus_setup(struct device_node *node) +{ + struct clk *mbus = sunxi_factors_register(node, &sun4i_a10_mod0_data, &sun5i_a13_mbus_lock); + + /* The MBUS clocks needs to be always enabled */ + __clk_get(mbus); + clk_prepare_enable(mbus); +} +CLK_OF_DECLARE(sun5i_a13_mbus, "allwinner,sun5i-a13-mbus-clk", sun5i_a13_mbus_setup); + +struct mmc_phase_data { + u8 offset; +}; + +struct mmc_phase { + struct clk_hw hw; + void __iomem *reg; + struct mmc_phase_data *data; + spinlock_t *lock; +}; + +#define to_mmc_phase(_hw) container_of(_hw, struct mmc_phase, hw) + +static int mmc_get_phase(struct clk_hw *hw) +{ + struct clk *mmc, *mmc_parent, *clk = hw->clk; + struct mmc_phase *phase = to_mmc_phase(hw); + unsigned int mmc_rate, mmc_parent_rate; + u16 step, mmc_div; + u32 value; + u8 delay; + + value = readl(phase->reg); + delay = (value >> phase->data->offset) & 0x3; + + if (!delay) + return 180; + + /* Get the main MMC clock */ + mmc = clk_get_parent(clk); + if (!mmc) + return -EINVAL; + + /* And its rate */ + mmc_rate = clk_get_rate(mmc); + if (!mmc_rate) + return -EINVAL; + + /* Now, get the MMC parent (most likely some PLL) */ + mmc_parent = clk_get_parent(mmc); + if (!mmc_parent) + return -EINVAL; + + /* And its rate */ + mmc_parent_rate = clk_get_rate(mmc_parent); + if (!mmc_parent_rate) + return -EINVAL; + + /* Get MMC clock divider */ + mmc_div = mmc_parent_rate / mmc_rate; + + step = DIV_ROUND_CLOSEST(360, mmc_div); + return delay * step; +} + +static int mmc_set_phase(struct clk_hw *hw, int degrees) +{ + struct clk *mmc, *mmc_parent, *clk = hw->clk; + struct mmc_phase *phase = to_mmc_phase(hw); + unsigned int mmc_rate, mmc_parent_rate; + unsigned long flags; + u32 value; + u8 delay; + + /* Get the main MMC clock */ + mmc = clk_get_parent(clk); + if (!mmc) + return -EINVAL; + + /* And its rate */ + mmc_rate = clk_get_rate(mmc); + if (!mmc_rate) + return -EINVAL; + + /* Now, get the MMC parent (most likely some PLL) */ + mmc_parent = clk_get_parent(mmc); + if (!mmc_parent) + return -EINVAL; + + /* And its rate */ + mmc_parent_rate = clk_get_rate(mmc_parent); + if (!mmc_parent_rate) + return -EINVAL; + + if (degrees != 180) { + u16 step, mmc_div; + + /* Get MMC clock divider */ + mmc_div = mmc_parent_rate / mmc_rate; + + /* + * We can only outphase the clocks by multiple of the + * PLL's period. + * + * Since the MMC clock in only a divider, and the + * formula to get the outphasing in degrees is deg = + * 360 * delta / period + * + * If we simplify this formula, we can see that the + * only thing that we're concerned about is the number + * of period we want to outphase our clock from, and + * the divider set by the MMC clock. + */ + step = DIV_ROUND_CLOSEST(360, mmc_div); + delay = DIV_ROUND_CLOSEST(degrees, step); + } else { + delay = 0; + } + + spin_lock_irqsave(phase->lock, flags); + value = readl(phase->reg); + value &= ~GENMASK(phase->data->offset + 3, phase->data->offset); + value |= delay << phase->data->offset; + writel(value, phase->reg); + spin_unlock_irqrestore(phase->lock, flags); + + return 0; +} + +static const struct clk_ops mmc_clk_ops = { + .get_phase = mmc_get_phase, + .set_phase = mmc_set_phase, +}; + +static void __init sun4i_a10_mmc_phase_setup(struct device_node *node, + struct mmc_phase_data *data) +{ + const char *parent_names[1] = { of_clk_get_parent_name(node, 0) }; + struct clk_init_data init = { + .num_parents = 1, + .parent_names = parent_names, + .ops = &mmc_clk_ops, + }; + + struct mmc_phase *phase; + struct clk *clk; + + phase = kmalloc(sizeof(*phase), GFP_KERNEL); + if (!phase) + return; + + phase->hw.init = &init; + + phase->reg = of_iomap(node, 0); + if (!phase->reg) + goto err_free; + + phase->data = data; + phase->lock = &sun4i_a10_mod0_lock; + + if (of_property_read_string(node, "clock-output-names", &init.name)) + init.name = node->name; + + clk = clk_register(NULL, &phase->hw); + if (IS_ERR(clk)) + goto err_unmap; + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + + return; + +err_unmap: + iounmap(phase->reg); +err_free: + kfree(phase); +} + + +static struct mmc_phase_data mmc_output_clk = { + .offset = 8, +}; + +static struct mmc_phase_data mmc_sample_clk = { + .offset = 20, +}; + +static void __init sun4i_a10_mmc_output_setup(struct device_node *node) +{ + sun4i_a10_mmc_phase_setup(node, &mmc_output_clk); +} +CLK_OF_DECLARE(sun4i_a10_mmc_output, "allwinner,sun4i-a10-mmc-output-clk", sun4i_a10_mmc_output_setup); + +static void __init sun4i_a10_mmc_sample_setup(struct device_node *node) +{ + sun4i_a10_mmc_phase_setup(node, &mmc_sample_clk); +} +CLK_OF_DECLARE(sun4i_a10_mmc_sample, "allwinner,sun4i-a10-mmc-sample-clk", sun4i_a10_mmc_sample_setup); diff --git a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c index e10d0521ec7..64f3e46d383 100644 --- a/drivers/clk/sunxi/clk-sun6i-apb0-gates.c +++ b/drivers/clk/sunxi/clk-sun6i-apb0-gates.c @@ -99,7 +99,6 @@ static int sun6i_a31_apb0_gates_clk_probe(struct platform_device *pdev) static struct platform_driver sun6i_a31_apb0_gates_clk_driver = { .driver = { .name = "sun6i-a31-apb0-gates-clk", - .owner = THIS_MODULE, .of_match_table = sun6i_a31_apb0_gates_clk_dt_ids, }, .probe = sun6i_a31_apb0_gates_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun6i-apb0.c b/drivers/clk/sunxi/clk-sun6i-apb0.c index 1fa23371c8c..70763600aea 100644 --- a/drivers/clk/sunxi/clk-sun6i-apb0.c +++ b/drivers/clk/sunxi/clk-sun6i-apb0.c @@ -65,7 +65,6 @@ static const struct of_device_id sun6i_a31_apb0_clk_dt_ids[] = { static struct platform_driver sun6i_a31_apb0_clk_driver = { .driver = { .name = "sun6i-a31-apb0-clk", - .owner = THIS_MODULE, .of_match_table = sun6i_a31_apb0_clk_dt_ids, }, .probe = sun6i_a31_apb0_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun6i-ar100.c b/drivers/clk/sunxi/clk-sun6i-ar100.c index eca8ca025b6..acca53290be 100644 --- a/drivers/clk/sunxi/clk-sun6i-ar100.c +++ b/drivers/clk/sunxi/clk-sun6i-ar100.c @@ -221,7 +221,6 @@ static const struct of_device_id sun6i_a31_ar100_clk_dt_ids[] = { static struct platform_driver sun6i_a31_ar100_clk_driver = { .driver = { .name = "sun6i-a31-ar100-clk", - .owner = THIS_MODULE, .of_match_table = sun6i_a31_ar100_clk_dt_ids, }, .probe = sun6i_a31_ar100_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun8i-apb0.c b/drivers/clk/sunxi/clk-sun8i-apb0.c index 1f5ba9b4b8c..155d0022194 100644 --- a/drivers/clk/sunxi/clk-sun8i-apb0.c +++ b/drivers/clk/sunxi/clk-sun8i-apb0.c @@ -56,7 +56,6 @@ static const struct of_device_id sun8i_a23_apb0_clk_dt_ids[] = { static struct platform_driver sun8i_a23_apb0_clk_driver = { .driver = { .name = "sun8i-a23-apb0-clk", - .owner = THIS_MODULE, .of_match_table = sun8i_a23_apb0_clk_dt_ids, }, .probe = sun8i_a23_apb0_clk_probe, diff --git a/drivers/clk/sunxi/clk-sun8i-mbus.c b/drivers/clk/sunxi/clk-sun8i-mbus.c new file mode 100644 index 00000000000..8e49b44cee4 --- /dev/null +++ b/drivers/clk/sunxi/clk-sun8i-mbus.c @@ -0,0 +1,78 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai <wens@csie.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/of_address.h> + +#include "clk-factors.h" + +/** + * sun8i_a23_get_mbus_factors() - calculates m factor for MBUS clocks + * MBUS rate is calculated as follows + * rate = parent_rate / (m + 1); + */ + +static void sun8i_a23_get_mbus_factors(u32 *freq, u32 parent_rate, + u8 *n, u8 *k, u8 *m, u8 *p) +{ + u8 div; + + /* + * These clocks can only divide, so we will never be able to + * achieve frequencies higher than the parent frequency + */ + if (*freq > parent_rate) + *freq = parent_rate; + + div = DIV_ROUND_UP(parent_rate, *freq); + + if (div > 8) + div = 8; + + *freq = parent_rate / div; + + /* we were called to round the frequency, we can now return */ + if (m == NULL) + return; + + *m = div - 1; +} + +static struct clk_factors_config sun8i_a23_mbus_config = { + .mshift = 0, + .mwidth = 3, +}; + +static const struct factors_data sun8i_a23_mbus_data __initconst = { + .enable = 31, + .mux = 24, + .table = &sun8i_a23_mbus_config, + .getter = sun8i_a23_get_mbus_factors, +}; + +static DEFINE_SPINLOCK(sun8i_a23_mbus_lock); + +static void __init sun8i_a23_mbus_setup(struct device_node *node) +{ + struct clk *mbus = sunxi_factors_register(node, &sun8i_a23_mbus_data, + &sun8i_a23_mbus_lock); + + /* The MBUS clocks needs to be always enabled */ + __clk_get(mbus); + clk_prepare_enable(mbus); +} +CLK_OF_DECLARE(sun8i_a23_mbus, "allwinner,sun8i-a23-mbus-clk", sun8i_a23_mbus_setup); diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index b654b7b1d13..d5dc951264c 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -19,6 +19,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/reset-controller.h> +#include <linux/spinlock.h> #include "clk-factors.h" @@ -319,46 +320,6 @@ static void sun4i_get_apb1_factors(u32 *freq, u32 parent_rate, -/** - * sun4i_get_mod0_factors() - calculates m, n factors for MOD0-style clocks - * MOD0 rate is calculated as follows - * rate = (parent_rate >> p) / (m + 1); - */ - -static void sun4i_get_mod0_factors(u32 *freq, u32 parent_rate, - u8 *n, u8 *k, u8 *m, u8 *p) -{ - u8 div, calcm, calcp; - - /* These clocks can only divide, so we will never be able to achieve - * frequencies higher than the parent frequency */ - if (*freq > parent_rate) - *freq = parent_rate; - - div = DIV_ROUND_UP(parent_rate, *freq); - - if (div < 16) - calcp = 0; - else if (div / 2 < 16) - calcp = 1; - else if (div / 4 < 16) - calcp = 2; - else - calcp = 3; - - calcm = DIV_ROUND_UP(div, 1 << calcp); - - *freq = (parent_rate >> calcp) / calcm; - - /* we were called to round the frequency, we can now return */ - if (n == NULL) - return; - - *m = calcm - 1; - *p = calcp; -} - - /** * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B @@ -440,16 +401,6 @@ EXPORT_SYMBOL(clk_sunxi_mmc_phase_control); * sunxi_factors_clk_setup() - Setup function for factor clocks */ -#define SUNXI_FACTORS_MUX_MASK 0x3 - -struct factors_data { - int enable; - int mux; - struct clk_factors_config *table; - void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p); - const char *name; -}; - static struct clk_factors_config sun4i_pll1_config = { .nshift = 8, .nwidth = 5, @@ -504,14 +455,6 @@ static struct clk_factors_config sun4i_apb1_config = { }; /* user manual says "n" but it's really "p" */ -static struct clk_factors_config sun4i_mod0_config = { - .mshift = 0, - .mwidth = 4, - .pshift = 16, - .pwidth = 2, -}; - -/* user manual says "n" but it's really "p" */ static struct clk_factors_config sun7i_a20_out_config = { .mshift = 8, .mwidth = 5, @@ -568,13 +511,6 @@ static const struct factors_data sun4i_apb1_data __initconst = { .getter = sun4i_get_apb1_factors, }; -static const struct factors_data sun4i_mod0_data __initconst = { - .enable = 31, - .mux = 24, - .table = &sun4i_mod0_config, - .getter = sun4i_get_mod0_factors, -}; - static const struct factors_data sun7i_a20_out_data __initconst = { .enable = 31, .mux = 24, @@ -583,89 +519,9 @@ static const struct factors_data sun7i_a20_out_data __initconst = { }; static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, - const struct factors_data *data) + const struct factors_data *data) { - struct clk *clk; - struct clk_factors *factors; - struct clk_gate *gate = NULL; - struct clk_mux *mux = NULL; - struct clk_hw *gate_hw = NULL; - struct clk_hw *mux_hw = NULL; - const char *clk_name = node->name; - const char *parents[SUNXI_MAX_PARENTS]; - void __iomem *reg; - int i = 0; - - reg = of_iomap(node, 0); - - /* if we have a mux, we will have >1 parents */ - while (i < SUNXI_MAX_PARENTS && - (parents[i] = of_clk_get_parent_name(node, i)) != NULL) - i++; - - /* - * some factor clocks, such as pll5 and pll6, may have multiple - * outputs, and have their name designated in factors_data - */ - if (data->name) - clk_name = data->name; - else - of_property_read_string(node, "clock-output-names", &clk_name); - - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) - return NULL; - - /* Add a gate if this factor clock can be gated */ - if (data->enable) { - gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL); - if (!gate) { - kfree(factors); - return NULL; - } - - /* set up gate properties */ - gate->reg = reg; - gate->bit_idx = data->enable; - gate->lock = &clk_lock; - gate_hw = &gate->hw; - } - - /* Add a mux if this factor clock can be muxed */ - if (data->mux) { - mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL); - if (!mux) { - kfree(factors); - kfree(gate); - return NULL; - } - - /* set up gate properties */ - mux->reg = reg; - mux->shift = data->mux; - mux->mask = SUNXI_FACTORS_MUX_MASK; - mux->lock = &clk_lock; - mux_hw = &mux->hw; - } - - /* set up factors properties */ - factors->reg = reg; - factors->config = data->table; - factors->get_factors = data->getter; - factors->lock = &clk_lock; - - clk = clk_register_composite(NULL, clk_name, - parents, i, - mux_hw, &clk_mux_ops, - &factors->hw, &clk_factors_ops, - gate_hw, &clk_gate_ops, 0); - - if (!IS_ERR(clk)) { - of_clk_add_provider(node, of_clk_src_simple_get, clk); - clk_register_clkdev(clk, clk_name, NULL); - } - - return clk; + return sunxi_factors_register(node, data, &clk_lock); } @@ -762,10 +618,19 @@ static const struct div_data sun4i_ahb_data __initconst = { .width = 2, }; +static const struct clk_div_table sun4i_apb0_table[] __initconst = { + { .val = 0, .div = 2 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 8 }, + { } /* sentinel */ +}; + static const struct div_data sun4i_apb0_data __initconst = { .shift = 8, .pow = 1, .width = 2, + .table = sun4i_apb0_table, }; static const struct div_data sun6i_a31_apb2_div_data __initconst = { @@ -1199,7 +1064,6 @@ static const struct of_device_id clk_factors_match[] __initconst = { {.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,}, {.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,}, {.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,}, - {.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,}, {.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,}, {} }; @@ -1311,7 +1175,6 @@ static void __init sun4i_a10_init_clocks(struct device_node *node) CLK_OF_DECLARE(sun4i_a10_clk_init, "allwinner,sun4i-a10", sun4i_a10_init_clocks); static const char *sun5i_critical_clocks[] __initdata = { - "mbus", "pll5_ddr", "ahb_sdram", }; |